CD4532
cd4053cn
CC4053------三2选1模拟开关简要说明：CC4053 是三2通道数字控制模拟开关，有三个独立的数字控制输入端1C～3C和INH输入，具有低导通阻抗和很低的截止漏电流。
幅值为4.5～20V的数字信号可控制峰－峰值至20V的模拟信号。
例如，若VDD＝＋5V，VSS＝0，VEE＝－13.5V，则0～5V的数字信号可控制－13.5～4.5V的模拟信号。
这些开关电路在整个VDD－VSS和VDD－VEE电源范围内具有极低的静态功耗，与控制信号的逻辑状态无关。
当INH输入端＝“1”时，所有的通道截止。
二位二进制信号选通4通道中的一通道，可连接该输入端至输出。
CC4053提供了16引线多层陶瓷双列直插（D）、熔封陶瓷双列直插（J）、塑料双列直插（P）和陶瓷片状载体（C）4种封装形式。
推荐工作条件：电源电压范围…………3V～15V输入电压范围…………0V～V DD工作温度范围M类…………－55℃～125℃E类………….－40℃～85℃极限值：电源电压…...－0.5V～18V输入电压……－0.5V~V DD+0.5V输入电流…………….±10mA储存温度…………－65℃～150℃引出端符号：1C～3C 控制端I0/O0～I1/O1 输入输出端INH 禁止端O/I 公共输出/输入端V DD正电源V EE模拟信号地Vss 数字信号地逻辑符号：引出端排列（俯视）：逻辑表达式：t R =t F =20nS;C L =50pF t PLH t PHL 传输延迟时间（导通或截止） （最大）A->I/O A->O /I －0 0 0 －50 0 0 05.0 10.015.05.0－720 320 240 450 －nSt R =t F =20nS;C L =50pFRL=10k Ω t PLH t PHL 传输延迟时间（导通） （最大）INH->I/O INH->O/I－0 0 0 －100 0 0 0 5.0 10.015.05.0 － 720 320 240 400－ nS控制部分（C、INH）t R =t F =20nS;C L =50pFRL=300Ω t PLHt PHL 传输延迟时间（关态） （最大）INH->I/O INH->O/I－0 0 0 －100 0 0 05.0 10.015.05.0－450 210 160 300 － nSC I 输入电容（最大） C 、INH －－7.5－ pF*峰－峰电压对称值为（V DD-V EE）/2 **两通道的末端逻辑图：。
CD4051BE
LOGIC LEVEL CONVERSION
16 VDD
CD4053B
BINARY TO
1 OF 2 DECODERS
IN/OUT
WITH
INHIBIT cy cx by bx ay ax
3 5 1 2 13 12
TG
A † 11
TG
TG
B † 10
TG
C† 9 INH † 6
a logic “1” is present at the inhibit input terminal, all
channels are off.
The CD4051B is a single 8-Channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.
CD4052B
X CHANNELS IN/OUT 3210 11 15 14 12
16 VDD
A † 10 B† 9 INH † 6
LOGIC LEVEL CONVERSION
BINARY TO
1 OF 4 DECODER
WITH INHIBIT
8 VSS
7 VEE
TG TG TG TG TG TG TG TG 1524 0123 Y CHANNELS IN/OUT
The CD4053B is a triple 2-Channel multiplexer having three separate digital control inputs, A, B, and C, and an inhibit input. Each control input selects one of a pair of channels which are connected in a single-pole, double-throw configuration.
CD4053
Rev 1.30 SHENZHEN CENTURY TIANCHUANG TECHNOLOGY CO.,LTD. ＩＣ设计 ＩＣ开发 国产ＩＣ 研发
CD4051/52/53
结构框图
CD4051B
CD4052B
Aug. 2010
6
深圳市世纪天创科技有限公司 西安市临潼书院东路１号中国航天七七一集成电路封装厂 ｈｔｔｐ：／／ｗｗｗ．ｔｃ－ｉｃ．ｃｏｍ
Aug. 2010
1
深圳市世纪天创科技有限公司 西安市临潼书院东路１号中国航天七七一集成电路封装厂 ｈｔｔｐ：／／ｗｗｗ．ｔｃ－ｉｃ．ｃｏｍ
Rev 1.30 SHENZHEN CENTURY TIANCHUANG TECHNOLOGY CO.,LTD. ＩＣ设计 ＩＣ开发 国产ＩＣ 研发
Rev 1.30 SHENZHEN CENTURY TIANCHUANG TECHNOLOGY CO.,LTD. ＩＣ设计 ＩＣ开发 国产ＩＣ 研发
CD4051/52/53
33
直流电参数(一)
符号 项目
IDD 静态器件电流
条件
VDD＝5V VDD＝10V VDD＝15V
CD4051/52/53
CD4051/4052/4053 多路选择模拟开关
概述
CD4051 系列模拟开关是用数字信号控制的多路调制/选择模拟开关，具有低 导通电阻和很低的关态漏电流。通过模拟开关的模拟量幅度可高达 15VP-P，与 CD 系列数字电路的 3V～15V 工作范围正好相对应。例如，选 VDD ＝5V，VSS ＝0V，VEE ＝-5V，那么幅度-5V～+5V 的模拟信号就可用 0V～5V 的数字信号来控制传输。 CD4051 系列模拟开关的静态功耗极小。 CD4051B 是八选一模拟开关，用 3 个二进制输入信号控制端 A、B、C 来选择 八个模拟通道中的任一个为“ON”状态。INH 输入端输入“1”电平时将全部通 道置为关断状态。 CD4052B 是双四选一模拟开关，每组四选一模拟开关分别有 2 个二进制控制 输入。这两位二进制信号可将 4 个模拟通道中任一个置为导通状态。INH 输入端 输入“1”电平时将两组四选一模拟开关所有通道置为关断状态。 CD4053B 是三二选一模拟开关，相当于三组单刀双掷开关。三个数字控制输 入 A、B、C 可独立的选择每组模拟开关刀位的导通方向。INH 输入端输入“1” 电平时将三组二选一模拟开关所有通道置为关断状态。
cd4553
MC14553B3-Digit BCD CounterThe MC14553B 3–digit BCD counter consists of 3 negative edge triggered BCD counters that are cascaded synchronously. A quad latch at the output of each counter permits storage of any given count. The information is then time division multiplexed, providing one BCD number or digit at a time. Digit select outputs provide display control.All outputs are TTL compatible.An on–chip oscillator provides the low–frequency scanning clock which drives the multiplexer output selector.This device is used in instrumentation counters, clock displays,digital panel meters, and as a building block for general logic applications.•TTL Compatible Outputs •On–Chip Oscillator •Cascadable•Clock Disable Input•Pulse Shaping Permits Very Slow Rise Times on Input Clock •Output Latches •Master ResetMAXIMUM RATINGS (Voltages Referenced to V ) (Note 1.)may occur.2.Temperature Derating:Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high–impedance circuit. For proper operation, V in and V out should be constrained to the range V SS v (V in or V out ) v V DD .Unused inputs must always be tied to an appropriate logic voltage level (e.g.,either V SS or V DD ). Unused outputs must be left open.DevicePackage Shipping ORDERING INFORMATIONMC14553BCP PDIP–1625/Rail MC14553BDWSOIC–1647/Rail查询CD4553 供应商Figure 1. Block Diagram121011139765142115V DD = PIN 16V SS = PIN 8TRUTH TABLE4.The formulas given are for the typical characteristics only at 25_C.5.To calculate total supply current at loads other than 50 pF:I T(C L) = I T(50 pF) + (C L – 50) Vfkwhere: I T is in µA (per package), C L in pF, V = (V DD – V SS) in volts, f in kHz is input frequency, and k = 0.004.7.Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance.Figure 2. 3–Digit Counter Timing Diagram (Reference Figure 4)100099999899799699599499399299199090190089910110099989796959493929190898887861716151413121110987654321UNITS CLOCKUNITS Q0UNITS Q1UNITS Q2UNITS Q3TENS CLOCKTENS Q0TENS Q3HUNDREDSCLOCK HUNDREDS Q0HUNDREDS Q3DISABLE OVERFLOW MASTER RESET SCAN OSCILLATOR DIGIT SELECT 1DIGIT SELECT 2DIGIT SELECT 3LLOPERATING CHARACTERISTICSThe MC14553B three–digit counter, shown in Figure 4,consists of three negative edge–triggered BCD counters which are cascaded in a synchronous fashion. A quad latch at the output of each of the three BCD counters permits storage of any given count. The three sets of BCD outputs (active high), after going through the latches, are time division multiplexed, providing one BCD number or digit at a time. Digit select outputs (active low) are provided for display control. All outputs are TTL compatible.An on–chip oscillator provides the low frequency scanning clock which drives the multiplexer output selector.The frequency of the oscillator can be controlled externally by a capacitor between pins 3 and 4, or it can be overridden and driven with an external clock at pin 4. Multiple devices can be cascaded using the overflow output, which provides one pulse for every 1000 counts.The Master Reset input, when taken high, initializes the three BCD counters and the multiplexer scanning circuit.While Master Reset is high the digit scanner is set to digit one; but all three digit select outputs are disabled to prolong display life, and the scan oscillator is inhibited. The Disable input, when high, prevents the input clock from reaching the counters, while still retaining the last count. A pulse shaping circuit at the clock input permits the counters to continue operating on input pulses with very slow rise rmation present in the counters when the latch input goes high, will be stored in the latches and will be retained while the latch input is high, independent of other rmation can be recovered from the latches after the counters have been reset if Latch Enable remains high during the entire reset cycle.Figure 4. Expanded Block DiagramBCD OUTPUTS (ACTIVE HIGH)(ACTIVE HIGH)Figure 5. Six–Digit DisplayS T R O R E S C L O C K I N P U TD I S P L A Y S A RE L O W C U R R E N T L E D s(I p e a k < 10 m A P E R S E G M E N T )PDIP–16P SUFFIX PLASTIC DIP PACKAGENOTES:1.DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.2.CONTROLLING DIMENSION: INCH.3.DIMENSION L TO CENTER OF LEADS WHENFORMED PARALLEL.4.DIMENSION B DOES NOT INCLUDE MOLD FLASH.5.ROUNDED CORNERS OPTIONAL.MDIM MIN MAX MIN MAXMILLIMETERSINCHESA0.7400.77018.8019.55B0.2500.270 6.35 6.85C0.1450.175 3.69 4.44D0.0150.0210.390.53F0.0400.70 1.02 1.77G0.100 BSC 2.54 BSCH0.050 BSC 1.27 BSCJ0.0080.0150.210.38K0.1100.130 2.80 3.30L0.2950.3057.507.74M0 10 0 10S0.0200.0400.51 1.01____SOIC–16DW SUFFIX PLASTIC SOIC PACKAGE CASE 751G–03Notes11NotesON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATIONCENTRAL/SOUTH AMERICA:Spanish Phone:303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)Email:ONlit–spanish@Toll–Free from Mexico: Dial 01–800–288–2872 for Access –then Dial 866–297–9322ASIA/PACIFIC: LDC for ON Semiconductor – Asia SupportPhone:303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)Toll Free from Hong Kong & Singapore:001–800–4422–3781Email: ONlit–asia@JAPAN: ON Semiconductor, Japan Customer Focus Center4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031Phone: 81–3–5740–2700。
AP_MotorDrives_Brochure_final
