27寸屏规格书
27寸上4k显示器规格书
27寸上4k显示器规格书摘要：一、前言二、产品特点1.27 寸大屏幕2.4k 超高清分辨率3.丰富的接口选项4.人性化的设计三、产品规格1.屏幕尺寸2.分辨率3.刷新率4.响应时间5.亮度6.色彩支持四、接口配置1.HDMI 接口2.DisplayPort 接口B 接口五、适用场景六、售后服务正文：【前言】随着科技的不断发展，人们对于显示器的需求也越来越高。
为了满足广大用户的需求，我们推出了这款27 寸4k 显示器，旨在为用户带来更好的视觉体验。
【产品特点】1.27 寸大屏幕：这款显示器拥有27 寸的大屏幕，可以提供更加宽广的视野，让您在工作或娱乐时都能享受到舒适的视觉体验。
2.4k 超高清分辨率：这款显示器的分辨率高达4k，可以提供更加细腻、清晰的画质，让您沉浸在视觉的盛宴中。
3.丰富的接口选项：这款显示器配备了多种接口，包括HDMI、DisplayPort 和USB 接口，可以满足您多种设备的连接需求。
4.人性化的设计：这款显示器采用人性化的设计，底座可调节，让您可以根据自己的需要调整显示器的角度，提高使用舒适度。
【产品规格】1.屏幕尺寸：27 寸2.分辨率：4k（3840x2160）3.刷新率：60Hz4.响应时间：1ms5.亮度：350cd/m6.色彩支持：100%sRGB【接口配置】1.HDMI 接口：支持HDMI2.0，可以连接电脑、游戏机、播放器等多种设备。
2.DisplayPort 接口：支持DisplayPort 1.2，提供更高的传输速度和更好的画质。
B 接口：提供USB 3.0 接口，方便连接U 盘、移动硬盘等设备。
【适用场景】这款显示器适用于多种场景，包括办公、设计、游戏、影视等，可以满足不同用户的需求。
27寸屏规格书
WLED
灯管数量(Lamp Number)
18S4P pcs
灯管形状(Lamp Shape)
4串
背光寿命(Life Time of Lamp)
30K Hours
单一灯管电压(Voltage of Lamp)
59.4V
单一灯管电流(Current of Lamp)
120mA
背光接口数量(Quantity of Backlight Interface)
1 pcs
背光接口脚距(Pitch of Backlight Interface)
1.0 mm mm
背光接口定义(Backlight Interface Define )
BLE-6PINS-CCAACC
每箱数量(Quantity Per Box)
5.0V
面板输入电流(Input Current)
0.8A
信号接口类型(Kind of Singnal Interface)
端子
信号接口品牌(Brand of Singnal Interface)
E&T
信号接口型号(Model of Singnal Interface)
FI-XPB30SRLA-HF11
内置灯管驱动器(Driver of Backlight)
无
背光接口类型(Kind of Backlight Interface)
端子
背光接口品牌(Brand of Backlight Interface)
E&T
背光接口型号(Model of Backlight Interface)
3707K-Q06N-01R
制造商(Productor)
HP Z27i 27寸IPS显示器说明书
Get outstanding image accuracy, exceptional adjustability, and mission -critical reliability optimized for commercial environments. Built with IPS Gen 2 panels, the HP Z27i27-inch IPS Display delivers power savings over first -generation IPS technology and extra -wide viewing angles that foster collaboration.Say hello to your new power -smart IPS Gen 2 team player Lower your power consumption 1and get 99% coverage of sRGB color space from IPS Gen 2 panels. Speed teamreviews and collaborative decision -making with extra -wide viewing angles that give everyone the same great view. See all the stunning details on a 27-inch diagonal display with narrow bezels and an ultra -high resolution of 2560 x 1440 that provides 3.7M pixels of ultimate visual power. Experience crisp, clear presentation from 350 cd/m 2brightness, 1000:1 contrast ratio, 5M:1 dynamic contrast ratio, and 8 ms response time.2Enhance the dark regions of your onscreen images and see the smallest details even better with integrated HP Black Stretch technology. Designed -in comfortFind your most comfortable position with a 4-wayadjustable stand and an integrated HP QR2 Quick Release that enables VESA mounting. Get connectedEnjoy future -ready and legacy connectivity from a range of inputs that include DisplayPort 1.2, DVI, VGA, HDMI 1.4, audio output for an HP Speaker Bar,3 and four USB 3.0 ports with speeds up to 10x faster than USB 2.0.Keep it togetherGet organized with the integrated cable management clip. Create a clean, compact all -in -one with the optional HP Thin Client Mount Kit 3. The HP QR2 Quick Release is integrated into the display to enable quick set up, and it’s VESA mountable.Control your environmental impactReduce power consumption and help lower your costs with an intelligent, energy-efficient design that goes beyond IPS Gen 2 technology with ENERGY STAR® and EPEAT® Gold qualifications.4The HP Z27i 27-inch IPS Display also includes mercury -free display backlights, a low halogen design,5 and arsenic -free display glass.Meet your monitor’s new best friendCustomize your workspace with resizable screen partitions. Work in documents, spreadsheets, and email in separate regions of the screen—at the same time—with HP Display Assistant software.View open applications on all of your connected displays with the expanded toolbar. Help deter theft with a user -designated PIN that deactivates the monitor if it’s disconnected from a PC without approval. Breathe easyRest assured that your IT investment is supported by a standard, three-year limited warranty. Select optional HP Care Pack Services 6 to extend your protection up to 5 years.Work smarter and rely on a professional display designed for brilliant image accuracy, exceptional comfort and energy savings.HP Z27i 27-inch IPS Display(L) Shown with HP Z820 Desktop Tower Workstation (sold separately).(R) Shown with HP Thin Client Mount Kit and HP t510 Thin Client (each sold separately).Part number D7P92A4, D7P92A8, D7P92AS, D7P92ATPanel type IPS Gen 2, LED BacklitViewable image area 68,58 cm (27 in) widescreen; diagonally measuredViewing angle Horizontal: 178 degrees; Vertical: 178 degreesBrightness2350 cd/m2Contrast ratio2Static: 1000:1; Dynamic: 5,000,000:1Response rate28ms gray to grayFrequency Horizontal: 24 - 94 KHz Vertical: 50 - 76 HzAspect ratio 16:9Native resolution 2560 x 1440 @ 60 HzResolutions supported 640 x 480 @ 60Hz, 720 x 400 @ 70 Hz, 800 x 600 @ 60 Hz, 1024 x 768 @ 60 Hz, 1280 x 720 @ 60 Hz, 1280 x 800 @ 60 Hz, 1280 x 1024 @ 60 Hz, 1366 x 768 @ 60 Hz, 1440 x 900 @ 60 Hz, 1600 x 900 @ 60 Hz, 1600 x 1200 @ 60 Hz, 1680 x1050 @ 60 Hz, 1920 x 1080 @ 60 Hz, 1920 x 1200 @ 60 Hz, 2560 x 1440 @ 60 HzInput signal DisplayPort 1.2 (1.1 compatible), DVI-D, HDMI 1.4, VGA (HDCP support on DVI-D, DisplayPort and HDMI)USB Integrated USB 3.0 hub with (1) Upstream and (4) Downstream portsUser controls Menu, Minus ("-"), Plus ("+") /Input Control, OK/Auto, PowerPower consumption ENERGY STAR®: 38.62 W; Default: 60 W; Maximum: 75 W; Sleep/Off Mode Power: > 0.5WDimensions (w x d x h)Unpacked: 64,1 x 24,24 x 42,04 cm (25.24 x 9.55 x 15.55 in) Head only: 64,1 x 6,55 x 37,92 cm (25.24 x 2.58 x 14.93 in)Weight Unpacked: 7,6 kg (16.74 lbs); Head only: 5,3 kg (11.68 lbs); Packaged: 9,8 kg (21.6 lbs) Base features Tilt: -5°to +20°; Swivel: 45°L to 45°R; Height Adjustable: 120 mm; Pivot Rotation: 90° Environmental