KITZ截止阀样本
截止阀
目录
截止阀简介
截止阀的工作原理
截止阀的分类1.根据截止阀的通道方向，分为：
2.根据截止分类：
优点与缺点1、优点
2、缺点
3、使用优点
结构与安装注意事项
截止阀相关知识
截止阀的操作截止阀简介
截止阀的工作原理
截止阀的分类 1.根据截止阀的通道方向，分为：
编辑本段结构与安装注意事项
截止阀的结构形式： 截止阀阀体的结构形式有直通式、直流式和直角式。直通式是最常见的结构，但其流体的阻力最大。直流式流体阻力较小，多用于含固体颗粒或粘度大的流体。直角式阀体多采用锻造，适用于较小通经、较高压力的的截止阀。 截止阀的安装与维护应注意以下事项： 1、手轮、手柄操作的截止阀可安装在管道的任何位置上。 2、手轮、手柄及伟动机构，不允许作起吊用。 3、介质的流向应与阀体所示箭头方向一致。 截止阀的主要标准： 1、GB/T 12233-2006《通用阀门 铁质截止阀与升降式止回阀》 2、GB/T 12235-2007《通用阀门 法兰连接钢制截止阀与升降止回阀》 3、JB/T53174-94《截止阀 产品质量分等》 4、JB/T53165-92《高压平衡截止阀》 5、GB/T 587-2008《船用法兰青铜截止阀》 6、GB/T 590-2008《船用法兰铸铁截止阀》 7、GB/T 8464-2008《铁制和铜制螺纹连接阀门》 8、GB8465.2-87《内螺纹连接闸阀、截止阀、球阀、止回阀 基本尺寸 铁制截止阀》
2.根据截止阀阀杆上螺纹的位置可分：
1）上螺纹阀杆截止阀：截止阀阀杆的螺纹在阀体的外面。其优点是阀杆不受介质侵蚀，便于润滑，此种结构采用比较普遍。 2）下螺纹阀杆截止阀：截止阀阀杆的螺纹在阀体内。这种结构阀杆螺纹与介质直接接触，易受侵蚀，并无法润滑。此种结构用于小口径和温度不高的地方。 国内生产截止阀的厂家比较多，连接尺寸也大多不统一。主要分以下几个大类： 1）以JB／T2203－1999《截止阀结构长度》为主的通用类。目前国内大多数安全阀生产厂家均按本标准设计生产。如上海莱乐阀门有限公司、浙江罗浮锅炉附件厂、杭州截止阀厂、上海良众阀门有限公司、上海截止阀厂、开封高压截止阀厂、海安截止阀厂等。但本标准也不尽完美，规格不全，单闸板截止阀最大公称通径为DN1200，双闸板截止阀最大公称通径 DN1500。根据厂所生产的截止阀规格及掌握的资料来看，目前角式截止阀公称通径最小为DN15，Z型直通式截止阀公称通径达到DN2000。经考证，各厂家连接尺寸也不尽统一，如 DN150Z型直通式截止阀，上海良众阀门厂、上海截止阀厂及上海雅泽阀门厂各不相同。为了有一个统一的标准，用户在选用及安装时同一规格能够互换，建议中国通用机械研究所对JB／T2203－1999《截止阀结构长度》进行修订。建议设计院及用户按标准选用，截止阀生产厂家按标准设计制造。 3.根据用途
佛尼斯锻钢阀样本
典型材料表 Main parts materials list
序号 No
1
零件名称 Part name
阀体Body
A105
材料Materials A350-LF2 A182-F5 A182-F11 A182-F22 A182-304 A182-304L A182-316 A182-316L
2
阀座Seat ring
5 润滑垫圈Washer
A276-410
6 手轮Handwheel
A197,A47
7 名牌Nameplate
8
锁紧螺母 H.W.Lock nut
9
螺纹Thread
铝Aluminum A108-1020 A276-410
10
阀杆Stem
A276-410
A276-304 A276-304L A276-316 A276-316L F51
特征和应用规范
1. 设计制造:API602,ANSI B16.34,BS5352,GB/T12224,GB/T12228,GB/T12234 2. 承插焊端:ANSI B16.11,JB/T175-95 3. 螺纹端:ANSI B1.20.1(NPT),GB/T7306-87(RC) 4. 对焊端:ANSI B16.25,GB/T12224 5. 法兰端:ANSI B16.5,JB/T82.1~82.4-94 6. 法兰阀门结构长度:ANSI B16.10,JB/T97-95 7. 结构特征:螺栓连接或焊接阀盖,明杆支架 8. 阀门的检验和试验:API598,GB/T13927,JB/T9092 9. 主体材质:A105,LF2,F5,F11,F22,F304,F316,F304L,F316L,F347,F321,F91,Monel,Alloy20
截止阀的基本概念和主要标准
截止阀的基本概念和主要标准内容来源自网络截止阀是一种常用的截断阀,主要用来接通或截断管路中的介质,一般不用于调节流量．截止阀适用压力、温度范围很大,但一般用于中、小口径的管道．截止阀的主要标准GB12233-89《通用阀门铁制截止阀与升降式止回阀》G截止阀是一种常用的截断阀,主要用来接通或截断管路中的介质,一般不用于调节流量．截止阀适用压力、温度范围很大,但一般用于中、小口径的管道．截止阀的主要标准GB12233-89《通用阀门铁制截止阀与升降式止回阀》GB12235-89《通用阀门法兰连接钢制截止阀与升降式止回阀》JB/T53174-94《截止阀产品质量分等》JB/T53165-92《高压平衡截止阀产品质量分等》GB/T587-93《船用法兰青铜截止阀》GB/T590-93《船用法兰铸铁截止阀》GB8464-87《内螺纹连接闸阀、截止阀、球阀、止回阀通用技术条件》GB8465.2-87《内螺纹连接闸阀、截止阀、球阀、止回阀基本尺寸铁制截止阀》采购前阀门选型的步骤和依据：在流体管道系统中，阀门是控制元件，其主要作用是隔离设备和管道系统、调节流量、防止回流、调节和排泄压力。
由于管道系统选择最适合的阀门显得非常重要，所以，了解阀门的特性及选择阀门的步骤和依据也变得至关重要起来。
阀门行业到目前为止，已能生产种类齐全的闸阀、截止阀、节流阀、旋塞阀、球阀、电动阀、隔膜阀、止回阀、安全阀、减压阀、蒸汽疏水阀和紧急切断阀等12大类、3000多个型号、4000多个规格的阀门产品；最高工作压力为600MPa，最大公称通径达5350mm，最高工作温度为1200℃，最低工作温度为-196℃，适用介质为水、蒸汽、油品、天然气、强腐蚀性介质（如浓硝酸、中浓度硫酸等）、易燃介质（如笨、乙烯等）、有毒介质（如硫化氢）、易爆介质及带放射性介质（金属钠、-回路纯水等）。
阀门承压件材质铸铜、铸铁、球墨铸铁、高硅铸铁、铸钢、锻钢、高、低合金钢、不锈耐酸钢、哈氏合金、因科镍尔、蒙乃尔合金、双相不锈钢、钛合金等。
截止阀尺寸规格对照表及说明
1、DN 是代表公称通径尺寸；
2、L 是代表阀体的总长度；
3、H 是代表阀体的总高度
4、D 是代表法兰盘外径
5、D1 是代表螺丝孔中心距
6、D2 是代表法兰水线外径
7、b 是代表法兰的厚度
8、n-Φd 是代表法兰螺丝孔直径及数量
9、不同截止阀都需要一个外形结构图作为参考对照。
三、外形结构图
1.6MPa DN
200
370
280
400
280
415
320
460
360
510
450
710
500
786
550
925
600
280
240
210
24
8-Φ23
600
335
295
265
26
12-Φ23
650
405
335
320
30
12-Φ25
750
460
410
375
30
12-Φ25
备注：以上是以 1.6MPa 国标截止阀尺寸作为本文说明及介绍。
H
D0
198
120
218
120
258
140
275
140
280
160
330
180
350
截止阀尺寸规格对照表及说明
截止阀尺寸规格对照表是按照 DN 换算英寸、其中不同类型的截止阀外形结构都 是不一样的，其尺寸都不一样。主要分长度、宽度、高度以及螺丝孔距等。
一、截止阀尺寸对照表（中/美）
口径
英寸
口径
英寸
DN15
1/2
DN200
KITZ 金属阀门与过滤器产品说明书
BIV-100-0603K I T Z C O R P O R A T I O N®BIV-2®ACCEPTANCEAll quotations are for acceptance within 30 days from date of quotation unless extended in writing. In the event a pur-chase order is placed after this time, the Seller’s company reserves the right to requote prices of all valves offered. All orders and contracts are subject to cred-it approval and acceptance by KITZ.FREIGHTAll materials will be shipped F.O.B.point of shipment – no freight allowance unless otherwise stated and agreed upon with the Buyer.PRICESThere will be added to all prices quoted any sales, excise, or similar tax which Seller may be required to collect on or in connection with the sale. Seller reserves the right to cancel any order in the event that selling prices shall be established by Federal, State or other governmental regulation with respect to the products covered by the order which shall be lower than the prices specified in the order.ESCALATION TERMSPrices shown in this price schedule reflect the costs in effect at the time of publication. These prices will remain firm on all products with a quoted deliv-ery of twenty six (26) weeks or less. On products with a quoted delivery of more than 26 weeks, the Seller has a right to price and invoice at the applicable price sheet in effect at the time of shipment.In no event will