炭黑各型号英文描述及简写 (1)
各种炭黑的名词解释(全)
各种炭黑的名词解释（全）炭黑收集collectionofcarbonblack将炭黑从炭黑烟气中分离出来进行再加工制成产品的过程。
炉法炭黑多采用旋风分离器串联袋滤器进行收集。
接触法炭黑是将火焰还原层中炭黑沉积于金属(如槽钢等)面上，而后被刮下通过螺旋输送器或气力输送而收集。
热裂法炭黑一般通过旋风分离器进行收集。
炭黑精制refinementofcarbonblack在炭黑生产过程中，粉状炭黑入造粒机之前，除去炭黑中的夹杂物如铁屑、焦粒等的过程。
可采用风选、磁选、筛选或微粒粉碎机等设备，将夹杂物除去或打磨成微粉，以保证产品质量。
炭黑输送conveyingofcarbonblack在炭黑生产过程中，将收集下来的粉状炭黑用气力(风送)或螺旋输送机输送到造粒机进行造粒，而造粒后的炭黑再用斗式提升机送入贮仓的过程。
炭黑运输shipmentofcarbonblack指炭黑由生产厂至用户间的运送。
国产橡胶用炭黑多采用袋装，然后用汽车或火车运送到用户。
散装运输是用铁路槽车或箱式自卸车将炭黑送至用户，适于湿法造粒炭黑运输。
散装运输成本低、污染小，宜于橡胶厂机械化、自动化生产，是炭黑运输的发展方向。
硬质炭黑hardcarbonblack橡胶用炭黑的一种习惯分类方法。
指在橡胶制品中以补强为主要作用的炭黑，系相对软质炭黑而言。
标准平均粒径在11～30nm范围，用接触法生产的炭黑及油炉法生产的大部分炭黑也为硬质炭黑。
软质炭黑softcarbonblack橡胶用炭黑的一种习惯分类方法。
指在橡胶制品中补强效果较差、在很大程度上起填充作用的炭黑，系相对硬质炭黑而言。
标准平均粒径在31～500nm范围，用气炉法和热裂法生产的炭黑及小部分油炉法生产的炭黑也属于软质炭黑。
超耐磨炭黑superabrasionfurnaceblack;SAF橡胶用炭黑品种中粒径为11～19nm。
用于橡胶制品中时，其耐磨性能优于其它品种炭黑。
主要由油炉法生产。
炭黑各型号英文描述及简写 (1)
1. N110OTHER NAME Super Abrasion Furnace Black; SAFPHYSICAL AND CHEMICAL PROPERTIES The particle size of carbon black N110 is the smallest among those of the rubber carbon blacks. Carbon black N110 has standard structure. Its iodine adsorption value is 145g/kg, and DBP adsorption is 113cm3/100g.APPLICATION Carbon black N110 is used in the treadcompound of truck tire and passenger tire. It isalso used in rubber articles with high strengthand high abrasion resistance such as highstrength conveyor belt and industrial rubberarticles etc.USAGE AND FUNCTION Carbon black N110 is has the smallest particlediameter, highest reinforcement and abrasionresistance. When mixing, it shall be welldispersed to avoid coking due to over-hightemperature. It can be used with anti-cokingagent or other carbon black if necessary.2. N115OTHER NAME Super Abrasion Furnace Black; SAFPHYSICAL AND CHEMICAL PROPERTIES Carbon black N115 has similar physical and chemical properties as carbon black N110. Its iodine adsorption value is 160g/kg, and DBP adsorption is 113cm3/100g.APPLICATION Carbon black N110 is used in the treadcompound of truck tire and passenger tire. It isalso used in rubber articles with high strengthand high abrasion resistance such as highstrength conveyor belt and industrial rubberarticles etc.USAGE AND FUNCTION Same as carbon black N110.3. N121OTHER NAME Super Abrasion Furnace Black-high Structure(New Technology); SAF-HS(New Technology)PHYSICAL AND CHEMICAL PROPERTIES Carbon black N121 is super abrasion furnace black-high structure, made in new technology. It has small particle size and high structure. Its iodine adsorption value is 121g/kg, and DBP adsorption is cm3/100g.APPLICATION Carbon black N121 is used in the tire treadcompound, especially high-speed car tire tread. USAGE AND FUNCTION Carbon black N121 has moderate reinforcementand similar dispersion as carbon black N220while its abrasion resistance is better than N220filled compound. In the carbon black N110 series,carbon black N121 has the best processingperformance.4. N220OTHER NAME Intermediate Super Abrasion Furnace Black;ISAFPHYSICAL AND CHEMICAL PROPERTIES Carbon black N220 with high re-enforcement property is a widely used furnace black. It has high structure, and its abrasion is between those of super abrasion