Aerial Lift Safety in Construction
建筑工程施工安全管理研究 外文翻译
本科毕业设计（论文）外文翻译译文学生姓名：院（系）：电子工程学院专业班级：安全0803指导教师：完成日期：20 年月日开发一个评估施工现场安全管理系统有效性的模型Developing a model to measure the effectiveness of safety management systems of construction sites作者：Evelyn Ai Lin Teoa,_, Florence Yean Yng Linga起止页码：1584~1592出版日期（期刊号）：2005年6月第005版出版单位：新加坡环境国立大学摘要:在新加坡,实施了建筑行业安全管理系统(SMS)和SMS审计大约有十年之久的现在,安全标准的提高并不显著。
为了回应需要改进的有效性(SMS)和安全管理体系审计的目的,本文提出了一种方法, 人员可以利用测试工具来评估审计建筑公司安全管理体系的有效性。
研究方法采用了15个步进行调查，安全专家被邀请通过面试或工作表达自己的意见。
层次分析法(AHP)及因子分析是用来协助识别影响最为关键的因素和属性的安全。
该模型开发利用多属性值模型(MAVT)的方法。
该方法可以通过网站得到验证审核,利用模型中施工安全指数(CSI)可以计算出来。
结果表明,该模型可以作为一个客观CSI衡量不同管理和评估。
关键词: 安全管理体系;安全审核;施工安全指数1 简介: 支撑这一工作的论据安全管理体系(SMS)作为建筑业一个正式制度的管理现场安全的体系。
承包商预期管理现场安全通过正常的安全管理体系。
如何有效地评价这些系统是很重要的,这样可以使不足之处得以更正。
该研究工作是在协作与职业安全部门监督下进行的,人力资源部门可根据当局评价审计协议来衡量一个建筑工地的有效性的安全管理体系。
新加坡建筑行业服务实施了安全管理体系审计大约有十年之久了,但是提高的安全效果并不显著。
这与影响船舶的修建行业一样,经历了一个稳定提高安全性能的阶段。
施工环境安全风险英文
施工环境安全风险英文Construction Site Safety RisksConstruction sites are known to be high-risk environments with various safety hazards that can pose serious risks to workers and the surrounding community. It is critical for construction companies to implement effective safety measures and protocols to minimize the occurrence of accidents and injuries. This article aims to highlight some of the common safety risks in construction environments.1. Falls from heights:Working at heights is a common requirement in construction projects. Falls from ladders, scaffolds, roofs, or other elevated surfaces can result in severe injuries or even fatalities. It is essential to provide workers with proper fall protection equipment, such as harnesses, safety nets, guardrails, and ensure they are trained in their usage.2. Electrocution:Construction sites often have electrical wires, power tools, and equipment that can expose workers to the risk of electrocution. It is crucial to identify and mark electrical hazards, conduct regular inspections of electrical systems, and provide workers with training on electrical safety protocols.3. Struck-by accidents:Workers are at risk of being struck by heavy machinery, falling objects, or vehicles operating in the construction area. Maintaining a safe distance from moving equipment, wearing high-visibilityclothing, and using signage to indicate hazardous areas can help prevent struck-by accidents.4. Caught-between accidents:Construction workers may get caught or trapped between heavy machinery, equipment, or collapsing structures. Ensuring proper lockout/tagout procedures, implementing machine guarding, and training workers on safe operating procedures can prevent caught-between accidents.5. Hazardous material exposure:Construction sites often involve the use of hazardous materials such as asbestos, lead, and chemicals. Failure to properly handle, store, and dispose of these substances can lead to serious health risks for workers and nearby communities. It is essential to provide workers with appropriate personal protective equipment, conduct regular air quality monitoring, and follow proper disposal protocols.6. Noise exposure:Construction sites can generate high levels of noise, which can lead to hearing loss or other hearing-related issues for workers. Implementing engineering controls, such as noise barriers or soundproof enclosures, and providing workers with hearing protection can help reduce noise exposure.7. Trips and slips:Construction sites are often cluttered with materials, tools, and uneven surfaces, increasing the risk of trips and slips. Maintaining a clean and organized work environment, ensuring proper lighting,and providing workers with non-slip footwear can help prevent these accidents.8. Crane accidents:Crane operations carry inherent risks, including collapse, tipping, or contact with power lines. It is crucial to hire qualified crane operators, conduct regular inspections and maintenance of cranes, and establish clear protocols for crane operations.In conclusion, construction sites present various safety risks that must be addressed to protect workers and the surrounding community. By implementing proper safety measures, providing adequate training, and promoting a safety-first culture, construction companies can reduce the occurrence of accidents and create a safe working environment.。
有关航空的英语知识
有关航空的英语知识Here is an English essay on the topic of aviation knowledge, with a word count of over 1000 words.Aviation has been a fascination for humanity since the dawn of civilization. The ability to soar through the skies, to conquer the boundless expanse of the atmosphere, has captivated the imagination of people across the globe. From the early experiments of the Wright brothers to the cutting-edge advancements of modern aviation, the field of aviation has evolved into a complex and multifaceted industry that plays a vital role in our interconnected world.At the heart of aviation lies a vast and intricate body of knowledge. From the principles of aerodynamics to the intricacies of air traffic control, the world of aviation is a testament to the ingenuity and problem-solving capabilities of the human mind. Understanding the fundamental concepts that govern the movement of aircraft through the air is crucial for the safe and efficient operation of airborne vessels.One of the cornerstones of aviation knowledge is the science ofaerodynamics. This field examines the interactions between air and the surfaces of aircraft, studying the forces that enable flight. The principles of lift, drag, and thrust are essential for the design and performance of airplanes, helicopters, and other aerial vehicles. Aerodynamicists work tirelessly to optimize the shape and structure of aircraft, ensuring that they can achieve the necessary lift and stability to take to the skies.In addition to the technical aspects of aerodynamics, aviation knowledge also encompasses the intricate systems and components that make up an aircraft. From the powerful jet engines that propel planes forward to the advanced avionics that guide them through the air, every aspect of an aircraft's construction and operation requires a deep understanding of engineering principles. Pilots, mechanics, and engineers must be well-versed in the workings of the various subsystems, from the electrical and hydraulic systems to the flight controls and navigation equipment.The world of aviation is also heavily regulated, with a complex network of rules, regulations, and safety protocols that govern the industry. Pilots, air traffic controllers, and other aviation professionals must be highly knowledgeable about the regulatory frameworks that dictate the operations of aircraft, both in the air and on the ground. This includes knowledge of airspace designations, weather reporting and forecasting, and emergency procedures, among a myriad ofother critical topics.Beyond the technical and regulatory aspects of aviation, the field also encompasses a wealth of knowledge related to the human factors that influence the safe and efficient operation of aircraft. Pilots and crew members must be skilled in areas such as crew resource management, decision-making under pressure, and the physiological effects of flight. Understanding the human body's response to the stresses of the aviation environment is crucial for maintaining the well-being and performance of those who work in the industry.The knowledge required in the field of aviation is not limited to the technical and operational aspects. Aviation also intersects with a range of other disciplines, including meteorology, geography, and even psychology. Pilots and air traffic controllers must possess a deep understanding of weather patterns and their impact on flight operations, as well as the spatial awareness and decision-making skills necessary to navigate complex airspace.Moreover, the field of aviation is constantly evolving, with new technologies and innovations continuously reshaping the industry. Professionals in the aviation field must be adaptable and willing to embrace lifelong learning, as they navigate the ever-changing landscape of this dynamic industry. From the development ofadvanced composite materials to the integration of autonomous systems, the future of aviation promises to be both exciting and challenging.In conclusion, the depth and breadth of aviation knowledge are truly remarkable. From the fundamental principles of aerodynamics to the intricate regulatory frameworks that govern the industry, the world of aviation is a testament to the ingenuity and problem-solving abilities of human beings. As we continue to push the boundaries of what is possible in the skies, the importance of this knowledge will only grow, ensuring the continued safety, efficiency, and innovation of air travel for generations to come.。
Electrical safety in construction
Wiring Design and Protection
1926.404(f)(3)
− The noncurrent-carrying metal parts of equipment and grounding conductor terminals of the receptacles are bonded to the generator frame, and − The system complies with all other provisions of this section.