the invoiced price be less than price originally quoted.DEFERRED SHIPMENTSIf for any reason the Buyer desires to delay shipments more than 30 days after manufacturing or to place a hold or to stop the order during the manufacturing cycle, the Seller’s company reserves the right to consider the order cancelled and to invoke cancellation charges.CREDIT TERMSAs quoted. Overdue balances will be subject to 1.5% service charge per month on such indebtedness.DELIVERIESShipments made to the Buyer shall at all times be subject to the approval of Seller’s Credit Department. All schedules of shipments are estimated as closely as possible and Seller will use its best effort to ship within the time schedule but does not guarantee to do so. Seller shall not be liable for any direct, indi-rect, or consequential damage or loss caused by delay in delivery, regardless of the cause of delay. Items offered from stock are subject to prior sale.RETURNSNo returns are allowed without prior arrangements made with the Seller.Product considered for return must be in new, resalable condition and of current design.WARRANTYSeller will replace without charge or refund the purchase price of products manufactured by Seller which prove to be defective in material or workman-ship, provided in each case that the product is properly installed and is used in the service for which Seller recommends it and that written claim, specifying the alleged defect, is presented to the Seller within one year from the date of ship-ment. Seller shall in no event be respon-sible for claims of A) labor, expenses, or other damages occasioned by defective parts or products or for B) consequential or secondary damages. The Warranty stated in this paragraph is in lieu of all other warranties, either expressed or implied. With respect to warranties,this paragraph states Buyer’s exclusive remedy and Seller’s exclusive liability.DESIGNBecause of a policy of continuous prod-uct improvement, Seller reserves the right to change design, materials or spec-ifications without notice. There will be a charge for modifying an order after it has been entered when such change or modification results in additional engi-neering or clerical work for either KITZ or its suppliers.NOTEKITZ reserves the right to correct any obvious clerical errors in quotations,invoices and other contracts.A PRODUCT OF TECHNOLOGY2345 Code #42 (AK150LUT)A PRODUCT OF TECHNOLOGYAKH Code # 27Size 3/8” ~4”(Threaded)AK150LUT Code # 42TSize 1/4”~ 2”(Threaded)AK150E Code # 46 Size 3/8”~ 2”(Threaded)AK300LU Code # 37 Size 3/8”~ 2”(Threaded)A PRODUCT OF TECHNOLOGYAK125C Code # 11Size 1/2”~ 3”(Threaded)AK150D Code # 09 Size 1/4”~ 3”AKCA Code # 38 Size 1/4”~ 3”AK300JS Code # 17S Size 1/2”~ 2”AK300D Code # 18 Size 1/4”~ 2”AKG Code # 03Size 1/4”~ 3”A PRODUCT OF TECHNOLOGYAKR Code # 04Size 3/8” ~4”(Threaded)2 9134A PRODUCT OF TECHNOLOGY125 FCL Code # 72Size 2”~14”(Flanged)125 FCO Code # 78125FCOS Code # 79Code # 7022261345A PRODUCT OF TECHNOLOGYAKUJM Code # 33Size 3/8”~3”(Threaded)A PRODUCT OF TECHNOLOGY125FCYU Code # 80A PRODUCT OF TECHNOLOGY。
截止阀使用说明书english
Operational ManualType of product： Globe valveModel Number： 6”-J41H-150LBZHEJIANG MAILON VALVE CO.,LTD浙江迈隆阀门有限公司Date:1.Main Application:1．1 ApplicationSuch valve is mainly used as open and close device on the industrial pipelines for Petroluem, gas and chemicals.1．2 Range of ApplicationTemperature（℃） Medium Nominal pressure（LB）■ -29~425 ■ without corrosive ■ 150□ -29~595 □with corrosive □ 300□ -46~345 □ others □ 400□ -254~800 □ 600□ others □ 900□ 15002．Applicable standard□ ANSI□ API□ MSS□ BS□ ASTM■ others-(ASME B16.34)4．Main characteristics of design：4．1 valve type：□ angle type ■through way type □ Y-type □ others4．2 end connection：■ flange type □ welded type □ threaded type □ others 4．3 bonnet connection：■flanged □pressure retaining □welded □ others4．4 seat：■ parallel type □wedge type □ others4．5 disc：■ normal type □ balance type □ pilot-operated type □ others 4．6 Operation：■hand □electric □ others4．7 The globe has backseat sealing construction,but should replace packing without pressure.5．Main dimensionn and end connection：7．Installation and usage7．1 installation7．1．1 The installation postion of the valve shall be covenient for operation and maintenance.7．1．2 Before the installation of the valve,the following items must be checked whether they are in accordance with the usage condition:valve model number,performance specification,technical requirement,nameplate and marking,installation direction,etc. Especially the installtion direction must be correct.7．1．3 Before the installation,the dirt and rust in the cavity and on the sealing face shall be removed. 7．1．