furnace black and high abrasion furnace black. Its iodine adsorption value is 121g/kg, and DBP adsorption is 114cm3/100g.APPLICATION Carbon black N220 is used in tread compoundsof truck tire, passenger tire and high strengthhigh abrasion rubber products, such as highstrength conveyor belt and industrial rubberarticles etc.USAGE AND FUNCTION Carbon black N220 can be used in variousrubber compounds. Compared to the compoundsfilled with carbon black N330, those with N220has higher abrasion of 10%~20%, higher tensilestrength and higher crack resistance, higherheat-up and hardness. The compound filled withN220 is conductive.5. N234OTHER NAME Intermediate Super Abrasion Furnace Black-highstructure（New technology）；ISAF-HS（Newtechnology）PHYSICAL AND CHEMICAL PROPERTIES Carbon black N234, compared to other grades of N220 series, has higher structure, higher abrasion. Its iodine adsorption value is 120g/kg, and DBP adsorption is 125cm3/100g.APPLICATION Carbon black N234 is used in the treadcompounds of high speed tire and highperformance rubber products.USAGE AND FUNCTION The compound filled with N234 has betterabrasion than those with N220, N242 and N339.Its abrasion is about 10% higher than those ofcompounds with N220. Especially in the rigorousconditions, it shows very good abrasionperformance. The process performance of theN234 compounds is good too. The surface issmooth, suitable for various compounds. Thedeficiency of the N234 compounds is its highheat-up and high hysteresis loss.6. N326OTHER NAME High Abrasion Furnace Black-low Structure;HAF-LSPHYSICAL AND CHEMICAL PROPERTIES Carbon black N326 has iodine adsorption value 82g/kg, and DBP adsorption 72cm3/100g. TheN326 compound has high re-inforcement and low heat-up.APPLICATION Carbon black N326 is used in the treadcompounds with high strength and low heat-up. Itis also used in the conveyor belt, seals and otherhigh performance compounds.USAGE AND FUNCTION Carbon black N326 in the natural rubbercompounds has similar physical-mechanicalperformance as channel black while thevulcanization rate is kept same. The compoundfilled with N326 has high tensile strength, crackresistance and abrasion. Compared to thecompounds with other high abrasion furnaceblacks, the N326 compound has lower tensilestress, lower elongation and similar tensilestrength at break. The deficiency of the N326compounds is lower tensile strength, abrasionand fatigue resistance.7. N330OTHER NAME High Abrasion Furnace Black；HAFPHYSICAL AND CHEMICAL PROPERTIES Carbon black N330 is the most widely used high abrasion furnace black. Its iodine adsorption value is 82 g/kg, and DBP adsorption is102cm3/100g. The abrasion of the N330 compounds is lower than ISAF compounds but better than those of channel black-compounds.APPLICATION Carbon black N330 is used in the treadcompound, cord fabric compound, inner tire andindustrial compounds.USAGE AND FUNCTION Carbon black N330 has good re-inforcement,resulting in good tensile properties, crackresistance, abrasion and elasticity. Thehysteresis loss of the passenger tire filled withN330 is lower than the compounds with otherN300 series except N351. The N330 has gooddispersion and