老狗科技EBOX的说明书
洛雷克Eco BLAcKBox系列产品说明书
LH010 Eco BLAcKBoX SeriesVIEW ON TABLET, SMARTPHONE, PC & MAC 24/7 RELIABLE RECORDINGAFFORDABLE PEACE OF MINDiPhone ®iPad ®REMoTE coNNEcTIVITY & coMPATIBILITY*SUPER-RESSERIES8cHANNELS 4 oR8cAMERAS 500 GB oR 1TB 600TVL RESoLUTIoN 90/66FT NIGHT VISIoNWATcH oVER YoUR WoRLDFROM ANYWHERE IN THE WORLDMoBILE SURVEILLANcEConnect and view your system on the go with your Tablet or Smartphone over a 3G/4G or WiFi network.†SIMPLE YET ADVANcEDRecord on a surveillance grade hard drive, designed for 24/7 operation providing weeks or even months of reliable recording.1SIMULTANEoUS MoNIToR VIEWING Connect to a TV, PC, or CCTV monitors with industry standard VGA & BNC inputs.EASY SYSTEM NAVIGATIoNIntuitive menu options with simple icons allow for fast and efficient DVR programming.•H.264 video compression. D1 capable1 •Real time recording @ (360x240)•Pentaplex operation - View, Record, Playback, Back Up & Remotely control the system simultaneously•24/7 100% Duty cycle hard drive pre-installed •PTZ camera (not included) supported via RS485 •Exclusive LOREX Easy Connect Internet Set-up Wizard 2 •Instant Mobile Viewing on compatible Smart phones & Tablets† •PC and Mac Compatible (Internet Explorer & Safari browsers)†•Free LOREX DDNS (Dynamic Domain Name Service) for advanced remote connectivity at all times•Instant email alerts with snap shot attachment•Accurate Time Stamps with NTP & Daylight Savings TimeDIGITAL VIDEo REcoRDER:LH010 Eco BLAcKBoX Series•Super Resolution with enhanced optics•BrightNight Viewing with enhanced lowlight image sensor•Night Vision up to 90/66ft (28/20m) away 3•Anti-glare feature ensures clear images under strong lighting conditions•Accurate colours with Lorex’s automatic light filtering technology• 3.6mm wide-angle lens captures a 78° Field of View (diagonal) 4•Vandal resistant design with cable pass through mounting bracket•Weatherproof housing for indoors & outdoor installation (IP66) 5•Versatile mounting options: ceiling, counter or wall mountableFEATURESTRUE coLoRSSee accurate colors with Lorex’s automatic light filtering technology.VANDAL RESISTANT DESIGNProtective cable pass-through bracket and metal housing.VIEW YOUR WORLD -IN SUPER RESOLUTION.CLEAR VIDEO DAY AND NIGHTVIEW WITH BRIGHT-NIGHTWEATHERPROOF HOUSINGA SUPER RESoLUTIoN PERSPEcTIVEView your world with improved detail, sharpness, and clarity day and night.Ambient Lighting Total Darkness90FT66FTANTI-GLAREcoLoR REPRoDUcTIoNTypicalCameraAccurate colors with InfraredFilter TechnologyTypicalCameraAnti-glareTechnologycoNNEcTIVITY Easy ConnectLorex Auto Port Forward WizardSupported Operating Systems 4/8/16 ch: Windows ™ XP , Vista, 74/8/16 ch: Mac OSX Snow Leopard 10.6 or above BrowsersInternet Explorer & Safari 6.0Email notification T ext with snapshotInstant Smart Phone Compatibility† Smart Phone & T ablet Compatibility: iPad ®, iPhone ®, BlackBerry (supported model numbers: 9000, 9700, 9800), Android (version 1.5 & above), Windows Mobile (6.0, 6.5), Symbian 3rd & 5th generation phones.DDNSFree Lorex DDNSSystem Configuration Full setup configuration over network PortsProgrammable by UserNetwork Protocol TCP/IP / DHCP / UDP / DDNS / PPPoE Network Interface 10/100-Base-TX, RJ-45 Network Speed Control 48Kb ~ 8MB/sec.GENERAL Power Consumption4/8/16 ch: Approx. 15 watts (HDD Pre-installed)Supply V oltage4/8/16 ch: 100V AC-240V AC, 12VDC , 2A, 50/60Hz Unit Dimensions 4/8/16 ch:11.81”/300mm x 8.66”/220mm x (W x D x H)1.97”/50mmUnit W eight (KGs) 4 & 8 ch: 1.32 kgs/2.9 Lbs16 ch: 1.51s kg/3.33 Lbs Operating temperature32° ~ 104° F / 0° ~ 40° C Humidity10 ~ 90% NCDVR:PRoDUcT SPEcIFIcATIoNSSYSTEM Operating System Linux (embedded)Pentaplex Simultaneous View, Record, Playback, Backup & Remote MonitoringNumber of Channels 4/8/16 ChannelInputs/outputs Video IN 4/8/16 x 1Vp-p, CVBS, 75ohms, BNC Video OUT 4/8 ch: 2 x BNC, 16 ch: 1 x BNC VGA OUT 4/8/16 ch: Y esAudio IN4/8 ch: 1 Line in(RCA), G.71116 ch: 2 Line in(RCA), G.711Audio OUT 4/8/16 ch: 1 line out(RCA), G.711USB Port 1 at the back for Mouse, 1 at the front for firmware upgrade &USB backupVideo Output Resolution 800x600, 1024x768, 1280x1024 PTZ control RS-485 Pelco D & P ProtocolDisplay Live Display 4 ch: 1,4 8 ch: 1, 4, 816 ch: 1, 4, 9, 16Live Display Speed 120 (4 ch)/ 240 (8 ch)/ 480 (16 ch) NTSC100 (4 ch)/ 200 (8 ch)/ 400 (16 ch) P ALOSD ON/OFFSystem Navigation USB Mouse, IR Remote ControllerMotion Area Setting Adjustable grid (10 x15) NTSC Adjustable grid (12 x15) P AL Sensitivity levels 8Firmware Upgrade Via USB device and Network User Authority By user groupTime Synchronization Auto time sync by NTP serverREcoRDINGVideo Compression H.264 Audio Compression G.711Recording Resolution 4/8 ch: NTSC: 360x240 (CIF), 720x240 (HD1), 720x480 (D1) 4/8 ch: P AL: 360x288 (CIF), 720x288 (HD1), 720x576 (D1)16 ch: NTSC: 360x240 (CIF), P AL: 360X288 (CIF)Recording Speed: 4 ch: 120/100 (NTSC/P AL) @ CIF , HD1, 60/50 (NTSC/P AL) @ D1 8 ch: 240/200 (NTSC/P AL) @ CIF , 120/100(NTSC/P AL) @ HDI, 60/50 (NTSC/P AL) @ D116 ch: 480/400 (NTSC/P AL) @ CIFRecording Resolution Setting Per camera for different resolutions (CIF/2CIF/D1). 