General Requirements
Splices
− Splicing devices suitable for use − Welding/brazing/soldering − Mechanically/electrically secure before soldering − Covered with insulation equivalent to that of the conductors − Insulating device suitable for purpose
Electrical Safety in Construction
29 CFR 1926 Subpart K – Electrical
Objectives
In this course, we will discuss the following:
Common electrical hazards Standards relating to those hazards Electrical equipment defects/hazards Tools/techniques used in identifying hazards
船舶甲板部物料英语词汇分类汇总
凡立水varnish
稀释剂thinner
牛油grease
煤油kerosene
钢丝绳油wire dressing oil/ tar oil
去漆水
撇缆绳heaving line
测水绳sounding rope
榔头hammer
长柄铲刀long hand flat scraper
地板胶
万能胶水general purpose glue
手摇钻hand drill
量油尺oil gauging tape
封舱胶布seal adhesive tape
油布tarpaulin
二副物料
尼龙旗绳halyard nylon
国旗national flag
海图橡皮eraser , rubber
秒表stop watch
双头开口扳手spanner
活动扳手adjustable spanner
手电锯electric saw machine
不锈钢尺stainless steel ruler
量水尺wooden sounding ruler
量水绳sounding rope
门锁lock
三合板three-lay board
五合板five-lay board
Suez Canal Special Tonnage Certificate
Panama Canal Tonnage Certificate
Certificate of Port of Registery
USEFUL PHRASES
modification regarding items of registry
be ready for mooring
2017工程建设国家标准(全)
工程建设国家标准本栏目内容未经允许不得转载！〖GB/T50001-2017〗房屋建筑制图统一标准〖GB/T50002-2013〗建筑模数协调标准Standard for modular coordination of building〖GB50003-2011〗砌体结构设计规范Code for design of masonry structures〖GB50005-2017〗木结构设计规范〖GB/T50006-2010〗厂房建筑模数协调标准Standard for modular coordination of industrial buildings〖GB50007-2011〗建筑地基基础设计规范Code for design of building foundation〖GB50009-2012〗建筑结构荷载规范Load code for the design of building structures〖GB50010-2010(2015年版)〗混凝土结构设计规范(2015年版)Code for design of concrete structures〖GB50011-2010〗建筑抗震设计规范(2016年版)Code for seismic design of buildings〖GB50012-2012〗Ⅲ、Ⅳ级铁路设计规范Code for design of class Ⅲ、Ⅳ railway〖GB50013-2006〗室外给水设计规范Code for design of outdoor water supply engineering〖GB50014-2006〗室外排水设计规范(2016年版)Code for design of outdoor wastewater engineering〖GB50015-2003〗建筑给水排水设计规范（2009年版）Code for design of building water supply and drainage〖GB50016-2014〗建筑设计防火规范(整合)Code for fire protection design of buildings〖GB50017-2017〗钢结构设计标准〖GB50018-2002〗冷弯薄壁型钢结构技术规范Technical code for design of cold-formed thin-wall steel structures〖GB50019-2015〗工业建筑供暖通风与空气调节设计规范Design code for heating ventilation and air conditioning of industrial buildings〖GB50021-2001〗岩土工程勘察规范（2009年版）Code for investigation of geotechnical engineering〖GBJ22-87〗厂矿道路设计规范Code for design of roads in factories and mining areas〖GB50023-2009〗建筑抗震鉴定标准Standard for seismic appraisal of buildings〖GB50025-2004〗湿陷性黄土地区建筑规范Code for building construction in collapsible loess regions〖GB50026-2007〗工程测量规范Code for engineering surveying〖GB50027-2001〗供水水文地质勘察规范Standard for bydrogeological investigation of water-supply〖GB50028-2006〗城镇燃气设计规范Code for design of city gas engineering〖GB50029-2014〗压缩空气站设计规范Code for design of compressed air station〖GB50030-2013〗氧气站设计规范Code for design of oxygen station〖GB50032-2003〗室外给水排水和燃气热力工程抗震设计规范Code for earthquake - resistant design of outdoor water supply,sewerage,gas and heating engineering〖GB50033-2013〗建筑采光设计标准Standard for daylighting design of buildings〖GB50034-2013〗建筑照明设计标准Standard for lighting design of buildings〖GB50037-2013〗建筑地面设计规范Code for design of building ground〖GB50039-2010〗农村防火规范Code for fire protection and prevention of rural area〖GB50040-96〗动力机器基础设计规范Code for design of dynamic machine foundation〖GB50041-2008〗锅炉房设计规范Code for design of boiler plant〖GB50046-2008〗工业建筑防腐蚀设计规范Code for anticorrosion design of industrial constructions〖GB50049-2011〗小型火力发电厂设计规范Code for design of small fossil fired power plant〖GB/T50050-2017〗工业循环冷却水处理设计规范〖GB50051-2013〗烟囱设计规范Code for design of chimneys〖GB50052-2009〗供配电系统设计规范Code for design electric power supply systems〖GB50053-2013〗20kV及以下变电所设计规范Code for design of 20KV and below substation〖GB50054-2011〗低压配电设计规范Code for design of low voltage electrical installations〖GB50055-2011〗通用用电设备配电设计规范Code for design of electric distribution of general-purpose utilization equipment〖GB50056-93〗电热设备电力装置设计规范Code for design of electrical equipment of electroheat installations〖GB50057-2010〗建筑物防雷设计规范Code for design protection of structures against lightning〖GB50058-2014〗爆炸危险环境电力装置设计规范Code for design of electrical installations in explosive atmospheres〖GB50059-2011〗35kV~110kV变电站设计规范Code for design of 35kV~110kV substation〖GB50060-2008〗3～110kV高压配电装置设计规范Code for design of 3~110kV high voltage electrical installations〖GB50061-2010〗66kV及以下架空电力线路设计规范Code for design of 66kV or under overhead electrical power transmission line〖GB/T50062-2008〗电力装置的继电保护和自动装置设计规范Code for design of relaying protection and automatic device of electric power installation〖GB/T50063-2017〗电力装置电测量仪表装置设计规范Code for design of electrical measuring device of power system〖GB/T50064-2014〗交流电气装置的过电压保护和绝缘配合设计规范Code for design of overvoltage protection and insulation coordination for AC electrical installations〖GB/T50065-2011〗交流电气装置的接地设计规范Code for design of ac electrical installations earthing〖GB50067-2014〗汽车库、修车库、停车场设计防火规范Code for fire protection design of garage,motor repair shop and parking area〖GB50068-2001〗建筑结构可靠度设计统一标准Unified standard for reliability design of building structures〖GB50069-2002〗给水排水工程构筑物结构设计规范Structural design code for special structures of water supply and waste water engineering〖GB50070-2009〗矿山电力设计规范Code for design of electric power in mine〖GB50071-2014〗小型水力发电站设计规范Design code for small hydropower station〖GB50072-2010〗冷库设计规范Code for design of cold store〖GB50073-2013〗洁净厂房设计规范Code for design of clean room〖GB50074-2014〗石油库设计规范Code for design of oil depot〖GB/T50076-2013〗室内混响时间测量规范Code for measurement of the reverberation time in rooms〖GB50077-2017〗钢筋混凝土筒仓设计标准〖GB50078-2008〗烟囱工程施工及验收规范Code for construction and acceptance of chimney works〖GB/T50080-2016〗普通混凝土拌合物性能试验方法标准Standard for test method of performance on ordinary fresh concrete〖GB/T50081-2002〗普通混凝土力学性能试验方法标准Standard for test method of mechanical properties of ordinary concrete〖GB/T50082-2009〗普通混凝土长期性能和耐久性能试验方法标准Standard for test methods of long-term performance and durability of ordinary concrete〖GB/T50083-2014〗工程结构设计基本术语标准Standard for general terms used in design of engineering structures〖GB50084-2017〗自动喷水灭火系统设计规范〖GB/T50085-2007〗喷灌工程技术规范Technical code for sprinkling engineering〖GB50086-2015〗岩土锚杆与喷射混凝土支护工程技术规范Technical code for engineering of ground anchorages and shotcrete support〖GB/T50087-2013〗工业企业噪声控制设计规范Code for design of noise control of industrial enterprises〖GB50089-2007〗民用爆破器材工程设计安全规范Safety code for design of engineering of civil expolosives materials〖GB50090-2006〗铁路线路设计规范Code for design of railway line〖GB50091-2006〗铁路车站及枢纽设计规范Code for design of railway stations and railway terminals〖GB50092-96〗沥青路面施工及验收规范Code for construction and acceptance of asphalt pavement〖GB50093-2013〗自动化仪表工程施工及质量验收规范Code for construction and quality acceptance of automation instrumentation engineering〖GB50094-2010〗球形储罐施工规范Code for construction of spherical tanks〖GB/T50095-2014〗水文基本术语和符号标准Standard for essential terminology and symbol in hydrology〖GB50096-2011〗住宅设计规范Design code for residential buildings〖GBJ97-87〗水泥混凝土路面施工及验收规范Code for construction and acceptance of cement concrete pavement〖GB50099-2011〗中小学校设计规范Code for design of school〖GB/T50102-2014〗工业循环水冷却设计规范Code for design of cooling for industrial recirculating water〖GB/T50103-2010〗总图制图标准Standard for general layout drawings〖GB/T50104-2010〗建筑制图标准Standard for architectural drawings〖GB/T50105-2010〗建筑结构制图标准Standard for structural drawings〖GB/T50106-2010〗建筑给水排水制图标准Standard for building water supply and drainage drawings〖GB/T50107-2010〗混凝土强度检验评定标准Standard for evaluation of concrete compressive strength〖GB50108-2008〗地下工程防水技术规范Technical code for waterproofing of underground works〖GB/T50109-2014〗工业用水软化除盐设计规范Design code for softening and demineralization of industrial water〖GBJ110-87〗卤代烷1211灭火系统设计规范Code for design of haton 1211 fire extinguishing systems〖GB50111-2006〗铁路工程抗震设计规范（2009年版）Code for seismic design of railway engineering〖GB50112-2013〗膨胀土地区建筑技术规范Technical code for buildings in expansive soil regions〖GB50113-2005〗滑动模板工程技术规范Technical code slipform engineering〖GB/T50114-2010〗暖通空调制图标准Standard for heating,ventilation and air conditioning drawings〖GB50115-2009〗工业电视系统工程设计规范Code for design of industrial television system〖GB50116-2013〗火灾自动报警系统设计规范Code for design of automatic fire alarm system〖GB50117-2014〗构筑物抗震鉴定标准Standard for seismic appraisal of special structures〖GB50118-2010〗民用建筑隔声设计规范Code for design of sound insulation of civil buildings〖GB50119-2013〗混凝土外加剂应用技术规范Code for concrete admixture application〖GB50121-2005〗建筑隔声评价标准Standard for assessment of building sound insulation〖GBJ122-88〗工业企业噪声测量规范Code for measurement of noise in industrial enterprises〖GB/T50123-1999〗土工试验方法标准Standard for test merhods of earthworks〖GBJ124-88〗道路工程术语标准Standard for terms used in road engineering〖GB/T50125-2010〗给水排水工程基本术语标准Standard for basic terms of water and wastewater engineering〖GB50126-2008〗工业设备及管道绝热工程施工规范Code for construction of industrial equipment and pipeline insulation engineering〖GB50127-2007〗架空索道工程技术规范Technical standard for aerial ropeway engineering〖GB50128-2014〗立式圆筒形钢制焊接储罐施工规范Code for construction of vertical cylindrical steel welded storage tanks〖GB/T50129-2011〗砌体基本力学性能试验方法标准Standard for test method of basic mechanics properties of masonry〖GBJ130-90〗钢筋混凝土升板结构技术规范Technical code for reinforced concrete lift-slab structure〖GB/T50132-2014〗工程结构设计通用符号标准Standard for general symbols used in design of engineering structures〖GB50135-2006〗高耸结构设计规范Code for design of high-rising structures〖GB50136-2011〗电镀废水治理设计规范Code for design of electroplating wastewater processing〖GB50137-2011〗城市用地分类与规划建设用地标准Code for classification of urban land use and planning standards of development land〖GB/T50138-2010〗水位观测标准Standard for stage observation〖GB50139-2014〗内河通航标准Navigation standard of inland waterway〖GB50140-2005〗建筑灭火器配置设计规范Code for design of extinguisher distribution in buildings〖GB50141-2008〗给水排水构筑物工程施工及验收规范Code for construction and acceptance of water