Operating: 5° to 35° C (41° to 95° F); Non-operating: -20° to 60° C (-4° to 140° F)Accessories8 (sold separately)HP Thin Client Mount Kit -Attach your HP Thin Client or USDT PC to the back of select HP Z Displays and maintain optimal ergonomic adjustability with the HP Thin Client Mount Kit. Simply mount an HP Thin Client to the Kit’s VESA plate, slide it into place on the back of an HP Z24i, Z27i or Z30i IPS Display stand, and you’re ready to go. Part number E5J35AA.HP LCD Speaker Bar - Powered directly by the connected PC, seamlessly attaches to the monitor's bezel to bring full multimedia support to select HP LCD monitors; features dual speakers with full sound range and two external jacks for headphones. Part number NQ576AA.HP Dual Output USB Graphics Adapter - Create a dual-monitor setup with the HP Dual Output USB Graphics Adapter – featuring both DVI-I and DisplayPort inputs to drive displays at high resolutions through a single USB 3.0 connection to your PC. Part numberC5U89AA.HP Business PC Security Lock Kit - Attaches to the rear of the PC with a six-foot steel cable that can be used to secure a PC or peripherals such as mice, keyboards, monitors or USB security devices to protect them against unauthorized removal by physically connecting the system to an anchor point. Part number PV606AA.Certification and compliance CE, CB , CEL Grade 1, KC, KCC, NOM, PSB, ICE, TUV-S, CCC, CECP, SEPA, TCO 6.0 Certification, EPA, ISC, VCCI, FCC, HSMI, Microsoft WHQL Certification (Windows 8 and Windows 7), ENERGY STAR® Qualified, EPEAT® Gold4.Limited warranty Protected by HP, including a 3 year standard limited warranty. Optional HP Care Pack Services6 are extended service contracts that extend your protection beyond the standard warranties.61. Comparison is to IPS Gen 1 panels.2. All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.3. Options sold separately. Thin client sold separately. Thin client kit expected availability September 2013.4. EPEAT® Gold registered models of this product are available where HP registers commercial display products. See for registration status in your country.5. External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be Low Halogen.6. Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from date of hardware purchase. Restrictions and limitationsapply. See /go/cpc for details.7. All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower.8. Each accessory and mounting hardware is sold separately.9. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting surfaces vary widely and the finalmounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with aqualified engineering, architectural or construction professional to determine the appropriate type and quantity of mounting fasteners required for your applicationand to ensure that your mounting solution is properly installed to support applied loads.HP Z27i 27-inch IPS Display© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The onlywarranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothingherein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions containedherein. ENERGY STAR is a registered mark owned by the U.S. government. October 2013。
维真显示27寸裸眼3D显示器规格书
电子特性
扫描频率 反转扫描 功率总耗 屏幕刷新率 接口 扬声器 60Hz No 33.1W (Typ.) 60Hz DVI 外置
3
Model Name: VS2708 Preliminary Specifications
产品特点
1.显示立体内容：立体显示屏显示三维立体影象，还原真实世界。 2.裸眼：无需借助任何辅助设备即可观看三维立体影像效果。 3.多视点：水平观看角度达到 140 度。 4.高亮度：与当前世界 3D 显示器各厂商产品相比，有更高的亮度，对环 境光线没有任何要求条件,适合各个场所的立体展示。 5.高清晰：专门算法能有效去除摩尔纹，双眼没有障碍地接受视频图像， 如身临其境。 6.大纵深：视觉纵深能达到±1.5 米。 7.应用范围广：适用于所有用户形象展示的场所，效果震撼。 8.支持片源格式：九宫格。
596.736 （H）×335.664（V） 612.5 612.5 10kg （H）×356.2 （H）×356.2 （V）×8.8 （V）×12.8
光栅参数
光栅尺寸 光栅倾斜方向 光栅安装方式 光栅透光度 光栅精度 604.5 （H）×348.2 （V）×4 （D） mm
左上到右下 □右上到左下 向内 ＞92% ±0.2μm 向外 □
1
基本信息
面板型号 面板类型 工作温度 存储温度 寿命 光栅种类 封装方式 3D 最佳观看距离 3D 可视角度 视点数 HR270QH1-100 a-Si TFT-LCD 0～50℃ -20～60℃ ＞3000性
面板尺寸 分辨率 像素间距 显示区域 面板外观尺寸 3D 模组尺寸 重量 27 inch 2560(RGB)×1440 (Quad-HD) 0.2331 （H）×0.2331 （V） mm mm （D） （D） mm mm
戴尔 Dell EV2736W 27英寸 IPS LCD 显示器说明书
With an impressive 27-inch diagonal and a resolution of 2560 x 1440 pixels, the EV2736W offers all the space that’s needed for efficient on-screen work. No matter if it’s text, graphics, photos or videos: This is the perfect screen for anyone who likes to view their content detailed and crystal-clear. Anti-glare and IPS LCD technology facilitate ergonomic working methods, ideal for users who wish to maintain a clear view from all angles at all times. A backlighting system based on economical yet bright LED technology further enhances the viewing experience. This big screen requires just 24 watts in regular use. Thanks to the built-in EcoView functions, power consumption is throttled whenever the screen is not in use or when the brightness can be reduced.♦ IPS LCD module with 2560 x 1440 pixels in a compact, space-saving design ♦ Contrast 1000:1, brightness 300 cd/m², 178° viewing angle ♦ 6 ms grey-grey changeover time thanks to overdrive function ♦ Auto EcoView, EcoView Index and EcoView Sensefor maximum power savings and superb ergonomics ♦ Integrated loudspeakers ♦ DisplayPort and DVI-D inputsEIZO EV2736W27” widescreen LCD monitor with 16:9 aspect ratioCompact, space-saving designThe sophisticated LCD module has a very narrow border and is designed for an extremely compact housing. The border around the image is no more than 20.5 mm. Power supply and signal interfaces are unobtrusively integrated into the unit.Outstanding image qualityA resolution of 2560 x 1440 pixels, a contrast ratio of 1000:1 and brightness of 300 cd/m² all ensure first-class image quality with clear graphics and structures as well as sharp text contours. No matter if you’re sitting directly in front of the display or at an angle, the entire screen complete with all corners always has superb colour and greyscale