4 To check whether the bolt of the cover flange and the packing gland are tightened.To check the smoothness of the open and close operation.For valves with actuators,to check the travel position,to ensure the sealing but without overload.7．2Usage7．2．1The valve is for open and close,not suitable for adjusting function.It is not permitted to use it over the temperature and pressure limitation.For high temperature application,the bolts should tightened periodically to prevent it from leaking.Less heat grad is necessary.For low temperature application,the impact overload stress concentration is not permitted.7．2．2 For hand operated valve,the clockwise is close direction,and the anti-clockwise is open direction.For the other operation types,the control device indication for open/close shall be consistent with the open/close direction of the valve.8．Maintenance and storage8．1 Maintenance8．1．1 The valve in operation should be checked and maintained periodically to prevent it from rust and jamming.8．1．2 If leakage pls check whether the middle flange and packing gland is loosed,although there are backseat sealing but should not replace packing with pressure;8．1．3If the internal leakage at the sealing faces is found,pls check whether the valve is fully closed position.8．1．4When due time for maintenance of valve,all parts should be cleaned again to remove the dirt and rust.And also to replace the damaged gasket and sealing rings,to lap and adjust the sealingfaces.After maintenance,pls make new pressure test.If the valve is fixed with safety device,the setpressure of the safety device should be re-set as less than 1.1times of the pressure-temperaturevalue.8．2 Storage8．2．1 The valve should be stored in dired house.Stacked or stored in open air is forbidden.8．2．2 The stored valve should have end covers for protection.The naked position of the stem should be protected by oil paper,preventing from damaing.8．2．3 For long time stored valve,it should be maintained periodically:to clean the dirt and rust,re-coat the anti-rust oil/grease,to check the flexibility of operation with no jamming.。
止回阀样本全
止回阀系列样本天津市仪表集团 自动化仪表四厂天津精通控制仪表技术有限公司——天津市自动化仪表四厂改制公司ISO9001质量体系认证单位※123471类型H止回阀4法兰式7对夹式0浮球式1升降式2升降立式4单瓣旋启式6双瓣旋启式7蝶式双瓣X/J 橡胶/衬胶F/F S氟塑料/衬氟W 本体材料H Cr13Y 硬质合金T铜合金101.0MPa 16 1.6MPa 252.5MPa 404.0MPa/HT200QQT450C WCB P ZG1Cr18Ni9Ti RZG1Cr18Ni12Mo2TiB 1电镀球墨铸铁B 2铝青铜B 3ZG1Cr18Ni9TiB 5CF8M B 6碳钢B 7CF8B 8CF3M※止回阀型号编制：结构形式4密封面材料/衬里23连接形式5公称压力6 特殊标记：S 阀腔全衬蝶式7阀体材质内件材料止回阀简介H40J-10 型浮球式衬胶止回阀主要性能规范：适用温度 适用介质≤85℃弱酸碱等一般腐蚀性介质主要零件材料： 名称 材料 上阀体 灰铸铁衬橡胶 下阀体 灰铸铁衬橡胶 浮球铝球包覆橡胶主要尺寸及重量：公称通径DN 公称压力 Mpa工作压力MpaL D D 1Z-Ф B 重量 kg15150 95 65 4-14 95 3 20 150 105 75 4-14 100 3.5 25 160 115 85 4-14 125 5 40 190 150 110 4-19 145 7.5 50 220 165 125 4-19 165 10.5 65 270 185 145 4-19 205 16.5 80 300 200 160 8-19 240 21.5 100 1.01.0350 220 180 8-19 270 38 125 400 250 210 8-19 285 55 150 480 285 240 8-23 380 78.5 2001.00.649534029512-23440104法兰连接尺寸：GB/T17241.6(PN1.0MPa）H44J-10 型旋启式衬胶止回阀主要性能规范： 适用温度 适用介质≤85℃弱酸碱等一般腐蚀性介质主要零件材料： 名称 材料 上阀体 灰铸铁衬橡胶 下阀体 灰铸铁衬橡胶 阀瓣碳钢衬橡胶主要尺寸及重量：公称通径DN 公称压力 Mpa 工作压力MpaL D D 1Z-Ф B 重量 kg 25 160 115 85 4-14 128 4.5 32 180 135 100 4-18 150 7 40 200 145 110 4-18 160 8 50 230160 125 4-18 178 10 65 290 180 145 4-18 204 18 80 310 195 160 4-18 230 24 100 350 215 180 8-18 255 30.5 125 400 245 210 8-18 305 47.5 150 1.0 0.6 480280 240 8-23 345 63.5 200 0.6500 335 295 8-23 415 96.5 250 550 390 350 12-23 495 144 300 1.00.4698400440540224法兰连接尺寸：JB78(PN1.0MPa）H71□-1016 2540 对夹升降式止回阀主要尺寸及重量：尺寸(mm)配管法兰(供参考) 公称压力 PN MPa公称通径DN mm L D D 2D 3D 4D 5重量(kg)螺栓孔中心圆直径D1螺栓数量 螺栓直径d 螺栓长度L 115 16 52 15 24 31 40 0.1265 4 M12 75 20 19 62 19 30 40 50 0.2475 4 M12 90 25 22 72 24 36 47 58 0.3485 4 M12 90 3228 83 31 46 56 68 0.53100 4 M16 100 40 31.5 93 39 55 66 78 0.8 110 4 M16 105 50 40 108 48 65 78 90 1.2 125 4 M16 125 65 46 128 62 80 95 110 1.8 145 4 M16 130 80 50 142 76 96 110128 2.2 160 8 M16 135 100 60 162 95 115135150 3.4 180 8 M16 150 125 90 192 110 125132— 9 210 8 M16 180 PN1.0 / PN1.6 （短系列）150 106 218 127 150158— 14 240 8 / 12 M20 210 15 16 52 15 24 31 40 0.1265 4 M12 80 20 19 62 19 30 40 50 0.2475 4 M12 90 25 22 72 24 36 47 58 0.3485 4 M12 90 3228 83 31 46 56 68 0.53100 4 M16 110 40 31.5 93 39 55 66 78 0.8 110 4 M16 115 50 40 108 48 65 78 90 1.2 125 4 M16 125 65 46 128 62 80 95 110 1.8 145 8 M16 135 80 50 142 76 96 110128 2.2 160 8 M16 145 100 60 168 95 115135150 3.8 190 8 M20 160 125 90 194 110 125132— 9.2 220 8 M24 205 150 106 224 127 150158— 15 250 8 M24 225 PN2.5 /PN4.0 （短系列）200140284/291165200208—26/28310/32012M24/M27260/275止回阀类主要尺寸及重量：尺寸(mm)配管法兰(供参考)公称压力 PN MPa公称通径 DNmmLDD 2D 3D 4重量 (kg)螺栓孔 中心圆 直径D1螺栓数量螺栓 直径 d 螺栓 长度 L 115 25 52 15 25 25 0.3 65 4 M12 90 20 31.5 62 19 30 30 0.45 75 4 M12 100 25 35.5 72 24 36 36 0.6 85 4 M12 105 3240 83 31 