w w w.i n f i n e o n .c o m /D r i v e r -I C w w w.i n f i n e o n .c o m /B r i d g e sMotor control designed to drive your innovationsMotor Drive Solutions May 2007Designed to drive your innovations: Infineon motor control solutionsS P U R R E D B Y E N V I R O N M E N T A L L A W S mandating higher efficiency as well as consumer demand for more features and better functionality, designers have been turning to low-voltage 5V to 48V electric motor drives in recent years. The need for more efficient designs is prompting engineers to move from unipolar or H-Bridge motors to 3-Phase motors, ranging from simple 100mA DC drives for small motors to 100A 3-Phase motors.T H E V A R I E T Y O F L O W -V O L T A G E M O T O R S used is as diverse as the features they enable. Easiest to implement, DC brush motors are the most common electric motor used today. Stepper motors see wide use in positional control applications. Engineers turn to brushless DC motors for high-temperature, high-reliability control applications, and where size constraints limit the use of DC brush motors. High-current, high-reliability applications demand Permanent Magnet Synchronous Motors (PMSM).Satisfying the demand for more efficient, feature-rich designsI N F I N E O N H A S S E I Z E D T H E N O . 1 S P O T in automotive power semiconductors by creating innovative power control solutions. Engineers value the reliability and versatility designed into these low-voltage motor control products, and have used them successfully in many non-automotive applications.Reliable, viable, undeniableI N F I N E O N ’S C R E D O is Never stop thinking. If you wish to discover how this abstract idea translates into concrete reality, take a moment to review our wide range of motor control products. You’re sure to find the perfect solution to drive your products among our offering of motor control products. We’re looking forward to talking to you about how we can help you realize your next innovation.Motor control designed to drive your innovationsI N F I N E O N L E V E R A G E S M A N Y T E C H N O L O G I E S to create these innovations, for example trench N-and P-Channel MOSFETs, S-Smart power and logic, and Smart Power Technologies (SPT) featuring monolithic analog,digital and power. We also use advanced assembly techniques such as chip-by-chip, chip-on-chip and power bond for high-current wire bonding.Innovative technologies, advanced techniquesB YC O M B I N I N G T H E S E T E C H N O L O G I E S ,Infineon produces forward-looking products designed to enable the next generation of innovative motor control solutions. Alongside a broad portfolio of motor control power products, we also offer all the building blocks for end-to-end motor control solutions, including voltage regulators,communication ICs, microcontrollers and hall sensors.Step up to the next generationMotor drives application segmentsAutomotiveWipersClimate controlHVAC fansEngine cooling fansPower windowsSunroofsDoor locksPower steeringSnowmobilesand boatsIndustryAutomation andcontrolCordless drills andbattery-drivenpower toolsPower-adjustable seats(as used in first-classcabins)Medical: Dental chairs,ceiling arms forclean rooms,hospital beds, etc.RoboticsHome appliancesPrinters andcutting printersToysStepper DC brushDC brushDC brush3-PhaseM MMM3فDoor module ICs, H-Bridge, Multi-Half-Bridge, Servo driver and Stepper driverSmart Power DC Motor BridgesH-Bridges3-Phase DriverH-Bridge DriverBridge Driver ICsBridges for idle speed and throttle controlMotor Control N-Channel MOSFETS 30V, 40V, 55VMSL1, 260°C reflow/automotivemosfetN-Channel MosfetsTrilithICSophisticated solutions for smarter applicationsShort-circuit protection Diagnostic feedbackIntegrated DC PowerBridgesDoor module ICsEnhanced reliability and performance for door modulesflexible control for power stages and detailed diagnostic feedback.Features:Full-Bridge (150m Ω) for the main door-lock motorTwo Half-Bridges (400m Ω) for deadbolt and mirror position or fold motor Two Half-Bridges (800m Ω) for mirror positionHigh-side switch (100m Ω) for mirror defrostFour high-side switches (500m Ω) for 5W and 10W lampsAnalog current-sense output and built-in multiplexer for fewer μC ADC channels All outputs with short-circuit protection and diagnosisOvertemperature protection with warning Open load diagnosis for all outputs Pinning optimized for efficient PCB layout Charge pump output for N-Channel MOSFET enabling reverse-polarity protectionVery low current consumption in