16 ch: CIF only Recording Quality Control 3 levelsRecording ScheduleBy hour, by day , by recording mode, by motion, by channel Pre Recording Max. 10 Secs Post Recording Max. 5 Minutes Reliability W atch-Dog, Auto-recovery after power failure Covert Video Y esPLA YBAcKPlayback Channel 1~4 Adjustable(4 ch), 1~8 Adjustable (8 ch), 1~16Adjustable (16 ch)Playback Speed V ariable Max 16x Playback Players Backup Player Search By time & eventLog Search Up to 10,00,000 lines for motion detected, configurationchanges, connects/disconnects and video loss.Audio PlayY esSToRAGE & ARcHIVE Storage4/8/16 ch: Up to 1 HDD’s (SA T A) Maximum Capacity 4/8/16 ch: Up to 2TB Backup Media USB Flash Drive & HDDBackup File FormatH.264 file (A VI generator included)CAMERA (CVC7572PK4B):Image Sensor: 1/3” Color Image Sensor Video Format: NTSCEffective Pixels: H: 758 V: 488Resolution: 600 TV Lines Scan System: 2:1 Interlace Sync System: I nternal S/N Ratio: 46.8dB (AGC Off)Iris: AESAES Shutter Speed: 1/60 ~ 1/100,000 Sec.Min. Illumination: 0.1 Lux without IR LED0 Lux with IR LEDVideo Output: Composite 1.0Vpp @75 ohm Lens / Lens Type:3.6mm F1.2 / Fixed FOV (Diagonal): 78°T ermination: BNC Type IR LED Qty / Type: 24 pieces / 850nm Night Vision Range: 90ft (28m)/66ft (20m) Power Requirement: 12V DC ±10%Power Consumption:Max. 280mA (w/IR)Operating T emp. Range: 14° ~ 122°F / -10° ~ 50°C Operating Humidity Range: < 60% RH Environmental Rating: IP66W eight (including stand):0.6lbs / 0.3kgMoDEL coNFIGURATIoN PAcKAGE W x D x H - Inches & mm WEIGHT cUBE UPc code LH018511C4F8 CH DVR x 4 (600) TVL Cameras(CVC7572PK4B) x 500GB HDD Universal Retail Box435mm x 263mm x 313mm/17.3” x 10.38” x 12.32”6.5 kg/14.4 lbs0.036245m /1.28ft7-78597-18514-0LH08548 CH DVR x 4 (600) TVL Cameras(CVC7572PK4B) x 500GB HDD Retail English Giftbox 435mm x 263mm x 313mm/17.3” x 10.38” x 12.32”6.5 kg/14.4 lbs0.036245m /1.28ft7-78597-08540-2LH0181011C8F8 CH DVR x 8 (600) TVL Cameras(CVC7572PK4B) x 1TB HDDUniversal Retail Box 406mm x 431mm x 300mm/16” x 17” x 11.82”9.8 kg/21.65 lbs0.0526m /1.86ft7-78597-18118-0INCLUDES8 Ch DVR with pre-installed HDD, Remote Control, Power Adapter, Mouse, Ethernet Cable, CD, QSG, Instruction Manual, 4 or 8 x Cameras, 4 or 8 x Camera Stands, 4 or 8 x 60ft BNC/DC Extension Cables, 1 or 2 x 4 in 1 Camera Power Adaptors.© 2013 Lorex Technology Inc.As our product is subject to continuous improvement, Lorex Technology & subsidiaries reserve the right to modify product design, specifications &prices without notice and without incurring any obligation. E&OE.Lorex Technology Inc.250 Royal Crest CourtMarkham, Ontario, Canada L3R 3S12-02222013DVR Inputs & outputs901 Elkridge Landing Road, Suite 100Linthicum, Maryland 21090,USA.PRoDUcT INFoRMATIoN8 channel DVRDISCLAIMERS:1. Recording time may vary based on recording resolution & quality, lighting conditions and movement in the scene.2. Requires a high speed internet connection and a router (not included).3. IR Illumination range under ideal conditions. Actual range and clarity may vary depending on scene/object reflection and camera application. Measurements are calculated using ambient lighting and total darkness conditions. Picture automatically switches to B&W delivering better clarity in low light conditions.4. Not intended for submersion in water. Installation in a sheltered location recommended.† PC (Microsoft Windows™ 8/7/Vista/XP) compatible using Internet Explorer browser. Mac OSX Snow Leopard 10.6 or above using Safari browser.† Smartphone & Tablet Compatibility: iPad®, iPhone®, BlackBerry (supported model numbers: 9000, 9700, 9800), Android (version 1.5 & above), Windows Mobile (6.0, 6.5). Mobile phone data plan is required (not included). Router port forwarding required. For the latest compatibility list check as new models become available in the market.• BlackBox is used solely as a marketing term and does not imply that the product can survive fire or extreme conditions. Use product in accordance with the instructions provided.- Number of Channels/ Cameras/ Accessories/ HDD (hard disk drive) capacity may vary by model. Check your package label for specific content information.All trademarks belong to their respective owners. No claim is made to the exclusive right to use the trademarks listed, other than the trademarks owned by Lorex Technology Inc. We reserve the right to change models, configurations or specifications without notice or liability. Product may not be exactly as shown. Images are simulated.DVRDimensions:cVc7572PK4B cAMERA。
穆老电子 iPod 悬挂架及车内视频更易使用操作指南说明书