43 43 0.8 100 4 M16 115 40 45 93 39 52 52 1.4 110 4 M16 120 50 56 108 48 62 62 2.3 125 4 M16 140 65 63 128 62 75 75 3 145 4 M16 150 80 71 142 76 90 90 3.8 160 8 M16 155 100 80 162 95 112 112 5 180 8 M16 170 125 110 192 110 125 132 11 210 8 M16 200 PN1.0 / PN1.6 （长系列）150 125 218 127 150 158 16 240 8/12 M20 225 15 25 52 15 25 25 0.3 65 4 M12 90 20 31.5 62 19 30 30 0.45 75 4 M12 100 25 35.5 72 24 36 36 0.6 85 4 M12 105 32 40 83 31 43 43 0.8 100 4 M16 115 4045 93 39 52 52 1.4 110 4 M16 120 50 56 108 48 62 62 2.3 125 4 M16 140 65 63 128 62 75 75 3 145 8 M16 150 80 71 142 76 90 90 3.8 160 8 M16 165 100 80 168 95 112 112 5.3 190 8 M20 180 125 110 194 110 125 132 12/13 220 8 M24 225 150 125 224 127 150 158 18/19 250 8 M24 245 PN2.5 /PN4.0 （长系列）200160284/29116520020830/32310/32012M24/M27285/295注：法兰连接尺寸符合GB/T9113.1。
kitz工业螺纹球阀（包括套管焊接和对接焊接端） carbon and stainless stee
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends)KITZ CORPORATION OF AMERICAINDUSTRIAL THREADED BALL VALVESCarbon and Stainless Steel– CONTENTS –• Figure Number Construction (1)UNIBODY/2-Piece and2-Piece Seal Welded• CODE NUMBERS (2)• TECHNICAL INFORMATIONProduct Overview (3)Pressure–Temperature Rating (3)Basic Design Standards (3)Test Pressures (3)• TECHNICAL DATAOperating Torque (4)Flow Coefficients (4)•DIMENSIONAL OUTLINES and MATERIALS OF CONSTRUCTION (5)3-Piece• CODE NUMBERS (8)• TECHNICAL INFORMATIONProduct Overview (9)Pressure–Temperature Rating (9)Basic Design Standards (9)Test Pressures (9)• TECHNICAL DATAOperating Torque (10)Flow Coefficients (10)•DIMENSIONAL OUTLINES and MATERIALS OF CONSTRUCTION (11)•OPTIONS and ACCESSORIES (14)• ADDITIONAL THREADED ITEMS (15)FIGURE NUMBER CONSTRUCTIONAK SC T K Z M FSO 1 2 3 4 5 6 7 8AK U T H W Z M1 2 3 4 9 5 6AW SC 3T F Z M FS 1 2 3 4 5 6 7 1-END CONNECTION AK - Tapered NPT (ASME B1.20.1)AW - Socket Weld (ASME B16.11)BW - Buttweld (ASME B16.25)AK/AW - Threaded x Socket Weld 2-SHELL MATERIAL SC - Carbon Steel U - Stainless Steel 3-VALVE TYPE T - Floating Ball 3T - 3-PC 4-PORT DESIGN K - Reduced H - Regular F - Full 5-MOUNTING PAD Z - Integral (ISO-5211on 3-pc)6-TRIM (Ball and Stem)M - 316SS 7- OPTIONS FS - Fire Tested per API 6078- OPERATOR () - Locking Lever O - Locking Oval 9-SPECIAL FEATURES W - Seal Welded--1CODE NUMBERS1-pc / 2-pc & 2-pc Seal WeldedFIRESAFE UNIBODY(Page5)AKSCTKZM-FS(CS/Locking Lever)-#119AKUTKZM-FS(SS/Locking Lever)-#129AKSCTKZM-FSO(CS/Locking Oval)-#119-LOHAKUTKZM-FSO(SS/Locking Oval)-#129-LOH2-Piece(Page6)AKSCTHZM(CS/Non-Firesafe/Locking Lever)-#217AKUTHZM(SS/Non-Firesafe/Locking Lever)-#227AKSCTHZM-FS(CS/Firesafe/Locking Lever)-#219AKUTHZM-FS(SS/Firesafe/Locking Lever)-#229AKSCTHZM-O(CS/Non-Firesafe/Locking Oval)-#217-LOHAKUTHZM-O(SS/Non-Firesafe/Locking Oval)-#227-LOHAKSCTHZM-FSO(CS/Firesafe/Locking Oval)-#219-LOHAKUTHZM-FSO(SS/Firesafe/Locking Oval)-#229-LOH2-Piece,Seal Welded(Page7)AKSCTHWZM(CS/Non-Firesafe/Locking Lever)-#237AKUTHWZM(SS/Non-Firesafe/Locking Lever)-#247AKSCTHWZM-FS(CS/Firesafe/Locking Lever)-#239AKUTHWZM-FS(SS/Firesafe/Locking Lever)-#249AKSCTHWZM-O(CS/Non-Firesafe/Locking Oval)-#237-LOHAKUTHWZM-O(SS/Non-Firesafe/Locking Oval)-#247-LOHAKSCTHWZM-FSO(CS/Firesafe/Locking Oval)-#239-LOHAKUTHWZM-FSO(SS/Firesafe/Locking Oval)-#249-LOH2TECHNICAL INFORMATIONPRODUCT OVERVIEWPRESSURE-TEMPERATURE RATINGBASIC DESIGNFIRESAFE UNIBODYFace-to Face Dimensions -KITZ StandardEnd Connections -ASME B1.20.1Wall Thickness -KITZ StandardPort -Reduced port in accordance with API 608Mounting Pad -KITZ StandardStandard Handle - Locking Oval (1/4”~1”)Locking Lever (1-1/4”~2”)Optional Locking Oval and Lever for other sizes2-Piece, Seal Welded Face-to Face Dimensions -KITZ Standard End Connections -ASME B1.20.1Wall Thickness -BS 5351Class 800(1/4”~1”)ASME B16.34Class 600(1-1/4”~2”)Port -Regular port in accordance with API 608Mounting Pad -KITZ Standard Standard Handle - Locking Oval (1/4”~1”)Locking Lever (1-1/4”~2”)Optional Locking Oval and Lever for other sizes Body Seat -Hypatite PTFE Body Seal -None (Seal welded construction)Pressure Rating - 2000WOG (1/4”~1)240WSP (1/4”~1)1500WOG (1-1/4”~2”)220WSP (1-1/4”~2”)NACE MR-01-75TEST PRESSURESTest Method -API 598Body Test Pressure - 3000psi,Hydrostatic (1/4”~1”)2250psi,Hydrostatic (1-1/4”~2”)Seat Test Pressure - 80psi,Air PRODUCT TYPEMATERIAL BASIC FIGURE STANDARD OPTIONS SIZE RANGE FIRESAFE UNIBODY ,REDUCED PORTTWO-PIECE REGULAR PORTTWO-PIECE REGULAR PORT,SEAL WELDED WCB CF8M WCB CF8M WCBCF8M AKSCTKZM-FS AKUTKZM-FS AKSCTHZM (-FS)AKUTHZM (-FS)AKSCTHWZM (-FS)AKUTHWZM (-FS)FIRESAFE (API 607)LOCKING OVAL LOCKING LEVER 1/4”,3/8”,1/2”,3/4”,1”,1-1/4”,1-1/2”,2”2-PieceFace-to Face Dimensions -KITZ StandardEnd Connections -ASME B1.20.1Wall Thickness -BS 5351Class 800(1/4”~1”)ASME