contrast.Economical and environmentally-friendlyThe mercury-free backlight with efficient but bright, white LEDs is a particularly impressive feature of the EV2736W. It requires just 24 watts in regular use. This reduces energy costs as well as CO2 emissions.Auto EcoViewThe EcoView sensor measures the light in the environment and automatically adjusts the display brightness accordingly. Theimage brightness is stronger in the case of bright illumination and it is reduced in the dark. It is also possible to control thebrightness manually. The user can freely determine minimum and maximum image brightness. The EcoView index indicates how environmentally-friendly each setting is. Auto EcoView is activated simply by pressing a button.EcoView SenseWhen it comes to power savings, the EV2736W excels thanks its EcoView Sense function. It switches the display on or off entirely automatically depending on whether the user is present or not in front of the screen. EcoView Sense detects the user’s return even before the keyboard or mouse are touched. This means the display is always ready for operation, yet it does not waste any power while the user is away.Eco Timer EIZO uses two methods to save energy: After a predefined time, Eco Timer automatically switches the monitor into standby mode, reducing power consumption. The powerswitch, located directly on the monitor, switches the power supply off completely and therefore minimises unnecessary CO² emissions as well as costs.OverdriveThe precalculated Overdrive function accelerates pixel conversion to a level where the changeover time between different hue values is a mere 6 ms on average. Moving images in fast video sequences, games and 3D CAD animations are displayed at a stunning speed and without any annoying delays.High-precision colour controlColour temperature control allows the white balance to be adjusted at intervals of 500 between 4,000 and 10,000 K. In addition, the colour saturation (gain) for RGB colours can be configured separately.EIZO EV2736W FeaturesFineContrastThis function offers a wide range of display modes with various default settings for brightness, colourtemperature and gamma. It offers ideal views for office applications, Internet and images (sRGB) at the push of a button. ‘Paper’ mode simulates the pleasing contrast and white balance of printed documents. In addition, two user modes are also available for separate settings.Digital and analogue inputsOne DisplayPort and one DVI-D input enable theconnection of a wide variety of digital signals. A D-Sub input is available for analogue signals. Up to three computers can be connected at the same time.USB hubAn integrated USB hub is provided for the connection of peripheral devices. For example, a keyboard and mouse can be connected to the monitor right on the desk. ScreenManager Pro for DDCScreenManager Pro is used for convenient monitor control using software via the Windows interfaceas an alternative to the on-screen display. The signal cable is all that is required for connection. It is even possible to link monitor settings to specific applications, for example, switching to sRGB display properties when opening the browser.Audio-enabledLoudspeakers and headphone jack are discreetly integrated into the housing.FlexStandThis enables turning and tilting as well as operation in portrait and landscape format. The continuous height adjustment starts very low near the desk and has a range of 15 centimetres. This guarantees optimal ergonomics, regardless ofwhether the user is sitting or standing in front of the screen. The FlexStand base is always fully stable, despite its maximum range of movement.Test marksDiagonal68 cm (27 inches) 16:9 aspect ratio Models (housing colour) EV2736WFS-GY (light grey) EV2736WFS-BK (black)Visible image size 597 mm (width) x 336 mm (height) Visible diagonal685 mmIdeal and recommended resolution 2560 pixels x 1440 lines Dot pitch0.233 mm x 0.233 mm Displayed colours 16.7 millionMax. brightness300 cd/m² (typical) Max. dark room contrast 1000:1 (typical)Max. viewing angle Horizontal: 178°; vertical: 178° LCD technologyIPS Typical mid-tone reaction time6 msFeaturesEcoView Sense, Auto EcoView, EcoView Index, Overdrive, HDCP decoder, FineContrast, On-Screen Display,PowerManager by VESA DPMS, Plug & Play via VESA DDC CI, USB hub, integrated loudspeakers and power supplyConfiguration optionsBrightness, contrast, gamma, colour saturation for RGB, colour temperature, clock, phase, image position, resolution, Eco Timer, OSD language (DE, UK, FR, SE, ES, IT), interpolationResolutionsMax. 2560 x 1440 full image 1:1, 1920 x 1200, 1600 x 1200, 1680 x 1050,1280 x 1024, 1024 x 768, 800 x 600, 720 x 400, 640 x 480, enlarged to full image or 1:1Horizontal frequency Digital: 31–89 kHz Vertical frequency Digital: 59–61 Hz Video bandwidth Digital: 242 MHzGraphic signals DisplayPort, DVI (TMDS), Signal inputs DisplayPort and DVI-D Plug & PlayVESA DDC CIPower management VESA DPMS, DVI-DMPMPower consumptionmax.* 67 watts, typically 24 watts, less than 0.5 watts in standby mode, 0 watts when power switch is OFF Dimensions (WxHxD) 64 cm x (40–54 cm) x 25 cm Weight 10 kgTest marksCE, TÜV GS, TÜV certified ergonomics, ISO 9241-307 Class 1, TCO 6 Energy Star Speakers Left and rightAudio input 3.5 mm stereo jack Audio output 3.5 mm stereo jack (for headphones)Flexibility172° right/left, 30° to the back,90° rotatable, 14 cm height adjustment USB hubOne upstream/two downstream, rev. 2.0 Accessories includedManual in German, English and French, power-, USB- and signal cables (DP-DP and DVI-D-DVI-D), ICC colour profileService Five-year on-site replacement serviceErrors excepted 09/12EIZO EV2736W Specifications* at maximum brightness, USB hub as well as all signal inputs and speakers in operation。
飞利浦E系列27英寸全高清液晶显示器272E2FE产品说明书