Cradle w/ Video Outputfor iPod Installation instructions...We recommend the use of a “vehicle specific accessory mount” to attach the cradle to your dashboard without leaving any permanent marks.1. Remove the attached iPodadapter. You may use a flat headscrewdriver to help separate theadapter from the cradle basewhile pressing down on the clip.Exercise caution when using tools.2. T o access the mounting holes,rotate the base of the cradle asneeded. Use the screws suppliedwith your “vehicle specificaccessory mount” to attach thecradle to it. Rotate the cradlebase as you go from one screwto the next to allow room fortightening the screws.3. Once you have inserted andtightened all mounting screws,adjust the cradle to a desiredangle and rotation. With a flathead screwdriver, tighten the“angle set screw” (located in thecenter of the cradle) so that it willstay in it’s adjusted position.4. Select the appropriate adapterfor your iPod and snap it in placeby first placing the pegs into theirplaces and then leaning it backuntil the snap hook clips itin place.5. Connect a dock cable (notincluded) to the cradle. If thevideo output feature is to beused, an A/V cable should nowbe connected. (Apple partnumber: M9765G/A or equivalentmay be used)。
groov Box用户指南说明书
Form 2063-131004—October 2013Connect the power supplyPlug the small connector on the power supply into the terminal marked 14–36 VDC. Plug the other end into a standard 120 or 240VAC outlet. The LED marked PWR willlight solid green.Get to know the groov BoxTo set up the groov Box, you’ll use the groov Box components shown below. Make sure there is room around the front, top, and sides of the groov Box to allow air to flow freely though the fans on the sides. Also, you need to be able to see theinformation on the top.On/Off buttonLEDsETH0AirflowPower terminalLabelOpen groov in your web browsera.On your computer, open Firefox or Chrome.b.Enter https:// and your groov Box’s hostname as the URL. Thehostname is printed on top of the groov Box. For example, if thehostname is opto-01-ab-c2,you typehttps://opto-01-ab-c2c.Accept the security warning. Your groov data is protected by the SSL (secure socket layer) 256-bitencryption, so you can safely accept the warning.For Chrome : Click “Proceed anyway.”For Firefox:–Expand “I Understand the Risks.”–Click Add Exception to open the Add Security Exception dialog box.–Select “Permanently store this exception.”–Click Confirm Security Exception.The Welcome togroov window opens in your web browser.NOTE: If theWelcome to groov window does not open, your network configuration is probably unique. Please see the groov Box User’s Guide .Connect to the network Quick StartOpenUnpack the groov BoxYou need:• A computer with a modern web browser on the same network you’ll use for the groov Box. For the best user experience, we recommend Chrome or Firefox.•A PAC S-series, PAC R-series, or SoftPAC controller running a strategy with firmware R9.2a or newer, and a strategy developed in Opto 22’s PAC Control. The controller should be on the same network as your computer. The network should have DHCP & DNS.HostnameWatch 5 Minutes to groov op22.co/5min2groovTurn on the groov BoxBriefly press and release the On/Off button. Wait until the SYS LED has stopped blinking and is solid green. Also, take a look at the LNK ACT light for ETH0. If the cable is properly connected, the LNK ACT light should be on or blinking.In the box...Ethernet cableCDgroov BoxAntennas(attach before use)Spare fan filtersPower supplyConnect ETH0 to your computer’s network. If you have a separate control network, see the groov Box User’s Guide.LNK ACT lightForm 2063-131004—October 2013Get your tag database Build your operator interface(continued)Adjust the handheld layouta.Click the gear symbol in the upper-right corner of View, and select Switch togroov Build.b.Add several more tags and gadgets to your project, and arrange them in theDesktop & Tablet view.c.Click the Handheld tab at the top of the work area. You’ll notice that thegadgets are arranged differently in the Handheld view, but they contain exactlythe same gadgets, taqs, and properties.d.Drag each gadget into position, and resize it as necessary for the Handheldview.a.In the upper right corner, configure the RoundGauge properties.To add a zone, click the Add Zone button. Choosethe Min Value, Max Value, and Units that makesense for your variable.b.Select File > Save All and Switch to groov View.You should now see the Round Gauge running inView. The needle shows the tag’s current value.The last wordActivation key Create new usernames and passwordsDrag into positionResizee.Switch to the Desktop & Tablet layout. You’ll notice that arranging the gadgetsin the Handheld layout does not affect the Desktop & Tablet layout.Activating the groov Box and getting updates: Before continuing with yourproject, make sureto activate your groov Box. This is required to take advantage ofimportant updates from Opto 22. You’ll need the activation key that’s on the top ofthe groov Box. Go to To get updates at any time, go to . For update instructions, seethe groovBox User’s Guide on the groov Box CD.Backing up your project: As you work on your project, make sure to back upfrequently in groov Build. For more information, see the groov User’s Guide.a.Click Add Page on the left side under Pages.b.Type a new name for the page, then