and sewerage structures〖GBJ143-90〗架空电力线路、变电所对电视差转台、转播台无线电干扰防护间距标准Standard for protective spacing of radio interference from overhead electric lines,substations to television transposer station and retransmitting station〖GB50144-2008〗工业建筑可靠性鉴定标准Standard for reliability evaluation of industrial factory buildings〖GB/T50145-2007〗土的工程分类标准Standard for engineering classification of soil〖GB/T50146-2014〗粉煤灰混凝土应用技术规范Technical code for application of fly ash concrete〖GB50147-2010〗电气装置安装工程高压电器施工及验收规范Code for construction and acceptance of high-voltage electric equipment installation engineering〖GB50148-2010〗电气装置安装工程电力变压器、油浸电抗器、互感器施工及验收规范Code for construction and acceptance of power transformers oil reactor and mutual inductor〖GB50149-2010〗电气装置安装工程母线装置施工及验收规范Code for construction and acceptance of busbar installation of electric equipment installation engineering〖GB50150-2016〗电气装置安装工程电气设备交接试验标准Electric equipment installation engineeringstandard for hand-over test of electric equipment〖GB50151-2010〗泡沫灭火系统设计规范Code for design of foam extinguishing systems〖GB/T50152-2012〗混凝土结构试验方法标准Standard for test method of concrete structures〖GB50153-2008〗工程结构可靠性设计统一标准Unified standard for reliability design of engineering structures〖GB/T50155-2015〗供暖通风与空气调节术语标准Standard for terminology of heating,ventilation and air conditioning〖GB50156-2012〗汽车加油加气站设计与施工规范Code for design and construction of filling station〖GB50157-2013〗地铁设计规范Code for design of metro〖GB50158-2010〗港口工程结构可靠性设计统一标准Unified standard for reliability design of port engineering structures〖GB/T50159-2015〗河流悬移质泥沙测验规范Code for measurement of suspended load in open channels〖GB50160-2008〗石油化工企业设计防火规范Fire prevention code of petrochemical enterprise design〖GB50161-2009〗烟花爆竹工程设计安全规范Safety code for design of engineering of fireworks and firecracker〖GB50162-92〗道路工程制图标准Standard for road engineering drawing〖GB50163-92〗卤代烷1301灭火系统设计规范Code for design of halon 1301 fire extinguishing systems〖GB50164-2011〗混凝土质量控制标准Standard for quality control of concrete〖GB50165-92〗古建筑木结构维护与加固技术规范Technical code for maintenance and strengthing of ancient timber buildings〖GB50166-2007〗火灾自动报警系统施工及验收规范Code for installation and acceptance of fire alarm system〖GB50167-2014〗工程摄影测量规范Code for engineering photogrammetry〖GB50168-2006〗电气装置安装工程电缆线路施工及验收规范Erection works of electrical installations Code for construction and acceptance of cable levels〖GB50169-2016〗电气装置安装工程接地装置施工及验收规范Code for construction and acceptance of grounding connection electric equipment installation engineering〖GB50170-2006〗电气装置安装工程旋转电机施工及验收规范Erection works of electrical installations Code of construction and acceptance of rotating electrical machines〖GB50171-2012〗电气装置安装工程盘、柜及二次回路接线施工及验收规范Code for construction and acceptance of switchbord outfit complete cubicle and secondary circuit electric equipment installation engineering〖GB50172-2012〗电气装置安装工程蓄电池施工及验收规范Code for construction and acceptance of battery electric equipment installation engineering〖GB50173-2014〗电气装置安装工程66kV及以下架空电力线路施工及验收规范Code for construction and acceptance of 66KV and under overhead electric power transmission line〖GB50174-2017〗数据中心设计规范Code for design of data centers〖GB50175-2014〗露天煤矿工程质量验收规范Code for acceptance of surface coal mine engineering〖GB50176-2016〗民用建筑热工设计规范Code for thermal design of civil building〖GB50177-2005〗氢气站设计规范Code for design of hydrogen and oxygen stations〖GB50178-93〗建筑气候区划标准Standard for climatic regionalization for building and civil engineering〖GB50179-2015〗河流流量测验规范Code for liquid flow measurement in open channels〖GB50180-93〗城市居住区规划设计规范(2016年版)Code of urban residential areas planning & design〖GB50181-93〗蓄滞洪区建筑工程技术规范Technical code for constructional engineering in flood detention basin〖GB50183-2015〗石油天然气工程设计防火规范〖GB50184-2011〗工业金属管道工程施工质量验收规范Code for acceptance of construction quality of industrial metallic piping〖GB50185-2010〗工业设备及管道绝热工程施工质量验收规范Code for acceptance of construction quality of industrial equipment and pipeline insulation engineering〖GB/T50186-2013〗港口工程基本术语标准Standard for fundamental terms of port engineering〖GB50187-2012〗工业企业总平面设计规范Code for design of general layout of industrial enterprises〖GB50188-2007〗镇规划标准Standard for planning of town〖GB50189-2015〗公共建筑节能设计标准Design standard for energy efficiency of public buildings〖GB50190-93〗多层厂房楼盖抗微振设计规范Code for design of anti-microvibration of multistory factory floor〖GB50191-2012〗构筑物抗震设计规范Code for seismic design of special structures〖GB50193-93(2010年版)〗二氧化碳灭火系统设计规范Code for design of carbon dioxide fire extinguishing systems〖GB50194-2014〗建设工程施工现场供用电安全规范Code for safety of power supply and consumption for construction site〖GB50195-2013〗发生炉煤气站设计规范Design code for producer gas station〖GB50197-2015〗煤炭工业露天矿设计规范Code for design of open pit mine of coal industry〖GB50198-2011〗民用闭路监视电视系统工程技术规范Technical code for project of civil closed circuit monitoring television system〖GB50199-2013〗水利水电工程结构可靠性设计统一标准Unified standard for reliability design of hydraulic engineering structures〖GB50200-94〗有线电视系统工程技术规范Technical code for CATV system〖GB50201-2012〗土方与爆破工程施工及验收规范Code for construction and acceptance of earthwork and blasting engineering〖GB50201-2014〗防洪标准Standard for flood control〖GB50202-2002〗建筑地基基础工程施工质量验收规范Code for acceptance of construction quality of building foundation〖GB50203-2011〗砌体结构工程施工质量验收规范Code for acceptance of constructional quality of masonry structures〖GB50204-2015〗混凝土结构工程施工质量验收规范Code for quality acceptance of concrete structure construction〖GB50205-2001〗钢结构工程施工质量验收规范Code for acceptance of construction quality of steel structure〖GB50206-2012〗木结构工程施工质量验收规范Code for acceptanc of construction quality of timber structures〖GB50207-2012〗屋面工程质量验收规范Code for acceptance of construction quality of roof〖GB50208-2011〗地下防水工程质量验收规范Code for acceptance of construction quality of underground waterproof〖GB50209-2010〗建筑地面工程施工质量验收规范Code for acceptance of construction quality of building ground〖GB50210-2001〗建筑装饰装修工程质量验收规范Code for construction quality acceptance of building decoration〖GB50211-2014〗工业炉砌筑工程施工与验收规范Code for construction and acceptance of industrial furnaces building〖GB50212-2014〗建筑防腐蚀工程施工规范Code for construction of building anticorrosive engineering〖GB50213-2010〗煤矿井巷工程质量验收规范Code for acceptance of shaft sinking and drifting of coal mine〖GB/T50214-2013〗组合钢模板技术规范Technical code for composite steel-form〖GB50215-2015〗煤炭工业矿井设计规范Code for design of mine of coal industry〖GB50216-94〗铁路工程结构可靠度设计统一标准Unified standard for reliability design of railway engineering structures〖GB50217-2007〗电力工程电缆设计规范Code for design of cables of electric engineering〖GB/T50218-2014〗工程岩体分级标准Standard for engineering classification of rock mass〖GB50219-2014〗水喷雾灭火系统技术规范Technical code for water spray fire protection systems〖GB50220-95〗城市道路交通规划设计规范Code for planning design of transport on urban road〖GB50222-2017〗建筑内部装修设计防火规范〖GB50223-2008〗建筑工程抗震设防分类标准Standard for classification of seismic protection of buildings constructions〖GB50224-2010〗建筑防腐蚀工程施工质量验收规范Code for acceptance of construction quality of anticorrosive engineering of buildings〖GB50226-2007〗铁路旅客车站建筑设计规范(2011年版)Code for design of railway passenger station buildings〖GB50227-2017〗并联电容器装置设计规范Code for design of installation of shunt capacitors〖GB/T50228-2011〗工程测量基本术语标准Standard for foundational terminology of engineering survey〖GB50229-2006〗火力发电厂与变电站设计防火规范Code for design of fire protection for foossil fuel power plants and substations〖GB50231-2009〗机械设备安装工程施工及验收通用规范General code for construction and acceptance of mechanical equipment installation engineering〖GB50233-2014〗110kV~750kV架空输电线路施工及验收规范Code for construction and acceptance of 110kV~750kV overhead transmission line〖GB50235-2010〗工业金属管道工程施工规范Code for construction of industrial metallic piping engineering〖GB50236-2011〗现场设备、工业管道焊接工程施工规范Code for construction of field equipment,industrial pipe welding engineering〖GB50242-2002〗建筑给水排水及采暖工程施工质量验收规范〖GB50243-2016〗通风与空调工程施工质量验收规范Code of acceptance for construction quality of ventilation and air conditioning works〖GB50251-2015〗输气管道工程设计规范Code for design of gas transmission pipeline engineering〖GB50252-2010〗工业安装工程施工质量验收统一标准Unified standard for constructional quality acceptance of industrial installation engineering〖GB50253-2014〗输油管道工程设计规范Code for design of oil transportation pipeline engineering〖GB50254-2014〗电气装置安装工程低压电器施工及验收规范Code for construction and acceptance of low-voltage apparatus Electric equipment installation engineering〖GB50255-2014〗电气装置安装工程电力变流设备施工及验收规范Code for construction and acceptance of power conversion equipment electric equipment installation engineering〖GB50256-2014〗电气装置安装工程起重机电气装置施工及验收规范Code for construction and acceptance of electric device of crane electrical equipment installation engineering〖GB50257-2014〗电气装置安装工程爆炸和火灾危险环境电气装置施工及验收规范Code for construction and acceptance of electric equipment on fire and explosion hazard electrical equipment installation engineering〖GB50260-2013〗电力设施抗震设计规范Code for seismic design of electrical installations〖GB50261-2017〗自动喷水灭火系统施工及验收规范〖GB/T50262-2013〗铁路工程基本术语标准Standard for basic terms of railway engineering〖GB50263-2007〗气体灭火系统施工及验收规范Code for installation and acceptance of gas fire extinguishing systems〖GB50264-2013〗工业设备及管道绝热工程设计规范Code for design of industrial equipment and pipeline insulation engineering〖GB50265-2010〗泵站设计规范Design code for pumping station〖GB/T50266-2013〗工程岩体试验方法标准Standard for test methods of engineering rock mass〖GB50267-97〗核电厂抗震设计规范Code for seismic design of unclear power plants〖GB50268-2008〗给水排水管道工程施工及验收规范Code for construction and acceptance of water and sewerage pipeline works〖GB/T50269-2015〗地基动力特性测试规范Code for measurement methods of dynamic properties of subsoil〖GB50270-2010〗输送设备安装工程施工及验收规范Code for construction and acceptance of conveyor equipment installation engineering〖GB50271-2009〗金属切削机床安装工程施工及验收规范Code for construction and acceptance of metal-cutting machine installation engineering〖GB50272-2009〗锻压设备安装工程施工及验收规范Code for construction and acceptance of forging-press equipment installation engineering〖GB50273-2009〗锅炉安装工程施工及验收规范Code for construction and acceptance of boiler installation engineering〖GB50274-2010〗制冷设备、空气分离设备安装工程施工及验收规范Code