sleep mode (max. 6μA)Standard 16-bit SPI for control and diagnosisOver- and undervoltage lockout Power SO package with full-size heat slug for excellent thermal resistance Lead-free /halogen-free package/Door-Module-ICSmart DC Motor Bridges7A H-Bridges with SPI-Interfacepower loss conditions. The full protection and diagnosis capability make the device especially suitable for safety relevant applications, e.g. in automotive /Bridges20H-BridgeFeatures:Delivers up to 6A continuous and 7A peak currentOptimized for DC motor management applicationsVery low R DS(ON)of typ. 150 m Ω@ 25 °C per switch Operates at supply voltages of up to 40VOvervoltage protection against transients up to 45VOutputs short-circuit protected Standard SPI-Interface, daisy-chain capabilityAdjustable chopper current regulation of up to 7A Temperature monitor with prewarning, warning and shutdown Over- and undervoltage-lockout Open-load detectionDetailed load-failure diagnosis by SPIMinimized power dissipation due to active free wheeling Low EMI due to voltage slope regulationVery low current consumption (typ. 20 μA @ 25°C) in stand-by (Inhibit) modeEnhanced power P-DSO-PackageAutomotive quality, flexibility and toughnessDMOS power stages with bipolar analog and CMOS digital control circuits.Robust technology, protection circuits and the discerning quality standards of the Infineon Automotive & Industrial division endow this family with the rugged road-readiness automotive applications demand.Multi-Half-Bridge: TLE6208-3G/TLE6208-6G smart power technologyFeatures:Multiple DMOS Half-Bridges with protection and diagnosis Low ON resistance and current consumptionOutputs fully short-circuit-protected with diagnosisOvertemperature protection withhysteresis and diagnosisTemperature prewarning Over- and undervoltage lockout Internal freewheeling diodes Very low current consumption (typically 10μA) in standby (inhibit)modeStandard 16-bit SPI for control and diagnosisTLE6208-6G freely configurable as asingle switch or Half-BridgeEnhanced power DSO package/Bridges23Servo DriverRobust, reliable, roadworthyThe servo driver family comprises of three devices, TLE4206G, TLE4206-2G and TLE4209. They feature a fully integrated Full-Bridge with freewheeling diodes and smart power protection features for automotive headlight beam-leveling control applications. The standard thermally enhanced power P-DSO-14 package leverages low R TH for environments with high ambient temperatures of 150°C.The servo driver family is offered in DOPL bipolar high-voltage power technology. With features such as overvoltage and undervoltage lockout as well as short-circuit and overtemperature built-in protection, these robust and reliable devices are perfect for automotive applications.Automatic headlight beam controlEuropean, Indian, Korean and Japanese laws mandate automatic headlight beam control systems for cars with XENON bulbs. An automatic system adjusts the angle of the headlight beams without requiring driver intervention.Automatic static headlight beam controlThis is the basic control system. Position sensors on the front and rear axles generate a differential feedback signal that apprises the Electrical Control Unit (ECU) of the car’s load status. The ECU then periodically corrects the vertical headlight position, with the car’s speed determining the frequency of adjustment. Higher speeds require more frequent correction to account for changes in gas tank volume. As periodic adjustment suffices, either DC brush motors or stepper motors (Driver IC TLE4729 recommended) can be used in automatic static control. The TLE4206-2G was designed to improve the performance of an automatic static system, equipped with DC brush motors.Manual headlight beam controlA manual headlight beam control system enables the driver to adjust the angle of the headlight using a dedicated switch on the dashboard. The driver may adjust the headlight beam to suit the car’s current load. This system is the standard solution for headlights equipped with halogen bulbs. The TLE4206G servo driver is suitable for driving the DC brush motor used for this application.Features:Protected bipolar power stages Low saturation voltageInternal