飞利浦全高清液晶显示器E 系列27 英寸（68.6 厘米）1920 x 1080（全高清）272E2FE体验真实色彩和不受约束的视觉效果全新飞利浦 E 系列显示器采用 4 面窄边框和线缆收纳设计，为您的工作空间平添时尚感。
体验清晰的全高清视觉效果、1 毫秒快速响应时间和 AMDFreeSync™ 技术，实现流畅的游戏操作。
出众的画质•四侧无边框显示屏•IPS LED宽视角技术，确保图像和颜色精确度•SmartContrast：可展现极其丰富的暗部细节畅玩游戏的优质之选•采用 AMD FreeSync™ 技术，轻松顺畅地玩游戏•1 毫秒 MPRT 快速响应，展现清晰图像，让您畅玩游戏•专为游戏玩家而优化的 SmartImage 游戏模式专门为您设计的功能•借助无闪烁技术减少眼部疲劳•LowBlue 模式，高效保护视力•线缆管理改善了因线缆过多而导致的零乱情况，还您一片整洁的工作空间•EasySelect 菜单切换键，快速访问屏幕菜单•倾角和高度调整让您获得理想的观看方位产品亮点四侧无边框这款几乎无边框的显示屏采用 4 面窄边框设计，外观简约，为您提供广阔的观赏体验。
提高您的工作效率，让您专注于具有无缝视觉效果的生动图像。
即使在枢轴模式下设置多个显示器，也可在不受任何干扰的情况下为您呈现宽广视角。
IPS技术IPS 显示屏采用可带给您 178/178 度超宽视角的先进技术，几乎可在任何角度观看显示屏。
与标准 TN 面板不同，IPS 显示屏可带给您色彩艳丽、极为清晰的图像，不仅适合观看照片、电影和网页浏览，而且适合要求始终确保颜色精确度和恒定亮度的专业应用领域。
超流畅的游戏体验玩游戏时绝对不希望出现游戏设置卡滞或画面不连续的情况。
此全新飞利浦显示器确保不会出现这些问题。
采用 AMDFreeSync™ 技术，它几乎可以任意帧速率提供流畅、无伪影性能，获得流畅的快速刷新和超快响应时间。
1 毫秒 MPRT 快速响应MPRT （动态画面响应时间）是一种更直观的描述响应时间的方式，它直接指从看到模糊噪声到清晰通透图像的持续时间。
philips 276e7qdsb 27英寸 4k显示器 用户手册说明书
/welcome246E7276E7ZH 用户手册 1 客户服务与保修 17 故障排除和常见问题解答21目录1. 重要 (1)1.1 安全措施与维修 (1)1.2 标志说明 (2)1.3 产品和包装材料的废弃 (3)2. 设置显示器 (4)2.1 安装 (4)2.2 操作显示器 (6)2.3 卸下底座支撑臂 (8)2.4 MHL（Mobile High-De nitionLink，移动高清链接）简介 (9)3. 图像优化 (10)3.1 SmartImage Lite (10)3.2 SmartContrast (11)4. 技术规格 (12)4.1 分辨率和预设模式 (15)5. 电源管理 (16)6. 客户服务与保修 (17)6.1 Philips 平板显示器像素缺陷规定 ..176.2 客户服务与保修 (20)7. 故障排除和常见问题解答 (21)7.1 故障检修 (21)7.2 一般常见问题解答 (22)7.3 MHL 常见问题解答 (24)1. 重要此电子版用户指南适合使用Philips显示器的所有用户。
请在使用您的显示器之前花点时间阅读本用户手册。
它包含与使用显示器相关的重要信息和注意事项。
产品享受Philips保修须符合下列条件：产品适当用于其设计目的、符合操作说明、返修时提供原始帐单或付款收据，帐单或收据应载明购货日期、销售商名称、产品型号及生产号。
1.1 安全措施与维修警告使用本文档中未介绍的控制、调整或过程可能导致碰撞、电气危险和/或机械危险。
连接和使用电脑显示器时，请阅读并遵循以下说明。
操作• 请使显示器远离阳光直接照射、明亮强光线、以及任何其他热源。
长期暴露于此类环境可能导致显示器褪色和损坏。
• 移开任何可能掉入通风孔的物品或者会妨碍显示器电子器件正常冷却的物品。
• 请勿堵塞机壳上的通风孔。
• 放置显示器时，确保电源插头和插座便于插拔。
• 如果通过拔掉电源线或直流电源线关闭显示器电源，则在重新连接电源线或直流电源线以进行正常操作之前，必须等待6秒钟。
27寸屏WF2Q的规格书
CC 이기형 ( Monitor R&D 기획그룹 / 선임연구원 )손경조 ( HE 규격2그룹 / 선임연구원 )최찬용 ( Monitor 양산그룹 / 대리 )송성호 ( Monitor 회로개발그룹 / 선임연구원 )김경진 ( LCD TV 부품품질보증계 / 기사 )이상훈 ( Monitor 회로개발그룹 / 책임연구원 )김철회 ( LGEND R&D.MNT MECHANIC GROUP / 선임연구원 )허희준 ( Monitor R&D 기획그룹 / 선임연구원 )류동우 ( Monitor Module 구매그룹 / 과장 )이송화 ( Monitor Module 구매그룹 / 대리 )김영주 ( Monitor R&D 기획그룹 / 연구원 )이지수 ( Monitor Module 구매그룹 / 사원 )이연정 ( Monitor 회로개발그룹 / 연구원 )윤석재 ( Monitor 양산그룹 / 과장 )이상기 ( Monitor 기구개발그룹 / 선임연구원 )정성준 ( Monitor Module 구매그룹 / 사원 )이종수 ( Monitor 양산그룹 / 대리 )엄정훈 ( Monitor 양산그룹 / 과장 )남유조 ( Monitor Module 구매그룹 / 사원 )박경열 ( Monitor 양산그룹 / 과장 )이동규 ( Monitor Module 구매그룹 / 사원 )이재민 ( Monitor 회로개발그룹 / 수석연구원 )황동선 ( LGEND R&D.MNT S/W GROUP / 수석연구원 )김종태 ( Monitor 회로개발그룹 / 수석연구원 ) 김주만 ( Monitor NCP 회로그룹 / 수석연구원 )박일준 ( LGEIN R&D DISPLAY MECH GROUP / 수석연구원 )이명규 ( HE 규격2그룹 / 수석연구원 )배권일 ( Monitor 양산그룹 / 부장 )차상호 ( HE 규격2그룹 / 책임연구원 )윤성욱 ( HE 규격2그룹 / 책임연구원 )김명욱 ( Monitor 회로개발그룹 / 수석연구원 )박강식 ( LCD TV 부품품질보증계 / 기정 )이규호 ( LCD TV 부품품질보증계 / 기정 )박철진 ( LCD TV 부품품질보증계 / 기정 )SARWO SOVIANDY SIJABAT ( LGEIN R&D DISPLAY LCD MNT PART / sr. supervisor )pinquan zhou ( LGEND R&D.MNT MASS PRODUCTION GROUP / senior manager B )xiaodong li ( LGEND R&PONENT DEVELOPMENT GROUP / manager a )qiu Yu ( LGEND R&D.Power GROUP / manager b )xiaoyong zhang ( LGEND R&D.MNT DEVELOPMENT GROUP / manager a )jian dong ( SQA GROUP / Operator3 )ke zhu ( LGEND R&D.MNT MECHANIC GROUP / assist manager )wenxue li ( LGEND R&D.MNT PLANNING GROUP / assist manager )guozhe zheng ( LGEND PRODUCTION.Mechanical Supply Gr / manager b )jie sun ( LGEND R&D.MNT MASS PRODUCTION GROUP / officer 2 )li zhao ( LGEND R&D.MNT MASS PRODUCTION GROUP / officer 3 )hui kang ( LGEND R&PONENT DEVELOPMENT GROUP / assist manager )su yuan ( LGEND R&D.MNT PLANNING GROUP / officer 1 )yong qing ( LGEND R&D.MNT PLANNING GROUP / assist manager )fei sun ( LGEND PRODUCTION.MATERIAL GROUP / Operator2 )EDMS Doc LinkAttached Local FilesCAS_LM270WF2-TLA5.pdfIIS_LM270WF2-TLA5.pdfCAS_LM270WF2-TLA6.pdf IIS_LM270WF2-TLA6.pdfSafety.zipTest report.zipKPL ＆ MCS.zip LM270WF2-TLA5 3D Drawing.zipProduct Specification 1/ 31Liquid Crystal Display Ver 1.0Dec. 13. 2010SPECIFICATIONFORAPPROVAL( ) Preliminary Specification(●) Final Specification27”Full HD TFT LCD TitleMODEL BUYERLM270WF2*MODELTLA5SUFFIX LG Display Co., Ltd.SUPPLIER *When you obtain standard approval,please use the above model name without suffixLG Electronics Please return 1 copy for your confirmation with your signature and comments.///SIGNATURE DATE APPROVED BYJ.H PARK / G.ManagerMNT Products Engineering Dept.LG Display Co., Ltd.APPROVED BY SIGNATURE DATE REVIEWED BYPREPARED BYJ.H. SONG / Manager [C]H.C. JUNG / EngineerD.H. Kang / Manager [P]S.Y. AN / Manager [M]Liquid Crystal DisplayContents 28ENVIRONMENT 7-319VLCD POWER DIP CONDITION 3-7179INTERFACE CONNECTIONS 3-2COLOR INPUT DATA REFERNECE 3-529DESIGNATION OF LOT MARK 8-129PACKING FORM 8-229PACKING 830PRECAUTIONS 928EMC 7-21COVER2CONTENTS3RECORD OF REVISIONS4GENERAL DESCRIPTION 15ABSOLUTE MAXIMUM RATINGS 26ELECTRICAL SPECIFICATIONS 36ELECTRICAL CHARACTREISTICS 3-115SIGNAL TIMING SPECIFICATIONS 3-316SIGNAL TIMING WAVEFORMS 3-418POWER SEQUENCE 3-620OPTICAL SFECIFICATIONS 424MECHANICAL CHARACTERISTICS 527RELIABLITY 628INTERNATIONAL STANDARDS 728SAFETY 7-1Page ITEM NoLiquid Crystal DisplayRECORD OF REVISIONS Update words of the safety and environment28Update the calculation formula of LED power consumption 8Modify the color coordinates of By and add I BL spec 20Update the Mechanical drawing 25, 26Update the LED String Voltage (Min/Max) and power consumption 8Modify the weight information of LCD Module 4, 24Dec. 13. 20101.0First Draft(Preliminary)-Sep. 7. 