for construction and acceptance of refrigeration plant and air seperation plant installation〖GB50275-2010〗风机、压缩机、泵安装工程施工及验收规范Code for construction and acceptance of fan,compressor and pump installation〖GB50276-2010〗破碎、粉磨设备安装工程施工及验收规范Code for construction and acceptance of crusher and grinding equipment installation engineering〖GB50277-2010〗铸造设备安装工程施工及验收规范Code for construction and acceptance of casting plant installation〖GB50278-2010〗起重设备安装工程施工及验收规范Code for construction and acceptance of crane installation engineering〖GB/T50279-2014〗岩土工程基本术语标准Standard for fundamental terms of geotechnical engineering〖GB/T50280-98〗城市规划基本术语标准Standard for basic terminology of urban planning〖GB50281-2006〗泡沫灭火系统施工及验收规范Code for construction and acceptance of foam fire extinguishing systems〖GB50282-2016〗城市给水工程规划规范Code for urban water supply engineering planning〖GB/T50283-1999〗公路工程结构可靠度设计统一标准Unified standard of reliability design of highway engineering structures〖GB50284-2008〗飞机库设计防火规范Code for fire protection design of aircraft hangar〖GB50285-98〗调幅收音台和调频电视转播台与公路的防护间距标准Standad for protection distance from highway to AM,FM and TV rebroadcast stations〖GB50286-2013〗堤防工程设计规范Code for design of levee project〖GB50287-2016〗水力发电工程地质勘察规范Code for hydropower engineering geological investigation〖GB50288-99〗灌溉与排水工程设计规范Code for design of irrigation and drainage〖GB50289-2016〗城市工程管线综合规划规范Code for urban engineering pipelines comprehensive planning〖GB/T50290-2014〗土工合成材料应用技术规范Technical code for application of geosynthetics〖GB/T50291-2015〗房地产估价规范Code for real estate appraisal〖GB50292-2015〗民用建筑可靠性鉴定标准Standard for appraisal of reliability of civil buildings〖GB/T50293-2014〗城市电力规划规范Code for planning of urban electric power〖GB/T50294-2014〗核电厂总平面及运输设计规范Design code for general plan and transportation of nuclear power plants〖GB50295-2016〗水泥工厂设计规范Code for design of cement plant〖GB50296-2014〗管井技术规范Technical code for tube well〖GB/T50297-2006〗电力工程基本术语标准Standard for basic terms of electric power engineering〖GB50298-1999〗风景名胜区规划规范Code for Scenic area Planning〖GB50299-1999〗地下铁道工程施工及验收规范Code for construction and acceptance of metro engineering〖GB50300-2013〗建筑工程施工质量验收统一标准Unified standard for constructional quality acceptance of building engineering〖GB50303-2015〗建筑电气工程施工质量验收规范Code for acceptance of construction quality of building electrical engineering〖GB50307-2012〗城市轨道交通岩土工程勘察规范Code for geotechnical investigations of urban rail transit〖GB/T50308-2017〗城市轨道交通工程测量规范〖GB50309-2017〗工业炉砌筑工程质量验收标准〖GB50310-2002〗电梯工程施工质量验收规范Code for acceptance of installation quality of lifts,escalators and passenger conveyors〖GB50311-2016〗综合布线系统工程设计规范Code for engineering design of generic cabling system〖GB/T50312-2016〗综合布线系统工程验收规范Code for engineering acceptance of generic cabling system〖GB50313-2013〗消防通信指挥系统设计规范Code for design of fire communication and command system〖GB50314-2015〗智能建筑设计标准Standard for design of intelligent building〖GB/T50315-2011〗砌体工程现场检测技术标准Technical standard for site testing of masonry engineering〖GB50316-2000〗工业金属管道设计规范（2008年版）Design code for industrial metallic piping〖GB50317-2009〗猪屠宰与分割车间设计规范Code for design of pig's slaughtering and cutting rooms〖GB50318-2017〗城市排水工程规划规范Code for urban wastewater and stormwater engineering planning〖GB/T50319-2013〗建设工程监理规范Code of construction project management〖GB50320-2014〗粮食平房仓设计规范Code for design of grain storehouses〖GB50322-2011〗粮食钢板筒仓设计规范Code for design of grain steel silos〖GB/T50323-2001〗城市建设档案著录规范Code for Urban Construction Archives Description〖GB50324-2014〗冻土工程地质勘察规范Code for engineering geological investigation of frozen ground〖GB50325-2010〗民用建筑工程室内环境污染控制规范(2013年版)Code for indoor environmental pollution control of civil building engineering〖GB/T50326-2017〗建设工程项目管理规范Code for construction project management〖GB50327-2001〗住宅装饰装修工程施工规范Code for construction of decoration of housings〖GB/T50328-2014〗建设工程文件归档规范Code for putting construction project documents into records〖GB/T50329-2012〗木结构试验方法标准Standard for test methods of timber structures〖GB50330-2013〗建筑边坡工程技术规范Technical code for building slope engineering〖GB/T50331-2002〗城市居民生活用水量标准The standard of water quantity for city's residential use〖GB50332-2002〗给水排水工程管道结构设计规范Structural design code for pipelines of water supply and waste water engineering〖GB50333-2013〗医院洁净手术部建筑技术规范Architectural technical code for hospital clean operating department〖GB50334-2017〗城镇污水处理厂工程质量验收规范Code for quality acceptance of municipal wastewater treatment plant engineering〖GB50335-2016〗城镇污水再生利用工程设计规范Code for design of municipal wastewater reclamation and reuse〖GB50336-2002〗建筑中水设计规范Code of design for building reclaimed water system〖GB50337-2003〗城市环境卫生设施规划规范Code for planning of urban environmental sanitation facilities〖GB50338-2003〗固定消防炮灭火系统设计规范Code of design for fixed fire monitor extinguishing systems〖GB50339-2013〗智能建筑工程质量验收规范Code for acceptance of quality of intelligent building systems〖GB50340-2016〗老年人居住建筑设计规范Code for design of residential building for the aged〖GB50341-2014〗立式圆筒形钢制焊接油罐设计规范Code for design of vertical cylindrical welded steel oil tanks〖GB50342-2003〗混凝土电视塔结构技术规范Technical code for concrete structure of TV tower〖GB50343-2012〗建筑物电子信息系统防雷技术规范Technical code for protection of building electronic information system against lightning〖GB50344-2004〗建筑结构检测技术标准Techical standard for inspection of building structure〖GB50345-2012〗屋面工程技术规范Technical code for roof engineering〖GB50346-2011〗生物安全实验室建筑技术规范Architectural and technical code for biosafety laboratories〖GB50347-2004〗干粉灭火系统设计规范Code of design for powder extinguishing systems〖GB50348-2004〗安全防范工程技术规范technical code for engineering of security and protection system〖GB50349-2015〗气田集输设计规范Code for design of gas gathering and transportation system in gas field〖GB50350-2015〗油田油气集输设计规范Code for design of oil-gas gathering and transportation systems of oilfield〖GB50351-2014〗储罐区防火堤设计规范Code for design of fire dike in storage tank farm〖GB50352-2005〗民用建筑设计通则Code for design of civil buildings〖GB/T50353-2013〗建筑工程建筑面积计算规范Calculation code for construction area of building〖GB50354-2005〗建筑内部装修防火施工及验收规范Code for fire prevention installation and acceptance〖GB/T50355-2005〗住宅建筑室内振动限值及其测量方法标准Standard of limit and measurement method of vibration in the room of residential buildings〖GB/T50356-2005〗剧场、电影院和多用途厅堂建筑声学设计规范Code for architectural acoustical design of theater,cinema and multi-use auditorium〖GB50357-2005〗历史文化名城保护规划规范Code of conservation planning for historic cities〖GB/T50358-2017〗建设项目工程总承包管理规范Code for management of engineering procuremrnt construction (EPC) projects〖GB50359-2016〗煤炭洗选工程设计规范Code for design of coal cleaning engineering〖GB50360-2016〗水煤浆工程设计规范Code for design coal water mixture engineering〖GB/T50361-2005〗木骨架组合墙体技术规范Technical code for partitions with timber frame wore〖GB/T50362-2005〗住宅性能评定技术标准Technical standard for performance assessment of residential buildings〖GB/T50363-2006〗节水灌溉工程技术规范Technical specification for water-saving irrigation engineering〖GB50364-2005〗民用建筑太阳能热水系统应用技术规范Technical code for solar water heating system of civil buildings〖GB50365-2005〗空调通风系统运行管理规范Code for operation and management of central air conditioning system〖GB50366-2005〗地源热泵系统工程技术规范（2009年版）Technical code for ground source heat pump system〖GB50367-2013〗混凝土结构加固设计规范Code for design of strengthening concrete structure〖GB50368-2005〗住宅建筑规范Residential building code〖GB50369-2014〗油气长输管道工程施工及验收规范Code for construction and acceptance of oil and gas long-distance transmission pipeline engineering〖GB50370-2005〗气体灭火系统设计规范Code for design of gas fire extinguishing systems〖GB50371-2006〗厅堂扩声系统设计规范Code for sound reinforcement system design of auditorium〖GB50372-2006〗炼铁机械设备工程安装验收规范Code for installation acceptance of metallurgical machinery ironmaking equipment engineering〖GB50373-2006〗通信管道与通道工程设计规范Design code for communication conduit and passage engineering〖GB50374-2006〗通信管道工程施工及验收规范Code of construction and acceptance for communication conduit engineering〖GB/T50375-2016〗建筑工程施工质量评价标准Evaluating standard for excellent quality of building engineering〖GB50376-2015〗橡胶工厂节能设计规范Design code for energy saving of rubber factory。
2017工程建设国家标准(全)
工程建设国家标准本栏目内容未经允许不得转载！〖GB/T50001-2017〗房屋建筑制图统一标准〖GB/T50002-2013〗建筑模数协调标准Standard for modular coordination of building〖GB50003-2011〗砌体结构设计规范Code for design of masonry structures〖GB50005-2017〗木结构设计规范〖GB/T50006-2010〗厂房建筑模数协调标准Standard for modular coordination of industrial buildings〖GB50007-2011〗建筑地基基础设计规范Code for design of building foundation〖GB50009-2012〗建筑结构荷载规范Load code for the design of building structures〖GB50010-2010(2015年版)〗混凝土结构设计规范(2015年版)Code for design of concrete structures〖GB50011-2010〗建筑抗震设计规范(2016年版)Code for seismic design of buildings〖GB50012-2012〗Ⅲ、Ⅳ级铁路设计规范Code for design of class Ⅲ、Ⅳ railway〖GB50013-2006〗室外给水设计规范Code for design of outdoor water supply engineering〖GB50014-2006〗室外排水设计规范(2016年版)Code for design of outdoor wastewater engineering〖GB50015-2003〗建筑给水排水设计规范（2009年版）Code for design of building water supply and drainage〖GB50016-2014〗建筑设计防火规范(整合)Code for fire protection design of buildings〖GB50017-2017〗钢结构设计标准〖GB50018-2002〗冷弯薄壁型钢结构技术规范Technical code for design of cold-formed thin-wall steel structures〖GB50019-2015〗工业建筑供暖通风与空气调节设计规范Design code for heating ventilation and air conditioning of industrial buildings〖GB50021-2001〗岩土工程勘察规范（2009年版）Code for investigation of geotechnical engineering〖GBJ22-87〗厂矿道路设计规范Code for design of roads in factories and mining areas〖GB50023-2009〗建筑抗震鉴定标准Standard for seismic appraisal of buildings〖GB50025-2004〗湿陷性黄土地区建筑规范Code for building construction in collapsible loess regions〖GB50026-2007〗工程测量规范Code for engineering surveying〖GB50027-2001〗供水水文地质勘察规范Standard for bydrogeological investigation of water-supply〖GB50028-2006〗城镇燃气设计规范Code for design of city gas engineering〖GB50029-2014〗压缩空气站设计规范Code for design of compressed air station〖GB50030-2013〗氧气站设计规范Code for design of oxygen station〖GB50032-2003〗室外给水排水和燃气热力工程抗震设计规范Code for earthquake - resistant design of outdoor water supply,sewerage,gas and heating engineering〖GB50033-2013〗建筑采光设计标准Standard for daylighting design of