B16.34Class 600(1-1/4”~2”)Port -Regular port in accordance with API 608Mounting Pad -KITZ StandardStandard Handle - Locking Oval (1/4”~1”)Locking Lever (1-1/4”~2”)Optional Locking Oval and Lever for othersizesBody Seat -Hypatite PTFEBody Seal -PTFE (Standard)/Flexible Graphite (FS)Pressure Rating - 2000WOG (1/4”~1)240WSP (1/4”~1)1500WOG (1-1/4”~2”)220WSP (1-1/4”~2”)NACE MR-01-75Body Seat -Hypatite PTFE Body Seal -Flexible Graphite Pressure Rating - 2000WOG (1/4”~1)240WSP (1/4”~1)1500WOG (1-1/4”~2”)220WSP (1-1/4”~2”)NACE MR-01-753OPERATING TORQUE, in-lbs*TECHNICAL DATA 1/4” 14.5 15 18 21 243/8” 19 20 25 30 351/2” 29 30 35 40 453/4” 44 45 50 55 601” 68 70 80 90 1001-1/4” 78 80 95 110 -1-1/2” 108 110 130 150 -2” 138 140 160 180 -VALVE SIZE up to 4005001,0001,5002,000DIFFERENTIAL PRESSURE,psiCARBON and STAINLESS STEELFIRESAFE UNIBODYFIGURE:AKSCTKZM-FS/AKUTKZM-FSVALVE APPROXSIZE Cv1/4” 2.23/8” 2.31/2” 4.33/4” 8.01” 12.01-1/4” 18.01-1/2” 32.02” 53.0FLOW COEFFICIENTOPERATING TORQUE, in-lbs*CARBON and STAINLESS STEEL2-pc and 2-pc SEAL WELDEDFIGURE:AKSCTHZM/AKUTHZM (-FS)and AKSCTHWZM/AKUTHWZM (-FS)FLOW COEFFICIENTVALVE APPROXSIZE Cv1/4” 4.03/8” 4.51/2” 5.03/4” 11.01” 24.01-1/4” 35.01-1/2” 74.02” 128.0*Values are for clean water at ambient temperature.KITZ recommends applying a safety factor when selecting an actuator.4UNIBODYAKSCTKZM-FS/AKUTKZM-FS 1/4”0.18 1.12 1.71 2.80 3.94 1.97 1/4NPT 0.72 - - -0.353/8” 0.27 1.16 1.87 3.23 3.94 2.05 3/8NPT 0.87 - - -0.371/2” 0.36 1.93 2.13 3.54 3.94 2.56 1/2NPT 1.10 0.50 1.12 No.10-24UNC 0.623/4” 0.49 2.05 2.24 3.54 3.94 2.76 3/4NPT 1.34 0.57 1.37 No.10-24UNC 0.861” 0.63 2.15 2.38 4.33 3.94 3.15 1NPT 1.57 0.87 1.37 No.10-24UNC 1.211-1/4” 0.79 2.34 2.58 4.33 3.94 3.74 1-1/4NPT 1.97 1.00 1.50 1/4-20UNC 1.921-1/2” 0.96 2.68 3.07 5.51 5.12 3.94 1-1/2NPT 2.24 1.00 1.50 1/4-20UNC 2.842” 1.26 2.89 3.29 5.51 5.12 4.49 2NPT 2.72 1.00 1.50 1/4-20UNC 4.26VALVESIZE d HL HO DL DO L d2S1P1P2T APPROX WT.lbs.DIMENSIONS , InchesNo PARTS Qty. MATERIALSMATERIALS ASTM SPECIFICATION 1 BODY 1 CAST STEELA216Gr.WCBSTAINLESS STEEL A351Gr.CF8M 3 STEM 1 STAINLESS STEELSTAINLESS STEEL A276Type 316 4 BALL 1 STAINLESS STEELSTAINLESS STEEL A276Type 316 7 GLAND 1 STAINLESS STEELSTAINLESS STEEL A276Type 304 8 GLAND PACKING 1 FLEXIBLE GRAPHITEFLEXIBLE GRAPHITE 9 HANDLE 1 CARBON STEEL (1)STAINLESS STEEL (1) 10 NUT 2 STAINLESS STEELSTAINLESS STEEL A194Gr.8 16 WASHER 1 STAINLESS STEELSTAINLESS STEEL A276Type 304 29 INSERT 1 STAINLESS STEELSTAINLESS STEEL A276Type 316or A351Gr.CF8M 30 BALL SEAT 2 HYPATITE PTFEHYPATITE PTFE 34 NUT 1 STAINLESS STEELSTAINLESS STEEL A194Gr.8(1/2”and LARGER) 47 THRUST WASHER 1 G/F PTFEG/F PTFE A LATCH LOCK 1 STAINLESS STEELSTAINLESS STEEL A276Type 430(1/2”and LARGER)NOTES:(1)PLASTIC COATEDCARBON STEELSTAINLESS STEEL MATERIALS OF CONSTRUCTIONDLHL52-PIECEAKSCTHZM (-FS)/AKUTHZM (-FS)DOHONo PARTS Qty. MATERIALS MATERIALS ASTM SPECIFICATION1 BODY 1 CAST STEEL A216Gr.WCBSTAINLESS STEEL A351Gr.CF8M2 BODY CAP 1 CAST STEEL A216Gr.WCBSTAINLESS STEEL A351Gr.CF8M3 STEM 1 STAINLESS STEEL STAINLESS STEEL A276Type 3164 BALL 1 STAINLESS STEEL STAINLESS STEEL A276Type 3167 GLAND 1 STAINLESS STEEL STAINLESS STEELA276Type 304 8 GLAND PACKING 1 PTFE or FLEX GRAPH (FS) PTFE or FLEX GRAPH (FS)9 HANDLE 1 CARBON STEEL (1)STAINLESS STEEL (1)A276Type 430 10 HANDLE NUT 1 STAINLESS STEEL STAINLESS STEELA194Gr.8 16 WASHER 1 STAINLESS STEEL STAINLESS STEELA276Type 304 19 GASKET 1 PTFE or FLEX GRAPH (FS) PTFE or FLEX GRAPH (FS)30 BALL SEAT 2 HYPATITE PTFE HYPATITE PTFE47 THRUST WASHER 1 G/F PTFE G/F PTFEA LATCH LOCK 1 CARBON STEEL STAINLESS STEELA276Type 430NOTES:(1)PLASTIC COATEDCARBON STEELSTAINLESS STEEL MATERIALS OF CONSTRUCTION1/4” 0.37 1.99 2.42 3.94 3.94 2.09 1/4NPT 0.827 0.50 1.12 0.571 0.925 No.10-24UNC 0.44 3/8” 0.37 1.99 2.42 3.94 3.94 2.09 3/8NPT 0.945 0.50 1.12 0.571 0.925 No.10-24UNC 0.44 1/2” 0.39 2.29 2.46 4.53 3.94 2.44 1/2NPT 1.102 0.50 1.12 0.531 0.925 No.10-24UNC 0.66 3/4” 0.59 2.47 2.64 4.53 3.94 2.83 3/4NPT 1.378 0.87 1.37 0.551 1.004 No.10-24UNC 1.01 1” 0.79 2.50 2.70 5.31 3.94 3.35 1NPT 1.614 0.87 1.37 0.571 1.063 No.10-24UNC 1.94 1-1/4” 0.98 2.66 2.85 5.31 3.94 3.70 1-1/4NPT 2.047 0.93 1.50 0.531 1.024 1/4-20UNC 2.21 1-1/2” 1.26 3.27 3.66 6.14 5.12 4.21 1-1/2-NPT 2.323 0.93 1.50 0.669 1.240 1/4-20UNC 3.62 2” 1.57 3.58 3.98 7.48 5.12 4.72 2NPT 2.835 0.93 1.50 0.591 1.240 1/4-20UNC 5.64VALVE SIZE d HL HO DL DO L d2S1P1P2E F T APPROX WT.lbs.DIMENSIONS , InchesDLHL62-PIECE SEAL WELDEDAKSCTHWZM (-FS)/AKUTHWZM (-FS)DOHOHLDL1/4” 0.37 1.99 2.42 3.94 3.94 2.09 1/4NPT 0.827 0.50 1.12 0.571 0.925 No.10-24UNC 0.44 3/8” 0.37 1.99 2.42 3.94 3.94 2.09 3/8NPT 0.945 0.50 1.12 0.571 0.925 No.10-24UNC 0.44 1/2” 0.39 2.29 2.46 4.53 3.94 2.44 1/2NPT 