click OK.c.With the Tags tab selected in Gadget Palette, clickthe plus sign next to the strategy name to expandthe list of tags.d.Click a Numeric Variable tag that changes its valuefrequently.e.In the pop-up dialog box, double-click a RoundGauge.a.In Build, select select Configure > Controllers.b.Click Add Controller.c.Enter the IP address of aPAC S, PAC R, or SoftPACcontroller running a strategyyou would like to use.d.Click Browse to locate theidb.txt file for your strategy.The .idb.txt file resides in thestrategy’s directory. It’screated when the strategy iscompiled.e.Highlight the idb.txt file, click Open, and then click Import. Build imports the.idb.txt file with the strategy’s tags.f.Close the Configure Controllers dialog box.Follow the on-screen instructions to create usernames and passwords forgroov Admin and for groov Build. The security warning will appear once more; whenit does, accept the warning again.CAUTION: Write down your Username and Password, and keep it in a safe place.You will need this information each time you log in. If you lose your logininformation, you will have to reset the groov Box back to factory defaults which willerase your project. There is no password recovery option.After you have completed the instructions in Welcome to groov, groov Build opensin your web browser.。
飞利浦 GoGEAR MP3 视频播放器 ViBE 4GB 产品介绍说明书
飞利浦 GoGEAR MP3 视频播放器ViBE4GB*SA1VBE04P让动听音乐和视频剪辑常伴身边小巧的设备，丰富的娱乐外观超紧凑的飞利浦 GoGear ViBE 便携式影音播放器蕴藏着丰富的娱乐体验。
其 1.5 英寸全彩色显示屏会显示相册图画和文件夹视图，确保您轻松地进行文件导航和整理。
您的随身影音节目—享受每一天• 所提供的不仅仅是数字语音书籍•播放来自订阅服务的 MP3、WMA 或 DRM 音乐•具有 RDS 和 20 个预设电台的 FM 收音机，为您提供更多音乐选择随身携带，伴您同行•1.5 英寸全彩色显示屏，导航更方便，并可欣赏相册图画•长达 25 小时的音乐或 4 小时的视频播放•小巧耐用，便于携带•通过录音功能，您可随时录制留言或任何其它内容简约、直观的体验•从互联网轻松地将视频下载到 GoGear•简易、直观的用户界面，具有相册图画显示•文件夹视图让您可以像在电脑上一样整理和查看媒体文件•通过 USB 直接从电脑充电发行日期 2019-06-12版本: 3.0.512 NC: 8670 000 52507EAN: 87 12581 48223 7© 2019 Koninklijke Philips N.V.保留所有权利。
规格如有更改，恕不另行通知。
所有商标是Koninklijke Philips N.V. 或它们各自所有者的财产。
规格MP3 视频播放器ViBE 4GB*产品亮点3.8 厘米（1.5 英寸）全彩色显示屏凭借 3.8 厘米（1.5 英寸）全彩色显示屏，您可在控制菜单内轻松导航，或在 GoGear 播放器上定位音乐文件。
不仅如此，您还可以在随身欣赏音乐的同时浏览照片。
互联网视频下载借助方便的互联网视频下载功能，随时随地欣赏视频。
您可以通过该功能从视频共享网站（YouTube 、MySpace 或 Google Video ）将视频下载到 GoGear 。
海天注塑机数据采集
老狗科技“极简工业-海天注塑机数据采集”解决方案极简工业-海天注塑机数据采集，是一套全新价值理念，高性价比，即插即用，硬件+APP+大屏，无需注塑机厂家开放设备的通讯协议接口即可全量数据无损接入。
方案采集的数据准确，可以第一时间帮助管理者对设备及企业的发展做出准确的判断与抉择，真正意义上实现降本节能、提质增效。
硬件+APP+大屏，可满足您全方面的需求：
注塑机数据采集网关EBOX-DKM：
注塑机数据监控手机端：
注塑机数据监控电脑端：
联塑注塑机数据采集项目现场图：
客户价值：
1)科学管理，将设备与生产数据交互，提高生产效率；
2)降低人力成本，减少不必要浪费；
3)工艺管理，产品工艺知识库、品质追溯，提升产品品质；
4)科学维保，减少停机时间、延长注塑机使用寿命；
5)能耗管理，提升能效，降低能耗浪费；
6)提升信息化水平；
7)数字化员工绩效、工作能力；
8)产量与人工工时、能耗进项关联，科学成本核算。
Godox Quicker H200 说明书
82.A0QU6001-03 VB说明手册Instruction Manual中英文双语Chinese English BilingualThanks for choosing Quicker high-speed flash. It has wide-range applicability, not only perfect for all kinds of studio and workshop photography, but also good at wedding, portrait, advertisement, and fashion photography. Without recycling time limits, photographers can capture a series of fast-changing facial expressions and amazing moves, and clearly freeze each fleetingly perfect instant into eternal beauty. Among the benefits you’ll enjoy:Ultra-speedy charging, 0.05-1.2s recycling time Multi-freeze shots, 1/5000s-1/800s flash durationUp to 10 shots in one second under high-speed continuous shootingExact output control on LED display, 50 steps from 5.0-10.0 by 0.1 increment High qualified modeling lamp, 150W output adjustableOutstanding output stability, less than 2% shifts when under the same outputHigh color stability, ranging within ±100k between flashes over the entire power rangeFlash output on/off and power level,modeling lamp and buzzer on/off,and flash triggering can be controlled by using Godox FT series romote control.01 Foreword05 Power Output Control 02 For Your Safety 05 Test Button 02 Caution05 Sync Triggering 05 Slave Trigger Model 03 Names of Parts 06 Buzz Function 03 Body06 Memory Function04 Accessories06 Wireless Control Function 04 Separately Sold Accessories 06 Tube Replacement 04 Operations07 Technical Data 04 Flash Preparation 05 Power Connection 07 Maintenance05 Modeling Lamp• • • • • • • • • • • • • • To prevent damage to the product or injury to you or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where users can read them for ready reference.Do not disassemble or modify !There are high-voltage components inside the unit. Failure to observe this precaution could result in electric shock or product malfunction. Should the product break open as the result of a fall or other accident, send the defective back to authorized service center for inspection and maintenance.Keep dry !Do not handle with wet hands or immerse in or expose to water or rain. Failure to observe this precaution could result in fire or electric shock.Keep out of the reach of children !This device contains small parts that may pose a choking hazard. Consult a physician immediately if a child swallows any part of this device.Do not expose to high temperature !Do not leave the device in a closed vehicle under