20100.0Description Page Revision Date RevisionNoLiquid Crystal Display1. General DescriptionFigure 1. Block diagramLM270WF2-TLA5 is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode (White LED) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. It has a 27 inch diagonally measured active display area with Full HD resolution (1080 vertical by 1920 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color isdetermined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than 16,7M colors with Advanced-FRC(Frame Rate Control). It has been designed to apply the interface method that enables low power, high speed, low EMI. FPD Link or compatible must be used as a LVDS(Low Voltage Differential Signaling) chip. It is intended to support applications where thin thickness, wide viewing angle, low power are critical factors and graphic displays are important. It is intended to support displays where high brightness, super wide viewing angle,high color saturation, and high color are important.Liquid Crystal Display2. Absolute Maximum RatingsThe following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.Note : 1. Temperature and relative humidity range are shown in the figure below.Wet bulb temperature should be 39 °C Max, and no condensation of water.2. Storage condition is guaranteed under packing condition.Table 1. ABSOLUTE MAXIMUM RATINGS90%10203040506070800-2001020304050Dry Bulb Temperature [C]Wet Bulb Temperature [C]Storage Operation H u m i d i t y [(%)R H ]10%40%60%60Figure 2. Temperature and relative humidityLiquid Crystal Display3. Electrical Specifications3-1. Electrical CharacteristicsTable 2-1. ELECTRICAL CHARACTERISTICSNote :1. Permissive power ripple should be measured under V LCD =5.0V, 25°C, fV(frame frequency)=60Hzcondition and At that time, we recommend the bandwidth configuration of oscilloscope is to be under 20Mhz. See the next page.2. The specified current and power consumption are under the V LCD =5.0V, 25 ±2°C,f V =60Hz conditionwhereas Mosaic pattern(8 X 6) is displayed and fv is frame frequency.3. The specified current and power consumption are under the V LCD =5.0V, 25 ±2°C,fV=60Hz condition whereas Full Black pattern is displayed and fv is frame frequency.4. Maximum Condition of Inrush current :The duration of rush current is about 2ms and rising time of Input Voltage is 1ms(min.).At any rising time of Input voltage, Keep the I2T Value by below ConditionCondition : I2T < 32*2msIt requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input power for the LED/Backlight, is typically generated by a LED Driver.The LED Driver is an external unit to the LCDs.Liquid Crystal DisplayWhite pattern Black pattern•Permissive Power input ripple (V LCD =5.0V, 25°C, fV(frame frequency)=60Hz condition )•Power consumption (V LCD =5.0V, 25°C, fV (frame frequency=60Hz condition )Figure 3. Mosaic pattern & Black Pattern for power consumption measurementTypical power PatternBlack PatternLiquid Crystal DisplayTable 2_2. LED Bar ELECTRICAL CHARACTERISTICS 4,6,7Watt 23.9422.5321.12P BarPower Consumption 5,7Hrs --30,000LED_LT LED Life Time3,7V 54.451.248.0VsLED String Voltage 1,7LED :2,7mA 120110-Is LED String CurrentNotes Max.Typ.Min.Unit ValuesCondition Symbol ParameterLED driver design guide:The design of the LED driver must have specifications for the LED in LCD Assembly .The performance of the LED in LCM, for example life time or brightness, is extremely influenced bythe characteristics of the LED driver.So all the parameters of a LED driver should be carefully designed and output current should beConstant current control.Please control feedback current of each string individually to compensate the current variationamong the strings of LEDs.When you design or order the LED driver, please make sure unwanted lighting caused bythe mismatch of the LED and the LED driver (no lighting, flicker, etc) never occurs.When you confirm it, the LCD module should be operated in the same condition as installed inyour instrument.Notes :1. Specified values are for a single LED bar.2. The specified current is input LED chip 100% duty current.3. The specified voltage is input LED string and Bar voltage at typical 110mA 100% duty current.4. The specified power consumption is input LED bar power consumption at typical 110mA 100% duty current.5. The life is determined as the time at which luminance of the LED is 50% compared to that of initial value at the typical LED current on condition of continuous operating at 25 ±2°C.6. The LED bar power consumption shown above does not include loss of external driver.The used LED bar current is the LED typical current.Min Power Consumption is calculated with PBar = Vs(Min.) x Is(Typ.) x NstringMax Power Consumption is calculated with PBar = Vbar(Max.) x Is(Typ) x Nstring7.LED operating DC Forward Current must not exceed LED Max Ratings at 25 ±2°C.Liquid Crystal Display3-2. Interface ConnectionsTable 3 MODULE CONNECTOR(CN1) PIN CONFIGURATIONThis LCD employs Two interface connections, a 30 pin connector is used for the module electronics and a 10Pin Connector is used for the integral backlight system.3-2-1. LCD ModuleNote: 1. All GND(ground) pins should be connected together and to Vss which should also be connected tothe LCD’s metal frame.2. All VLCD (power input) pins should be connected together.3. Input Level of LVDS signal is based on the EIA 664 Standard.4. PWM is a reference signal for inverter control. This PWM signal is synchronized with vertical frequency. Its frequency is 3 times of vertical frequency, and its duty ratio is 50%.If the system don’t use this pin, do not connect.V LCDV LCD V LCD PWM NC NC GND SR3P SR3MSCLKINPSCLKINM SR2P SR2M GND SR1P Symbol302928272625242322212019181716NoPower Supply +5.0VPower Supply +5.0V Power Supply +5.0V Reference signal for LED Driver control No ConnectionNo Connection Ground Plus signal of even channel 3 (LVDS)Minus signal of even channel 3 (LVDS)Plus signal of even clock channel (LVDS)Minus signal of even clock channel (LVDS)Plus signal of even channel 2 (LVDS)Minus signal of even channel 2 (LVDS)GroundPlus signal of even channel 1 (LVDS)SymbolMinus signal of even channel 1 (LVDS)GroundPlus signal of