1.102 0.50 1.12 0.531 0.925 No.10-24UNC 0.66 3/4” 0.59 2.47 2.64 4.53 3.94 2.83 3/4NPT 1.378 0.87 1.37 0.551 1.004 No.10-24UNC 1.01 1” 0.79 2.50 2.70 5.31 3.94 3.35 1NPT 1.614 0.87 1.37 0.571 1.063 No.10-24UNC 1.94 1-1/4” 0.98 2.66 2.85 5.31 3.94 3.70 1-1/4NPT 2.047 0.93 1.50 0.531 1.024 1/4-20UNC 2.21 1-1/2” 1.26 3.27 3.66 6.14 5.12 4.21 1-1/2-NPT 2.323 0.93 1.50 0.669 1.240 1/4-20UNC 3.62 2” 1.57 3.58 3.98 7.48 5.12 4.72 2NPT 2.835 0.93 1.50 0.591 1.240 1/4-20UNC 5.64VALVESIZE d HL HO DL DO L d2S1P1P2E F T APPROX WT.lbs.DIMENSIONS , Inches No PARTS Qty. MATERIALS MATERIALS ASTM SPECIFICATION1 BODY 1 CAST STEEL A216Gr.WCBSTAINLESS STEEL A351Gr.CF8M2 BODY CAP 1 CAST STEEL A216Gr.WCBSTAINLESS STEEL A351Gr.CF8M3 STEM 1 STAINLESS STEEL STAINLESS STEEL A276Type 3164 BALL 1 STAINLESS STEEL STAINLESS STEEL A276Type 3167 GLAND 1 STAINLESS STEEL STAINLESS STEELA276Type 304 8 GLAND PACKING 1 PTFE or FLEX GRAPH (FS) PTFE or FLEX GRAPH (FS)9 HANDLE 1 CARBON STEEL (1)STAINLESS STEEL (1)A276Type 430 10 HANDLE NUT 1 STAINLESS STEEL STAINLESS STEELA194Gr.8 16 WASHER 1 STAINLESS STEEL STAINLESS STEELA276Type 304 30 BALL SEAT 2 HYPATITE PTFE HYPATITE PTFE47 THRUST WASHER 1 G/F PTFE G/F PTFEA LATCH LOCK 1 CARBON STEEL STAINLESS STEELA276Type 430NOTES:(1)PLASTIC COATED CARBON STEELSTAINLESS STEEL MATERIALS OF CONSTRUCTION7Threaded (Pages 9 - 13)AKSC3THZM (CS/Regular Port/Non-Firesafe/Locking Lever)-#317AKU3THZM (SS/Regular Port/Non-Firesafe/Locking Lever)-#327AKSC3THZM-FS (CS/Regular Port/Firesafe/Locking Lever)-#319AKU3THZM-FS (SS/Regular Port/Firesafe/Locking Lever)-#329AKSC3THZM-O (CS/Regular Port/Non-Firesafe/Locking Oval)-#317-LOH AKU3THZM-O (SS/Regular Port/Non-Firesafe/Locking Oval)-#327-LOH AKSC3THZM-FSO (CS/Regular Port/Firesafe/Locking Oval)-#319-LOH AKU3THZM-FSO (SS/Regular Port/Firesafe/Locking Oval)-#329-LOH AKSC3TFZM (CS/Full Port/Non-Firesafe/Locking Lever)-#317F AKU3TFZM (SS/Full Port/Non-Firesafe/Locking Lever)-#327F AKSC3TFZM-FS (CS/Full Port/Firesafe/Locking Lever)-#319F AKU3TFZM-FS (SS/Full Port/Firesafe/Locking Lever)-#329F AKSC3TFZM-O (CS/Full Port/Non-Firesafe/Locking Oval)-#317F-LOH AKU3TFZM-O (SS/Full Port/Non-Firesafe/Locking Oval)-#327F-LOH AKSC3TFZM-FSO (CS/Full Port/Firesafe/Locking Oval)-#319F-LOH AKU3TFZM-FSO (SS/Full Port/Firesafe/Locking Oval)-#329F-LOH CODE NUMBERSSocket Weld (Pages 9 - 13)AWSC3THZM (CS/Regular Port/Non-Firesafe/Locking Lever)-#317S AWU3THZM (SS/Regular Port/Non-Firesafe/Locking Lever)-#327S AWSC3THZM-FS (CS/Regular Port/Firesafe/Locking Lever)-#319S AWU3THZM-FS (SS/Regular Port/Firesafe/Locking Lever)-#329S AWSC3THZM-O (CS/Regular Port/Non-Firesafe/Locking Oval)-#317S-LOH AWU3THZM-O (SS/Regular Port/Non-Firesafe/Locking Oval)-#327S-LOH AWSC3THZM-FSO (CS/Regular Port/Firesafe/Locking Oval)-#319S-LOH AWU3THZM-FSO (SS/Regular Port/Firesafe/Locking Oval)-#329S-LOH AWSC3TFZM (CS/Full Port/Non-Firesafe/Locking Lever)-#317FS AWU3TFZM (SS/Full Port/Non-Firesafe/Locking Lever)-#327FS AWSC3TFZM-FS (CS/Full Port/Firesafe/Locking Lever)-#319FS AWU3TFZM-FS (SS/Full Port/Firesafe/Locking Lever)-#329FS AWSC3TFZM-O (CS/Full Port/Non-Firesafe/Locking Oval)-#317FS-LOH AWU3TFZM-O (SS/Full Port/Non-Firesafe/Locking Oval)-#327FS-LOH AWSC3TFZM-FSO (CS/Full Port/Firesafe/Locking Oval)-#319FS-LOH AWU3TFZM-FSO (SS/Full Port/Firesafe/Locking Oval)-#329FS-LOHButtweld (Pages 9 - 13)BWSC3THZM (CS/Regular Port/Non-Firesafe/Locking Lever)-#317B BWU3THZM (SS/Regular Port/Non-Firesafe/Locking Lever)-#327B BWSC3THZM-FS (CS/Regular Port/Firesafe/Locking Lever)-#319B BWU3THZM-FS (SS/Regular Port/Firesafe/Locking Lever)-#329BBWSC3THZM-O (CS/Regular Port/Non-Firesafe/Locking Oval)-#317B-LOH BWU3THZM-O (SS/Regular Port/Non-Firesafe/Locking Oval)-#327B-LOH BWSC3THZM-FSO (CS/Regular Port/Firesafe/Locking Oval)-#319B-LOH BWU3THZM-FSO (SS/Regular Port/Firesafe/Locking Oval)-#329B-LOH BWSC3TFZM (CS/Full Port/Non-Firesafe/Locking Lever)-#317FB BWU3TFZM (SS/Full Port/Non-Firesafe/Locking Lever)-#327FB BWSC3TFZM-FS (CS/Full Port/Firesafe/Locking Lever)-#319FB BWU3TFZM-FS (SS/Full Port/Firesafe/Locking Lever)-#329FBBWSC3FZM-O (CS/Full Port/Non-Firesafe/Locking Oval)-#317FB-LOH BWU3TFZM-O (SS/Full Port/Non-Firesafe/Locking Oval)-#327FB-LOH BWSC3TFZM-FSO (CS/Full Port/Firesafe/Locking Oval)-#319FB-LOH BWU3TFZM-FSO (SS/Full Port/Firesafe/Locking Oval)-#329FB-LOH3-Piece8TECHNICAL INFORMATIONPRODUCT OVERVIEW*PRODUCT TYPE MATERIAL BASIC FIGURE STANDARD OPTIONS SIZE RANGETHREADED,REGULAR PORT SOCKET WELD,REGULAR PORT BUTTWELD,REGULAR PORT THREADED,FULL PORTSOCKET WELD,FULL PORTBUTTWELD,FULL PORT WCBCF8MWCBCF8MWCBCF8MAKSC3TKZM(-FS)AKU3TKZM(-FS)FIRESAFE(API607)LOCKING OVALLOCKING