extrusion properties too, suitablefor various synthetic rubbers and natural rubbers.8. N339OTHER NAME High Abrasion Furnace Black-high Structure（New technology）；HAF-HS（Newtechnology）PHYSICAL AND CHEMICAL PROPERTIES Its iodine adsorption value is 90 g/kg, and DBP adsorption is 120cm3/100g. Compared to N330, N339 has higher structure, smaller particles. The N339 compound has better abrasion and crack resistance than those of high abrasion furnace black –high structure (old technology) such asN347.APPLICATION N339 is used in the tread compounds ofpassenger tire and truck tire, coating compoundsof conveyor belt, hose and industrial compoundswith high abrasion properties.USAGE AND FUNCTION The tread compound filled with N339 has similarre-inforcement, abrasion and crack resistanceproperties as those of N220 compounds, and hasgood extrusion property, very suitable for butylbenzene rubber/ butyl rubber compound. TheN339 compound has the highest rollingresistance among all the compounds with N330series.9. N375OTHER NAME High abrasion furnace black-high structure（New technology）；HAF-HS（Newtechnology）PHYSICAL AND CHEMICAL PROPERTIES Carbon black N375 is another grade of high abrasion furnace black with high structure (new technology). Its structure is a little lower than N339, and its properties are similar as N339. Its iodine adsorption value is 90 g/kg, and DBP adsorption is 114cm3/100g.APPLICATION The application of carbon black N375 is similaras N339, mainly used in the tread compounds ofpassenger tire, truck tire and cross-country tire. Itis also used in coating compounds of conveyorbelt.USAGE AND FUNCTION The usage and function of carbon black N375 issimilar as carbon black N339 although thestructure and heat-up is a little lower than N339.10. N539OTHER NAME Fast Extrusion Furnace Black –low Structure ;FEF-LSPHYSICAL AND CHEMICAL PROPERTIES Its iodine adsorption value is 43 g/kg, and DBP adsorption is 111cm3/100g.Carbon blackN539 is derived from carbon black N550. Its structure is lower than N550. Carbon black N539 with intermediate re-inforcement property is a general-purpose furnace black.APPLICATION Carbon black N539 is used in carcasscompound, especially suitable for buffering layercompound with natural rubber base. It is alsoused in the matrix compound of tire, coatingcompound of belt and other rubber products aswell as wire and cable compounds.USAGE AND FUNCTION The compound filled with N539 has smoothextrusion surface, small swelling rate,high tensile strength and high elongation.The N539 compound has lower tensile stressthan N550 compound. The N539 compound hasgood elasticity and fatigue resistanceproperties.11. N550OTHER NAME Fast Extrusion Furnace Black; FEFPHYSICAL AND CHEMICAL PROPERTIES Its iodine adsorption value is 43 g/kg, and DBP adsorption is 121cm3/100g. Carbon black N550 has smooth particle surface and high structure, resulting in best reinforcement properties among soft carbon blacks.APPLICATION Carbon black N550 is used in fabric cord,tire side compound, extrusion and rollingcompounds.USAGE AND FUNCTION Carbon black N550 is suitable for natural rubberand synthetic rubbers. N550 is easy to disperse,resulting in