buildings〖GB50034-2013〗建筑照明设计标准Standard for lighting design of buildings〖GB50037-2013〗建筑地面设计规范Code for design of building ground〖GB50039-2010〗农村防火规范Code for fire protection and prevention of rural area〖GB50040-96〗动力机器基础设计规范Code for design of dynamic machine foundation〖GB50041-2008〗锅炉房设计规范Code for design of boiler plant〖GB50046-2008〗工业建筑防腐蚀设计规范Code for anticorrosion design of industrial constructions〖GB50049-2011〗小型火力发电厂设计规范Code for design of small fossil fired power plant〖GB/T50050-2017〗工业循环冷却水处理设计规范〖GB50051-2013〗烟囱设计规范Code for design of chimneys〖GB50052-2009〗供配电系统设计规范Code for design electric power supply systems〖GB50053-2013〗20kV及以下变电所设计规范Code for design of 20KV and below substation〖GB50054-2011〗低压配电设计规范Code for design of low voltage electrical installations〖GB50055-2011〗通用用电设备配电设计规范Code for design of electric distribution of general-purpose utilization equipment〖GB50056-93〗电热设备电力装置设计规范Code for design of electrical equipment of electroheat installations〖GB50057-2010〗建筑物防雷设计规范Code for design protection of structures against lightning〖GB50058-2014〗爆炸危险环境电力装置设计规范Code for design of electrical installations in explosive atmospheres〖GB50059-2011〗35kV~110kV变电站设计规范Code for design of 35kV~110kV substation〖GB50060-2008〗3～110kV高压配电装置设计规范Code for design of 3~110kV high voltage electrical installations〖GB50061-2010〗66kV及以下架空电力线路设计规范Code for design of 66kV or under overhead electrical power transmission line〖GB/T50062-2008〗电力装置的继电保护和自动装置设计规范Code for design of relaying protection and automatic device of electric power installation〖GB/T50063-2017〗电力装置电测量仪表装置设计规范Code for design of electrical measuring device of power system〖GB/T50064-2014〗交流电气装置的过电压保护和绝缘配合设计规范Code for design of overvoltage protection and insulation coordination for AC electrical installations〖GB/T50065-2011〗交流电气装置的接地设计规范Code for design of ac electrical installations earthing〖GB50067-2014〗汽车库、修车库、停车场设计防火规范Code for fire protection design of garage,motor repair shop and parking area〖GB50068-2001〗建筑结构可靠度设计统一标准Unified standard for reliability design of building structures〖GB50069-2002〗给水排水工程构筑物结构设计规范Structural design code for special structures of water supply and waste water engineering〖GB50070-2009〗矿山电力设计规范Code for design of electric power in mine〖GB50071-2014〗小型水力发电站设计规范Design code for small hydropower station〖GB50072-2010〗冷库设计规范Code for design of cold store〖GB50073-2013〗洁净厂房设计规范Code for design of clean room〖GB50074-2014〗石油库设计规范Code for design of oil depot〖GB/T50076-2013〗室内混响时间测量规范Code for measurement of the reverberation time in rooms〖GB50077-2017〗钢筋混凝土筒仓设计标准〖GB50078-2008〗烟囱工程施工及验收规范Code for construction and acceptance of chimney works〖GB/T50080-2016〗普通混凝土拌合物性能试验方法标准Standard for test method of performance on ordinary fresh concrete〖GB/T50081-2002〗普通混凝土力学性能试验方法标准Standard for test method of mechanical properties of ordinary concrete〖GB/T50082-2009〗普通混凝土长期性能和耐久性能试验方法标准Standard for test methods of long-term performance and durability of ordinary concrete〖GB/T50083-2014〗工程结构设计基本术语标准Standard for general terms used in design of engineering structures〖GB50084-2017〗自动喷水灭火系统设计规范〖GB/T50085-2007〗喷灌工程技术规范Technical code for sprinkling engineering〖GB50086-2015〗岩土锚杆与喷射混凝土支护工程技术规范Technical code for engineering of ground anchorages and shotcrete support〖GB/T50087-2013〗工业企业噪声控制设计规范Code for design of noise control of industrial enterprises〖GB50089-2007〗民用爆破器材工程设计安全规范Safety code for design of engineering of civil expolosives materials〖GB50090-2006〗铁路线路设计规范Code for design of railway line〖GB50091-2006〗铁路车站及枢纽设计规范Code for design of railway stations and railway terminals〖GB50092-96〗沥青路面施工及验收规范Code for construction and acceptance of asphalt pavement〖GB50093-2013〗自动化仪表工程施工及质量验收规范Code for construction and quality acceptance of automation instrumentation engineering〖GB50094-2010〗球形储罐施工规范Code for construction of spherical tanks〖GB/T50095-2014〗水文基本术语和符号标准Standard for essential terminology and symbol in hydrology〖GB50096-2011〗住宅设计规范Design code for residential buildings〖GBJ97-87〗水泥混凝土路面施工及验收规范Code for construction and acceptance of cement concrete pavement〖GB50099-2011〗中小学校设计规范Code for design of school〖GB/T50102-2014〗工业循环水冷却设计规范Code for design of cooling for industrial recirculating water〖GB/T50103-2010〗总图制图标准Standard for general layout drawings〖GB/T50104-2010〗建筑制图标准Standard for architectural drawings〖GB/T50105-2010〗建筑结构制图标准Standard for structural drawings〖GB/T50106-2010〗建筑给水排水制图标准Standard for building water supply and drainage drawings〖GB/T50107-2010〗混凝土强度检验评定标准Standard for evaluation of concrete compressive strength〖GB50108-2008〗地下工程防水技术规范Technical code for waterproofing of underground works〖GB/T50109-2014〗工业用水软化除盐设计规范Design code for softening and demineralization of industrial water〖GBJ110-87〗卤代烷1211灭火系统设计规范Code for design of haton 1211 fire extinguishing systems〖GB50111-2006〗铁路工程抗震设计规范（2009年版）Code for seismic design of railway engineering〖GB50112-2013〗膨胀土地区建筑技术规范Technical code for buildings in expansive soil regions〖GB50113-2005〗滑动模板工程技术规范Technical code slipform engineering〖GB/T50114-2010〗暖通空调制图标准Standard for heating,ventilation and air conditioning drawings〖GB50115-2009〗工业电视系统工程设计规范Code for design of industrial television system〖GB50116-2013〗火灾自动报警系统设计规范Code for design of automatic fire alarm system〖GB50117-2014〗构筑物抗震鉴定标准Standard for seismic appraisal of special structures〖GB50118-2010〗民用建筑隔声设计规范Code for design of sound insulation of civil buildings〖GB50119-2013〗混凝土外加剂应用技术规范Code for concrete admixture application〖GB50121-2005〗建筑隔声评价标准Standard for assessment of building sound insulation〖GBJ122-88〗工业企业噪声测量规范Code for measurement of noise in industrial enterprises〖GB/T50123-1999〗土工试验方法标准Standard for test merhods of earthworks〖GBJ124-88〗道路工程术语标准Standard for terms used in road engineering〖GB/T50125-2010〗给水排水工程基本术语标准Standard for basic terms of water and wastewater engineering〖GB50126-2008〗工业设备及管道绝热工程施工规范Code for construction of industrial equipment and pipeline insulation engineering〖GB50127-2007〗架空索道工程技术规范Technical standard for aerial ropeway engineering〖GB50128-2014〗立式圆筒形钢制焊接储罐施工规范Code for construction of vertical cylindrical steel welded storage tanks〖GB/T50129-2011〗砌体基本力学性能试验方法标准Standard for test method of basic mechanics properties of masonry〖GBJ130-90〗钢筋混凝土升板结构技术规范Technical code for reinforced concrete lift-slab structure〖GB/T50132-2014〗工程结构设计通用符号标准Standard for general symbols used in design of engineering structures〖GB50135-2006〗高耸结构设计规范Code for design of high-rising structures〖GB50136-2011〗电镀废水治理设计规范Code for design of electroplating wastewater processing〖GB50137-2011〗城市用地分类与规划建设用地标准Code for classification of urban land use and planning standards of development land〖GB/T50138-2010〗水位观测标准Standard for stage observation〖GB50139-2014〗内河通航标准Navigation standard of inland waterway〖GB50140-2005〗建筑灭火器配置设计规范Code for design of extinguisher distribution in buildings〖GB50141-2008〗给水排水构筑物工程施工及验收规范Code for construction and acceptance of water and sewerage structures〖GBJ143-90〗架空电力线路、变电所对电视差转台、转播台无线电干扰防护间距标准Standard for protective spacing of radio interference from overhead electric lines,substations to television transposer station and retransmitting station〖GB50144-2008〗工业建筑可靠性鉴定标准Standard for reliability evaluation of industrial factory buildings〖GB/T50145-2007〗土的工程分类标准Standard for engineering classification of soil〖GB/T50146-2014〗粉煤灰混凝土应用技术规范Technical code for application of fly ash concrete〖GB50147-2010〗电气装置安装工程高压电器施工及验收规范Code for construction and acceptance of high-voltage electric equipment installation engineering〖GB50148-2010〗电气装置安装工程电力变压器、油浸电抗器、互感器施工及验收规范Code for construction and acceptance of power transformers oil reactor and mutual inductor〖GB50149-2010〗电气装置安装工程母线装置施工及验收规范Code for construction and acceptance of busbar installation of electric equipment installation engineering〖GB50150-2016〗电气装置安装工程电气设备交接试验标准Electric equipment installation engineeringstandard for hand-over test of electric equipment〖GB50151-2010〗泡沫灭火系统设计规范Code for design of foam extinguishing systems〖GB/T50152-2012〗混凝土结构试验方法标准Standard for test method of concrete structures〖GB50153-2008〗工程结构可靠性设计统一标准Unified standard for reliability design of engineering structures〖GB/T50155-2015〗供暖通风与空气调节术语标准Standard for terminology of heating,ventilation and air conditioning〖GB50156-2012〗汽车加油加气站设计与施工规范Code for design and construction of filling station〖GB50157-2013〗地铁设计规范Code for design of metro〖GB50158-2010〗港口工程结构可靠性设计统一标准Unified standard for reliability design of port engineering structures〖GB/T50159-2015〗河流悬移质泥沙测验规范Code for measurement of suspended load in open channels〖GB50160-2008〗石油化工企业设计防火规范Fire prevention code of petrochemical enterprise design〖GB50161-2009〗烟花爆竹工程设计安全规范Safety code for design of engineering of fireworks and firecracker〖GB50162-92〗道路工程制图标准Standard for road engineering drawing〖GB50163-92〗卤代烷1301灭火系统设计规范Code for design of halon 1301 fire extinguishing systems〖GB50164-2011〗混凝土质量控制标准Standard for quality control of concrete〖GB50165-92〗古建筑木结构维护与加固技术规范Technical code for maintenance and strengthing of ancient timber buildings〖GB50166-2007〗火灾自动报警系统施工及验收规范Code for installation and acceptance of fire alarm system〖GB50167-2014〗工程摄影测量规范Code for engineering photogrammetry〖GB50168-2006〗电气装置安装工程电缆线路施工及验收规范Erection works of electrical installations Code for construction and acceptance of cable levels〖GB50169-2016〗电气装置安装工程接地装置施工及验收规范Code for construction and acceptance of grounding connection electric equipment installation engineering〖GB50170-2006〗电气装置安装工程旋转电机施工及验收规范Erection works of electrical installations Code of construction and acceptance of rotating electrical machines〖GB50171-2012〗电气装置安装工程盘、柜及二次回路接线施工及验收规范Code for construction and acceptance of switchbord outfit complete cubicle and secondary circuit electric equipment installation engineering〖GB50172-2012〗电气装置安装工程蓄电池施工及验收规范Code for construction and acceptance of battery electric equipment installation engineering〖GB50173-2014〗电气装置安装工程66kV及以下架空电力线路施工及验收规范Code for construction and acceptance of 66KV and under overhead electric power transmission line〖GB50174-2017〗数据中心设计规范Code for design of data centers〖GB50175-2014〗露天煤矿工程质量验收规范Code for