iATKOS的ML2指南
NVIDIA FlexIO MLNX-15-060566 _v1.5.1 指南说明书
Sample GuideTable of ContentsChapter 1. Introduction (1)Chapter 2. Dependencies (2)Chapter 3. Prerequisites (3)Chapter 4. Running the Sample (4)Chapter 5. Samples (5)5.1. FlexIO RPC (5)Chapter 1.IntroductionNVIDIA® BlueField®-3 DPU features a high-speed hardware data path accelerator (DPA). This allows accelerating critical data path flow.This document describes FlexIO samples based on the FlexIO SDK. These samples illustrate how to use the FlexIO API to configure and execute code on the DPA.For more information about FlexIO driver, refer to NVIDIA DOCA FlexIO SDK Programming Guide.Chapter 2.Dependencies BlueField-3 DPU is required to run the samples.Chapter 3.Prerequisites N/AChapter 4.Running the Sample1.Refer to the following documents:‣NVIDIA DOCA Installation Guide for Linux for details on how to install BlueField-related software.‣NVIDIA DOCA Troubleshooting Guide for any issue you may encounter with the installation, compilation, or execution of DOCA samples.2.To build a given sample:cd /opt/mellanox/doca/samples/<library_name>/<sample_name>meson buildninja -C buildNote: The binary flexio_<sample_name> will be created under ./build/.3.Sample (e.g., flexio_rpc) usage:Usage: flexio_rpc [DOCA Flags]DOCA Flags:-h, --help Print a help synopsis-v, --version Print program version information-l, --log-level Set the log level for the program <CRITICAL=20, ERROR=30, WARNING=40, INFO=50, DEBUG=60>For additional information per sample, use the -h option:./build/flexio_<sample_name> -hChapter 5.Samples5.1. FlexIO RPCThis sample illustrates how to invoke a function on the DPA.The sample logic include:1.Creating FlexIO process.2.Calling the remote function flexio_rpc_calculate_sum on the DPA.3.Printing return value to the standard output.References:‣/opt/mellanox/doca/samples/flexio/flexio_rpc/device/flexio_rpc_device.c ‣/opt/mellanox/doca/samples/flexio/flexio_rpc/host/flexio_rpc_sample.c ‣/opt/mellanox/doca/samples/flexio/flexio_rpc/host/meson.build‣/opt/mellanox/doca/samples/flexio/flexio_rpc/flexio_rpc_main.c‣/opt/mellanox/doca/samples/flexio/flexio_rpc/meson.buildNoticeThis document is provided for information purposes only and shall not be regarded as a warranty of a certain functionality, condition, or quality of a product. NVIDIA Corporation nor any of its direct or indirect subsidiaries and affiliates (collectively: “NVIDIA”) make no representations or warranties, expressed or implied, as to the accuracy or completeness of the information contained in this document and assume no responsibility for any errors contained herein. NVIDIA shall have no liability for the consequences or use of such information or for any infringement of patents or other rights of third parties that may result from its use. This document is not a commitment to develop, release, or deliver any Material (defined below), code, or functionality.NVIDIA reserves the right to make corrections, modifications, enhancements, improvements, and any other changes to this document, at any time without notice. Customer should obtain the latest relevant information before placing orders and should verify that such information is current and complete.NVIDIA products are sold subject to the NVIDIA standard terms and conditions of sale supplied at the time of order acknowledgement, unless otherwise agreed in an individual sales agreement signed by authorized representatives of NVIDIA and customer (“Terms of Sale”). NVIDIA hereby expressly objects to applying any customer general terms and conditions with regards to the purchase of the NVIDIA product referenced in this document. No contractual obligations are formed either directly or indirectly by this document.NVIDIA products are not designed, authorized, or warranted to be suitable for use in medical, military, aircraft, space, or life support equipment, nor in applications where failure or malfunction of the NVIDIA product can reasonably be expected to result in personal injury, death, or property or environmental damage. NVIDIA accepts no liability for inclusion and/or use of NVIDIA products in such equipment or applications and therefore such inclusion and/or use is at customer’s own risk. NVIDIA makes no representation or warranty that products based on this document will be suitable for any specified use. Testing of all parameters of each product is not necessarily performed by NVIDIA. It is customer’s sole responsibility to evaluate and determine the applicability of any information contained in this document, ensure the product is suitable and fit for the application planned by customer, and perform the necessary testing for the application in order to avoid a default of the application or the product. Weaknesses in customer’s product designs may affect the quality and reliability of the NVIDIA product and may result in additional or different conditions and/or requirements beyond those contained in this document. NVIDIA accepts no liability related to any default, damage, costs, or problem which may be based on or attributable to: (i) the use of the NVIDIA product in any manner that is contrary to this document or (ii) customer product designs.No license, either expressed or implied, is granted under any NVIDIA patent right, copyright, or other NVIDIA intellectual property right under this document. Information published by NVIDIA regarding third-party products or services does not constitute a license from NVIDIA to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property rights of the third party, or a license from NVIDIA under the patents or other intellectual property rights of NVIDIA.Reproduction of information in this document is permissible only if approved in advance by NVIDIA in writing, reproduced without alteration and in full compliance with all applicable export laws and regulations, and accompanied by all associated conditions, limitations, and notices.THIS DOCUMENT AND ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL NVIDIA BE LIABLE FOR ANY DAMAGES, INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF ANY USE OF THIS DOCUMENT, EVEN IF NVIDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Notwithstanding any damages that customer might incur for any reason whatsoever, NVIDIA’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms of Sale for the product.TrademarksNVIDIA, the NVIDIA logo, and Mellanox are trademarks and/or registered trademarks of Mellanox Technologies Ltd. and/or NVIDIA Corporation in the U.S. and in other countries. The registered trademark Linux® is used pursuant to a sublicense from the Linux Foundation, the exclusive licensee of Linus Torvalds, owner of the mark on a world¬wide basis. Other company and product names may be trademarks of the respective companies with which they are associated.Copyright© 2022 NVIDIA Corporation & affiliates. All rights reserved.NVIDIA Corporation | 2788 San Tomas Expressway, Santa Clara, CA 95051。