even channel 0 (LVDS)Minus signal of even channel 0 (LVDS)Plus signal of odd channel 3 (LVDS)Minus signal of odd channel 3 (LVDS)Plus signal of odd clock channel (LVDS)Minus signal of odd clock channel (LVDS)GroundPlus signal of odd channel 2 (LVDS)Minus signal of odd channel 2 (LVDS)Plus signal of odd channel 1 (LVDS)Minus signal of odd channel 1 (LVDS)Plus signal of odd channel 0 (LVDS)Minus signal of odd channel 0 (LVDS)DescriptionSR1M15GND 14SR0P 13SR0M 12FR3P 11FR3M 10FCLKINP 9FCLKINM 8GND7FR2P 6FR2M 5FR1P 4FR1M 3FR0P 2FR0M 1SymbolNo -LCD Connector(CN1): GT103-30S-HF15-E2500 (Manufactured by LSC ) or Equivalent -Mating Connector : FI-X30H and FI-X30HL (Manufactured by JAE) or Equivalent [ Figure 4 ] Connector diagramLiquid Crystal DisplayTable 4. REQUIRED SIGNAL ASSIGNMENT FOR Flat Link (TI:SN75LVDS83) Transmitter Notes : Refer to LVDS Transmitter Data Sheet for detail descriptions.Pin #Require SignalPin NamePin #Require SignalPin Name1Power Supply for TTL Input V CC 29Ground pin for TTL GND 2TTL Input (R7)D530TTL Input (DE)D263TTL Input (R5)D631TTL Level clock Input T X CLKIN 4TTL Input (G0)D732Power Down Input PWR DWN 5Ground pin for TTL GND 33Ground pin for PLL PLL GND 6TTL Input (G1)D834Power Supply for PLL PLL V CC 7TTL Input (G2)D935Ground pin for PLL PLL GND 8TTL Input (G6)D1036Ground pin for LVDSLVDS GND 9Power Supply for TTL Input V CC 37Positive LVDS differential data output 3TxOUT3＋10TTL Input (G7)D1138Negative LVDS differential data output 3TxOUT3－11TTL Input (G3)D1239Positive LVDS differential clock output T X CLKOUT ＋12TTL Input (G4)D1340Negative LVDS differential clock output T X CLKOUT －13Ground pin for TTL GND 41Positive LVDS differential data output 2T X OUT2＋14TTL Input (G5)D1442Negative LVDS differential data output 2T X OUT2－15TTL Input (B0)D1543Ground pin for LVDS LVDS GND 16TTL Input (B6)D1644Power Supply for LVDSLVDS V CC 17Power Supply for TTL Input V CC 45Positive LVDS differential data output 1T X OUT1＋46Negative LVDS differential data output 1T X OUT1－18TTL Input (B7)D1747Positive LVDS differential data output 0T X OUT0＋48Negative LVDS differential data output 0T X OUT0－19TTL Input (B1)D1820TTL Input (B2)D1949Ground pin for LVDS LVDS GND21Ground pin for TTL Input GND 22TTL Input (B3)D2023TTL Input (B4)D2150TTL Input (R6)D2751TTL Input (R0)D024TTL Input (B5)D2225TTL Input (RSVD)D2352TTL Input (R1)D153Ground pin for TTL GND 26Power Supply for TTL Input V CC 54TTL Input (R2)D255TTL Input (R3)D327TTL Input (HSYNC)D2456TTL Input (R4)D428TTL Input (VSYNC)D25Liquid Crystal DisplayLVDS Input characteristicsV V LVDS Common mode Voltage 600|V ID LVDS Differential Voltage Max Symbol Description1. DC Specification2. AC SpecificationLiquid Crystal DisplayVer 1.0Dec. 13. 2010< Clock skew margin between channel >< LVDS Data Format >3. Data Format 1) LVDS 2 Port< Spread Spectrum >Freq.Liquid Crystal Display2) LVDS 1 PortLiquid Crystal Display3-2-2. LED InterfaceThe LED interface connector is a model 10019HR-H06B manufactured by Yeonho.The pin configuration for the connector is shown in the table below.Table 5. LED connector pin configurationFIG. 5 Backlight connector viewLiquid Crystal Display3-3. Signal Timing SpecificationsThis is signal timing required at the input of the TMDS transmitter. All of the interface signal timing should be satisfied with the following specifications for it’s proper operation.Table 6. TIMING TABLE Note: Hsync period and Hsync width-active should be even number times of t CLK . If the value is odd numbertimes of t CLK , display control signal can be asynchronous.In order to operate this LCM a Hsync, Vsyn, and DE(data enable) signals should be used.1. The performance of the electro-optical characteristics may be influenced by variance of the verticalrefresh rates.2. Vsync and Hsync should be keep the above specification.3. Hsync Period, Hsync Width, and Horizontal Back Porch should be any times of of characternumber(8).4. The polarity of Hsync, Vsync is not restricted.16012858tHB Horizontal Blank960960960tHV Horizontal Valid 802010tVB Vertical Blank108010801080tVV Vertical Valid tHP1642tWV WidthHz756050fV Frequency tHP116011001090tVP Period 644820tHBP Horizontal Back Porch 484820tHFP Horizontal Front Porch tCLK483218tWH WidthKHz3285tVBP Vertical Back Porch 3283tVFPVertical Front Porch82.56664.3fH Frequency tCLK112010881018tHP PeriodHsyncVsyncMHz87.571.860.0-Frequency ns 15.3813.9311.42tCLKPeriodDCLKNoteUnit Max Typ Min SymbolITEMLiquid Crystal Display3-4. Signal Timing WaveformsLiquid Crystal Display3-5. Color Data ReferenceTable 7. COLOR DATA REFERENCEThe Brightness of each primary color(red,green,blue) is based on the 8-bit gray scale data input for the color;the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.0 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 0 0 0GREEN (000) Dark GREEN0 0 0 0 0 0 0 00 0 0 0 0 0 0 10 0 0 0 0 0 0 0GREEN (001)............0 0 0 0 0 0 0 01 1 1 1 1 1 1 00 0 0 0 0 0 0 0GREEN (254)0 0 0 0 0 0 0 01 1 1 1 1 1 1 10 0 0 0 0 0 0 0GREEN (255)0 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 0 0 0RED (000) Dark RED 0 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 0 0 1RED (001)............0 0 0 0 0 0 0 00 0 0 0 0 0 0 01 1 1 1 1 1 1 0RED (254)0 0 0 0 0 0 0 00 0 0 0 0 0 0 01 1 1 1 1 1 1 1RED (255)0 0 0 0 0 0 0 10 0 0 0 0 0 0 00 0 0 0 0 0 0 0BLUE (001)............1 1 1 1 1 1 1 00 0 0 0 0 0 0 00 0 0 0 0 0 0 0BLUE (254)1 1 1 1 1 1 1 10 0 0 0 0 0 0 00 0 0 0 0 0 0 0BLUE (255)BLUE (000) Dark WhiteYellow Magenta Cyan Blue (255)Green (255)Red (255)Black 0 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 0 0 0Basic Color0 0 0 0 0 0 0 00 0 0 0 0 0 0 01 1 1 1 1 1 1 10 0 0 0 0 0 0 01 1 1 1 1 1 1 10 0 0 0 0 0 0 01 1 1 1 1 1 1 10 0 0 0 0 0 0 00 0 0 0 0 0 0 01 1 1 1 1 1 1 11 1 1 1 1 1 1 10 0 0 0 0 0 0 01 1 1 1 1 1 1 10 0 0 0 0 0 0 01 1 1 1 1 1 1 