the sun or in other areas subject to extremely high temperature. Failure to observe this precaution could result in fire or damage to the housing or internal parts.BodyNAMES OF PARTS1. AC Power Socket 8. Slave Model Button SLAVE 15. Light Sensor2. Sync Cord Jack 9. Test Button 16. Fuse3. Power Switch 10. Digital Display17. Mounting Bracket 4. Modeling Lamp Output Controller 11. Modeling Lamp Indicator 18. Umbrellas Input5. Flash Output Controller 1 2 . B u z z I n dicator19. Direction Adjusting Handle 6. Modeling Lamp Button MODEL 13. Slave Trigger Indicator 20. Wireless Control Port7. Sound Button 14. Test Indicator Lamp1. Sync Cord2. Power Cord3. Standard Reflector4. Lamp Cover5. Glass Protection Cover6. Modeling Lamp7. Instruction ManualAccessoriesSeparately sold accessoriesThe product can be used in combination with the following accessories sold separately, so as to achieve best photography effects:FT-16 Remote Control, Power Inverter , Softbox , Photographic Umbrella , Light Stand , Barndoor , Snoot , etc.OPERATIONSFlash Preparation1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector.(To uninstall the standard reflector, press the orange release button on the flash head and turn the standard reflectorcounter-clockwise to take it out, as illustrated in the picture.)2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket (17) for a good angle and make sure it’s tightened and fixed. Use the direction adjusting handle (19) to adjust the flash on a desired direction. Umbrella input (18) is for different photo umbrellas to put in.1504010702081914091003050611121617131820123456Shut down the power and remove the power cord before replacing the flash tube and wear insulated gloves. Then, loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and target directly towards the twocopper outlets, then push them slightly in. Twine the iron wire on the stainless steel sheet to fix the flash tube.Modeling Lamp Button (6) controls the modeling lamp status: when modeling lamp indicator lit up, modeling lamp turns on;when modeling lamp indicator off,modeling lamp turns off. Modeling lamp output controller (4) can be used to adjust the modeling lamp power output. Modeling lamp will turn off automatically after lighting for 2 hours, in case it's forgotten to turn off when user is not nearby.Power ConnectionUse the power cord to connect the flash to an AC power source and turn on the power switch (3). The lamp on the power switch turns on, indicating it’s connected.Modeling LampFlash output controller (5) decides different power output, satisfying the light requirements in different environment. The power is adjustable freely from 5.0 to 10.0 which will be accordingly told on the digital display (10). “OF”on the display indicated that the flash triggering function is turned off. It can discharge automatically when the flash output is adjusted from high to low.Power Output ControlTo fire the flash without taking a picture, press the test button (9). It can also help adjust the Test ButtonThe sync cord jack (2) is a Φ6.35mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter.Sync TriggeringT hree slave triggering models are available and can be set by pressing Slave Model Button (8).1) No optical control: The slave triggering indicator (13) is off, indicating the slave triggering function is shut down.2) One fire model: The slave triggering indicator (13) glows blue, indicating the flash will fire synchronously after receiving one external flash. In this model, the flash can function as an auxiliary lamp, offering various effects of light and shadow.3) Anti-preflash model: The slave triggering indicator (13) glows red, indicating the flash will receive two external flashes within 2 seconds and will fire synchronously after receiving the second flash. In this model, the flash can function as an auxiliary lamp, applicable to TTLSlave Trigger Modelsystem. With this anti-preflash function, synchronization is supported with cameras having a one-preflash firing system.The sound button (7) is used to decide whether there is sound reminder for ready flash after recharging. When the buzz indicator (12) turns on, it means buzz function is working; if it turns off, the buzz function is not working. A “BI” sound will be heard when it’s fully charged.Buzz FunctionThe device is equipped with memory function for the panel setting. It will help remember the panel setting 3 second after you set it. When starting up the flash next time, the panel setting will be the same as the status before powering it off.Memory FunctionTube ReplacementBy using the wireless power-control flash trigger, you can wirelessly control the on-and-off of your flash, modeling lamp and buzzer, as well as adjust the flash output level. To start this function, insert the trigger receiver into the Wireless Control Port (20) and make settings on the trigger. You can also press the camera shutter-release button to trigger the flash by setting the transmitter hotshoe onto the camera hotshoe.Wireless Control FunctionModelMax Power (WS)Guide Number(m ISO 100)Color Temperature Operating Voltage Power Output Control Modeling Lamp (W) Recycle Time Triggering Method Flash Duration FuseDimensionNet Weight5600K±100KAC200-240V/50HZ5.0~10.0 (1/1~1/128)150W0.05~1.2secsync cord, test button, slave, wireless control port1/5000S~1/800S8AFlash diameterΦ14CM, height of flash with handle 23CM, length of flash with lamp cover 41CM Approx. 