LEVER1/4”,3/8”,1/2”,3/4”,1”,1-1/4”,1-1/2”,2”WCBCF8MWCBCF8MWCBCF8MBWSC3TFZM(-FS)BWU3TFZM(-FS)AWSC3TFZM(-FS)AWU3TFZM(-FS)AKSC3TFZM(-FS)AKU3TFZM(-FS)BWSC3THZM(-FS)BWU3THZM(-FS)AWSC3THZM(-FS)AWU3THZM(-FS)1/2”,3/4”,1”,1-1/4”,1-1/2”,2”,2-1/2”*Contact KITZ for special configurations such as threaded x socket weldBASIC DESIGN Face-to Face Dimensions-KITZ StandardEnd Connections-N PT(ASME B1.20.1)Socket Weld(ASME B16.11)Buttweld(ASME B16.25)Wall Thickness-KITZ StandardPort-Regular and Full port in accordance with API608Mounting Pad- In accordance with ISO5211except1/2”regular port and1/4”~3/8”full portStandard Handle- Locking Oval(1/2”~1”)-Regular PortLocking Oval(1/4”~1”)-Full PortLocking Lever(1-1/4”~2-1/2”)-Regular PortLocking Lever(1-1/4”~2”)-Full PortOptional Locking Oval and Lever for other sizesBody Seat-Hypatite PTFEBody Seal-PTFE(Standard)/Flexible Graphite(FS)Pressure Rating- 1500WOG(1/2”~2”regular port and1/4”~1-1/2”full port)240WSP(1/2”~2”regular port and1/4”~1-1/2”full port)1000WOG(2-1/2”regular port and2”full port)186WSP(2-1/2”regular port and2”full port)NACE MR-01-75TEST PRESSURE Test Method-API598Body Test Pressure- 2250ps i,Hydrostatic(1/2”~2”regular port and1/4”~1-1/2”full port)1500psi,Hydrostatic(2-1/2”regular port and2”full port)Seat Test Pressure-80psi,Air9PRESSURE-TEMPERATURE RATINGOPERATING TORQUE, in-lbs*TECHNICAL DATA1/4”&3/8” 1/2” 40 43 45 48 51 53 58 59 61 65 1/2” 3/4” 62 66 71 75 80 84 89 93 97 104 3/4” 1” 89 98 108 118 128 137 147 157 166 179 1” 1-1/4” 124 149 174 198 223 248 273 297 322 355 1-1/4” 1-1/2” 195 216 237 259 280 301 322 343 365 392 1-1/2” 2” 221 255 289 322 356 389 423 457 490 534 2” 2-1/2” 310 354 434 513 593 673 752 832 912 1,015VALVE SIZE up to 145 290 435 580 725 870 1,015 1,160 1,305 1,500DIFFERENTIAL PRESSURE,psiVALVE APPROXSIZE Cv 1/4” 5 3/8” 7 1/2” 22 3/4” 43 1” 72 1-1/4” 126 1-1/2” 215 2” 346FLOW COEFFICIENTFBRBFULL PORT VALVE APPROXSIZE Cv REGULAR PORT *Values are for clean water at ambient temperature.KITZ recommends applying a safety factor when selecting an actuator.101/2” 5 3/4” 11 1” 24 1-1/4” 35 1-1/2” 74 2” 128 2-1/2” 2763-PIECEAKSC3THZM(-FS)/AKU3THZM(-FS)(Regular Port)AKSC3TFZM(-FS)/AKU3TFZM(-FS)(Full Port)1/2”Regular Port1/4”-3/8”Full Port11SOCKET WELD ENDSAWSC3THZM(-FS)/AWU3THZM(-FS)(Regular Port) AWSC3TFZM(-FS)/AWU3TFZM(-FS)(Full Port)BUTTWELD ENDSBWSC3THZM(-FS)/BWU3THZM(-FS)(Regular Port) BWSC3TFZM(-FS)/BWU3TFZM(-FS)(Full Port)1/2”Regular Port 1/4”-3/8”FullPort12NoPARTS Qty.MATERIALSMATERIALS ASTM SPECIFICATION 1 BODY 1CARBON STEEL A216Gr.WCB STAINLESS STEEL A351Gr.CF8M 2 CAP 2CARBON STEEL A216Gr.WCB STAINLESS STEEL A351Gr.CF3M 3 STEM 1 STAINLESS STEEL STAINLESS STEEL A276Type 316 4 BALL 1 STAINLESS STEEL STAINLESS STEEL A276Type 316orA351Gr.CF8M 7 GLAND 1 STAINLESS STEELSTAINLESS STEEL A276Type 3168A GLAND PACKING 1S PTFE or FLEX GRAPH (FS) PTFE or FLEX GRAPH (FS) 8B SPACER PACKING 1 G/F PFFE (FS ONLY)G/F PTFE (FS ONLY) 9 HANDLE 1 STAINLESS STEEL STAINLESS STEEL A276Type 430(1)10 HANDLE NUT 1 STAINLESS STEEL STAINLESS STEEL A194Gr.816A WASHER 1 STAINLESS STEEL STAINLESS STEEL 16B NAME PLATE 1 STAINLESS STEEL STAINLESS STEEL 19 GASKET 2 PTFE or FLEX GRAPH (FS) PTFE or FLEX GRAPH (FS)30 BALL SEAT 2 HYPATITE PTFE HYPATITE PTFE 34 GLAND NUT 1 STAINLESS STEEL STAINLESS STEEL A194Gr.8 35 CAP BOLT 8 STAINLESS STEEL STAINLESS STEEL A193Gr. B840 LOCK PLATE 1 STAINLESS STEEL STAINLESS STEEL 43 BELLEVILLE SPRING 2 STAINLESS STEEL STAINLESS STEEL 47 THRUST WASHER 1 C/F PTFE (2)C/F PTFE (2) 126 STOPPER PIN 1 STAINLESS STEEL STAINLESS STEEL A276Type 304A LATCH LOCK 1 STAINLESS STEEL STAINLESS STEELCARBON STEELSTAINLESS STEELMATERIALS OF CONSTRUCTIONNOTES: (1)PLASTIC COATED(2)ANTI-STATIC THRUST WASHER1/2” 0.39 1.87 2.484.72 3.49 2.48 1/2NPT 0.86 0.38 0.620 0.236 0.839 3/4” 0.55 2.33 3.075.12 5.12 2.80 3/4NPT 1.07 0.50 0.825 0.276 1.051 1” 0.75 2.64 3.43 5.12 5.12 3.54 1NPT 1.33 0.50 1.049 0.394 1.315 1-1/4” 0.94 3.23 3.31 5.91 7.09 4.06 1-1/4NPT 1.68 0.50 1.381 0.236 1.661 1-1/2” 1.18 2.46 3.54 5.91 7.09 4.33 1-1/2NPT 1.92 0.50 1.616 0.315 1.902 2” 1.50 4.06 3.93 7.09 7.09 5.00 2NPT 2.41 0.63 2.066 0.335 2.374 2-1/2” 1.97 5.986.66 9.06 9.84 5.98 2-1/2NPT 2.91 0.63 2.469 0.512 2.874 1/4” 0.39 1.87 2.48 4.72 3.94 2.48 1/4NPT 0.56 0.38 0.363 0.197 0.539 3/8” 0.39 1.87 2.48 4.72 3.49 2.48 3/8NPT 0.69 0.38 0.491 0.197 0.673 1/2” 0.55 2.33 3.07 5.12 5.12 2.80 1/2NPT 0.86 0.38 0.620 0.177 0.839 3/4” 0.75 2.64 3.43 5.12 5.12 3.54 3/4NPT 1.07 0.50 0.825 0.177 1.051 1” 0.94 3.23 3.31 5.917.09 4.06 1NPT 1.33 0.50 1.049 0.217 1.315 1-1/4” 1.18 2.46 3.54 5.91 7.09 4.33 1-1/4NPT 1.68 0.50 1.381 0.315 1.661 1-1/2” 1.50 4.06 3.93 7.09 7.09 5.00 1-1/2NPT 1.82 0.50 1.616 0.217 1.9022” 1.97 5.98 6.669.06 9.84 5.98 2NPT 2.41 0.63 2.027 0.335 2.374VALVE SIZEd HL HO DLDO L d2d1Pd1PDVALVE DIMENSIONS , InchesSOCKET WELDBUTT WELD (SCH 40)R E G U L A R P O R TF U L L P O R T1/2” 1.043 0.079 0.413 - - 1.969 M8 0.275 1/4-20UNC 0.197 - 3/4” 1.378 0.169 0.559 0.984 0.118 1.417 M10 0.197 1/4-20UNC 0.236 F03 1” 1.693 0.197 0.669 1.181 0.118 1.654 M12 0.315 1/4-20UNC 0.335 F04 1-1/4” 1.732 0.531 1.083 1.181 0.118 1.654 M14 0.315 1/4-20UNC 0.394 F04 1-1/2” 1.949 0.531 1.071 1.181 0.118 1.654 M14 0.315 1/4-20UNC 0.394 F04 2” 2.244 0.461 1.142 1.378 0.118 1.969 M16 0.394 1/4-20UNC 0.394 F05 2-1/2” 3.15 1.339 0.669 0.669 2.165 2.756 0.866 0.591 5/16-18UNC 0.669 F07 1/4” 1.043 0.079 0.413 - - 1.969 M8 0.275 1/4-20UNC 0.197 - 3/8” 1.043 0.079 0.413 - - 1.969 M8 0.275 1/4-20UNC 0.197 - 1/2” 1.378 0.169 0.559 9.984 0.118 1.417 M10 0.197 1/4-20UNC 0.236 F03 3/4” 1.693 0.197 0.669 1.181 0.118 1.654 M12 0.315 1/4-20UNC 0.335 F04 1” 1.732 0.531 1.083 1.181 0.118 1.654 M14 0.315 1/4-20UNC 0.394 F04 1-1/4” 1.949 0.351 1.071 1.181 0.118 1.654 M14 0.315 1/4-20UNC 0.394 F04 1-1/2” 2.244 0.461 1.142 1.378 0.118 1.969 M16 0.394 1/4-20UNC 0.394 F05 2” 3.15 1.119 0.669 0.669 2.165 2.756 0.866 0.591 5/16-18UNC 0.669 F07VALVE SIZEABCEFGKhJMISOFLANGEACTUATOR MOUNTING PAD DIMENSIONS , InchesR E G U L A R P O R TF U L L P O R T13OPTIONS and ACCESSORIESLOCKING LEVER HANDLESFIGURE VALVE MODELNUMBER SIZE NUMBER1/4” LL-10AKSCTKZM-FS 3/8” LL-11AKUTKZM-FS 1/2”&3/4” LL-121”&1-1/4” LL-131-1/2”&2” LL-14AKSCTHZM(FS) 1/4”&3/8” LL-15AKUTHZM(FS) 1/2”&34” LL-16and 1”&1-14” LL-17AKSCTWZM(FS) 1-1/2” LL-18AKUTHWZM(FS) 2” LL-19AKSC3THZM(FS) 1/2” LL-20AWSC3THZM(FS) 3/4”&1” LL-21BWS3THZM(FS)1-1/4”&1-1/2” LL-22AKU3THZM(FS) 2” LL-23AWU3THZM(FS) 2-1/2” LL-24BWU3THZM(FS)AKSC3TFZM(FS) 1/4”&3/8” LL-20AWSC3TFZM(FS) 1/2”&3/4” LL-21BWSC3TFZM(FS) 1”&1-1/4” LL-22AKU3TFZM(FS) 1-1/2” LL-23AWU3TFZM(FS) 2” LL-24LOCKING OVAL HANDLESFIGURE VALVE MODELNUMBER SIZE NUMBER1/4”OH-10LAKSCTKZM-FS 3/8”OH-11LAKUTKZM-FS 1/2”&3/4”OH-12L1”&1-1/4”OH-13L1-1/2”&2”OH-14LAKSCTHZM(FS) 1/4”&3/8”OH-15LAKUTHZM(FS) 1/2”&34”OH-16Land 1”&1-14”OH-17LAKSCTWZM(FS) 1-1/2”&2”OH-18LAKUTHWZM(FS)AKSC3THZM(FS) 1/2”OH-20LAWSC3THZM(FS) 3/4”&1”OH-21LBWS3THZM(FS)1-1/4”&1-1/2”OH-22LAKU3THZM(FS) 2”OH-23LAWU3THZM(FS) 2-1/2”OH-24LBWU3THZM(FS)AKSC3TFZM(FS) 1/4”&3/8”OH-20LAWSC3TFZM(FS) 1/2”&3/4”OH-21LBWSC3TFZM(FS) 1”&1-1/4”OH-22LAKU3TFZM(FS) 1-1/2”OH-23LAWU3TFZM(FS) 2”OH-24L14ADDITIONAL THREADED ITEMSFor more detailed information please consult KITZ product brochure BV-100-0701BRASS - AGA/CGA/UL/FM approval. 150 WSP/600 WOG. Full Port.Chrome plated ball and stem (316 SS ball and stem optional), PTFE seat and seals, blow-outproofstem, lever handle (locking lever and oval and locking oval handles optional).Figure Number: AKTAF (#68) - standard trim/AKTAFM (#68M) - stainless trimBRASS - UL approval. 150 WSP/600 WOG. Full Port.Chrome plated ball and stem, PTFE seats and seals, blow-out proof stem, KITZ standardactuatormounting pad, lever handle (locking lever and oval and locking oval handles optional).Figure Number: AKTAFP (#68P)BRASS - UL approval. 250 WSP/600 WOG. Full Port.316 SS ball and stem, R-PTFE 250# seats and seals, blow-out proof stem, KITZ standardactuatormounting pad, locking lever handle (oval and locking oval handles optional).Figure Number: AKTAFPM (#68PM)BRASS - SAFETY EXHAUST. 200 WOG. Full Port. 1/4” EXHAUST PORT (1” and 2”)Chrome plated ball and stem, PTFE seat and seals, blow-out proof stem, locking lever handle(oval and locking oval handles optional), integral exhaust tap on sizes 1” and 2”.Figure Number: AKTAFS (#68S)CARBON STEEL - 150 WSP/600 WOG. Reduced Port.316 SS ball and stem, R-PTFE seats and seals, blow-out proof stem, lever handleFigure Number: AKSCTK (#50)CARBON STEEL - 125 WSP/2000 WOG (1500WOG 1-1/4”-2”). Regular Port.316 SS ball and stem, PTFE seats and seals, blow-out proof stem, KITZ standard actuatormounting pad, locking lever handle (oval handle optional).Figure Number: AKSCTAHM (#49M)STAINLESS STEEL - 150 WSP/600 WOG. Reduced Port.316 SS body, ball and stem, R-PTFE seats and seals, blow-out proof stem, lever handle.Figure Number: AKUTKM (#52)STAINLESS STEEL - 125 WSP/800 WOG. Full Port.316 body, ball and stem, PTFE seats and seals, blow-out proof stem, KITZ standard actuatormounting pad, lever handle (oval handle optional).Figure Number: AKUTFM (#53F)STAINLESS STEEL - 125 WSP/2000 WOG (1500WOG 1-1/4”-2”). Regular Port.316 SS body, ball and stem, PTFE seats and seals, blow-out proof stem, KITZ standardactuator mounting pad, locking lever handle (oval handle optional).Figure Number: AKUTAHM (#39)STAINLESS STEEL - 125 WSP/1000 WOG. Three Piece. Regular Port.15NOTES16ISO 9001 certified since 1989KITZ CORPORATION OF AMERICA10750 Corporate Drive, Stafford, Texas 77477, U.S.A.Phone: 281-491-7333 Fax: 281-491-9402ITBV0050605。