freewheeling diodes Optimized for Headlight Beam Control (HBC) applications TLE 4205 (for truck applications,2 x 1A)TLE 4206G (manual HBC, 2 x 0.8A)TLE 4206-2G (automatic staticHBC, 2 x 0.8A)TLE 4209 (manual HBC, 2 x 0.8A)Electrical Control Unit (ECU) forautomatic static headlight beam controlHeadlight Beam ActuatorLEFTHeadlight Beam ActuatorRIGHTV+VREFGNDV+VREFGNDR pull_upRfilterCfilterT1Rbasee.g. InfineonXC866V+VREFGNDTLE4206-2GTLE4206-2GPWMGND2524Block diagram of an automatic static HBC/Bridges /BridgesHeadlight Beam Control, Actuator-ECUReverse-polaritydiodeHalf-BridgeHalf-BridgeRANGE 13REF 14FB 1HYST 27CPB3,4,5,10,11,12GNDGNDTLE 4206G36 V470 nFDz6 OUT19 OUT2Dashboard SwitchVREFIN50kΩ50 kΩRREF50 kΩRRRHYH100 kΩ+VBRFBRHYL100 kΩRFB1 kΩVS8CCPX47nFRREF1 kΩCSProtectionand LogicRange-AMPServo-AMPHyst-AMPMA detailed view of an applied TLE4206 circuit/BridgesStepper DriverCost-efficient, durable and reliableFeatures:Full- to half-step operationProtected bipolar power stagesImplemented current controlError flag for diagnosisTCA3727 (suitable for industryapplication, 2 x 0.75A)TLE 4726 (suitable for truckapplication, 2 x 0.75ATLE 4727 (2 x 0.75A)TLE 4728 (2 x 0.75A)TLE 4729 (2 x 0.753A)Automotive N-Channel MOSFET Stepper Driver*See packages on page 3528293130High Power Control DC Motor Bridges1)In concept BTN = Green NovalithIC1)OL = Open load2)OT = Overtemperature 3)OC = OvercurrentBTM = Green TrilithIC*See packages on page 35*See packages on page 35NovalithICTrilithICSmart Power DC Motor BridgesOrder No. B112-H9017-X-X-7600Printed in Germany WS 05072.Z &P 2004554*and representative officesPublished by Infineon Technologies AGINFINEON TECHNOLOGIESSALES OFFICES WORLDWIDE *(country/area)AustraliaInfineon T echnologies Australia Pty. Ltd.885 Mountain Highway Bayswater,Victoria 3153T (+61) 3-972188 88Fax (+61) 3-97 2188 08AustriaInfineon T echnologies Austria AG Production /Development Center Siemensstraße 29500 VillachT (+43) 51 77 70Fax (+43) 5 17 77 35 01Infineon T echnologies Austria AG Operngasse 20B /311040WienT (+43) 0-51 77 71 11 00Fax (+43) 0-51 77 71 15 00Belgium /Luxembourg NetherlandsInfineon T echnologies Holding B.V.GeneraalLemanstraat 672018 AntwerpenT (+31) 10-2 17 68 00Fax (+31) 10-2 17 68 19Infineon Technologies Holding B.V.Westblaak 323012 KM Rotterdam T (+31) 10 21 768 00Fax (+31) 10 21 768 19BrazilInfineon T echnologies South America Ltda.Avenida Ermano Marchetti, 1435- 4° andar05038-001 Água Branca São PauloT (+55) 11-38 17 28 00Fax (+55) 11-38 17 28 10CanadaInfineon T echnologies North America Corp.340 March Road, Suite 301Kanata, Ontario K2K 2E2T (+1) 866-9 51 95 19 51Fax (+1) 613-5 91 8954ChinaInfineon TechnologiesCenter of Competence (Shanghai) Co.,Ltd.12th Floor, Quantum Plaza No.27 Zhi Chun Road Haidian District Beijing 100083T (+86) 10-82 35 61 18Fax (+86) 10-82 35 54 74Infineon Technologies Hong Kong Ltd.Suite 302, Level 3 Festival Walk 80 Tat Chee Avenue Kowloon Tong,Hong KongT (+852) 28-32 05 00Fax (+852) 28-27 97 62Infineon TechnologiesInternational Trade (Shanghai) Co.,Ltd.No. 7 & 8, Lane 647, Song Tao Road Zhang Jian Hi-Tech Park Shanghai 201203T (+86) 21-61 01 90 00Fax (+86) 21-50 80 62 04Infineon Technologies China Co.,Ltd.Shenzhen Office, Room 1502, Block A Tian An International Building Renmin Nan Road Shenzhen 518 001T (+86) 7 55-22 19 24 00Fax (+86) 7 55-82 280217Infineon Technologies Taiwan Co., Ltd.12F-1, No. 3-2 Yuan Qu Street,Nan Kang District Taipei 115T (+8 86) 2-26 55 75 00Fax (+8 86) 2-2 65 57 5018DenmarkInfineon Technologies Nordic AB Herlev Hovedgade 201A 2730 HerlevT (+45) 44-50 77 00Fax (+45) 44-50 77 01FinlandInfineon Technologies Nordic AB Visitor’s Address Upseerinkatu 1P .O.Box 27602601EspooT (+3 58) 10-6 80 84 00Fax (+3 58) 10-6 80 84 01FranceInfineon T echnologies France S.A.S.Centre de vie Agora – Bat. A2Z.I. des Paluds 13400 AubagneT (+33) 44-2 82 46 10Fax (+33) 44-2 82 46 18Infineon Technologies France S.A.S Burolines 22 ter, rue Marcel Doret 31700 BlagnacT (+33) 5-34 55 13 30Fax (+33) 5-34 55 13 34Infineon T echnologies France S.A.S.39-47, Boulevard Ornano 93527Saint-Denis CEDEX 2T (+33) 1-48 09 72 00Fax (+33) 1-48 09 72 90GermanyComneon GmbH & Co. KG Südwestpark 2-490449 NurembergT (+49) 91 13 78 80Fax (+49) 9 11 37 88 10 00Hitex Development Tools GmbH Greschbachstraße 1276229 KarlsruheT (+49) 72 19 62 80Fax (+49) 72 19 62 81 89Infineon T echnologies AG Siemensstraße 31-3371254 Ditzingen /Stuttgart T (+49) 71 56-17 91 90Fax (+49) 71 56-1 79 19 90Infineon T echnologies AGDüsseldorfer Landstraße 401,47259 DuisburgT (+49) 20 3-7 29 87 11Fax (+49) 20 3-7 29 87 60Infineon Technologies AG Naegelsbacherstraße 2691052 ErlangenT (+49) 91 31-97 00 10Fax (+49) 91 31-9 70 01 99JapanInfineon Technologies Japan K.K.Gate City Osaki, East Tower 21Fl /22Fl /23Fl 1-11-2 Osaki Shinagawa-ku Tokyo 141-0032T (+81) 3 57 45 71 00Fax (+81) 3 57 45 74 10Infineon Technologies Japan K.K.Maruyama Nissei Building 14F 2-14-21 Nishiki, Naka-ku Nagoya-shi, Aichi 460-0003T (+81) 52-2 23 15 70Fax (+81) 52-2 23 14 61Infineon Technologies Japan K.K.ORIX-Dojima Building 8F 2-1-31, Dojima, Kita-ku Osaka-shi,Osaka 530-0003T (+81) 6-47 97 44 60Fax (+81) 6-47 97 44 62KoreaInfineon Technologies Korea Co., Ltd.4th Floor Sigma Tower7-19 Shincheon-dong Songpa-gu Seoul 138-734T (+82) 2-34 60 09 50Fax (+82) 2-34 60 09 01Infineon Technologies Korea Co., Ltd.15th Floor SJ Technoville 60-19Gasan-dong Geumcheongu Seoul 153-801T (+82) 2-34 60 08 80Fax (+82) 2-34 60 09 09MexicoEverest Sales & Solutions Av. Manuel Acunia 2674-101Col. Ladron de Guevara 44680 Guadalajara, J. AL T (+52) 33-36 42 21 01Fax (+52) 33-36 40 65 62PolandSiemens Sp. z.o.o.Ul. Zupnicza 1103-821 WarsawT (+48) 22-8 709150Fax (+48) 22-8 709159Puerto RicoKlamco Electronics 527 Street QH No. 1Country ClubCarolina, PR 00982T (+17 87) 257 79 22Fax (+17 87) 257 79 61RussiaInfineon T echnologies RUSS LLC Leninsky prospect 113/1117 198 MoscowT (+7) 4 95-9 56 51 95Fax (+7) 4 95-9 56 51 95SingaporeInfineon T echnologies Asia Pacific Pte. Ltd.8 Kallang Sector Singapore 349 282T (+65) 68-76 28 88Fax (+65) 68-76 31 22South AfricaSiemens Components P .O. Box 3438Halfway House 16802146 SandtonT (+27) 11-6 5220 00Fax (+27) 11-6 5226 14SpainSiemens, S.A.División de Componentes Ronda de Europa, 528760Tres Cantos-Madrid T (+34)91-51471 55Fax (+34)91-5147014SwedenInfineon T echnologies Sweden AB Isafjordsgatan 1616481 KistaT (+46) 8-7 57 50 00Fax (+46) 8-7 57 46 12SwitzerlandInfineon T echnologies Schweiz AGBadener Strasse 623P .O.Box 15708048 ZürichT (+41) 1-4 97 80 40Fax (+41) 1-4 97 80 50TurkeySiemens Sanayi ve Ticaret A.S.Yakacik Yolu No. 11134861 Kartal, IstanbulT (+90) 2 16-4 59 28 51Fax (+90) 2 16-4 59 28 51United KingdomInfineon HouseGreat Western Court Hunts Ground Road Stoke GiffordBRISTOL BS34 8HPT (+44) (0) 11 79 52 88 23U.S.A.Infineon Technologies North America Corp.2529 Commerce Drive, Suite H Kokomo, IN 46902T (+1) 7 65-4 56 19 28Fax (+1) 7 65-4 56 38 36Infineon Technologies Industrial Power, Inc.1050 Route 22Lebanon, NJ 08833T (+1) 9 08-23 6 56-21Fax (+1) 9 08-2 36 56-20Infineon Technologies North America Corp.19111 Victor Parkway Livonia, MI 48152T (+1) 734-7 79 50 00Fax (+1) 734-7 79 50 01Infineon T echnologies North America Corp.12770 High Bluff Drive, Suite 100San Diego, CA 92130T (+1) 85 85 09 21 60Fax (+1) 85 85 09 21 61Infineon T echnologies North America Corp.640 N. McCarthy pitas, CA 95035T (+1) 8 66-9 51 95 19Infineon T echnologies AG Lindenplatz 220099 HamburgT (+49) 40-23 51 94 74Fax (+49) 40-23 51 94 75Infineon T echnologies AG Paderborner Straße 130539HannoverT (+49) 511-8 76 56 20Fax (+49) 511-87 65 62 90Infineon T echnologies AG Am Campeon 1-1285579 Neubiberg T (+49) 89-23 40Fax (+49) 89-23 42 46 94Infineon T echnologies AG Südwestpark 6590449 NurembergT (+49) 911-25 29 30Fax (+49) 911-2 52 93 93Infineon Technologies AG Max-Planck-Straße 559581 WarsteinT (+49) 29 02-7 64-0Fax (+49) 29 02-7 64-12 56 HungaryInfineon T echnologies Cegléd Kft. Gizella u. 51-571143 BudapestT (+36) 14 71 28 24Fax (+36) 14 71 28 25IndiaInfineon T echnologies India Pvt. Ltd.10th Floor, Discoverer Building International Technology Park Whitefield Road Bangalore 560 066T (+91)80-41 39 20 01Fax (+91)80-41 39 23 33IranSiemens SSKNo. 32 Taleghani Ave.15875-4773 Teheran T (+98) 2 16 14 23 17Fax (+98) 2 16 46 30 60IrelandInfineon Technologies Ireland Ltd.69 Fitzwilliam Lane Dublin 2T (+3 53) 1-7 99 95 00Fax (+3 53) 1-7 99 95 01IsraelNisko Ltd.2A,Habarzel Street Tel Aviv 69710T (+9 72) 3-7 65 73 00Fax (+9 72) 3-7 65 73 33ItalyInfineon T echnologies Italia S.r .l.Via Vipiteno, 420128 MilanT (+39) 02-25 20 41Fax (+39) 02-2 52 0443 95。