CRT指南课件
• Conditions for which there is evidence and/or general agreement that a procedure/treatment is not useful/fective and in some cases may be harmful
ACC/AHA/NASPE 2002 Indications for Cardiac Resynchronization Therapy
Class IIa Indication for Permanent Pacing in Idiopathic Dilated Cardiomyopathy
• Biventricular pacing in medically refractory, symptomatic NYHA Class III/IV patients with idiopathic dilated or ischemic cardiomyopathy, prolonged QRS interval (130 msec,), LV end diastolic diameter 55mm, and LVEF 35% (Level of Evidence A)
ACC/AHA/NASPE 2002 Updated Guidelines for Implantation of Cardiac Pacemakers and Antiarrhythmia Devices
ACC/AHA Classification Clinical Evidence
Level of Evidence Classification: • Level A: Data derived from multiple randomized clinical trials involving a large number of individuals • Level B: Data derived from a limited number of trials involving comparatively small numbers of patients or from well-designed data analysis of nonrandomized studies or observational data registries • Level C: Consensus of expert opinion was the primary source of recommendation
Autork执行器IK,IKM系列使用说明书
AUTORK CO电动执行器IK / IKM 系列 安装与使用手册请阅读和理解本手册A U TOR K CO 设定器可按现场要求对执行器的控制、定。
所有的执行器在投入使用前，有必要检查其与过的兼容性。
请阅读本手册。
当AU TO R KCO工作人员或指定代理商按照合同规时，执行器组态的相关文件应让客户留档备查。
指示、保护功能进行设程控制系统要求定进行现场调试和验收A U T ORKCO I k系列执行器- 推出无需打开电气端盖即可进行调本手册提供如下介绍：* 手动和电动(就地和远程)操作。
* 执行器的准备和安装。
* 根据有关阀门正确操作的要求，对执行器进行初级设定。
* 根据现场具体控制和指示的要求，对执行器进行二级设定。
* 维护- 故障排除。
试和查询使用所提危险区域控制和指接通和断标准诊断断，并通按一下设进行监视内置的数根据需要的阀门执行器。
供的红外线设定器进入执行器的设定程序，即使在，也可安全、快捷地对力矩值、限位以及其它所有示功能进行设定。
的设定和调整在执行器主电源开时均可完成。
功能可对控制系统、阀门和执行器的状态进行诊过执行器的显示屏上的图标和帮助屏幕来显示。
定器的按键即可在显示屏上对相应阀位的瞬时力矩。
据记录器可获取操作和阀门力矩数据，可提醒用户对阀门进行维护。
运行于P C机的IK -M o ni tor软件和/* 销售和服务。
或A UT OR K CO本安型通讯器可访问数据记录器，可对执行器的所有功能进行组态和记录。
执行器是否带有设定器，可根据接线端子箱盖上的黄色标签来识别。
有关A UT O RK CO I k和其它系列执行器的资料，可浏览我们的网站ww w. a ut ork . c om .cn。
目录1 健康与安全页码25 执行器的安装5.1 提升杆式阀顶部安装门-1 0117.6 检查方式157.7 程序路径分支- 16分支点( Cr)2 保存3 Ik系列执行器的操作3. 1 手动操作3. 2 电动操作3. 3 执行器的显示-就地指示333345.2 带齿轮箱的侧面安装5.3 非提升杆式顶部安装5.4 手轮密封5.5 I KM调节型阀门- 11阀门- 1111执行器117.8 执行器的显示16设定/ 检查方式7.9 返回阀位指示8 设定-初级设定功能16173. 4 执行器的显示- 5 5.6 I KML线性推力装置11 初级设定功能目录18报警指示4 准备驱动轴套75 . 7 I K M L线性行程的6 接线调整11129 设定-二级设定功能274. 1 IK 10至I K3 5 7A和Z型推力底座4. 2 IK 10至I K3 5 7B型非推力底座4. 3 IK 40至I K9 5 8A和Z型推力底座4. 4 IK 40至I K9 5 96 .1 地线的连接6 .2 电缆入口6 .3 端子的接线7 设定7 .1 设定程序7 .2 设定器7 .3 进入设定程序12121213131415二级设定功能目录1 0 维护和故障排除10.1 帮助显示11 重量和尺寸二进制、十六进制、十进制27424 45051B型非推力底座7 .4 设定方式- 口令7 .5 新口令1 1515换算表只有经过培训的、有经验的、必须使用BSEN 61010(用于测本手册是为让用户能够胜任对AUTORKC O Ik系列执行器的安装、操作、调试及检查而出版的。
图尔克 TBEN-L5-16DXP 以太网多协议 I O 模块 用户手册说明书
3:20+02:00紧凑的以太网多协议 I/O 模块16个通用数字通道，可配置为PNP输入或2 A输出TBEN-L5-16DXP型号TBEN-L5-16DXP 货号6814088系统数据供电电源24 VDC 允许范围18…30 VDC最大总电流，每个电压组最大9 A 总电流V1 + V2最大11 A连接供电电压5针公头7/8”接插件X1工作电流V1: max. 150 mA 传感器/执行器供电端口 C0-C3 由 V1 供电短路证明， 每端口 120 mA 传感器/执行器供电端口 C4-C7 由 V2 供电短路证明， 每端口 120 mA 电气隔离电压组V1和V2电隔离，电压最高500 VAC 典型功率损耗ð 10 W系统数据现场总线传输速率10/100 Mbps 现场总线连接技术2 × M12，4针，D型诊断协议自动网络服务器默认：192.168.1.254服务接口通过P1或P2连接以太网BEEP功能支持字段逻辑控制器(FLC)ARGEE固件版本 3.2.9.0ARGEE工程版本 2.0.24.0Modbus TCP 地址静态IP，DHCP支持功能代码FC1, FC2, FC3, FC4, FC5, FC6, FC15, FC16, FC23TCP连接的数量8输入登记起始地址0 (0x0000 hex)输出登记起始地址2048 (0x0800 hex)■PROFINET设备、EtherNet/IP设备或Modbus TCP主站/从站■集成式以太网交换机■支持10 Mbps/100 Mbps■2个M12 4针D型以太网现场总线接头■PROFINET S2系统冗余■增强型玻璃光纤外皮■冲击和振动测试■全密封模块电子元件■防护等级IP65、IP67、IP69K ■7/8"公头接插件，用于连接电源，5针■电隔离电压组■ATEX危险2/22区■每个输入端口都具有输出诊断功能■每路输出最大2 A■每个通道都具有输出诊断功能■每端口有两个可随意选择的数字通道■可编程ARGEE3:20+02:00EtherNet/IP 地址符合EtherNet/IP规范快插（QC）< 150 ms 设备级环（DLR)支持3级连接 (TCP)31级连接 (TCP)10输入配置实例101输出配置实例102配置配置实例106PROFINET 版本 2.35地址DCP 一致性分类 B (RT)最小周期时间 1 ms 快速启动（FSU)< 150 ms诊断依据PROFINET报警处理拓扑检测支持自动分配地址支持介质冗余协议（MRP）支持系统冗余S2网络负载等级3数字量输入通道数16Connectivity inputs M12，5针输入类型PNP 输入诊断类型组诊断开关阈值EN 61131-2 分类3, PNP 低电平信号电压< 5 V 高电平信号电压> 11 V 低电平信号电流< 1.5 mA 高电平信号电流> 2 mA 输入延迟 2.5 ms电气隔离与现场总线之间电隔离最高可耐500 VDC的电压数字量输出通道数16Connectivity outputs M12，5针输出类型PNP 诊断通道诊断输出电压24 VDC，来自电势组通道输出电流 2.0 A, 短路保护， 每端口最大 2.0 A 继电器输出 1.3 ms负载类型EN 60947-5-1:DC-13短路保护是电气隔离与现场总线之间电隔离最高可耐500 VDC的电压3:20+02:00标准 / 指令合规性振动测试符合EN 60068-2-6标准加速度最大20 g冲击测试符合 EN 60068-2-27认证滑落和翻倒符合EN 60068-2-31/EN 60068-2-32电磁兼容性符合EN 61131-2标准认证和证书CE，FCC，FM I类，2区，抗紫外线符合DIN EN ISO 4892-2A (2013)标准UL认证cULus LISTED 21 W2, Encl.Type 1 IND.CONT.EQ.有关ATEX/IECEx的注释必须遵守包含有关在爆炸危险2区和22区中使用的信息的快速入门指南。
rstpm2：简单指南说明书
rstpm2:a simple guideMark ClementsKarolinska InstitutetAbstractThis vignette provides a simple guide toflexible parametric models provided by rstpm2. Keywords:survival,splines.1.IntroductionThe rstpm2package supportsflexible parametric survival models to model time-to-event data. These models are fully parametric for the survival function.These models are particularly useful for:•Estimating predictions for hazards,hazard differences,hazard ratios,survival,survival differences and survival ratios,restricted mean survival•Estimating marginal predictions,including standardised survival and standardised sur-vival differences•Modelling time-varying effects,including time-varying hazards ratios.This guide is intended to provide an accessible guide to some of the models and predictions provided byflexible parametric survival models.This guide can then be followed by the other vignette,which provides a more complete mathematical presentation.For this guide,we describe the most commonflexible parametric survival model,which is a proportional hazards model.Let the survival function S(t♣x)=Pr(T>t♣x)for random variable T at time t and covariates x=(x j)be modelled byS(t♣x)=exp−exps(log(t);γ)+ jβj x jfor some parametric smooth function s(u;γ),for parametersγandβ,and for j being an index over the covariates.For this model,we use a smooth function to model the baseline log cumulative hazard function and include a linear predictor to model the covariates.To see that this is a proportional hazards model,we can see that the cumulative hazard and hazard functions are,respectively,H(t♣x)=−log(S(t♣x))=exps(log(t);γ)+ jβj x jh(t♣x)=dd tH(t♣x)=exps(log(t);γ)+ jβj x j×d s(log(t);γ)d t2rstpm2:a simple guideNow,for two sets of covariates x1=(x1j)and x2=(x2j),we have the hazard ratioh(t♣x2) h(t♣x1)=exp(s(log(t);γ)+ jβj x2j)×d s(log(t);γ)d t exp(s(log(t);γ)+ jβj x1j)×d s(log(t);γ)d t =expjβj(x2j−x1j)If the covariates only vary by one for the j th covariate,such that x2j=x1j+1and x2j′=x1j′for j′=j,then the hazard ratio is equal to exp(βj)for all t and for all values of the other covariates.We can motivate this model as an extension of exponential(or Poisson)regression.If we assume that