2.7KGShut down the device immediately when it works abnormally and find out the reason.Avoid sudden impacts and the lamp should be dedusted usually.It’s normal for lamp being warm when in use. Avoid continuous flashes when it is not necessary.Maintenance of all the flashes is up to our authorized maintenance department which can provide original accessories. Users can replace the flash tube and modeling lamp provided by the manufacturer.One year warranty period will be cancelled when any unauthorized maintenance is found.If the product had failures or was wetted, it can be continuously used only after it is repaired by professionals.Disconnect the power when doing maintenance work or cleaning.New changes made to the specifications or designs may not be updated in this manual. 感谢您使用闪客高速闪光灯，此系列产品适用广泛，除了能满足各种影楼和摄影工作室的日常拍摄，在婚纱摄影、广告拍摄、人像摄影、时尚摄影等方面表现尤为出色。
EBOX-2300MX用户手册
eBox-2300MX本用户手册中所有条款及细则只供参考，并可能随着产品的升级做出相应的改动，如有更改恕不另行通知。
本手册所有版权归ICOP科技有限公司所有。
厂家对手册中包含的错误不负任何责任，厂家保留更新或者维持本手册的权力。
本用户手册全部内容或任何部分，除ICOP科技书面许可外，不得擅自以任何形式和任何方式再次发布、复制转载和传播，未经书面许可而用于商业目的，均被视为侵权行为。
版权2010年ICOP科技有限公司用户手册编号：IUMeBox2300MX-01 Ver.J1.1日期：2010年1月1日用户注意ICOP科技未提供关于这一手册中软件或软件其他的信息，这明确的表明本公司没有暗示保证商品或合适任何用途而对此手册、软件或软件的其他信息。
无论何因ICOP科技都不负责被任何附带的、间接的软件方面侵权行为，本手册中软件或其他信息请自行协议使用。
ICOP科技保留作出任何修改的权利，本手册中包含的信息在任何时候没有提到用户任何的软件许可协议的描述。
在ICOP科技所有产品使用的软件都有第三方许可。
产品使用软件在条款和条件的许可协议中。
软件规格和版本如有变更恕不另行通知。
更新和替换的软件可能需要额外费用，订阅网络服务可能需要自行付费给供应商，订阅金融服务可能需要事先的安排金融机构参与。
eBox-2300MXeBox-2300MX安全信息警告不要将eBox-2300MX至于室外下雨或潮湿的环境中使用。
请勿在潮湿的环境下安装使用你的eBox-2300MX电脑。
请勿尝试自行打开机壳以防发生触电意外或造成设备损坏，如有需要请由专业的技术人员处理，或联系离你最近的供应商来为你服务。
请勿在本产品或其他电子设备运作的情况下接摸未绝缘的线路。
尽可能近的找出eBox-2300MX电脑的电源插座，为了通道畅通和为了避免你的电源线同周围其他的电脑用的接线缠绕起来。
在使用eBox-2300MX电脑时，如遇雷雨或闪电时尽可能避免连接使用数据机或网络。
BirdDog Eyes P200用户指南说明书
USER GUIDE | MAY 2019PART 2: NDI ® INSTRUCTIONSEYES P200WELCOME TO THE FUTURE.GETTING TO KNOW P200Physical connectorsPowering P200PoE+ (Power over Ethernet)DCThermal managementBOOTING UP YOUR BIRDDOG EYES P200 Indication of system boot processOPERATING P200Web configuration panelAccess via web browser (URL)BirdDog Finder applicationAccessing P200 via an IP addressAccessing P200 on a network without a DHCP serverPASSWORD MANAGEMENTDefault passwordPassword resetA/V SETUPCam Audio selectionNDI Audio selectionNDI Video selection3G/1.5G Video QualityNETWORK SETTINGS AND DEVICE NAMING Device namingIP configuration methodDHCP IP addressStatic IP addressTALLY SUPPORTOnboard TallyFIRMWARE UPDATERECEIVING NDI VIDEONewTek Studio MonitorNewTek TriCaster Series455667899 EYES P200FULL NDI®. NO COMPROMISES.GETTING TO KNOW YOUR P200Thanks for purchasing BirdDog Eyes P200. Please take some time to read this document to allow you to get the most out of your purchase and familiarize yourself with the features available in the unit.Physical connectorsPowering Eyes P200P200 is equipped with a sophisticated system allowing power from various sources:PoE+ (Power over Ethernet)PoE+ is a convenient way to power P200 as it allows both data and power to be sent through the same standard Ethernet cable. To take advantage of PoE+, the network switch that P200 is directly plugged into must support PoE+ (802.11at).Different network switches are capable of providing differing amounts of total power to all connected devices. P200 uses approximately 14 watts in PoE mode.DCLocated at the rear of the P200 is a DC connection port. This power input socket is capable of accepting 12vDC power. P200 should only be powered by the included AC adaptor.Thermal managementEyes P200 has been engineered to be passively cooled, no fans are required. In order to achieve this the entire enclosu-re of P200 is designed to dissipate heat. The main processor is capable of operating up to 100º C / 212º F.Some factors affect how much heat BirdDog will produce, and it is normal for it to feel warm to the touch.In extreme circumstances (a hot day/direct hot sun) it is advised to power P200 via DC as this produces less heat than PoE.BirdDog has been tested in extreme environments.IR SelectUSB Video FormatDC 12VRS232RS422Audio OUT CVBS Audio IN HDMI3G-SDI PoEBOOTING UP YOUR BIRDDOG EYES P200Indication of system boot processAs soon as BirdDog P200 detects a power input signal the left hand 'power/fault' light will light up green.1On the ethernet/NDI connector on the rear.After initial boot up is complete your P200 unit will be visible as a source on any NDI compatible devices on the SAME ethernet subnet.For further networking architecture instructions including routing please consult either your system administrator or the support page at OPERATING EYES P200Web configuration