high enduring property, high extrusionrate, smooth surface, small expansion, hightemperature resistance and high heat-conductive, high re-inforcement, high elasticityand rebounding properties. Carbon black N550 ismainly used in fabric cord of tire, tire side,extrusion and rolling compounds. Carbon blackN550 is preferred to use with N660 when used inbutyl rubber compounds.12. N660OTHER NAME General Purpose Furnace Black ; GPFPHYSICAL AND CHEMICAL PROPERTIES Its iodine adsorption value is 36 g/kg, and DBP adsorption is 90cm3/100g.Carbon black N660 has high tensile stress, good processing performance, high rebounding performance and high flexibility. It is widely used in various fields.APPLICATION Carbon black N660 is used in fabric cord of tire,inner tire, bicycle tire, hose, belt, cable, shoes,extrusion compounds and rolling compounds. USAGE AND FUNCTION Carbon black N660 is suitable for variousvulcanizates. Compared to semi-reinforcementblacks, carbon black N660 has higher structure,smaller particle size, easy to disperse, highertensile stress and strain at break, lower heat-up,good elasticity and fatigue properties. Thedeficiency carbon black N660 is the lowelongation.13. NATURAL GAS SEMI-REINFORCING FURNACE CARBON BLACk OTHER NAME Semi-reinforcing Furnace; SRFPHYSICAL AND CHEMICAL PROPERTIES Natural gas semi-reinforcing furnace carbon black has the largest particle size and lowest structure among rubber carbon black. Its iodine adsorption value is 14 g/kg, and DBP adsorption is 47cm3/100g.APPLICATION Natural gas semi-reinforcing furnace carbonblack is suitable for natural rubber and syntheticrubbers, mainly used in compounds of bufferinglayer and tire cord, hose, belt, extrusion products,industrial rubber products, wire and cable etc. USAGE AND FUNCTION Natural gas semi-reinforcing furnace carbonblack can be used as filler with high load. Itscompound has high elongation, low heat-up, highelasticity and good aging-resistance.。
astm标准炭黑
astm标准炭黑
ASTM标准炭黑是一种用于橡胶和塑料工业的炭黑产品。
ASTM是美国材料和试验协会（American Society for Testing and Materials）的缩写，该组织负责制定各种材料和产品的测试标准。
ASTM标准炭黑主要用于制造轮胎、橡胶制品、电缆、密封件等。
它们具有良好的耐磨性、抗老化性和导电性，因此在许多应用中都非常受欢迎。
ASTM标准炭黑的主要类型包括：
1. N系列：N系列炭黑是最常用的炭黑类型，具有良好的耐磨性和抗老化性。
N系列炭黑的氮吸附比表面积（N2SA）范围从50到300平方米/克。
2. S系列：S系列炭黑具有较低的氮吸附比表面积（N2SA），通常在50平方米/克以下。
S系列炭黑主要用于制造低滚动阻力轮胎和高性能橡胶制品。
3. F系列：F系列炭黑具有较高的氮吸附比表面积（N2SA），通常在100平方米/克以上。
F系列炭黑主要用于制造导电橡胶和涂料。
4. H系列：H系列炭黑具有非常高的氮吸附比表面积（N2SA），通常在200平方米/克以上。
H系列炭黑主要用于制造高性能橡胶制品和导电涂料。
在选择ASTM标准炭黑时，需要考虑您的具体应用需求，如耐磨性、抗老化性、导电性等。
此外，还需要考虑炭黑的粒径分布、结构形态等因素，以确保获得最佳的性能。
橡胶用炭黑的分类及用途
橡胶用炭黑的分类及用途 It was last revised on January 2, 2021橡胶用炭黑的分类及用途：命名系统是把炭黑胶料的硫化速度和结构等因素考虑进去的，由4个系统构成。
第一个字母代表英文字母代表胶料的硫化速度。
N代表正常（normal）硫化速度，S代表缓慢（slow）硫化速度。
后面3个字母第一字母代表炭黑氮表面积范围。
第二个和第三个数字是反应不同的结构程度。
（这些都是由国家标准的）N220适用于各种橡胶，耐磨性比N330高10％-20％，能赋予胶粒胶高的拉伸强度和抗撕裂强度，并有一定的导电性。
主要用于载重胎、乘用胎的胎面胶，及需要高强度、高耐磨的橡胶制品N550适用于天然橡胶和各种合成橡胶，易分散，能赋予胶料较高的挺性，压出速度快，口型膨胀小，压出表面光滑。
硫化胶的高温性能及导热性能良好，补强性能、弹性和复原性亦较佳。
主要用于轮胎帘布胶、胎侧、内胎及压出、压延制品胶料中。
N660本品适用于各种橡胶，与半补强碳黑相比，具有较高的结构，粒子较细，在胶料中易分散，硫化胶的拉伸强度、抗撕裂强度和定伸应力较高，而变形小，生热低，弹性和耐屈扰性能良好。
主要用于胎轮帘胶布、内胎、自行车、胶管、胶带、电缆、鞋类及压延制品、模型制品等。
N774适用于各种橡胶，本品是除热裂法炭黑之外的粒径最大（产品粒径为80-170nm）、结构最低的炭黑品种，多用于轮胎胎体的缓冲层和帘布层胶料、胶管、压出制品、各种工业橡胶制品，以及电线、电缆等本品在胶料中可以大量填充，其硫化胶伸长率高、生热低、弹性高、耐老化性能良好。