the rates are constant over time and proportional with respect to covariates,then we have an exponential distribution with a hazard h(t♣x)=exp(γ0+ jβj x j)for log baseline hazard γ0,with a survival function S(t♣x)=exp(−exp(γ0+log(t)+ jβj x j)).Theflexible parametric survival models generalise the functionγ0+log(t)to some smooth function s(log(t);γ).The default smoother provided by rstpm2::stpm2is a natural spline,such thats(log(t);γ)=Kk=1B k(log(t))γkwhere B k(log(t))is a natural spline basis with K degrees of freedom.Natural splines have the property that the function is cubic between internal knots(fixed points that default to quantiles of the event times)and linear outside of the knot boundaries,with continuous derivatives at the knots.Heuristically,splines provide aflexible functional form that looks“nice”.The basis can be defined in several ways(ing a truncated power basis as used in Stata),while we use the approach used by the splines::ns function,which uses a matrix projection of the second derivatives at the knot boundaries.Wefit this model using maximum likelihood estimation for right censored and left truncated data.Variance estimation assumes that the parameters are asymptotically normal,with vari-able for predictions calculated using the multivariate delta method.2.An exampleWe begin with some simple proportional hazard models using the brcancer dataset.Wefirstfit a Cox regression with a single indicator for whether an a breast cancer patient was randomised to hormonal treatment.From the output,we see that hormonal treatment is associated with improved survival(HR=0.69,95%CI:0.54,0.89).>library(survival)>library(rstpm2)>brcancer<-transform(brcancer,recyear=rectime/365.24)>fit.cox<-coxph(Surv(recyear,censrec==1)~hormon,data=brcancer)>summary(fit.cox)Call:coxph(formula=Surv(recyear,censrec==1)~hormon,data=brcancer)n=686,number of events=299Mark Clements3 coef exp(coef)se(coef)z Pr(>|z|)hormon-0.36400.69490.1250-2.9110.0036**---Signif.codes:0‘***’0.001‘**’0.01‘*’0.05‘.’0.1‘’1exp(coef)exp(-coef)lower.95upper.95hormon0.6949 1.4390.54380.8879Concordance=0.543(se=0.014)Likelihood ratio test=8.82on1df,p=0.003Wald test=8.47on1df,p=0.004Score(logrank)test=8.57on1df,p=0.003We canfit aflexible parametric survival model with rstpm2::stpm2using very similar syntax, with an additional argument df=4to specify four degrees of freedom for the baseline smoother (typical values for the degrees of freedom are2–6).From the output,the model parameters include an intercept term,time-invariant log-hazard ratios,and parameters for the baseline smoother.The hazard ratio for hormonal treatment is0.69(95%CI:0.56,0.84),which is a similar point estimate and a more narrow confidence interval than Cox regression.>fit<-stpm2(Surv(recyear,censrec==1)~hormon,data=brcancer,df=4)>summary(fit)Maximum likelihood estimationCall:stpm2(formula=Surv(recyear,censrec==1)~hormon,data=brcancer, df=4)Coefficients:Estimate Std.Error z value Pr(z)(Intercept)-6.797730.72642-9.3578<2.2e-16***hormon-0.364060.12491-2.91440.003563**nsx(log(recyear),df=4)1 5.699950.716777.95231.830e-15***nsx(log(recyear),df=4)2 4.856140.4800210.1166<2.2e-16***nsx(log(recyear),df=4)310.13327 1.412677.17317.331e-13***nsx(log(recyear),df=4)4 4.706260.3301614.2545<2.2e-16***---Signif.codes:0‘***’0.001‘**’0.01‘*’0.05‘.’0.1‘’1-2log L:1684.412>eform(fit)[2,]exp(beta) 2.5%97.5%0.69485200.56367270.8449352Theflexible parametric survival models can be used to estimate a variety of parameters.For example,we can easily estimate survival and compare with predictions with the non-parametric Kaplan-Meier curves.From the output,we note that...4rstpm2:a simple guide>plot(fit,newdata=data.frame(hormon=0),xlab="Time since diagnosis (years)")>lines(fit,newdata=data.frame(hormon=1),lty=2)>lines(survfit(Surv(recyear,censrec==1)~hormon,data=brcancer),col="blue",lty=1:2)>legend("topright",c("PH hormon=0","PH hormon=1","KM hormon=0","KM hormon=1"),+lty=1:2,col=c("black","black","blue","blue"))01234560.40.60.81.0Time since diagnosis (years)S u r v i v alWe can also plot the hazards using ggplot2.This requires that we predict using grid=TRUE to get a time grid,with full=TRUE to include the covariates from newdata ,and with se.fit=TRUE to get the confidence intervals.>library(ggplot2)>predHormon <-predict(fit,newdata=data.frame(hormon=0:1),+type="hazard",grid=TRUE,full=TRUE,se.fit=TRUE)>predHormon <-transform(predHormon,Hormone=factor(hormon,labels=c("No","Yes")))>ggplot(predHormon,+aes(x=recyear,y=Estimate,ymin=lower,ymax=upper,fill=Hormone))++facet_grid(~Hormone)++xlab("Time since diagnosis (years)")++ylab("Hazard")++geom_ribbon()++geom_line()Mark Clements5>ggplot(predHormon,+aes(x=recyear,y=Estimate,ymin=lower,ymax=upper,fill=Hormone))++xlab("Time since diagnosis(years)")++ylab("Hazard")++geom_ribbon(alpha=0.6)+geom_line()+>par(mfrow=1:2)>plot(fit,newdata=data.frame(hormon=0),type="hdiff",6rstpm2:a simple guide+exposed=function(data)transform(data,hormon=1),+xlab="Time since diagnosis (years)")>plot(fit,newdata=data.frame(hormon=0),type="sdiff",+var="hormon",+xlab="Time since diagnosis (years)")>mtext("Effect of hormonal treatment",outer =TRUE,line=-3,cex=1.5,font=2)0123456−0.12−0.08−0.040.00Time since diagnosis (years)H a z a r d d i f f e r e n ce01234560.000.050.100.150.20Time since diagnosis (years)S u r v i v a l d i f f e r e n ceEffect of hormonal treatmentAffiliation:Mark ClementsDepartment of Medical Epidemiology and Biostatistics Karolinska InstitutetEmail:*******************。
Lenovo Enterprise Value SSDs 产品指南说明书
SATA MLC Enterprise Value SSDs (Withdrawn)Product Guide (withdrawn product)The Lenovo Enterprise Value solid-state drives (SSDs) employ cost-effective MLC NAND technology to bring an affordable and performance-driven solution for read-intensive applications. These SSDs are available as 2.5-inch form factor drives with both simple-swap and hot-swap options, as well as 3.5-inch hot-swap drive options and 1.8-inch drive options. These SSDs use a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, these SSDs integrate easily in existing storage infrastructures.Figure 1 shows SATA 2.5-inch MLC Enterprise Value SSD.Figure 1. SATA 2.5-inch MLC Enterprise Value SSDDid you know?Unlike client drives, these solid-state drives for System x® are equipped with a robust suite of enterprise features, including SMART attributes, hot-plug support, and uCode. They also leverage enterprise data path protection to verify data to and from NAND at every possible location and protect the integrity of the data. The NAND flash in these SSDs is screened and then tested specifically for enterprise customer use. Overall, these SSDs provide outstanding IOPS/watt and cost/IOPS for enterprise solutions and are