panelIn this release, the web configuration panel allows you to alter key settings of P200, specifically A/V settings, and video frame rates, restarting the video processing engine, changing networking parameters, recalling PTZ presets and applying firmware updates.Access via web browser (URL)To access the web configuration panel please point your computer web browser to: http://birddog-xxxxx.local/“xxxxx” is the serial number of the P200, the serial number is printed on the box and on the main unit. Note the web address is case sensitive and should be all lower case. Your computer will need to have ‘Bonjour’ services loaded in order to access the unit via it’s ‘friendly’ name described above.Apple devices come pre-installed with Bonjour, while Windows devices need a small plugin available here:https:///kb/dl999?locale=en_AUBirdDog Finder applicationIn addition to typing this URL in manually there is an applica-tion: BirdDog Finder, which is available from /firmware-updates . This application looks on the local network for any N DI capable P200 and launches the web configuration interface directly from the application.Accessing P200 via an IP addressP200 is configured to automatically receive a network (IP) address from the computer network via DHCP (Dynamic Host Configuration Protocol). Most corporate, education and home networks have a DHCP server present on the network to allow this to occur. Usually your Internet Router provides this.If P200 receives an IP address automatically from this server (DHCP) the IP address can be discovered in several ways, including the BirdDog Finder application or BirdDog Central Lite available from: /Accessing P200 on a network without a DHCP serverSome standalone or private networks may not have a DHCP server. After 30 seconds of searching for an automatically assigned IP address P200 will fall back to a default address which is:192.168.100.100In order to access the web configuration panel on a network which is configured to a different subnet, change your computers IP address to match the BirdDog unit. Once you gain access to the BirdDog web configuration panel choose your IP address to match the rest of the devices on your network.For instructions on setting your computers IP address please consult your computer operating system manual or IT support resources.Note: only the last 5 digits are required for accessing the web interface.PASSWORD MANAGEMENTOnce you direct your web browser to the web configuration panel you will need to log in to change any settings.Default passwordThe web configuration panel is secured by a user-selectable password. The default password is: birddog (one word, lower case).To change the password simply login using the default password, navigate to the network tab in the web interface, and select change password.It is recommended to change this password in a network environment where P200 is shared with other users (e.g. not private). By entering this password, the user is granted full access to the P200 configuration settings and could interrupt a live program.A/V SETUPCAM Audio selectionThe 3.5mm stereo audio inputs on the P200 can accept either Line or Mic levels, please select the correct setting here to ensure appropriate audio levels are maintained.NDI Audio selectionP200 is able to operate its audio configuration either as an embedded stereo pair within the same NDI stream as the video or utilising the audio input/speaker output as a BirdDog Comms audio talkback system client. For more information on BirdDog Comms please see the BirdDog website.PTZ SERIESNDI Video selection:3g Video Quality:1.5 Video Quality:NDI Video selectionEyes P200 is capable of outputting independent video formats for both N DI and SDI/HDMI. This setting affects only the NDI video output. Please note that the video rate you select here must be of the same family as the SDI/HDMI video output set in Part 1 of the P200 Manual.ie. 720p50 aligns with 1080i50/1080p50 but will not co-exist with any 29.97/30fps based camera setting.3G/1.5G Video QualityBy choosing LOW, MEDIUM or HIGH on the Video quality settings you can adjust the amount of network bandwidth the full N DI stream produced by the BirdDog consumes. This directly affects image quality and should only be adjusted by advanced operators.LOW - 30% lower than 'target' NDI rates MEDIUM - 'target' NDI bandwidthHIGH - 30% higher than 'target' NDI ratesIP configuration methodYou can configure P200 to operate on the network with a dynamic (DHCP) IP address or a fixed address.For smaller networks DHCP networking is generally suitable, however larger networks with managed opera-tions will often determine each device needs to have a dedicated and static IP address.DHCP IP addressDHCP is set as the network configuration by default for Mini.Static IP addressTo enable a static IP address, change configuration method to static and fill in the details required in Address, Mask and Gateway. Particular attention should be paid to the Address and Mask fields as incorrect