本品亦可代替热裂法炭黑使用。
热裂解法炭黑：橡胶炭黑N990系列炭黑则采用天然气为原料，在隔绝空气的条件下无火焰燃烧，裂解生成，称热裂解法炭黑，碳黑N990其基本性能与炉法炭黑有较大区别。
碳黑N990优点主要表现在：一、粒子尺寸和分布，平均粒子尺寸为280nm,氮表面积7-11平方米/克，吸磺值为10克/公斤，CTAB法表面积为9平方米/克；二、粒子聚集度很小或说结构很低，显示为许多单独的球形炭黑粒子，基他部分由为数不多的熔接粒子组成，对比其它品种炭黑，整体聚集度很低。
炭黑的规格
炭黑的规格全文共四篇示例，供读者参考第一篇示例：炭黑是一种由热解炭化石油沥青或天然气所得的一种黑色固体颗粒状物质，主要成分为碳。
炭黑具有较高的比表面积和吸附性能，广泛应用于橡胶、塑料、油墨、油漆、化工、电子、材料科学等领域。
在不同的应用领域，炭黑的规格也各有不同，下面我们将介绍一下关于炭黑的规格。
1. 粒径分布炭黑的粒径分布是影响其性质和用途的重要参数之一。
通常来说，炭黑的粒径可分为primary particle size，aggregate size 和agglomerate size 三种。
其中primary particle size 是指炭黑颗粒的最小单元，通常在10-500 nm 之间；aggregate size 是指由primary particle 聚集而成的团聚体的大小，通常在0.1-1 μm 之间；agglomerate size 则是指由aggregate 聚集形成的颗粒的大小，通常在0.1-10 μm 之间。
不同粒径的炭黑可用于不同的领域，例如较小的primary particle size 的炭黑通常用于增强橡胶的性能，而较大的aggregate size 和agglomerate size 的炭黑则用于填料和颜料等方面。
2. 表面积炭黑的表面积通常用比表面积（specific surface area）来表示，单位通常为m2/g。
炭黑的表面积越大，其吸附性能和增强效果通常也越好。
一般来说，炭黑的比表面积可分为低比表面积（低于10m2/g）、中等比表面积（10-50 m2/g）、高比表面积（50-100 m2/g）和超高比表面积（大于100 m2/g）等几种。
不同的比表面积适用于不同的应用领域，例如低比表面积的炭黑通常用于填料和强度增强，而高比表面积的炭黑则用于吸附和催化等方面。
4. 分散性和堆积密度炭黑的分散性和堆积密度对其在生产和应用过程中的处理和性能也有着一定影响。
炭黑产品介绍
N220、234、326、330、339、375、539、550、660、754、774、762炭黑N220适用于各种橡胶，耐磨性比N330高10%-20%，能赋予胶粒胶高的拉伸强度和抗撕裂强度，并有一定的导电性。
主要用于载重胎、乘用胎的胎面胶，及需要高强度、高耐磨的橡胶制品。
N234耐磨性比N220约高10%，在高苛刻度下使用，更能显示出良好的耐磨性能。
主要用于高速轮胎面胶和高质量的橡胶制品N326在天然橡胶中具有较高的拉伸强度、抗撕裂强度、耐磨性及抗蹦裂性能。
主要用于要求强度高、生热低的轮胎(包括越野胎)胎面胶，也适用于输送带、密封制品及其他高质量橡胶工业制品。
N330是一种补强性能良好的炭黑，能赋予胶粒较好的强伸性能、抗撕裂性能、耐磨性和弹性。
主要用于轮胎胎面、帘布胶、胎侧及各种橡胶工业制品N339在胎面胶料中的补强性能、耐磨性能及抗裂口增长性能近于N220炭黑，特别适用于丁苯橡胶与顺丁胶并用体系。
主要用于乘用胎、卡车胎胎面胶，输送带、胶管及各种要求耐磨性高的橡胶工业制品。
N375与N339性能基本相同，生热比N339稍低。
主要用于轿车胎、载重胎及越野胎胎面胶。
N550适用于天然橡胶和各种合成橡胶，易分散，能赋予胶料较高的挺性，压出速度快，口型膨胀小，压出表面光滑。
硫化胶的高温性能及导热性能良好，补强性能、弹性和复原性亦较佳。
主要用于轮胎帘布胶、胎侧、内胎及压出、压延制品胶料中。
挤出N539使用于本品的胶料，其压出表面光滑，口型膨胀小。
硫化胶的拉伸强度和伸长率较高，定伸应力较N550低，弹性和耐疲劳性能均较好。
主要用于轮胎胎体胶料，尤其适用于以天然橡胶为主的缓冲层胶料，亦可用于轮胎基部胶料、胶带覆盖和其它橡胶制品及电线、电缆护套料中。
N660本品适用于各种橡胶，与半补强碳黑相比，具有较高的结构，粒子较细，在胶料中易分散，硫化胶的拉伸强度、抗撕裂强度和定伸应力较高，而变形小，生热低，弹性和耐屈扰性能良好。
国外炭黑信息
卡博特碳黑BALCK PEARLS 2000是卡博特公司开发的一种超高导电碳黑，碳黑BALCK PEARLS 2000可广泛用于需要高导电性的各个工业领域，卡博特BP2000具有超高导电性、易分散等特点。
塑料涂料均可添加量较小的时候就可以有很好的效果。
卡博特碳黑BALCK PEARLS 2000指标：德固赛(欧励隆)超导电碳黑XE2-B主要特性：超导电、抗静电、高黑度德固赛(欧励隆)超导电碳黑XE2-B基本介绍：品牌：德固赛(欧励隆)型号：碳黑XE2-B规格：珠状5公斤/包德固赛(欧励隆)超导电碳黑XE2-B功能及用途：德固赛(欧励隆)导电碳黑XE2-B用于导电和抗静电的塑料盒弹性体的导电炭黑，如低密度聚乙烯LDPE、高密度聚乙烯HDPE、聚丙烯PP、乙烯共聚物EC、聚苯乙烯PS、聚酰胺PA、不饱和聚酯PET、软质PVC、硬质PVC等塑料工业。
一般添加量在5%-7%就可以达到导电的效果。
Printex XE2-B导电碳黑也用于所有类型的黑色涂料、油墨的调色、导电涂料和塑料导电性优良。
德固赛(欧励隆)超导电碳黑XE2-B参数指标：日本科琴黑Ketjenblack®EC-600JD导电碳黑主要特性：高纯度、高性能、添加量少、高纯度的超级导电碳黑日本科琴黑Ketjenblack®EC-600JD导电碳黑基本介绍：品牌：科琴黑黑型号：Ketjenblack®EC-600JD规格：8公斤/包产地：日本日本科琴黑Ketjenblack®EC-600JD导电碳黑功能及用途：日本科琴黑Ketjenblack® EC-600JD（Ketjenblack即科琴黑黑®碳黑）是一种高纯度、高性能的超级导电碳黑，是目前导电碳黑中导电率最高的一个品种。
Ketjenblack® EC-600JD具有独特的支链状形态，容易形成高效导电网络1/3到1/6就可达到很高的导电性。
Evonik_Degussa特种炭黑介绍（可编辑）