an excellent choice for read-intensive applications like web serving, content delivery, and streaming video.Providing that additional peace of mind, Lenovo Enterprise Value MLC SSDs are covered under Lenovo warranty. These drives carry a 1-year limited warranty, or when installed in a System x server, these drives assume your system's base warranty.Click here to check for updatesFeature64 GB128 GB256 GB512 GBPart49Y583949Y584990Y864890Y866890Y898490Y864390Y866390Y898949Y584449Y5854 numberYes No Yes No No Yes No No Yes No Hot-swapdriveForm2.5-in. 2.5-in. 2.5-in. 2.5-in. 2.5-in. 2.5-in. 2.5-in. 2.5-in. 2.5-in. 2.5-in. factorInterface 6 Gbps SATA 6 Gbps SATA 6 Gbps SATA 6 Gbps SATA Capacity64 GB128 GB256 GB512 GB Endurance36 TB72 TB72 TB72 TBIOPS50,00050,00050,00050,000read*7,0007,5007,5007,500IOPSwrite*Sequential350 MBps350 MBps350 MBps350 MBps read rate†Sequential100 MBps140 MBps140 MBps140 MBps write rate†0.5 ms0.5 ms0.5 ms0.5 ms ReadlatencyWrite3.5 ms 3.5 ms 3.5 ms 3.5 ms latency1500 G/1.0 ms1500 G/1.0 ms1500 G/1.0 ms1500 G/1.0 ms Shock,operatingVibration,2–500Hz at 3.1 G2–500Hz at 3.1 G2–500Hz at 3.1 G2–500Hz at 3.1 G operating* 4 KB block transfers† 128 KB block transfersTable 2. Enterprise Value SSD technical specifications (Part 2: 1.8-inch and 3.5-inch SSDs)Feature64 GB128 GB256 GB512 GBPart number49Y583400W128600W122200W129100W122700W129649Y599300W1301 Hot-swap drive Yes§Yes Yes§Yes Yes§Yes Yes§Yes Form factor 1.8-in. 3.5-in. 1.8-in. 3.5-in. 1.8-in. 3.5-in. 1.8-in. 3.5-in. Interface 6 Gbps SATA 6 Gbps SATA 6 Gbps SATA 6 Gbps SATA Capacity64 GB128 GB256 GB512 GB Endurance36 TB72 TB175 TB350 TBIOPS read*50,00050,00050,00050,000IOPS write*7,0007,5007,5007,500 Sequential read rate†350 MBps350 MBps350 MBps350 MBps Sequential write rate†100 MBps140 MBps140 MBps140 MBps Read latency0.5 ms0.5 ms0.5 ms0.5 msWrite latency 3.5 ms 3.5 ms 3.5 ms 3.5 ms Shock, operating1500 G/1.0 ms1500 G/1.0 ms1500 G/1.0 ms1500 G/1.0 ms Vibration, operating2–500Hz at 3.1 G2–500Hz at 3.1 G2–500Hz at 3.1 G2–500Hz at 3.1 G§ This SSD can be a hot-swap or non-hot-swap drive depending on a server in which it is installed.* 4 KB block transfers† 128 KB block transfersEnterprise Value SSDs and Enterprise SSDs have similar read and write IOPS performance, but the key difference between them is their endurance (or life time) (that is, how long they can perform write operations because SSDs have a finite number of program/erase (P/E) cycles). Enterprise Value SSDs have a bettercost/IOPS ratio but lower endurance compared to Enterprise SSDs. SSD write endurance is typically measured by the number of program/erase (P/E) cycles, that the drive incurs over its lifetime, listed as TBW in the device specification.The TBW value assigned to a solid-state device is the total bytes of written data (based on the number of P/E cycles) that a drive can be guaranteed to complete (% of remaining P/E cycles = % of remaining TBW). Reaching this limit does not cause the drive to immediately fail. It simply denotes the maximum number of writes that can be guaranteed. A solid-state device will not fail upon reaching the specified TBW. At some point based on manufacturing variance margin, after surpassing the TBW value, the drive will reach the end-of-life point, at which the drive will go into a read-only mode. Because of such behavior by Enterprise Value solid-state drives, careful planning must be done to use them only in read-intensive environments to ensure that the TBW of the drive will not be exceeded prior to the required life expectancy.The endurance of Enterprise Value drives is specified based on the following access pattern: 50% random data and 50% sequential data with block size mixes of 5% of the data as 4 KB block size, 5% of the data as 8 KB block size, 10% of the data as 16 KB block size, 35% of the data as 64 KB block size, and 35% of the data as 128 KB block size. The Enterprise Value drives described here are capable of up to 350 TB (512 GB SSDs) of lifetime writes, with the workload stated above as the worse case. For the 512 GB SSD to last in five years inside of the 350 TB of TBW, the drive write workload must be limited to no more than 190 GB of writes per day. For the device to last in three years, the drive write workload must be limited to no more than 320 GB of writes per day.Supported serversTable 3 (Parts 1 and 2) lists the compatibility information for the SATA MLC Enterprise Value SSDs and System x, iDataPlex, and NeXtScale servers.Table 3. System x, iDataPlex, and NeXtScale compatibility (Part 1)Partnumber Description1.8" SSDs49Y583464GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N Y N N Y Y 00W1222128GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N Y N N N N 00W1227256GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N Y N N N Y 49Y5993512GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N Y N N N N 2.5" SSDs49Y583964GB SATA 2.5" MLC HS Enterprise Value SSD YYNYN YN NNNN N49Y584964GB SATA 2.5" MLC SS Enterprise ValueSSDY N N N N N N N N N Y N90Y8648128GB SATA 2.5" MLC HS Enterprise ValueSSDY Y N Y N Y N N N N N N90Y8668128GB SATA 2.5" MLC SS Enterprise ValueSSDY N N Y N Y N N N N Y N90Y8984128GB SATA 2.5" MLC Enterprise Value SSDfor Flex System x222N N N N N N N N N N N N90Y8643256GB SATA 2.5" MLC HS Enterprise ValueSSDY Y N Y N Y N N N N N N90Y8663256GB SATA 2.5" MLC SS Enterprise ValueSSDY N N Y N Y N N N N Y N90Y8989256GB SATA 2.5" MLC Enterprise Value SSDfor Flex System x222N N N N N N N N N N N N49Y5844512GB SATA 2.5" MLC HS Enterprise ValueSSDN Y N Y N Y N N N N N N49Y5854512GB SATA 2.5" MLC SS Enterprise ValueSSDN N N N N N N N N N Y N 3.5" SSDs00W128664GB SATA 3.5" MLC HS Enterprise ValueSSDN N N N Y N Y N N N N N00W1291128GB SATA 3.5" MLC HS Enterprise ValueSSDN N N N Y N Y N N N N N00W1296256GB SATA 3.5" MLC HS Enterprise ValueSSDN N N N Y N Y N N N N N00W1301512GB SATA 3.5" MLC HS Enterprise Value SSD N N N N Y N Y N N N N NPartnumber DescriptionTable 3. System x, iDataPlex, and NeXtScale compatibility (Part 2)Partnumber Description1.8" SSDs49Y583464GB SATA 1.8" MLC Enterprise Value SSD N N N N N N N Y Y Y Y N 00W1222128GB SATA 1.8" MLC Enterprise Value SSD N N N N N N N Y Y Y Y N 00W1227256GB SATA 1.8" MLC Enterprise Value SSD N N N N N N N Y Y Y Y N 49Y5993512GB SATA 1.8" MLC Enterprise Value SSD N N N N N N N Y Y Y Y N 2.5" SSDsY Y Y Y Y Y N Y Y Y Y N 49Y583964GB SATA 2.5" MLC HS Enterprise ValueSSD49Y584964GB SATA 2.5" MLC SS Enterprise ValueN Y N N Y N N N N N N Y SSDN Y Y Y Y Y N Y Y Y Y N 90Y8648128GB SATA 2.5" MLC HS Enterprise ValueSSDN N N N Y Y N Y N N N Y 90Y8668128GB SATA 2.5" MLC SS Enterprise ValueSSD90Y8984128GB SATA 2.5" MLC Enterprise Value SSDN N N N N N N N N N N N for Flex System