information entered will result in P200 not being visible on the network and a factory reset will be required in order to recover the unit.IP address recoveryIn the event that the P200 is not visible on the network, the network has changed, or the static IP address details have been lost, reset the BirdDog back to its default settings by following the factory reset procedure.BirdDog nameYou can name each P200 with a friendly name that makes sense for each production (Camera 1, Camera 2, etc). This name will appear on any N DI receiver when it looks for video coming from Mini over the network. The name must not include any special characters and can be any combina-tion of ‘a-z, 1-0, and –‘.Note: no uppercase characters are valid.On NDI receiving devices, P200 will present as a source as follows:birddog-name [CAM]when the unit is set to automatic input.Configuration method:Address:Mask:Gateway:DHCP timeout:Static fallback address:Static fallback mask:BirdDog Name:DASHBOARD PTZ SYSTEM A/V SETUP LOGOUTPTZ SERIESNETWORK SETTINGS AND DEVICE NAMINGDevice namingWhen P200 is first powered on it defaults to the naming convention as described in the web configuration panel section of this manual.http://birddog-xxxxx.local/It is possible to change the name along with the network settings to better suit your environment.In the web configuration panel, navigate to the network section.IMAGE SETTINGFor exposure/white balance & picture control details please refer to Part 1 of the BirdDog Eyes user manual.TALLY SUPPORTOnboard TallyP200 supports Tally within the NDI protocol. Tally is a method of identifying which source is being used ‘on air’ at any particular time.Whenever a P200 source is being used on the program output of an NDI compatible receiver that supports Tally metadata, the LED will light up red on the front of the P200 unit.RECEIVING NDI STREAMSThere are many applications that support receiving the NDI signal that P200 produces. Each application will vary slightly on how you choose your source.NewTek Studio MonitorN ewTek provide a free Studio Monitor application that allows you to monitor many N DI sources on a standard Windows computer. Once Studio Monitor is launched on your computer, simply right click anywhere in the interface and select your Mini from the drop-down list.Once connected to the P200 you will notice a configuration cog appears on the bottom right-hand side of the video display, this is a shortcut to access the P200 web configura-tion panel.NewTek TriCaster SeriesNewTek TriCaster series devices allow several NDI sources to be received simultaneously, the amount of simultaneous connections varies by what model TriCaster you have. Consult your TriCaster user manual to determine how many connections are available on your device.To select P200 as a source on your TriCaster, simply click on the configuration cog below your desired source location, this will bring up the Input Setting dialog, select from the drop-down list your P200 source.Once connected to the P200 you will notice a configuration cog appears next to the source drop down window, this is a shortcut to access the P200 web configuration panel.The screen will update the status of the update procedure, once complete it will reboot the main processor. Please wait for 30 seconds and refresh your browser to access the unit again.UPDATE - PROGRESSWaiting for update service...Connected to updater service...Processing update package: birddog-p200.fw Extracting...Changing directory...Checking if update script exists in packaging...Running in-packaging updater script...Updating package repositories...Installing required packages...Stopping BirdDog services...Copying new BirdDog data...Setting default systemd target...Rebooting...DASHBOARD NETWORK PTZ A/V SETUP LOGOUTPTZ SERIESFIRMWARE UPDATEP200 is updateable via the web interface. Please check the below address regularly to ensure you have the latest firmware available for your device.Having the latest firmware ensures you have all the latest features and performance updates to get the most out of P200: /firmware-updatesAfter downloading the latest firmware release, navigate to the settings tab on the P200 web configuration console click on Choose file… select the firmware update file and press the update button.SYSTEM UPDATE Update file:CONFIG. UPDATE Update file:DASHBOARD NETWORK PTZ A/V SETUP LOGOUTPTZ SERIES *****************。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
老狗科技EBOX的说明书
1、产品介绍：
深圳老狗科技注塑机数据采集器EBOX-DKM,是一款针对注塑机实现数据采集的设备，无需注塑机设备生产商开放协议，只需将采集网关设备与注塑机控制器连接，即可对注塑机进行全量数据无损接入，高性价比，即插即用，兼容老旧注塑机及周边设备，可对接本地服务器、云平台、MES、ERP等第三方系统的数据。
2、功能特点：
1）支持注塑机型号
弘讯TECH系列、弘讯AK系列、科强F系列、东华CAN系列、思达尔、宝捷信、盟立、华大、联升等。
2）支持注塑机
海天、力劲、泰瑞、佳明、双马、宁波通用塑机、申达、海雄、海达、丰铁、大禹、东华、伊之密、百科、博创、立式注塑机、发那科、住友、富强鑫等。
3）支持注塑机控制器
弘讯、科强、华大、发那科、住友、KeBa、star、宝捷信、盟立、谛洲、台湾长新、PLC类等。
4）支持注塑机周边设备类型
干燥机、模温机、粉粹机、混料机、吸料机、*供料系统、机械
手、冷水机、空压机等。
3、产品优势：
1)无需授权协议即插即用、兼容老旧注塑机及周边设备；
2)边缘计算数据准确、并可挖掘更多可用数据*；
3)数据分频传输数据应用，减轻服务器后台数据处理负荷；
4)兼容性好，可接入注塑机周边设备，包括注塑机能耗、机械臂、模温机、干燥机、冷水机、空压机等。