2016新编CD系列引脚大全
常用4000系列标准数字电路的中文名称资料型号器件名称厂牌备注CD4000 双3输入端或非门+单非门 TICD4001 四2输入端或非门 HIT/NSC/TI/GOLCD4002 双4输入端或非门 NSCCD4006 18位串入/串出移位寄存器 NSCCD4007 双互补对加反相器 NSCCD4008 4位超前进位全加器 NSCCD4009 六反相缓冲/变换器 NSCCD4010 六同相缓冲/变换器 NSCCD4011 四2输入端与非门 HIT/TICD4012 双4输入端与非门 NSCCD4013 双主-从D型触发器 FSC/NSC/TOSCD4014 8位串入/并入-串出移位寄存器 NSCCD4015 双4位串入/并出移位寄存器 TICD4016 四传输门 FSC/TICD4017 十进制计数/分配器 FSC/TI/MOTCD4018 可预制1/N计数器 NSC/MOTCD4019 四与或选择器 PHICD4020 14级串行二进制计数/分频器 FSCCD4021 08位串入/并入-串出移位寄存器 PHI/NSCCD4022 八进制计数/分配器 NSC/MOTCD4023 三3输入端与非门 NSC/MOT/TICD4024 7级二进制串行计数/分频器 NSC/MOT/TICD4025 三3输入端或非门 NSC/MOT/TICD4026 十进制计数/7段译码器 NSC/MOT/TICD4027 双J-K触发器 NSC/MOT/TICD4028 BCD码十进制译码器 NSC/MOT/TICD4029 可预置可逆计数器 NSC/MOT/TICD4030 四异或门 NSC/MOT/TI/GOLCD4031 64位串入/串出移位存储器 NSC/MOT/TICD4032 三串行加法器 NSC/TICD4033 十进制计数/7段译码器 NSC/TICD4034 8位通用总线寄存器 NSC/MOT/TICD4035 4位并入/串入-并出/串出移位寄存 NSC/MOT/TI CD4038 三串行加法器 NSC/TICD4040 12级二进制串行计数/分频器 NSC/MOT/TICD4041 四同相/反相缓冲器 NSC/MOT/TICD4042 四锁存D型触发器 NSC/MOT/TICD4043 4三态R-S锁存触发器("1"触发) NSC/MOT/TI CD4044 四三态R-S锁存触发器("0"触发) NSC/MOT/TI CD4046 锁相环 NSC/MOT/TI/PHICD4047 无稳态/单稳态多谐振荡器 NSC/MOT/TICD4048 4输入端可扩展多功能门 NSC/HIT/TICD4049 六反相缓冲/变换器 NSC/HIT/TICD4050 六同相缓冲/变换器 NSC/MOT/TICD4051 八选一模拟开关 NSC/MOT/TICD4052 双4选1模拟开关 NSC/MOT/TICD4053 三组二路模拟开关 NSC/MOT/TICD4054 液晶显示驱动器 NSC/HIT/TICD4055 BCD-7段译码/液晶驱动器 NSC/HIT/TI CD4056 液晶显示驱动器 NSC/HIT/TICD4059 “N”分频计数器 NSC/TICD4060 14级二进制串行计数/分频器 NSC/TI/MOT CD4063 四位数字比较器 NSC/HIT/TICD4066 四传输门 NSC/TI/MOTCD4067 16选1模拟开关 NSC/TICD4068 八输入端与非门/与门 NSC/HIT/TICD4069 六反相器 NSC/HIT/TICD4070 四异或门 NSC/HIT/TICD4071 四2输入端或门 NSC/TICD4072 双4输入端或门 NSC/TICD4073 三3输入端与门 NSC/TICD4075 三3输入端或门 NSC/TICD4076 四D寄存器CD4077 四2输入端异或非门 HITCD4078 8输入端或非门/或门CD4081 四2输入端与门 NSC/HIT/TICD4082 双4输入端与门 NSC/HIT/TICD4085 双2路2输入端与或非门CD4086 四2输入端可扩展与或非门CD4089 二进制比例乘法器CD4093 四2输入端施密特触发器 NSC/MOT/STCD4094 8位移位存储总线寄存器 NSC/TI/PHICD4095 3输入端J-K触发器CD4096 3输入端J-K触发器CD4097 双路八选一模拟开关CD4098 双单稳态触发器 NSC/MOT/TICD4099 8位可寻址锁存器 NSC/MOT/STCD40100 32位左/右移位寄存器CD40101 9位奇偶较验器CD40102 8位可预置同步BCD减法计数器CD40103 8位可预置同步二进制减法计数器CD40104 4位双向移位寄存器CD40105 先入先出FI-FD寄存器CD40106 六施密特触发器 NSC\TICD40107 双2输入端与非缓冲/驱动器 HAR\TICD40108 4字×4位多通道寄存器CD40109 四低-高电平位移器CD40110 十进制加/减,计数,锁存,译码驱动 STCD40147 10-4线编码器 NSC\MOTCD40160 可预置BCD加计数器 NSC\MOTCD40161 可预置4位二进制加计数器 NSC\MOTCD40162 BCD加法计数器 NSC\MOTCD40163 4位二进制同步计数器 NSC\MOTCD40174 六锁存D型触发器 NSC\TI\MOTCD40175 四D型触发器 NSC\TI\MOTCD40181 4位算术逻辑单元/函数发生器CD40182 超前位发生器CD40192 可预置BCD加/减计数器(双时钟) NSC\TICD40193 可预置4位二进制加/减计数器 NSC\TICD40194 4位并入/串入-并出/串出移位寄存 NSC\MOT CD40195 4位并入/串入-并出/串出移位寄存 NSC\MOT CD40208 4×4多端口寄存器CD4501 4输入端双与门及2输入端或非门CD4502 可选通三态输出六反相/缓冲器CD4503 六同相三态缓冲器CD4504 六电压转换器CD4506 双二组2输入可扩展或非门CD4508 双4位锁存D型触发器CD4510 可预置BCD码加/减计数器CD4511 BCD锁存,7段译码,驱动器CD4512 八路数据选择器CD4513 BCD锁存,7段译码,驱动器(消隐)CD4514 4位锁存,4线-16线译码器CD4515 4位锁存,4线-16线译码器CD4516 可预置4位二进制加/减计数器CD4517 双64位静态移位寄存器CD4518 双BCD同步加计数器CD4519 四位与或选择器CD4520 双4位二进制同步加计数器CD4521 24级分频器CD4522 可预置BCD同步1/N计数器CD4526 可预置4位二进制同步1/N计数器CD4527 BCD比例乘法器CD4528 双单稳态触发器CD4529 双四路/单八路模拟开关CD4530 双5输入端优势逻辑门CD4531 12位奇偶校验器CD4532 8位优先编码器CD4536 可编程定时器CD4538 精密双单稳CD4539 双四路数据选择器CD4541 可编程序振荡/计时器CD4543 BCD七段锁存译码,驱动器CD4544 BCD七段锁存译码,驱动器CD4547 BCD七段译码/大电流驱动器CD4549 函数近似寄存器CD4551 四2通道模拟开关CD4553 三位BCD计数器CD4555 双二进制四选一译码器/分离器CD4556 双二进制四选一译码器/分离器CD4558 BCD八段译码器CD4560 "N"BCD加法器CD4561 "9"求补器CD4573 四可编程运算放大器CD4574 四可编程电压比较器CD4575 双可编程运放/比较器CD4583 双施密特触发器CD4584 六施密特触发器CD4585 4位数值比较器CD4599 8位可寻址锁存器CD22100 4×4×1交叉点开关电力安全月工作总结[电力安全月工作总结]电力安全月工作总结2011年3月1日至3月31日为我公司的安全生产月，**变电站围绕;夯实基储提高素质、树立标杆、争创一流;的主题，开展了丰富多彩、形式多样的具体行动：通过看板形式宣传安全第一、预防为主的方针；通过48+4的学习机会，进行安全生产大讨论；通过安全活动进行查找本站的隐患的活动，电力安全月工作总结。
色卡表