10 0 0 0 0 0 0 01 1 1 1 1 1 1 11 1 1 1 1 1 1 11 1 1 1 1 1 1 11 1 1 1 1 1 1 11 1 1 1 1 1 1 1BLUEMSB LSBGREEN MSB LSB RED MSB LSB B7 B6 B5 B4 B3 B2 B1 B0G7 G6 G5 G4 G3 G2 G1 G0R7 R6 R5 R4 R3 R2 R1 R00 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0 0 0 0 0BLUE ColorInput Color DataLiquid Crystal Display3-6. Power SequenceNotes : 1. Please avoid floating state of interface signal at invalid period.2. When the interface signal is invalid, be sure to pull down the power supply for LCD V LCD to 0V.3. B/L power must be turn on after power supply for LCD and interface signal are valid.ms -1000T7ms 50-0.01T2ms ms --500T3--200T4ms 50-0.01T5ms 10-0.5T1Max Typ MinUnitsValuesParameterTable 8. POWER SEQUENCEPower supply for LCDVccInterface signalV IPower Supply for LEDLiquid Crystal Display3-7. VLCD Power Dip condition1) Dip condition3.5V ≤V LCD ＜4.5V , t d ≤20ms2) V LCD ＜3.5VV LCD -dip conditions should also follow the Power On/Off conditions for supply voltage.Liquid Crystal DisplayOptical characteristics are determined after the unit has been ‘ON’for approximately 30 minutes in a dark environment at 25±2°C. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of Φand θequal to 0 °and aperture 1 degree.FIG. 6 presents additional information concerning the measurement equipment and method.FIG. 6 Optical Characteristic Measurement Equipment and Method4. Optical Specifications50cmOptical Stage(x,y)LCD ModulePritchard 880 or equivalentLiquid Crystal DisplayNotes 1.Contrast Ratio(CR)is defined mathematically as :Surface Luminance with all white pixelsContrast Ratio =Surface Luminance with all black pixels2. Surface luminance is luminance value at No.1 point across the LCD surface 50cm from the surface with all pixels displaying white. For more information see FIG 6.3. The variation in surface luminance , δWHITE is defined as :Measuring point for surface luminance & measuring point for luminance variation(%)100)L .... ,L ,(L Maximum )L .. ,L ,Minimum(L on9on2on1on9on2on1×…=WHITE δVActive AreaA : H/4 mmB : V/4 mm@ H,V : Active Area[ FIGURE 7 ] Measure Point for LuminanceBy PR880By PR880Liquid Crystal Display4. The response time is defined as the following figure and shall be measured by switching the input signal for “black”and “white”.Response time is the time required for the display to transition from white to black (Rise Time,T rR) and from black to white (Decay Time, T rD ).10090100%Optical responseTr R Tr D[ FIGURE 8] Response TimeLiquid Crystal Display7. Viewing angle is the angle at which the contrast ratio is greater than 10 or 5. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG. 9 .<Dimension of viewing angle range>[ FIGURE 9 ] Viewing angleTable 10. Gray Scale Specification8, Gray scale specificationGamma Value is approximately 2.2. For more information see Table 100.10010076.0054.5537.3023.4512.254.831.10255223191159127956331Relative Luminance [%] (Typ.)Gray LevelLiquid Crystal Display5. Mechanical CharacteristicsThe contents provide general mechanical characteristics. In addition the figures in the next page are detailed mechanical drawing of the LCD.Notes : Please refer to a mechanic drawing in terms of tolerance at the next page.336.31mm VerticalHard coating(3H)Anti-glare treatment of the front polarizerSurface TreatmentTyp : 2930g, Max : 3066gWeight 340.4mm Vertical 368.2mm Vertical 14.5mm Depth 597.89mm HorizontalActive Display Area602mmHorizontalBezel Area630mm HorizontalOutline DimensionLiquid Crystal Display<FRONT VIEW>Liquid Crystal Display<REAR VIEW>Liquid Crystal Display6. ReliabilityEnvironment test conditionMax 70%RH , Ta=40℃Maximum Storage Humidity for 4 corner light leakage Mura.90 -40,000 feet(12192m)Altitudestorage / shipment8Ta= 40 °C ,90%RHHumidity condition Operation7Shock level : 100GWaveform : half sine wave, 2ms Direction :±X, ±Y, ±ZOne time each direction Shock test(non-operating)6Wave form : random Vibration level : 1.0Grms Bandwidth : 10-300Hz Duration : X,Y,Z, 10minOne time each direction Vibration test(non-operating)5Ta= 0°C 240hLow temperature operation test4Ta= 50°C 50%RH 240h High temperature operation test 3Ta= -20°C 240hLow temperature storage test 2Ta= 60°C 240h High temperature storage test 1ConditionTest ItemNoLiquid Crystal Display7. International Standards 7-2. EMC7-3. Environment7-1. Safetyc) EN 60950-1:2006 + A11:2009, European Committee for Electrotechnical Standardization(CENELEC).Information Technology Equipment -Safety -Part 1 : General Requirements.a) UL 60950-1, Second Edition, Underwriters Laboratories Inc.Information Technology Equipment -Safety -Part 1 : General Requirements.b) CAN/CSA C22.2 No.60950-1-07, Second Edition, Canadian Standards rmation Technology Equipment -Safety -Part 1 : General Requirements.d) IEC 60950-1:2005, Second Edition,The International Electrotechnical Commission (IEC).Information Technology Equipment -Safety -Part 1 : General Requirements.(Including report of IEC60825-1:2001 clause 8 and clause 9)Notes1. Laser (LED Backlight) InformationClass 1M LED Product IEC60825-1 : 2001Embedded LED Power (Class 1M)2. Caution : LED inside.Class 1M laser (LEDs) radiation when open.Do not open while operating.a) ANSI C63.4 “American National Standard for Methods of Measurement of Radio-NoiseEmissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.”American National Standards Institute (ANSI), 2003.b) CISPR 22 “Information technology equipment –Radio disturbance characteristics –Limit and methods of measurement." International Special Committee on Radio Interference (CISPR), 2005.c) CISPR 13 “Sound and television broadcast receivers and associated equipment –Radio disturbance characteristics –Limits and method of measurement." International Special Committee on Radio Interference (CISPR), 2006.a) RoHS, Directive 2002/95/EC of the European Parliament and of the council of 27 January 2003Liquid Crystal Display8-2. Packing Forma) Package quantity in one box : 10ea b) Box Size : 747 X 335 X 4668. Packing8-1. Designation of Lot Marka) Lot MarkABCDEFGHIJKLMA,B,C : SIZE(INCH) D : YEARE : MONTHF ~ M : SERIAL NO.Note1. YEAR2. MONTHMarkYear 02010620067200782008920094200452005321200320022001BNov MarkMonth AOct 6Jun 7Jul 8Aug 9Sep 4Apr 5May C321Dec Mar Feb Jan b) Location of Lot MarkSerial No. is printed on the label. The label is attached to the backside of the LCD module.This is subject to change without prior notice.Liquid Crystal Display9. PRECAUTIONSPlease pay attention to the followings when you use this TFT LCD module.9-1. MOUNTING PRECAUTIONS(1) You must mount a module using holes arranged in four corners or four sides.