x222N Y Y Y Y Y N Y Y Y Y N 90Y8643256GB SATA 2.5" MLC HS Enterprise ValueSSD90Y8663256GB SATA 2.5" MLC SS Enterprise ValueN N N N Y Y N Y N N N Y SSDN N N N N N N N N N N N 90Y8989256GB SATA 2.5" MLC Enterprise Value SSDfor Flex System x222Y Y Y Y Y Y N Y Y Y Y N 49Y5844512GB SATA 2.5" MLC HS Enterprise ValueSSDN Y N N Y N N N N N N Y 49Y5854512GB SATA 2.5" MLC SS Enterprise ValueSSD3.5" SSDsN N N N N N Y N N N N N 00W128664GB SATA 3.5" MLC HS Enterprise ValueSSDN N N N N N Y N N N N N 00W1291128GB SATA 3.5" MLC HS Enterprise ValueSSDN N N N N N Y N N N N N 00W1296256GB SATA 3.5" MLC HS Enterprise ValueSSDN N N N N N Y N N N N N 00W1301512GB SATA 3.5" MLC HS Enterprise ValueSSDTable 4 lists the compatibility information for the SATA MLC Enterprise Value SSDs and the BladeCenter® and Flex System™ servers.Table 4. BladeCenter and Flex System compatibilityPartnumber Description1.8" SSDs49Y583464GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N N N N 00W1222128GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N N Y Y 00W1227256GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N N Y Y 49Y5993512GB SATA 1.8" MLC Enterprise Value SSD N N N N N Y N Y Y Y 2.5" SSDs49Y583964GB SATA 2.5" MLC HS Enterprise Value SSD Y Y Y Y N Y N Y N Y 49Y584964GB SATA 2.5" MLC SS Enterprise Value SSD N N N N N N N N N N 90Y8648128GB SATA 2.5" MLC HS Enterprise Value SSD Y Y Y Y N Y N Y Y Y 90Y8668128GB SATA 2.5" MLC SS Enterprise Value SSD N N N N N N N N N N 90Y8984128GB SATA 2.5" MLC Enterprise Value SSD for FlexN N N N N N Y N N N System x22290Y8643256GB SATA 2.5" MLC HS Enterprise Value SSD Y Y Y Y N Y N Y Y Y 90Y8663256GB SATA 2.5" MLC SS Enterprise Value SSD N N N N N N N N N N 90Y8989256GB SATA 2.5" MLC Enterprise Value SSD for FlexN N N N N N Y N N N System x22249Y5844512GB SATA 2.5" MLC HS Enterprise Value SSD Y Y Y Y N Y N Y N Y 49Y5854512GB SATA 2.5" MLC SS Enterprise Value SSD N N N N N N N N N N 3.5" SSDs00W128664GB SATA 3.5" MLC HS Enterprise Value SSD N N N N N N N N N N 00W1291128GB SATA 3.5" MLC HS Enterprise Value SSD N N N N N N N N N N 00W1296256GB SATA 3.5" MLC HS Enterprise Value SSD N N N N N N N N N N 00W1301512GB SATA 3.5" MLC HS Enterprise Value SSD N N N N N N N N N N See the ServerProven® website for the latest compatibility information for System x, BladeCenter, iDataPlex and Flex System servers: /servers/eserver/serverproven/compat/us/Supported storage controllersThe SATA MLC Enterprise Value SSDs require a supported disk controller. Table 5 lists the System x controllers that support these solid-state drives installed in a supported server.SSD Caching support: The SATA MLC Enterprise Value SSDs do not support MegaRAID CacheCade feature of the supported ServeRAID controllers.Table 5. Controllers for System x, iDataPlex, and NeXtScale servers supported with the SSDs (Part 1)Part number Product descriptionOnboardServeRAID M5210e SAS/SATA ControllerN N N N N N N Y N N N N 46C9110ServeRAID M5210 SAS/SATA Controller N Y N Y N Y Y Y N N N N 00AE882ServeRAID F5115-200GB SAS/SATAController N N N N N N Y N N N N N 00AE886ServeRAID F5115-800GB SAS/SATAController N N N N N N Y N N N N N OnboardServeRAID M5110e SAS/SATA ControllerN N N N N Y N N N N N N 81Y4481ServeRAID M5110 SAS/SATA Controller Y Y Y Y Y Y Y N N N Y N 81Y4448ServeRAID M1115 SAS/SATA Controller Y Y Y Y Y N Y N N N Y Y 81Y4492ServeRAID H1110 SAS/SATA Controller Y N Y Y Y N Y Y N N Y Y 90Y4304ServeRAID M5016 SAS/SATA Controller N N N N N N N N N N N N 46M0829ServeRAID M5015 SAS/SATA Controller N N N N N N N N N N N N 46M0916ServeRAID M5014 SAS/SATA Controller N N N N N N N N N N N N 46M0831ServeRAID M1015 SAS/SATA Controller N N N N N N N N N N N N Onboard ServeRAID C105N N N N N N N N N N N N OnboardServeRAID C100N N N N N N N N N N N Y 46M09126Gb Performance Optimized HBA N Y Y Y Y Y N N N N Y N 46C8988N2115 SAS/SATA HBA Y Y N Y Y Y Y N N N N Y 47C8675N2215 SAS/SATA HBANYNYNYYNNNNNTable 5. Controllers for System x, iDataPlex, and NeXtScale servers supported with the SSDs (Part 2)Partnumber Product descriptionOnboard ServeRAID M5210e SAS/SATA Controller N N N N N N N N N N N N 46C9110ServeRAID M5210 SAS/SATA Controller N N N Y N Y N Y N N N N 00AE882ServeRAID F5115-200GB SAS/SATAN N N N N N N N N N N N ControllerN N N N N N N N N N N N 00AE886ServeRAID F5115-800GB SAS/SATAControllerOnboard ServeRAID M5110e SAS/SATA Controller N N N N N N N N N N N N 81Y4481ServeRAID M5110 SAS/SATA Controller N N Y Y Y Y Y Y N Y N Y 81Y4448ServeRAID M1115 SAS/SATA Controller N N Y Y Y Y Y N N Y N Y 81Y4492ServeRAID H1110 SAS/SATA Controller Y Y Y N Y Y Y N N N N Y 90Y4304ServeRAID M5016 SAS/SATA Controller N N N N N N N N Y N Y N 46M0829ServeRAID M5015 SAS/SATA Controller Y Y N N N N N N Y N Y N 46M0916ServeRAID M5014 SAS/SATA Controller Y Y N N N N N N Y N Y N 46M0831ServeRAID M1015 SAS/SATA Controller Y Y N N N N N N N N N N Onboard ServeRAID C105N N N N N N N N N N N N Onboard ServeRAID C100N N N N N N N N N N N N 46M09126Gb Performance Optimized HBA Y Y Y Y Y Y Y Y Y Y Y Y 46C8988N2115 SAS/SATA HBA N N N Y N Y Y Y N Y Y N 47C8675N2215 SAS/SATA HBA N N N Y N Y N Y N N N N Table 6 lists the BladeCenter and Flex System controllers that support Lenovo SATA Enterprise Value SSDs installed in a supported server.SSD Caching support: The SATA MLC Enterprise Value SSDs do not support Performance Accelerator and SSD Caching Enabler features of the supported ServeRAID controllers.Table 6. BladeCenter and Flex System compatibilityTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®BladeCenter®Flex SystemNeXtScaleServeRAIDServerProven®System x®eXFlashiDataPlex®The following terms are trademarks of other companies:Intel® is a trademark of Intel Corporation or its subsidiaries.Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
Access2 中文手册
快速参考指南使用说明体外 诊断用P/N A24301M生产商：贝克曼库尔特有限公司美国加利福尼亚州富勒顿市 邮编：92835电话：(001)714-871-4848在美国印刷© 2006 Beckman Coulter, Inc.BECKMAN COULTER, INC. • 4300 N. Harbor Blvd. • Fullerton, CA 928352006年6月EC REP出版说明本Access 2快速参考指南的每一页都带有修订版本和发行日期。
除了标题页和出版说明页之外的每一页，修订版本信息都标明在页底上。
P/N A24301M 年月本手册用于和 Access 2免疫检测系统配套使用。
Ostase 和Hybritech 是Beckman Coulter, Inc.的子公司Hybritech Incorporated 的注册商标。
Access, AccuTnI, DataLink 以及 BECKMAN COULTER 标志均为Beckman Coulter, Inc 的注册商标。
本操作手册涵盖了两个修订版本发布的内容。
以下所列内容发布为A24301M ，发布日期为2006年6月。
• 扉页以及出版说明 • 第六章：第6-12页本操作手册之所有其它内容均发布为修订版A24301A ，发布日期为2005年7月。