acceptance of surface coal mine engineering〖GB50176-2016〗民用建筑热工设计规范Code for thermal design of civil building〖GB50177-2005〗氢气站设计规范Code for design of hydrogen and oxygen stations〖GB50178-93〗建筑气候区划标准Standard for climatic regionalization for building and civil engineering〖GB50179-2015〗河流流量测验规范Code for liquid flow measurement in open channels〖GB50180-93〗城市居住区规划设计规范(2016年版)Code of urban residential areas planning & design〖GB50181-93〗蓄滞洪区建筑工程技术规范Technical code for constructional engineering in flood detention basin〖GB50183-2015〗石油天然气工程设计防火规范〖GB50184-2011〗工业金属管道工程施工质量验收规范Code for acceptance of construction quality of industrial metallic piping〖GB50185-2010〗工业设备及管道绝热工程施工质量验收规范Code for acceptance of construction quality of industrial equipment and pipeline insulation engineering〖GB/T50186-2013〗港口工程基本术语标准Standard for fundamental terms of port engineering〖GB50187-2012〗工业企业总平面设计规范Code for design of general layout of industrial enterprises〖GB50188-2007〗镇规划标准Standard for planning of town〖GB50189-2015〗公共建筑节能设计标准Design standard for energy efficiency of public buildings〖GB50190-93〗多层厂房楼盖抗微振设计规范Code for design of anti-microvibration of multistory factory floor〖GB50191-2012〗构筑物抗震设计规范Code for seismic design of special structures〖GB50193-93(2010年版)〗二氧化碳灭火系统设计规范Code for design of carbon dioxide fire extinguishing systems〖GB50194-2014〗建设工程施工现场供用电安全规范Code for safety of power supply and consumption for construction site〖GB50195-2013〗发生炉煤气站设计规范Design code for producer gas station〖GB50197-2015〗煤炭工业露天矿设计规范Code for design of open pit mine of coal industry〖GB50198-2011〗民用闭路监视电视系统工程技术规范Technical code for project of civil closed circuit monitoring television system〖GB50199-2013〗水利水电工程结构可靠性设计统一标准Unified standard for reliability design of hydraulic engineering structures〖GB50200-94〗有线电视系统工程技术规范Technical code for CATV system〖GB50201-2012〗土方与爆破工程施工及验收规范Code for construction and acceptance of earthwork and blasting engineering〖GB50201-2014〗防洪标准Standard for flood control〖GB50202-2002〗建筑地基基础工程施工质量验收规范Code for acceptance of construction quality of building foundation〖GB50203-2011〗砌体结构工程施工质量验收规范Code for acceptance of constructional quality of masonry structures〖GB50204-2015〗混凝土结构工程施工质量验收规范Code for quality acceptance of concrete structure construction〖GB50205-2001〗钢结构工程施工质量验收规范Code for acceptance of construction quality of steel structure〖GB50206-2012〗木结构工程施工质量验收规范Code for acceptanc of construction quality of timber structures〖GB50207-2012〗屋面工程质量验收规范Code for acceptance of construction quality of roof〖GB50208-2011〗地下防水工程质量验收规范Code for acceptance of construction quality of underground waterproof〖GB50209-2010〗建筑地面工程施工质量验收规范Code for acceptance of construction quality of building ground〖GB50210-2001〗建筑装饰装修工程质量验收规范Code for construction quality acceptance of building decoration〖GB50211-2014〗工业炉砌筑工程施工与验收规范Code for construction and acceptance of industrial furnaces building〖GB50212-2014〗建筑防腐蚀工程施工规范Code for construction of building anticorrosive engineering〖GB50213-2010〗煤矿井巷工程质量验收规范Code for acceptance of shaft sinking and drifting of coal mine〖GB/T50214-2013〗组合钢模板技术规范Technical code for composite steel-form〖GB50215-2015〗煤炭工业矿井设计规范Code for design of mine of coal industry〖GB50216-94〗铁路工程结构可靠度设计统一标准Unified standard for reliability design of railway engineering structures〖GB50217-2007〗电力工程电缆设计规范Code for design of cables of electric engineering〖GB/T50218-2014〗工程岩体分级标准Standard for engineering classification of rock mass〖GB50219-2014〗水喷雾灭火系统技术规范Technical code for water spray fire protection systems〖GB50220-95〗城市道路交通规划设计规范Code for planning design of transport on urban road〖GB50222-2017〗建筑内部装修设计防火规范〖GB50223-2008〗建筑工程抗震设防分类标准Standard for classification of seismic protection of buildings constructions〖GB50224-2010〗建筑防腐蚀工程施工质量验收规范Code for acceptance of construction quality of anticorrosive engineering of buildings〖GB50226-2007〗铁路旅客车站建筑设计规范(2011年版)Code for design of railway passenger station buildings〖GB50227-2017〗并联电容器装置设计规范Code for design of installation of shunt capacitors〖GB/T50228-2011〗工程测量基本术语标准Standard for foundational terminology of engineering survey〖GB50229-2006〗火力发电厂与变电站设计防火规范Code for design of fire protection for foossil fuel power plants and substations〖GB50231-2009〗机械设备安装工程施工及验收通用规范General code for construction and acceptance of mechanical equipment installation engineering〖GB50233-2014〗110kV~750kV架空输电线路施工及验收规范Code for construction and acceptance of 110kV~750kV overhead transmission line〖GB50235-2010〗工业金属管道工程施工规范Code for construction of industrial metallic piping engineering〖GB50236-2011〗现场设备、工业管道焊接工程施工规范Code for construction of field equipment,industrial pipe welding engineering〖GB50242-2002〗建筑给水排水及采暖工程施工质量验收规范〖GB50243-2016〗通风与空调工程施工质量验收规范Code of acceptance for construction quality of ventilation and air conditioning works〖GB50251-2015〗输气管道工程设计规范Code for design of gas transmission pipeline engineering〖GB50252-2010〗工业安装工程施工质量验收统一标准Unified standard for constructional quality acceptance of industrial installation engineering〖GB50253-2014〗输油管道工程设计规范Code for design of oil transportation pipeline engineering〖GB50254-2014〗电气装置安装工程低压电器施工及验收规范Code for construction and acceptance of low-voltage apparatus Electric equipment installation engineering〖GB50255-2014〗电气装置安装工程电力变流设备施工及验收规范Code for construction and acceptance of power conversion equipment electric equipment installation engineering〖GB50256-2014〗电气装置安装工程起重机电气装置施工及验收规范Code for construction and acceptance of electric device of crane electrical equipment installation engineering〖GB50257-2014〗电气装置安装工程爆炸和火灾危险环境电气装置施工及验收规范Code for construction and acceptance of electric equipment on fire and explosion hazard electrical equipment installation engineering〖GB50260-2013〗电力设施抗震设计规范Code for seismic design of electrical installations〖GB50261-2017〗自动喷水灭火系统施工及验收规范〖GB/T50262-2013〗铁路工程基本术语标准Standard for basic terms of railway engineering〖GB50263-2007〗气体灭火系统施工及验收规范Code for installation and acceptance of gas fire extinguishing systems〖GB50264-2013〗工业设备及管道绝热工程设计规范Code for design of industrial equipment and pipeline insulation engineering〖GB50265-2010〗泵站设计规范Design code for pumping station〖GB/T50266-2013〗工程岩体试验方法标准Standard for test methods of engineering rock mass〖GB50267-97〗核电厂抗震设计规范Code for seismic design of unclear power plants〖GB50268-2008〗给水排水管道工程施工及验收规范Code for construction and acceptance of water and sewerage pipeline works〖GB/T50269-2015〗地基动力特性测试规范Code for measurement methods of dynamic properties of subsoil〖GB50270-2010〗输送设备安装工程施工及验收规范Code for construction and acceptance of conveyor equipment installation engineering〖GB50271-2009〗金属切削机床安装工程施工及验收规范Code for construction and acceptance of metal-cutting machine installation engineering〖GB50272-2009〗锻压设备安装工程施工及验收规范Code for construction and acceptance of forging-press equipment installation engineering〖GB50273-2009〗锅炉安装工程施工及验收规范Code for construction and acceptance of boiler installation engineering〖GB50274-2010〗制冷设备、空气分离设备安装工程施工及验收规范Code for construction and acceptance of refrigeration plant and air seperation plant installation〖GB50275-2010〗风机、压缩机、泵安装工程施工及验收规范Code for construction and acceptance of fan,compressor and pump installation〖GB50276-2010〗破碎、粉磨设备安装工程施工及验收规范Code for construction and acceptance of crusher and grinding equipment installation engineering〖GB50277-2010〗铸造设备安装工程施工及验收规范Code for construction and acceptance of casting plant installation〖GB50278-2010〗起重设备安装工程施工及验收规范Code for construction and acceptance of crane installation engineering〖GB/T50279-2014〗岩土工程基本术语标准Standard for fundamental terms of geotechnical engineering〖GB/T50280-98〗城市规划基本术语标准Standard for basic terminology of urban planning〖GB50281-2006〗泡沫灭火系统施工及验收规范Code for construction and acceptance of foam fire extinguishing systems〖GB50282-2016〗城市给水工程规划规范Code for urban water supply engineering planning〖GB/T50283-1999〗公路工程结构可靠度设计统一标准Unified standard of reliability design of highway engineering structures〖GB50284-2008〗飞机库设计防火规范Code for fire protection design of aircraft hangar〖GB50285-98〗调幅收音台和调频电视转播台与公路的防护间距标准Standad for protection distance from highway to AM,FM and TV rebroadcast stations〖GB50286-2013〗堤防工程设计规范Code for design of levee project〖GB50287-2016〗水力发电工程地质勘察规范Code for hydropower engineering geological investigation〖GB50288-99〗灌溉与排水工程设计规范Code for design of irrigation and drainage〖GB50289-2016〗城市工程管线综合规划规范Code for urban engineering pipelines comprehensive planning〖GB/T50290-2014〗土工合成材料应用技术规范Technical code for application of geosynthetics〖GB/T50291-2015〗房地产估价规范Code for real estate appraisal〖GB50292-2015〗民用建筑可靠性鉴定标准Standard for appraisal of reliability of civil buildings〖GB/T50293-2014〗城市电力规划规范Code for planning of urban electric power〖GB/T50294-2014〗核电厂总平面及运输设计规范Design code for general plan and transportation of nuclear power plants〖GB50295-2016〗水泥工厂设计规范Code for design of cement plant〖GB50296-2014〗管井技术规范Technical code for tube well〖GB/T50297-2006〗电力工程基本术语标准Standard for basic terms of electric power engineering〖GB50298-1999〗风景名胜区规划规范Code for Scenic area Planning〖GB50299-1999〗地下铁道工程施工及验收规范Code for construction and acceptance of metro engineering〖GB50300-2013〗建筑工程施工质量验收统一标准Unified standard for constructional quality acceptance of building engineering〖GB50303-2015〗建筑电气工程施工质量验收规范Code for acceptance of construction quality of building electrical engineering〖GB50307-2012〗城市轨道交通岩土工程勘察规范Code for geotechnical investigations of urban rail transit〖GB/T50308-2017〗城市轨道交通工程测量规范〖GB50309-2017〗工业炉砌筑工程质量验收标准〖GB50310-2002〗电梯工程施工质量验收规范Code for acceptance of installation quality of lifts,escalators and passenger conveyors〖GB50311-2016〗综合布线系统工程设计规范Code for engineering design of generic cabling system〖GB/T50312-2016〗综合布线系统工程验收规范Code for engineering acceptance of generic cabling system〖GB50313-2013〗消防通信指挥系统设计规范Code for design of fire communication and command system〖GB50314-2015〗智能建筑设计标准Standard for design of intelligent building〖GB/T50315-2011〗砌体工程现场检测技术标准Technical standard for site testing of masonry engineering〖GB50316-2000〗工业金属管道设计规范（2008年版）Design code for industrial metallic piping〖GB50317-2009〗猪屠宰与分割车间设计规范Code for design of pig's slaughtering and cutting rooms〖GB50318-2017〗城市排水工程规划规范Code