(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to themodule. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module.(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.Transparent protective plate should have sufficient strength in order to the resist external force.(4) You should adopt radiation structure to satisfy the temperature specification.(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the formergenerates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction.(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HBpencil lead. And please do not rub with dust clothes with chemical treatment.Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental to the polarizer.)(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials likechamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer.(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causesdeformations and color fading.(9) Do not open the case because inside circuits do not have sufficient strength.9-2. OPERATING PRECAUTIONS(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage :V=±200mV(Over and under shoot voltage)(2) Response time depends on the temperature.(In lower temperature, it becomes longer.)(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.)And in lower temperature, response time(required time that brightness is stable after turned on) becomes longer.(4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer orelectrical contacted parts. And after fading condensation, smear or spot will occur.(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall bedone by system manufacturers. Grounding and shielding methods may be important to minimized the interference.(7) Please do not give any mechanical and/or acoustical impact to LCM. Otherwise, LCM can’t be operatedits full characteristics perfectly.(8) A screw which is fastened up the steels should be a machine screw.(if not, it causes metallic foreign material and deal LCM a fatal blow)(9)Please do not set LCD on its edge.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
点距(Pixel Pitch)
0.10375×0.31125 mm
产品组成(Panel Composition)
液晶屏,
面板类型(Technology)
a-Si TFT-LCD
主要用途(Applications)
【电脑显示器】,
显著特征(Panel Features)
【广色域】, 【白光LED】, 【雾面】, 【广视角】,
信号接口脚距(Pitch of Singnal Interface)
1 mm
信号接口脚数(Pin of Singnal Interface)
6 pins
工作温度(Operation Temperature)
0 °C ~ 50 °C
存储温度(Storage Temperature)
-20°C ~ 60°C
0329白场变动whitefielddynamic125points扫描频率scanningfrequency60hz反转扫描reversescan信号类型大类thekindsingnallvds接口类型interfacelvds信号接口定义singnalinterfacedefinitionble6pinsccaacc驱屏电压drivescreenvoltage50v面板输入电流inputcurrent08a信号接口类型kindsingnalinterface端子信号接口品牌brandsingnalinterfaceet信号接口型号modelsingnalinterfacefixpb30srlahf11信号接口脚距pitchsingnalinterfacemm信号接口脚数pinsingnalinterfacepinsm270hw02v1结构参数工作温度operationtemperature存储温度storagetemperature20c60c表面处理surfacetechnology雾面hardcoating3h显示区域activearea597633615mm外形尺寸outline63000368201200mm触摸屏touchpanel灯管位置lampposition侧入式光源背光类型backlightwled灯管数量lampnumber18s4ppcs灯管形状lampshape背光寿命lifetimelamp30khours单一灯管电压voltagelamp594v单一灯管电流currentlamp120ma内置灯管驱动器driverbacklightinterface端子背光接口品牌brandbacklightinterfaceet背光接口型号modelbacklightinterface3707kq06n01r背光接口数量quantitybacklightinterfacepcs背光接口脚距pitchbacklightinterface10mmmm背光接口定义backlightinterfacedefineble6pinsccaaccm270hw02v1包装及生产状态每箱数量quantityperboxpcs包装箱尺寸sizebox760264460mmbox2785kg开始量产时间datebeginproducing2011q2当前生产状态productionstatus量产中
背光接口数量(Quantity of Backlight Interface)
1 pcs
背光接口脚距(Pitch of Backlight Interface)
1.0 mm mm
背光接口定义(Backlight Interface Define )
BLE-6PINS-CCAACC
每箱数量(Quantity Per Box)
制造商(Productor)
友达/AUO
产品型号(MODEL)
M270ห้องสมุดไป่ตู้W02-V1
屏尺寸(Size)
27.0"
分辨率(Resolution)
1920×1080
分辨率简称(Resolution Name)
FHD
显示比例(Display scale)
16:9
像素排列(Pixel Arrangement)
8 pcs
包装箱尺寸(Size of the Box)
760×264×460 mm (长×宽×高)
包装箱毛重(G.W. of the Box)
27.85 Kg
开始量产时间(Date Begin Producing)
2011,Q2
当前生产状态(Production Status)
量产中
表面处理(Surface Technology)
雾面，Hard coating (3H)
显示区域(Active Area)
597.6×336.15 mm
外形尺寸(Outline)
630.00× 368.20×12.00 mm
触摸屏(Touch Panel)
无
灯管位置(Lamp Position)
侧入式光源
可视角度(Viewing Angle)
89/89/89/89(上/下/左/右)
最佳视角(The Best View)
上下左右对称
白场色度(White Field Chroma)
X:0.313; Y:0.329
白场变动(White Field Dynamic)
1.25 (9 points)
扫描频率(Scanning Frequency)
5.0V
面板输入电流(Input Current)
0.8A
信号接口类型(Kind of Singnal Interface)
端子
信号接口品牌(Brand of Singnal Interface)
E&T
信号接口型号(Model of Singnal Interface)
FI-XPB30SRLA-HF11
内置灯管驱动器(Driver of Backlight)
无
背光接口类型(Kind of Backlight Interface)
端子
背光接口品牌(Brand of Backlight Interface)
E&T
背光接口型号(Model of Backlight Interface)
3707K-Q06N-01R
背光类型(Backlight)
WLED
灯管数量(Lamp Number)
18S4P pcs
灯管形状(Lamp Shape)
4串
背光寿命(Life Time of Lamp)
30K Hours
单一灯管电压(Voltage of Lamp)
59.4V
单一灯管电流(Current of Lamp)
120mA
显示模式(Display mode)
MVA，常黑显示，透射式
亮度(Luminance)
300 nits
对比度(Contrast Ratio)
5000:1
颜色(Color)
16.7M
色彩饱和度(Color Saturation)
72%NTSC(CIE1931)
响应时间(Response)
7/5 (Tr/Td) ms
60Hz
反转扫描(Reverse Scan)
No
信号类型大类(The kind of Singnal)
LVDS
接口类型(Interface)
LVDS
信号接口定义(Singnal Interface Definition)
BLE-6PINS-CCAACC
驱屏电压(Drive-screen voltage)