目 录1 系统概述. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1•用途. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1•手册内容. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1•参考资料. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1•技术支持. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1•系统描述. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2•系统模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3•系统状态键. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3•系统命令键. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5•主菜单工作流程图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6•警告和危险. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7•系统规格和特征. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9•电气要求. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10•安装. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12•质量保证书. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-132 系统的关闭和开机. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1•重启 PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1•重启仪器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3•关闭仪器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5•仪器开机. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-53 消耗品. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1•更换冲洗缓冲液瓶. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1•更换废液瓶. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2•更换发光底物瓶. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3•安装反应管(RV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4•更换反应管(RV)废物袋. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5•安装试剂盒. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6•卸载试剂盒. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7•撤回错放试剂包. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-84 样本架和样本容器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1•样本架. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1•计算足够的样本量. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1•样本容器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25 样本管理. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1•处理实验室信息系统(LIS)病人测试请求. . . . . . . . . . . . . . . . . . . . . 5-2•手工输入病人测试请求. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3•输入定标测试请求. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4•输入质控测试请求. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5•样本处理. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-66保养. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1•日保养. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1•周保养. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4•系统检测. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-107 故障排除. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1•事件日志. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1•故障排除事件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1•系统检测故障排除. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3•仪器故障排除. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12•项目故障排除. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-198 操作原理. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1•反应管传送. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1•项目定标原理. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2•凝块探测原理. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4A 订购信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1•项目特异性试剂. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1•系统所使用的消耗品. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-41 系统概述用途Access2免疫检测系统是一台体外诊断用的设备，能对人体体液中存在的不同分析物的浓度进行定量、半定量或者定性的测定。
IBMSystemx3850M2服务器用户手册
IBM System x3850 M2 服务器用户手册目录1 服务器简介............................................................................................................................................. -2 -微处理器：........................................................................................................................................... - 2 - 存：......................................................................................................................................................... - 2 - 驱动器： ............................................................................................................................................... - 2 - 扩展托架：........................................................................................................................................... - 3 - 扩展槽： ............................................................................................................................................... - 3 - 电源：.................................................................................................................................................... - 3 - 大小：.................................................................................................................................................... - 3 - 集成的功能部件：............................................................................................................................. - 4 - 噪音辐射: .............................................................................................................................................. - 5 - 环境：.................................................................................................................................................... - 5 - 散热量: ................................................................................................................................................... - 5 - 电气输入: .............................................................................................................................................. - 6 - 2 服务器功能组件.................................................................................................................................... - 6 -服务器的主要组件： ........................................................................................................................ - 6 - 服务器控件、接口、指示灯和电源：........................................................................................ - 7 - 开启服务器......................................................................................................................................... - 14 - 关闭服务器......................................................................................................................................... - 15 -1 服务器简介微处理器：·Intel® Xeon™多核MP·每个核心2 MB（最小）二级高速缓存·1066 MHz 前端总线（FSB）·最多支持四个微处理器注：使用Configuration/Setup Utility 程序可确定微处理器的类型和速度。
科尔摩根直线电机选型指南说明书
科尔摩根直接驱动直线电机选型指南带有AKD TM 伺服驱动系统尔2K O LLM O R G E N 科摩根3目录直接驱动直线（DDL ）电机4AKD ™伺服驱动 10 联合研发能力 14 直接驱动直线电机综述 15 无铁芯 - 非冷却型DDL 的数据和尺寸IL06 系列 18 IL12 系列 20 IL18 系列 22IL24 系列 26无铁芯磁路 28 有铁芯DDL 的数据和尺寸ICD05 系列 32ICD10 系列 34ICD 磁路 36 有铁芯- 非冷却型DDL 的数据和尺寸IC11 系列 40 IC22 系列 42 IC33 系列 46IC44 系列 50 有铁芯- 水冷型DDL 的数据和尺寸IC11 系列 54 IC22 系列 56 IC33 系列 60IC44 系列 64有铁芯磁路 68 连线和输出 70高柔性电缆组 72 应用选型 74 型号命名规则 78MOTIONEERING ® 应用引擎81科尔摩根直接驱动直线电机选型指南克服设计、采购和时间障碍科尔摩根很清楚：如果能够帮助原始设备制造商的工程师克服遇到的障碍，就可以显著提高其工作成效。
因而，我们主要通过如下三种方式来帮助他们：集成标准和定制产品在很多情况下，最佳方案都不是一成不变的。
我们拥有专业应用知识，可以根据全面的产品组合来修改标准产品或开放全定制解决方案，从而为设计奠定良好的基础。
提供运动解决方案而不仅仅是部件在各公司减少供应商数量和工程人力的过程中，他们需要一家能够提供多种集成解决方案的全系统供应商。
科尔摩根就采用了全面响应模式，为客户提供全套解决方案，这些方案将编程软件、工程服务以及同类最佳的运动部件结合起来。