for urban wastewater and stormwater engineering planning〖GB/T50319-2013〗建设工程监理规范Code of construction project management〖GB50320-2014〗粮食平房仓设计规范Code for design of grain storehouses〖GB50322-2011〗粮食钢板筒仓设计规范Code for design of grain steel silos〖GB/T50323-2001〗城市建设档案著录规范Code for Urban Construction Archives Description〖GB50324-2014〗冻土工程地质勘察规范Code for engineering geological investigation of frozen ground〖GB50325-2010〗民用建筑工程室内环境污染控制规范(2013年版)Code for indoor environmental pollution control of civil building engineering〖GB/T50326-2017〗建设工程项目管理规范Code for construction project management〖GB50327-2001〗住宅装饰装修工程施工规范Code for construction of decoration of housings〖GB/T50328-2014〗建设工程文件归档规范Code for putting construction project documents into records〖GB/T50329-2012〗木结构试验方法标准Standard for test methods of timber structures〖GB50330-2013〗建筑边坡工程技术规范Technical code for building slope engineering〖GB/T50331-2002〗城市居民生活用水量标准The standard of water quantity for city's residential use〖GB50332-2002〗给水排水工程管道结构设计规范Structural design code for pipelines of water supply and waste water engineering〖GB50333-2013〗医院洁净手术部建筑技术规范Architectural technical code for hospital clean operating department〖GB50334-2017〗城镇污水处理厂工程质量验收规范Code for quality acceptance of municipal wastewater treatment plant engineering〖GB50335-2016〗城镇污水再生利用工程设计规范Code for design of municipal wastewater reclamation and reuse〖GB50336-2002〗建筑中水设计规范Code of design for building reclaimed water system〖GB50337-2003〗城市环境卫生设施规划规范Code for planning of urban environmental sanitation facilities〖GB50338-2003〗固定消防炮灭火系统设计规范Code of design for fixed fire monitor extinguishing systems〖GB50339-2013〗智能建筑工程质量验收规范Code for acceptance of quality of intelligent building systems〖GB50340-2016〗老年人居住建筑设计规范Code for design of residential building for the aged〖GB50341-2014〗立式圆筒形钢制焊接油罐设计规范Code for design of vertical cylindrical welded steel oil tanks〖GB50342-2003〗混凝土电视塔结构技术规范Technical code for concrete structure of TV tower〖GB50343-2012〗建筑物电子信息系统防雷技术规范Technical code for protection of building electronic information system against lightning〖GB50344-2004〗建筑结构检测技术标准Techical standard for inspection of building structure〖GB50345-2012〗屋面工程技术规范Technical code for roof engineering〖GB50346-2011〗生物安全实验室建筑技术规范Architectural and technical code for biosafety laboratories〖GB50347-2004〗干粉灭火系统设计规范Code of design for powder extinguishing systems〖GB50348-2004〗安全防范工程技术规范technical code for engineering of security and protection system〖GB50349-2015〗气田集输设计规范Code for design of gas gathering and transportation system in gas field〖GB50350-2015〗油田油气集输设计规范Code for design of oil-gas gathering and transportation systems of oilfield〖GB50351-2014〗储罐区防火堤设计规范Code for design of fire dike in storage tank farm〖GB50352-2005〗民用建筑设计通则Code for design of civil buildings〖GB/T50353-2013〗建筑工程建筑面积计算规范Calculation code for construction area of building〖GB50354-2005〗建筑内部装修防火施工及验收规范Code for fire prevention installation and acceptance〖GB/T50355-2005〗住宅建筑室内振动限值及其测量方法标准Standard of limit and measurement method of vibration in the room of residential buildings〖GB/T50356-2005〗剧场、电影院和多用途厅堂建筑声学设计规范Code for architectural acoustical design of theater,cinema and multi-use auditorium〖GB50357-2005〗历史文化名城保护规划规范Code of conservation planning for historic cities〖GB/T50358-2017〗建设项目工程总承包管理规范Code for management of engineering procuremrnt construction (EPC) projects〖GB50359-2016〗煤炭洗选工程设计规范Code for design of coal cleaning engineering〖GB50360-2016〗水煤浆工程设计规范Code for design coal water mixture engineering〖GB/T50361-2005〗木骨架组合墙体技术规范Technical code for partitions with timber frame wore〖GB/T50362-2005〗住宅性能评定技术标准Technical standard for performance assessment of residential buildings〖GB/T50363-2006〗节水灌溉工程技术规范Technical specification for water-saving irrigation engineering〖GB50364-2005〗民用建筑太阳能热水系统应用技术规范Technical code for solar water heating system of civil buildings〖GB50365-2005〗空调通风系统运行管理规范Code for operation and management of central air conditioning system〖GB50366-2005〗地源热泵系统工程技术规范（2009年版）Technical code for ground source heat pump system〖GB50367-2013〗混凝土结构加固设计规范Code for design of strengthening concrete structure〖GB50368-2005〗住宅建筑规范Residential building code〖GB50369-2014〗油气长输管道工程施工及验收规范Code for construction and acceptance of oil and gas long-distance transmission pipeline engineering〖GB50370-2005〗气体灭火系统设计规范Code for design of gas fire extinguishing systems〖GB50371-2006〗厅堂扩声系统设计规范Code for sound reinforcement system design of auditorium〖GB50372-2006〗炼铁机械设备工程安装验收规范Code for installation acceptance of metallurgical machinery ironmaking equipment engineering〖GB50373-2006〗通信管道与通道工程设计规范Design code for communication conduit and passage engineering〖GB50374-2006〗通信管道工程施工及验收规范Code of construction and acceptance for communication conduit engineering〖GB/T50375-2016〗建筑工程施工质量评价标准Evaluating standard for excellent quality of building engineering〖GB50376-2015〗橡胶工厂节能设计规范Design code for energy saving of rubber factory。
海康威视威视IP网络摄像头用户手册说明书
Pneumatics Fluid & Gas Handling Hydraulics Process Control Sealing & Shielding Key Products Accumulators Cartridge valves Electrohydraulic actuators Human machine interfaces Hybrid drives Hydraulic cylindersHydraulic motors & pumps Hydraulic systems Hydraulic valves & controls Hydrostatic steering Integrated hydraulic circuits Power take-offs Power units Key Markets Aerospace Conveyor & material handling Factory automation Life science & medical Machine tools Packaging machinery T ransportation & automotive Key Products Air preparation Brass fittings & valves Manifolds Pneumatic accessories Pneumatic actuators & grippers Pneumatic valves & controls Quick disconnects Rotary actuators Rubber & thermoplastic hose & couplings Structural extrusions Thermoplastic tubing & fittings Vacuum generators,cups & sensors Key Markets Aerial lift Agriculture Bulk chemical handling Construction machinery Food & beverage Fuel & gas delivery Industrial machinery Life sciences Marine Mining Mobile Oil & gas Renewable energy T ransportation Key Products Check valves Connectors for low pressure fluid conveyance Deep sea umbilicals Diagnostic equipment Hose couplings Industrial hose Mooring systems &power cables PTFE hose & tubing Quick couplings Rubber & thermoplastic hose T ube fittings & adapters Key Markets Aerial lift Agriculture Alternative energy Construction machinery Forestry Industrial machinery Machine tools Marine Material handling Mining Oil & gas Power generation Refuse vehicles Renewable energy T ruck hydraulics T urf equipmentKey Markets Alternative fuels Biopharmaceuticals Chemical & refining Food & beverage Marine & shipbuilding Medical & dental Microelectronics Nuclear Power Offshore oil exploration Oil & gas Pharmaceuticals Power generation Pulp & paper Steel Water/wastewater Key Products Analytical Instruments Analytical sample conditioning products & systems Chemical injection fittings & valves Fluoropolymer chemical delivery fittings,valves & pumps High purity gas delivery fittings,valves,regulators & digital flow controllers Industrial mass flow meters/controllers Permanent no-weld tube fittings Precision industrial regulators Key Markets Aerospace Chemical processing Consumer Fluid power General industrial Information technology Life sciences Microelectronics Military Oil & gas Power generation Renewable energy T elecommunications T ransportation Key Products Dynamic seals Elastomeric o-rings Electro-medical instrument design & assembly EMI shielding Extruded & precision-cut,fabricated elastomeric seals High temperature metal seals Homogeneous & inserted elastomeric shapes Medical device fabrication & assembly Metal & plastic retainedAerospace Key Markets Aftermarket services Commercial transports Engines General & business aviation Helicopters Launch vehicles Military aircraft Missiles Power generation Regional transports Unmanned aerial vehicles Key Products Control systems & actuation products Engine systems & components Fluid conveyance systems & components Fluid metering, delivery & atomization devices Fuel systems & components Fuel tank inserting systems Hydraulic systems & components Thermal management Wheels & brakes Electromechanical Key Markets Aerospace Factory automation Life science & medical Machine tools Packaging machinery Paper machinery Plastics machinery & converting Primary metals Semiconductor & electronics T extile Wire & cable Key Products AC/DC drives & systems Electric actuators, gantry robots & slides Electrohydrostatic actuation systems Electromechanical actuation systems Human machine interface Linear motors Stepper motors,servo motors,drives & controlsStructural extrusions Parker’s Motion & Control TechnologiesAt Parker, we’re guidedby a relentless drive tohelp our customersbecome moreproductive and achievehigher levels ofprofitability byengineering thebest systems for theirrequirements. It meanslooking at customerapplications frommany angles to findnew ways to createvalue. What ever themotion and controltechnology need,Parker has theexperience, breadthof product and global reach to consistentlydeliver. No companyknows more about motionand control technologythan Parker. For further infocall 1 800 C-Parker(180****7537)Climate Control Key Markets Agriculture Air conditioning Construction Machinery Food & beverage Industrial machinery Life sciences Oil & gas Precision cooling Process Refrigeration T ransportation Key Products Accumulators Advanced actuators Co controls Electronic controllers Filter driers Hand shut-off valves Heat exchangers Hose & fittings Pressure regulating valves Refrigerant distributors Safety relief valves Smart pumps Solenoid valves Thermostatic expansion valves Filtration Key Markets Aerospace Food & beverage Industrial plant & equipment Life sciences Marine Mobile equipment Oil & gas Power generation & renewable energy Process T ransportation Water Purification Key Products Analytical gas generators Compressed air filters & dryers Engine air, coollant, fuel & oil filtration system Fluid condition monitoring systems Hydraulic & lubrication filters Hydrogen,nitrogen & zero air generators