Evonik_Degussa特种炭黑介绍Evonik DegussaSpeciality CarbonBlacksfor MRG Industry德固赛用于橡胶制品的特殊碳黑J. C. Nian & Dr. W. Wolff粘志成先生 & 伍福博士Applied Technology Rubber Reinforcement橡胶补强应用技术| Evonik Degussa Speciality Carbon Black for MRG Industry Page | 2 Content 内容Introduction介绍Purex? grades and Durex?0 for extrusion applications应用于挤出制品的 Purex?碳黑和 Durex?0Carbon blacks for molding applications应用于模制成型的碳黑Handling properties操作性能Summary总结| Evonik Degussa Speciality Carbon Black for MRG Industry Page | 3 MRG Industry Mechanical Rubber Goods Industry 工业用橡胶制品Printing Rolls印刷滚筒 Windshield wipers雨刷Profiles挤出制品Hoses软管Molded goods模制物品Introduction - The MRG Industry简介 -橡胶制品工业| Evonik Degussa Speciality Carbon Black for MRG Industry Page | 4 Different application fields different technical requirements不同的应用领域不同的技术需求Large number of recipes大量的配方large number of rubber grades mechanical resistance, oil resistance, heat ageing...多样的橡胶等级机械抗力、耐油、热老化…等。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
1. N110OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION2. N115OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION3. N121OTHER NAMESuper Abrasion Furnace Black; SAFThe particle size of carbon black N110 is the smallest among those of the rubber carbonblacks. Carbon black N110 has standardstructure. Its iodine adsorption value is 145g/kg,and DBP adsorption is 113cm3/100g.Carbon black N110 is used in the treadstrength conveyor belt and industrial rubberarticles etc.Carbon black N110 is has the smallest particle diameter, highest reinforcement and abrasion resistance. When mixing, it shall be welldispersed to avoid coking due to over-hightemperature. It can be used with anti-cokingagent or other carbon black if necessary.Super Abrasion Furnace Black; SAFCarbon black N115 has similar physical andchemical properties as carbon black N110. Itsiodine adsorption value is 160g/kg, and DBPadsorption is 113cm3/100g.Carbon black N110 is used in the treadstrength conveyor belt and industrial rubberarticles etc.Same as carbon black N110.Super Abrasion Furnace Black-high Structure (New Technology); SAF-HS(New Technology)PHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION4. N220OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION5. N234OTHER NAMECarbon black N121 is super abrasion furnace black-high structure, made in new technology. It has small particle size and high structure. Its iodine adsorption value is 121g/kg, and DBP adsorption is cm3/100g.Carbon black N121 is used in the tire treadperformance.Intermediate Super Abrasion Furnace Black;ISAFCarbon black N220with high re-enforcement property is a widely used furnace black.It has high structure, and its abrasion is between those of super abrasion furnace black and high abrasion furnace black.Its iodine adsorption value is121g/kg,and DBP adsorption is 114cm3/100g.Intermediate Super Abrasion Furnace Black-high structure（New technology）；ISAF-HS（New technology）PHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION6. N326OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONabrasion. Its iodine adsorption value is 120g/kg,and DBP adsorption is 125cm3 /100g.Carbon black N234 is used in the treadperformance rubber products.High Abrasion Furnace Black-low Structure;HAF-LSCarbon black N326 has iodine adsorption value 82g/kg, and DBP adsorption72cm3Carbon black N326 is used in the treadCarbon black N326 in the natural rubberperformance as channel black while the7. N330OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION8. N339OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTIONHigh Abrasion