覆盖全球我们在北美、欧洲、中东和亚洲拥有众多直销、工程支持团队，制造工厂以及分销商，并且临近全球各地的原始设备制造商。
这种便利优势可以加速我们的供货过程，根据客户需要随时随地供货。
财务和运营稳定性科尔摩根的母公司是价值130亿美元的丹纳赫集团。
Schneider Electric 1 8Harmony GTO ATEX IECEx 指令指南说
Harmony GTO ATEX/IECExInstruction Guide Concerning the use of Harmony GTO graphic terminals for applications in potentially explosive atmospheres (Zones 2/22)Schneider Electric8ème rue, ZI Carros 06516 Carroscedex – FranceType examination certificate: INERIS 12ATEX3007X IECEx Certificate of Conformity: IECEx INE16.0057X Type examination certificate : CML 21UKEX4748X S AFETY I NSTRUCTIONSRead these instructions carefully, and look at the equipment to become familiar with the device before trying to install, operate, or maintain it. The following special messages may appear throughout this documentation or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.The addition of this symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists, which will resultin personal injury if the instructions are not followed.This is the safety alert symbol. It is used to alert you topotential personal injury hazards. Obey all safety messagesthat follow this symbol to avoid possible injury or death.DANGER indicates a hazardous situation which, if not avoided,will result in death or serious injury.The information in this document is subject to change without notice.Copyright © 10/2021 Schneider ElectricAll Rights Reserved.HRB43278 05Printed in *HRB4327805*P LEASE N OTEElectrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. A qualified person is one who has skills and knowledge related to the construction and operation of electrical equipment and its installation, and has received safety training to recognize and avoid the hazards involved.S COPEThis present document applies when the Harmony GTO terminal bears marking. They are supplied only with 24 Vdc. This documentation has to be kept and always refer to those instructions for installation, operation, maintenance or evolution of your system.You can download this instruction guide at.If any translation is needed, you can contact your local Schneider support or sales center.WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.WARNINGCAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.CAUTIONNOTICE is used to address practices not related to physical injury.NOTICERelevant StandardsThe product have been manufactured in accordance with:•Standard EN 60079-0 (2012) + A11 (2013) and IEC 60079-0 (2011):Explosive atmospheres - Part 0: Equipment - General requirements.•Standard EN 60079-15 (2010) and IEC 60079-15 (2010): Explosiveatmospheres - Part 15: Equipment protection by type of protection “n”.•Standard EN 60079-31 (2014) and IEC 60079-31 (2013): Explosiveatmospheres - Part 31: Equipment dust ignition protection by enclosure “t”.POTENTIAL FOR EXPLOSIONInstall, use, and maintain the product in accordance with:•Standard IEC 60079-14: Explosive atmospheres - Part 14: Electricalinstallations design, selection and erection.•Standard EN 60079-17: Inspection and maintenance of electricalinstallations in hazardous areas.•Edicts, by-laws, laws, directives, circulars, standards, regulations and any other document relating to where the apparatus is installed.Failure to follow these instructions will result in death or serious injury.Permitted zones of applicationRefer to the section "Markings" to get information about the permitted zones of protection and the types of protection.•Harmony GTO terminals installed in zones 2/22 hazardous areas must be certified and bear the marking•Ensure with the marking that the terminals are compatible with theconditions permitted for the hazardous area at the site where it is being used.Installation, Operation and MaintenanceMake sure you follow all the recommendations in the Harmony GTO Quick Reference Guide and additionally those listed below.Ground ConnectionMetal part for HMIGTO6315, HMIGTO5315, HMIGTO2315 should be connected to ground.When installed in a metal cabinet or enclosure, the contact point shall be paintfree and metal cabinet or enclosure should be grounded.1Gasket (Non-metal)2Panel (Metal)3Brackets (Metal)4M4 Hex nuts (Metal)CAUTIONENVIRONMENTAL HAZARDS TO THE EQUIPMENT•Do not allow layers of dust to form on Harmony GTO terminals. Clean the terminal regularly.•Ensure that Harmony GTO terminals are installed according to its manufacturer’s specifications.Failure to follow this instruction can result in injury or equipment damage.MarkingsATEX and IECEx markings, applied to the Harmony GTO terminals are as follows:Models:HMIGTO6315, HMIGTO6310, HMIGTO5315, HMIGTO5310,HMIGTO4310, HMIGTO2315,HMIGTO2310Models: HMIGTO2300, HMIGTO1310, HMIGTO1300, HMIGTO3510Schneider ElectricF-06516 Carros INERIS 12ATEX3007XIECEx INE 16.0057XCML 21UKEX4748XII 3 G DEx nA nC IIC T5 GcEx tc IIIC T100°C DcTamb: 0°C to +55°CWARNING- Do not disconnect when circuit islive.- Potential electrostatic charginghazard (see instructions).Schneider Electric F-06516 CarrosINERIS 12ATEX3007X IECEx INE 16.0057X CML 21UKEX4748X II 3 G D Ex nA nC IIC T5 Gc Ex tc IIIC T100°C Dc Tamb: 0°C to +50°C WARNING - Do not disconnect when circuit is live.- Potential electrostatic charging hazard (see instructions).NOTE: Other required elements such as product reference, serial number and date code of manufacture are already marked on products. All models may be followed by alphanumeric characters and there is no impact safety related critical components and constructions.Name: Hakim GRIBDigital PlantCertification DirectorEU DECLARATION OF CONFORMITYWe:Schneider Electric Industries SAS35 rue Joseph MonierF-92506 Rueil MalmaisonHereby declare under our sole responsibility that the products:Are in conformity with the requirements of the following directives and conformity was checked in accordance with the following standards.Subject to correct installation, maintenance and use conforming to its intended purpose, to the applicable regulations and standards, to the supplier's instructions and to accepted rules of the art. This declaration becomes invalid in the case of any modification to the products not authorized by us.Compliance with the ATEX Directives will require the application of ATEX guide giving requirements, details and advices for installation of products used. The guides are available on Issued at Osaka - JAPAN: October 11th 2021Trademark Harmony or MagelisProduct, TypeHuman Machine InterfaceHMIGTO:HMIGTO1300, HMIGTO1310, HMIGTO2300,HMIGTO2310, HMIGTO2315, HMIGTO3510,HMIGTO4310, HMIGTO5310, HMIGTO5315,HMIGTO6310, HMIGTO6315Includes models with additional alphanumeric charactersat the end of the model number.DirectiveHarmonized standard / Notified body reference ATEX Directive2014/34/EUEN 