Instrumentation filters Membrane & fiber filters Micro filtration Sterile air filtration Water desalination & purification filters & systemsViking LiteDirectional control valves The Viking Lite valve range is robust, versatile and combines high performance with compact installation dimensions. Large flow capacity, short change-over times and low change-over pressure are important characteristics of this valve range.Designed to operate with pressures up to 10 bar intemperatures -10C to + 50C.Zinc plated Viking Lite ...cover screwsrobust, versatile high performance with long service lifeViking Lite rangeP2LAZ, G1/8 - Cv = 0,6P2LBZ, G1/4 - Cv = 1,5P2LCZ, G3/8 - Cv = 2,5Solenoid operatedWear compensating systemThe Viking Lite valve range is robust, versatile and combines high performance with compact installation dimensions. The choice of G1/8, G14 or G3/8 port sizes provide large flow capacity, short change-over times. Low change-over pressure is also an important characteristic of this valve range.Viking Lite valves are fitted with dynamic bi-directional spool seals suitable for pressures up to 10 bar, inO O ambient temperatures -10C to + 50C. Under pressure radial expansion of the seal occurs to maintain sealing contact with the valve bore.This sealing method reduces friction gives lower pilotpressures, providing fast response and less wear. Valves do not require lubrication in operation but they can also be installed in systems that are lubricated.IP65 and RoHSPort sizes & port types (BSP , NPT , 1/8, 1/4, 3/8)Directional control valvesSolenoid operated directional control valvesInternal supply to solenoid valve(s) via port 1.5/2 valves, internal air, standard temperature3/2 valves, internal air, standard temperature(bar) actua./return 5/3 valves, internal air, standard temperatureSymb ol Size ActuationMinChangeover Weight Order code Order code Operating time (ms) Kg Without coil With 24V DC Pressure at 6 bar @20C (22mm coil)Symb olSizeActuationReturnMinChangeover Weight Order code Order code Operating time (ms) Kg Without coil With 24V DC Pressure at 6 bar @20C (22mm coil)(bar) actua./returnSymb ol Size ActuationReturnMinChangeover Weight Order code Order codeOperating time (ms) Kg Without coil With 24V DC Pressure at 6 bar @20C (22mm coil)(bar) actua./return Viking LiteMPS-V32N-PGMPS-V32N-PCCatalog 0802-5FeaturesMounting Bracket MPS-ACCK1 Included withSensors.Pressure SensorsMPS-322-Color Panel MountMPS-32RedFeaturesVacuum Pressure...............0to -30inHg Positive Pressure.................0to 145PSI2 NPNor PNP Open CollectorTransistor Output, 30VDC, 125mA Optional Analog Output, 4 to 20mA Optional Analog Output, 1 to5VDCMode(mmHg, -bar, -kPa, inHg)(kgf/cm 2,PSI,bar,kPa)MillisecondsOrdering Information,SpecificationsPressure SensorsMPS-322-Color Panel Mount SpecificationsPressure RangeVacuum(V)Positive(P)Units of Measure Display Resolution (with unit-switching function)bar:kPa:mmHg:inHg:0.0010.110.1bar:MPa:kgf/cm 2:PSI:0.010.0010.011ProofPressure-101 to 0kPa0 to 1MPaMediaAir & Non-Corrosive Gases PressurePort (N) 1/8" NPSF OperatingTemperature 32 to 122°F (0 to 50°C)StorageTemperature 14 to140°F (-10 to60°C)Humidity35 to 85% RHElectrical Connection (C) 4-Pin, M8 Connector, (G) Grommet Open LeadPowerSupply12 to 24VDC +10% or less, Ripple(Vp-p) 10% orless Display 3 + 1/2 Digit, 2 Color, 7-SegmentLED DisplayRefresh.1 to3.0 Seconds, Variable (Factoryset at0.1)Control Output NPN (Sinking), PNP (Sourcing),OpenCollector, max 125mA, 2Output Switch OutputOutput Signal, NPN or PNP , NormallyOpen orClosed,LEDIndicatorOutput Modes Hysteresis or WindowComparator Response Time2ms or less,(Variable 32, 128, 1024ms)Repeatability± 0.2% of F .S.± 1digit or less± 03% of F .S. ± 1 digit or lessAnalogOutputVoltageOutput 1 to 5VDC (1 + 0.04V , 5 + 0.04V); Outout Impedance 1kΩ; Linearity 0.5% of F .S.;Response Time 2ms or lessCurrent Output4 to 20mA; Linearity ±0.5% of F .S. or less; Maximum Load Impedance 300Ωwith Power Supply Voltage of 12V; 600Ω with Power Supply Voltage of 12V;Minimum Load Impedance50ΩThermal Error32 to 122°F (0 to 50°C) 25°C (77°C) + 2% of F .S. or less at range of 32 to 122°F (0 to50°C)GeneralProtection IP50, CE Marked, EMC-EN61000-6-2: 2001CurrentConsumption <80mA Vibration Resistance 10to 150Hz,Double Amplitude 1.5mm,XYZ,2hrs.Shock Resistance 10G,XYZMaterialHousing:ABS (gray),Pressure Port:Zinc Die-cast,Diaphragm:Silicone Mass1.7oz.(45g)(Not including cable)MPS-32Ordering NumbersPressure RangePort SizeOutputCircuit Electrical ConnectorPartNumber 0to -30inHg1/8 NPSF*PNPSourcing4 Pin,M8MPS-V32N-PC 2M LeadWire MPS-V32N-PG NPN Sinking4Pin, M8MPS-V32N-NC 2MLead Wire MPS-V32N-NG 0to 145PSI1/8NPSF*PNPSourcing4 Pin, M8MPS-P32N-PC 2M Lead Wire MPS-P32N-PG NPNSinking4Pin, M8MPS-P32N-NC 2MLeadWire MPS-P32N-NG PNP Sourcing with4-20ma4 Pin,M8MPS-P32N-PCI*Mounting BracketIncluded(Bold Items are Most Popular)Products for Automotive IndustryNBH/PBH/LE2 - Introduction• N BH allows for increased power similar to that achieved using hydraulics • Convert air pressure to high oil pressure using a booster• Patent Pending• High output from 0.15 4.5tons• Adjust air pressure using air regulator• Accurate force using oil pressure• Typical flow – manual ~ pneumatic ~ hydraulic or electric• NBH – Uses direct air pressure – high output and speed, uses consitent air pressure, used for short stroke.• PBH – Uses an accumulator – for long strokeHigh Power SystemsPneumerlock Clamping Element• P ressure booster combined with clamp cylindersenables high output of 1.5 to 44.1kN.• E ither direct-pressure or preload-pressureboosters can be selected to provide a wide range ofmotions of actuator from short to long.SpecificationOutput oil pressure : 10.8~17.5 MPaOperating air pressure: 0.2~1 MPaOutput oil capacity : 77~304 cm3Direct Pressure Type BoosterNBH seriesDirect pressure type booster configurationSuitable for operations requiring highoutput throughout the stroke.SpecificationPre-Pressure Type Booster PBH, PBE SeriesExample of circuit for referenceSuitable for operations requiring highoutput throughout the stroke.Locating pin cylinderRigid mounting blocks and tight rod tolerance give the accurate position of locating pins on welding jigs.Wide variety of actuator shapes on customer’srequests.Pin clamp cylinderLocating pins are equipped to cylinders.Both vertical and horizontal shape with many different diameters/ shapes of locating pins oncustomer’s requests. Clamp UnclampVertical typeHorizontal typeJig lifting cylinderRigid lift cylinder which gives theaccurate clamping positions to the clamp units.On lift & carry conveyance or multi product lines, usuallyinstalled on the base welding machines.10F-1/2Flat shape cylinder with thin width bodies 20mm for bore 25mm 25mm for bore 32mm 39mm for bore 50mmNon rotating with oval pistonSpecificationPressure: 0.1 to 1MPa O Temperature: -10 to +60 C Bore: 25/ 32/ 50mm Standard stroke: 50-200mm 10F-1 5-50mm 10F-2FlangeDescription Type Order code P1C-4NMBFlangeMF1/MF2Water retract actuator (WRA-series)Note: For reliable operation of WRA, air pressure has to exceed water pressure, pressure difference recommended 1 barFoot bracketDescription Type Order code P1C-4NMFFoot bracketMS1Water retract actuator (WRA-series)Water retract actuator designed to reduce water pressure during automatic tip change operation• Based on standard components, utilizing Parker P1P global actuator series, VikingLite valve technology, sealing, hose and fitting technologies • Reduces downtime• Protection of expensive weld equipment, automatic tip changer • Easy installation, easily integrated into existing water system • Corrosive protection against cooling water medium • Cost effective design• Optimized design to fit car manufacturer specifications,new program or retooling programWater retract actuator (Order code)Pneumatic Actuator Air Motor- TAM4 : Compact, economical air motor with grease mounted system <Specifications>Nominal output : 9.81-19.6 kNOperating pressure range : 0.15-0.7MPaRadial Piston Type Air MotorTAM4 seriesPneumatic ActuatorHigh-Power System- All in one construction combining pressure booster and clamp cylinder - Compact, Lightweight design<Specifications>Port size : G1/8, G1/4Operating air pressure range : 0.15-0.9MPa at air pressure as 0.6 MPaClamping Element LE2 seriesPneumatic Actuator High-Power System- Space-saving pneumatic press- 1/10 The volume of conventional presses<Specifications>Rated pressure : 0.5MPaMaximum output : 73.5-228W Torque : 0.64-2.91 NmPneumatic Toggle PressTPH series。
设备报验制度
设备报验制度实施导则1.目的为做到现场所用设备均符合安全要求，并做到所用设备安全可控，同时杜绝不合格或手续不全的设备进入现场使用，加强了针对设备的安全管理，规范设备进场的流程。
2.范围适用于各级单位设备报验制度的策划、实施、监督和检查。
3.定义设备报验制度是指各级单位在设备入场时有关报验的制度要求，设备必须将相关报验材料报送审核部门并经审核部门验证合格后才可进行入场使用。
4.管理要求4.1.设备报验制度编制要求设备报验制度需参照《特种设备安全监察条例》及《建筑机械使用安全技术规程》等相关国家法规进行编制。
设备报验制度需满足集团相关程序要求。
4.2.设备报验制度适用范围要求各公司参照国家法规及集团公司相关程序确定需进行报验的设备范围。
一般需要执行报验制度的设备范围为：大、中型施工机械及设备、特种设备、单位要求的其他施工机械、设备、工机具等。
4.3.报验内容要求4.3.1.报验起重机械、设备时，必须由报验单位填写《起重机械/工具验收核查表》（附件一），并提供相应报验材料，报验材料内容至少包括（不限于）以下内容： 吊车安装方案铭牌产品合格证生产厂家资质证明操作/安全手册承包商自检验收记录正面照片和侧面照片质量技术检验合格报告起重机安装施工日志起重机安装人员清单及资质安全施工交底记录机动车年度检验合格证负荷试验记录或厂家相关保证基础或轨道验收记录租赁双方安全协议4.3.2.各单位报验其它施工机械、设备时，必须由报验单位填写《施工机械/设备验收核查表》（附件二），并同时提交报验材料，报验材料内容包括（不限于）以下内容：出厂合格证检验报告检验合格标志年检记录标定记录其他须有的证书设备安全操作手册/说明书设备本体状况检查及记录设备正面照片和侧面照片其他需要的内容4.4.设备报验制度其他要求完成报验手续的施工机械、设备离开后重新入场施工的，所属单位须对设备进行自检，自检合格后报相关审核单位复查，复查合格后方可作业。
船舶常用术语名称(重要)
皮大衣fur overcoat
雨衣rain coat
安全帽safety helmet / hard cap
舷梯安全网gangway net
安全带safety belt
太阳镜sun glasses
护眼镜goggles
帆布手套canvas gloves
线手套cotton gloves
The ... Office of the Register of Shipping of PRC
sallon boy
cabin boy
supernumerary
ship's complement船上的定员
印巴语：
deck / engine room serang
deck / engine room tindal
seacunny舵工
bhandary厨师
topass清洁工
scullion助厨
杂项
1.证书
救生服exposure suit
保温袋
反光带reflective tape
救生衣灯
防火救生绳
呼吸器氧气瓶compressed oxygen bottle
电台物料
硫酸sulphuric aid
蒸馏水distilled water
单胶线single cord wire
老虎钳hand plier
奶子榔头ball peen hammer
Quarantine Office
Animal and Plant Quarantine Service
China Commodity Inspection and Testing Bureau (CCITB)