Furnace Black；HAFCarbon black N330 is the most widely used high abrasion furnace black. Its iodine adsorptionvalue is 82 g/kg, and DBP adsorption is102cm3/100g. The abrasion of the N330Carbon black N330 has good re-inforcement,resulting in good tensile properties, crackresistance, abrasion and elasticity. The（New technology）；HAF-HS（Newtechnology）Its iodine adsorption value is 90 g/kg, and DBP adsorption is 120cm3OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION10. N539OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESHigh abrasion furnace black-high structure （New technology）；HAF-HS （New technology）Carbon black N375is another grade of high abrasion furnace black with high structure (newtechnology).Its structure is a little lower than N339, and its properties are similar as N339. Its iodine adsorption value is 90g/kg,and DBP adsorption is114cm3/100g.The usage and function of carbon black N375 is similar as carbon blackN339although the structure and heat-up is a little lower than N339.Fast Extrusion Furnace Black –low Structure ;FEF-LSIts iodine adsorption value is 43 g/kg, and DBP adsorption is111cm3/100g.Carbon blackN539 is derived from carbon black N550. Its structure is lower than N550. Carbon black N539 with intermediate re-inforcementproperty is a general-purpose furnaceblack.Carbon black N539 is used in carcassUSAGE AND FUNCTION11. N550OTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESAPPLICATIONUSAGE AND FUNCTION12. N660OTHER NAMEPHYSICAL ANDproperties.Fast Extrusion Furnace Black; FEFIts iodine adsorption value is 43 g/kg, and DBP adsorption is 121cm3/100g. Carbon black N550has smooth particle surface and highstructure,resulting in best reinforcement properties among soft carbon blacks.Carbon black N550 is suitable for natural rubber and synthetic rubbers. N550 is easy to disperse,resulting in high enduring property, high extrusion rate, smooth surface, small expansion, hightemperature resistance and high heat-conductive, high re-inforcement, high elasticity and rebounding properties. Carbon black N550 is mainly used in fabric cord of tire, tire side,General Purpose Furnace Black ; GPFIts iodine adsorption value is 36 g/kg, and DBP adsorption is 90cm3/100g.Carbon black N660 has high tensile stress, good processing performance, high reboundingperformance and high flexibility. It is widely used in various fields.APPLICATIONCarbon black N660 is suitable for variousvulcanizates. Compared to semi-reinforcement blacks, carbon black N660 has higher structure,smaller particle size, easy to disperse, higher tensile stress and strain at break, lower heat-up,good elasticity and fatigue properties. Thedeficiency carbon black N660 is the lowelongation.13. NATURAL GAS SEMI-REINFORCING FURNACE CARBON BLACkOTHER NAMEPHYSICAL ANDCHEMICAL PROPERTIESSemi-reinforcing Furnace; SRFNatural gas semi-reinforcing furnace carbonblack has the largest particle size and lowest structure among rubber carbon black. Its iodine adsorption value is 14 g/kg, and DBP adsorption is47cm/100g.3APPLICATIONNatural gas semi-reinforcing furnace carbonNatural gas semi-reinforcing furnace carbonblack can be used as filler with high load. Its。