60079-0: 2012/A11:2013(*), EN 60079-15: 2010, EN 60079-31: 2014(*) A review against harmonizedstandard EN IEC 60079:2018,shows no significant changesrelevant to these models, sostandard EN 60079: 2012continues to represent the “stateof art”.EC Type examination certificate: INERIS 12ATEX3007X and IECEx INE 16.0057X II 3 G D Ex nA nC IIC T5 Gc Ex tc IIIC T100°C Dc Tamb: 0°C to +50°C / +55°C By INERIS: Parc Technologique ALATA, 60550Verneuil en Halatte - FranceName: David WilliamsVP Marketing UK&IZone UK & IrelandUK DECLARATION OF CONFORMITYWe:ManufacturerUK Representative Schneider Electric Industries SASSchneider Electric Limited 35 rue Joseph MonierStafford Park Rueil Malmaison 92500 - France Telford, TF3 3BL - United Kingdom Hereby declare under our sole responsibility that the products:Are in conformity with the requirements of the following directives and conformity was checked in accordance with the following standards.Subject to correct installation, maintenance and use conforming to its intended purpose, to the applicable regulations and standards, to the supplier's instructions and to accepted rules of the art. This declaration becomes invalid in the case of any modification to the products not authorized by us.Compliance with the ATEX Directives will require the application of ATEX guide giving requirements, details and advices for installation of products used. The guides are available on Issued at Telford – United Kingdom: October 11th 2021Trademark Harmony or MagelisProduct, TypeHuman Machine InterfaceHMIGTO:HMIGTO1300, HMIGTO1310, HMIGTO2300,HMIGTO2310, HMIGTO2315, HMIGTO3510,HMIGTO4310, HMIGTO5310, HMIGTO5315,HMIGTO6310, HMIGTO6315Includes models with additional alphanumeric charactersat the end of the model number.RegulationDesignated standard / Approved body reference SI 2016 No. 1107EN 60079-0: 2012/A11:2013(*), EN 60079-15: 2010, EN 60079-31: 2014(*) A review against harmonizedstandard EN IEC 60079:2018,shows no significant changesrelevant to these models, sostandard EN 60079: 2012continues to represent the “stateof art”.EC Type examination certificate: CML 21UKEX4748X II 3 G D Ex nA nC IIC T5 Gc Ex tc IIIC T100°C Dc Tamb: 0°C to +50°C / +55°C By Eurofins E&E CML Limited: Ellesmere Port CH654LZ - UK。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
iATKOS的ML2指南，是由uphuck»30 12月2012，23:35 2012年12月iATKOS的ML2指南奥斯卡苹果和OSX86社区..感谢@ mhr_pii，@ dramen和@ krmtna的自己的作品..感谢@ denizckosar的艺术品..感谢到所有GGRN人..注意：>>>> OSX86是什么？<<<< >>>>iATKOS的是什么？<<<<1 - A）这是一个的OSX86安装程序和非苹果X86_64 Intel CPU的计算机，这是专为。
B）此安装程序包括苹果的Mac OS X 山狮10.8.2（生成12C54）。
c）你并不需要任何其他的OS X系统在目标计算机上安装OS X山狮。
你只需要iATKOS的ML2 dmg文件刻录到双层DVD /蓝光或一个USB介质上恢复。
2 - 要求和支持列表：要求：兼容的主板，英特尔酷睿和新的64位CPU，最低1GB RAM，最小15GB可用空间的目标分区，兼容VGA 卡。
检查您的硬件细节做的比较与下面的硬件支持列表。
iATKOS的ML2 <<<>>>硬件兼容性信息您也可以访问维基的HCL页和其他OSX86平台，寻求更多支持。
你会希望了解您的计算机的详细信息，然后再尝试安装此系统。
为了让您的硬件细节（厂商ID，设备ID），你可以- 火了一个Linux的Live CD和引导（即分手的魔术，Ubuntu的Live CD）。
“lspci的NN”终端，按回车键，并做笔记。
- 引导iATKOS的ML2媒体，打开终端，键入“的lspci-NN”，按回车键，记笔记。
- 获取/珠峰终极版Windows上安装并使用它来导出信息。
大多数情况下，一个硬件的相容性可以定义它的芯片组，和设备ID，但是这不是一个规则。
主板/ VGA卡/其他电脑配件不同品牌相同的芯片组和设备ID可能有差异，可能会导致不兼容的。
因此>搜索，阅读，并尝试在您的电脑前询问“请问这个硬件/计算机与iATKOS ML2工作？”。
简单地说，如果一个硬件OSX8610.8.2（即博通BCM4313，Atheros 的AR5007等）绝对是不兼容的，那么它也与iATKOS ML2不兼容。
3 -检查MD5 iATKOS的DMG文件，您下载并确保我们的网站上发布的MD5校验和相匹配的一个。
如果没有，那么你有一个错误的DMG镜像文件。
4 -请仔细阅读在安装目录的步骤，如果出现错误，不要惊慌。
向下滚动到故障排除指南。
请确保您已经阅读/应用故障排除指南的步骤之前在论坛上发帖！相关信息：- 64-bit/32-bit的事情：Mac OS X山狮的是一个64位的操作系统，这意味着它只能在64位模式下启动。
32位应用程序会工作，但加载32位编译程序/模块/ kext的山狮是不可能的。
因此，需要自己只有32位模块（kext文件）的应用程序，可能部分或完全失败。
- 可以使清洁，升级和更新安装到您现有的OSX86系统使用的iATKOS ML2。
请仔细阅读相关章节。
- 易于安装软件的RAID卷。
没有额外的用户需要采取的行动。
请仔细阅读相关章节。
- NVIDIA显卡将有问题较少使用OS X 10.8的iATKOS ML2因为自动ID注入。
- 网络设备将被自动检测。
- 板载声卡设备将被自动检测。
感谢安迪Vandijck和巫术队。
- 使用软件更新将主系统的更新，就像真正的Mac电脑在大多数计算机上是可以使用的iATKOS ML2。
请仔细阅读相关章节。
- 此安装程序可能不包括所有必要的驱动程序，您的设置要求。
可能需要额外的步骤，将要采取的用户设置和使用这样的组件。
- 主系统是全股票。
我们是我们真正的Mac电脑上运行iATKOS的主系统！- 介绍轨道>“流感- 我Deşarj全额计提”- 德语翻译@ stahlgewitter的。
- 希伯来文翻译@לורוחןמור（罗马Horol）。
- 法语翻译@ julianbougnon。
安装前的准备：- BIOS设置：- 你的BIOS设置为其默认设置。
- 执行禁止位：启用- XD（如果存在的话）：启用- 限制CPUID最大：禁用- 设置CPU的所有核心活动/启用。
- 虚拟化（如果存在的话）：启用或禁用，试试吧。
- 超线程：启用或禁用，试试吧。
- HPET（高精度事件定时器/ PCH）：启用- SATA模式：AHCI- 所有超频/性能/涡轮等值设置为自动。
- 设置UEFI模式兼容模式设置（如果存在的话）- 准备安装目标：- 将需要安装的目标分区或磁盘。
- 如果你不是高级用户，我建议你用一个干净的硬盘没有个人数据/ OS 为目标，并拔掉所有其他的硬盘驱动器与主板相连，只是为了安全起见。
- 如果你不是高级用户，如果你的目标磁盘，包括个人数据和/或任何操作系统，我建议你任何事情之前备份您的数据。
- 分手魔术或OS X磁盘工具可用于分区和这样的操作准备的目标。
- 使用parted魔术，如果你不是一个先进的用户。
分手分手魔术：魔术是一个Linux的Live OS项目进行硬盘操作。
下载ISO 映像从>> <<刻录到CD / DVD与任何合适的应用程序，并启动您的计算机。
运行分区编辑器应用程序并创建你的目标。
OS X磁盘实用程序：引导iATKOS的ML2，选择不同的语言，通过实用程序菜单运行“磁盘工具”，创造你的目标。
创建你的目标分区格式化为HFS +（Mac OS扩展（日志式））。
分区类型：您可以选择通过分区选择目标硬盘MBR（主引导记录/ MSDOS）或GPT（GUID分区表）。
如果你没有需要/想改变你现有的分区类型，只是不去碰它。
如果你想改变它，要注意目标硬盘上的所有现有数据将会消失。
谷丙转氨酶：优点：您可以添加/删除分区，并改变它们的大小，在GPT分区的驱动器而无需重新分区，你甚至可以做它飞在运行OS X系统分区。
您可以创建最多128个分区，在GPT 分区的驱动器。
您可以使用GPT分区的驱动器为OS X软件RAID缺点：多重引导新手操作也不是那么容易。
MBR：优点：很容易操纵多重缺点：与OS X磁盘工具分区操作需要整个分区表recreationing。
无软件RAID OS X2TB的分区大小限制你可以有最多4个可引导分区（4个主分区），您只能为OS X开机OS X 上安装其余分区（逻辑分区时，超过5个），超过前3个主分区。
- 我建议你的目标硬盘MBR，如果你不是一个先进的用户。
目标应该是一个主分区为MBR分区的硬碟。
开始安装：- iATKOS的：ML2媒体（蓝光双层DVD 或USB媒体启动电脑）大多数的OSX86兼容电脑将能够启动iATKOS的ML2媒体默认情况下，（无需进入命令），但某些计算机将需要一些引导标志（s）/命令（S）输入启动PROMT。
如果您要启动从DVD /蓝光，那么你需要按F8键，在第10秒开机PROMT。
常见的引导标志/命令，为iATKOS的ML2安装媒体：- 您可以输入不带引号（“）。
- 您可以尝试通过增加它们之间的空间，即“-V的CPU = 1”的组合。
“GraphicsEnabler = YES”这是英特尔HD 4000的安装需要。
“处理器= 1”，这可能需要约2011插座的主板和一些笔记本电脑。
对于那些2011插座主板，在安装过程中，应选择TSC同步。
内核补丁应选择为那些有问题的笔记本电脑。
“UseKernelCache =否”，此命令需要电脑，在任何时候（包括PCI配置开始“行）或行为怪异的计算机，这可以是一个CMOS复位或忽视其他SATA端口问题的冻结。
通过输入以下命令，ElliottRTC.kext 改性IOPCIFamily.kext将在安装过程中被加载。
“-V”城市模式。
“-X”安全模式“。
“USBBusFix =是”这个选项是修复USB相关问题的一些主板冻结或USB端口，可能会导致失败。
“NPCI = 0x3000”冻结“PCI配置开始]”行，可以试试这个命令的计算机。
“ATIConfig = XX”，“XX”是ATI的framebuffer的名称为目标模型（在谷歌搜索）。
这可能需要一些英特尔HD 4000 + ATI GPU的电脑“GraphicsEnabler =是”命令启动。
如果你使用这个命令来引导iATKOS 的ML2媒体，那么你也将需要用它来引导你的ML2系统。
- 选择语言全新安装：1 - 运行“磁盘工具”，通过实用程序菜单并清除干净安装的目标2 - 选择目标盘进行安装3 - 单击“自定义”*“，选择你所需要的4 - 点击安装从以前的版本升级：- 你可以升级你现有的狮子（10.7.x）和山狮（10.8.x）安装到山狮10.8.2或刷新安装到你的问题10.8.2系统（保持你的应用程序，用户帐户，用户设置和用户数据）使用的iATKOS ML2。
要升级雪豹（10.6.x版本），你应该先升级到狮子（10.7.x）使用的iATKOS L2或任何其他方法。
- 我建议你尝试一个干净的安装到另一个硬盘驱动器在您的计算机在升级之前，看到的，如果您的计算机上或不实际工作，并确定您的安装选择列表。
- 您将需要重新安装你的特殊升级后的设备驱动程序。
即M-AUDIO火线声卡驱动程序，您的3G调制解调器的驱动程序，您的ATI显卡驱动程序..- 有些以前版本的OS X上运行您的应用程序可能无法与山狮10.8.2兼容，所以知道他们在升级后可能会失败。
搜索您现有的软件/驱动程序的兼容性山狮，然后再升级到山狮。
1 - 选择升级安装的目的地2 - 单击“自定义”*“，选择你所需要的3 - 点击安装*自定义：- 这是最重要的部分的安装。
- 已经有一个基本的默认选择的配置文件，将2个或3个包到默认的配置文件大多数计算机将可能是不够的。
- 找到最好的为您的电脑配置，如果你没有足够的经验在目标硬件上，你可能要尝试很多次，所以不要来论坛抱怨像“我安装了3倍，但它仍然不能正常工作..“。
- 请仔细阅读描述的包。
下面是常见和最重要的定制安装：Bootloader的选项- 图形的Enabler：应选择大多数的显卡，但对于一些较新的车型，如nVidia 的开普勒GTX系列GPU一些ATI 6xxx/5xxx 6xx系列，。
额外的“ATIConfig引导= xx”的命令可能让一些ATI的卡与GraphicsEnabler工作。
“XX”是ATI 的framebuffer的名称为目标模型（在谷歌搜索）。
- 内核缓存：这标志可能是一些笔记本电脑的问题。
这些笔记本电脑可以使用此选项只有在正确的DSDT编辑。