颜色名称颜色对照表以及相对应的代码鸨色#f7acbc 赤白橡#deab8a油色#817936绀桔梗#444693踯躅色#ef5b9c 肌色#fedcbd伽罗色#7f7522花色#2b4490桜色#feeeed 橙色#f47920青丹#80752c瑠璃色#2a5caa蔷薇色#f05b72 灰茶#905a3d莺色#87843b琉璃绀#224b8f韩红#f15b6c 茶色#8f4b2e利久色#726930绀色#003a6c珊瑚色#f8aba6 桦茶色#87481f媚茶#454926青蓝#102b6a红梅色#f69c9f 枯茶#5f3c23蓝海松茶#2e3a1f杜若色#426ab3桃色#f58f98 焦茶#6b473c青钝#4d4f36胜色#46485f薄柿#ca8687 柑子色#faa755抹茶色#b7ba6b群青色#4e72b8薄红梅#f391a9 杏色#fab27b黄緑#b2d235铁绀#181d4b曙色#bd6758 蜜柑色#f58220苔色#5c7a29蓝铁#1a2933红色#d71345 褐色#843900若草色#bed742青褐#121a2a赤丹#d64f44 路考茶#905d1d若緑#7fb80e褐返#0c212b红赤饴色萌黄藤纳戸#d93a49 #8a5d19 #a3cf62 #6a6da9臙脂色#b3424a 丁子色#8c531b苗色#769149桔梗色#585eaa真赭#c76968 丁子茶#826858草色#6d8346绀蓝#494e8f今様色#bb505d 黄栌#64492b柳色#78a355藤色#afb4db梅染#987165 土器色#ae6642若草色#abc88b藤紫#9b95c9退红色#ac6767 黄枯茶#56452d松叶色#74905d青紫#6950a1苏芳#973c3f 狐色#96582a白緑#cde6c7菫色#6f60aa茜色#b22c46 黄橡#705628薄緑#1d953f鸠羽色#867892红#a7324a 银煤竹#4a3113千草色#77ac98薄色#918597银朱#aa363d 涅色#412f1f青緑#007d65薄鼠#6f6d85赤#ed1941 胡桃色#845538浅緑#84bf96鸠羽鼠#594c6d朱色#f26522 香色#8e7437緑#45b97c菖蒲色#694d9f洗朱#d2553d 国防色#69541b草色#225a1f江戸紫#6f599c红桦色#b4534b 练色#d5c59f木贼色#367459紫#8552a1红绯肉色常盘色灭紫#ef4136 #cd9a5b #007947 #543044桦色#c63c26 人色#cd9a5b緑青色#40835e葡萄鼠#63434f铅丹色#f3715c 土色#b36d41千歳緑#2b6447古代紫#7d5886赭#a7573b 小麦色#df9464深緑#005831暗红#401c44绯色#aa2116 琥珀色#b76f40萌葱色#006c54葡萄#472d56丹#b64533 木兰色#ad8b3d青白橡#375830茄子绀#45224a土#b54334 栀子色#dea32c革色#274d3d紫绀#411445焦香#853f04 朽叶#d1923f麹尘#375830浓色#4b2f3d真红#840228 萱草色#c88400仙斎茶#27342b二蓝#402e4c绯#7a1723 黄金#c37e00若竹色#65c294菖蒲色#c77eb5红海老茶#a03939 金色#c37e00青磁色#73b9a2牡丹色#ea66a6浅苏芳#8a2e3b 金茶#e0861a青竹色#72baa7赤紫#f173ac鸢色#8e453f 卵色#ffce7b铁色#005344白#fffffb小豆色#8f4b4a 山吹色#fcaf17锖鼠#122e29胡粉色#fffef9弁柄色黄土色铁御纳戸生成色#892f1b #ba8448 #293047 #f6f5ec栗梅#6b2c25 朽叶色#896a45青緑#00ae9d灰白#d9d6c3海老茶#733a31 空五倍子色#76624c锖浅葱#508a88石竹色#d1c7b7深绯#54211d 莺茶#6d5826水浅葱#70a19f象牙色#f2eada赤铜色#78331e 向日葵色#ffc20e新桥色#50b7c1乳白色#d3d7d4赤褐色#53261f 郁金色#fdb933浅葱色#00a6ac薄钝#999d9c金赤#f15a22 砂色#d3c6a6白群#78cdd1银鼠#a1a3a6赤茶#b4533c 芥子色#c7a252御纳戸色#008792茶鼠#9d9087赤锖色#84331f 淡黄#dec674瓮覗#94d6da鼠色#8a8c8e黄丹#f47a55 亜麻色#b69968水色#afdfe4薄墨色#74787c赤橙#f15a22 枯色#c1a173蓝鼠#5e7c85利休鼠#7c8577柿色#f3704b 鸟子色#dbce8f秘色#76becc铅色#72777b肉桂色#da765b 黄色#ffd400空色#90d7ec灰色#77787b桦色#c85d44 蒲公英色#ffd400青#009ad6钝色#4f5555炼瓦色中黄蓝色煤竹色#ae5039 #ffe600 #145b7d #6c4c49锖色#6a3427 刈安色#f0dc70浓蓝#11264f黒茶#563624桧皮色#8f4b38 黄檗色#fcf16e勿忘草色#7bbfea黒橡#3e4145栗色#8e3e1f 緑黄色#decb00露草色#33a3dc浓鼠#3c3645黄赤#f36c21 鶸色#cbc547缥色#228fbd墨#464547代赭#b4532a 海松色#6e6b41浅缥#2468a2黒#130c0e骆驼色#b7704f 鶸茶#596032薄缥#2570a1黒铁#281f1d黄茶#de773f 山鸠色#525f42薄花色#2585a6蝋色#2f271d洗柿#c99979 生壁色#5f5d46绀青#1b315e紫黒#1d1626,。
cd4053
Ordering Code:
Order Number Package Number
Package Description
CD4051BCM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
CD4051BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
CD4052BCM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
电子发烧友
CD4051BC • CD4052BC • CD4053BC Single 8-Channel Analog Multiplexer/Demultiplexer • Dual 4-Channel Analog Multiplexer/Demultiplexer • Triple 2-Channel Analog Multiplexer/Demultiplexer
CD4053BCN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
150
15.0
120
tTHL、tTLH 输出转换时间
5.0
-
200
10.0
100
15.0
80
C1 输入电容（任一输入端）
-
-
7.5
单位 V V V V mA mA µA µA 单位 ns
ns pF
推荐工作条件
引出端排列（俯视）
电源电压范围……………….3V～15V
输入电压范围………………..0V～VDD
工作温度范围
M 类……………….－55℃～125℃
E 类……………….－40℃～85℃
极限值 电源电压…...－0.5V～18V 输入电压……－0.5V~VDD+0.5V 输入电流…………….±10mA 储存稳定…………….－65℃～150℃
（V） （V） （V）
VOL 输出低电平电压 -
5/0 5.0
0.05
（最大）
10/0 10.0
15/0 15.0
VOH 输出高电平电
-
5/0 5.0
4.95
压
10/0 10.0
9.95
（最小）
15/0 15.0
14.95
VIL 输入低电平电压 0.5/4.5 -
5.0
1.5
（最大）
1.0/9.0
10.0
3.0
1.5/13.5
15.0
4.0
VIH 输入高电平电压 4.5/0.5 -
5.0
3.5
（最小）
9.0/1.0
10.0
7.0
13.5/1.5
15.0
11.0
IOH 输出高电平电流 2.5
5/0 5.0 -2.0 -1.8 -1.6 -1.3 -1.15
（最小）
4.6
5/0 5.0 -0.64 -0.61 -0.51 -0.42 -0.36
输入地二进制编码呈现于输出线 Y2~Y0，且组选线
பைடு நூலகம்
YGS 为高电平，表明优先输入存在，当无优先输入
时，允许输出 Ys 为高电平。如果如何一个输入为
高电平，则 Ys 为低电平且所有级联低阶级无效。
CC4532 提供了 16 引线多层陶瓷双列直插（D）、
熔封陶瓷双列直插（J）、塑料双列直插（P）和陶瓷
片状载体（C）4 种封装形式。
参数
测试条件 VDD（V）
规范值
最小
最大
tPLH、tPHL
ST → Ys
CL＝50pF
5.0
-
220
传输延迟时
ST → YGS
RL＝200k
10.0
110
间
tr＝20ns
15.0
85
ST → Ym
tf＝20ns
5.0
-
340
In → YGS
10.0
170
15.0
125
In → Ym
5.0
-
300
10.0
引出端功能符号
I0～I7 ST VDD Vss Y0～Y2 YGS Ys
数据输出端 选通输出端 正电源 地 编码输出端 组选通输出端 选通输出端
功能表
电子发烧友
静态特性：
参数
测试条件
规范值
V0
V1 VDD -55℃ -40℃ 25℃ 85℃ 125℃
9.5 10/0 10.0 -1.6 -1.5 -1.3 -1.1 -0.9
13.5 15/0 15.0 -4.2 -4.0 -3.4 -2.8 -2.4
IOL 输出低电平电流 0.4
5/0 5.0 0.64 0.61 0.51 0.42 0.36
（最小）
0.5 10/0 10.0 1.6 1.5 1.3 1.1 0.9
1.5 15/0 15.0 4.2 4.0 3.4 2.8 2.4
I1 输入电流
-
15/0 15.0
±0.1
±1.0
IDD 电源电流
-
5/0 5.0
5.0
5.0
150.0
（最大）
10/0 10.0 10.0 10.0
300.0
15/0 15.0 20.0 20.0
600.0
动态特性（TA＝25℃）：
电子发烧友
8 线－3 线优先编码器
CC4532
简要说明
逻辑符号
CC4532 可将最高优先输入 I7～I0 编码为 3 位二
进制码，8 个输入端 I7～I0 具有指定优先权，I7 为
最高优先权，I0 为最低。当片选输入 ST 为低电平
时，优先译码器无效。当 ST 为高电平，最高优先