汉王e典笔培训说明

合集下载

汉王说明书

篇一：汉王 ocr 使用说明书汉王ocr 使用说明书1．打开文件：选择“文件”菜单，选择打开图像文件的路径，图像文件便显示在管理区用鼠标可将图像文件拖拽到管理区，也可将打开的图像页复制、粘贴到管理区。

2．删除文件：按键盘上的“delete”键将文件删除。

3．调整文件：选中一个文件或按住ctrl可以选择多个文件，把文件拖放到要调整的位置。

4．文件格式：本系统支持tif、bmp、pdf，彩色灰度图还支持jpg格式。

5．文件语言：本系统支持中文简体、英文、简繁体混排方式、以及中英文混排方式。

6．图像文件重命名：选中文件，点击文件菜单选择可保存成tif、bmp、jpg文件（说明：本系统不支持批量图像文件的改名）。

7．图像文件保存路径：在中可以设置获取图像文件的路径、名称、格式。

如该路径不存在，系统会提示是否创建该路径；如果要选择已存在的某个路径,可以点击“扫描到”按钮，弹出选择路径对话框，选择需要保存图像的路径。

侯选字区：修改识别结果时，可以选择侯选区的字直接修改当前字。

识别结果区：显示当前图像文件的识别结果。

原图像区：显示当前正处理的图像。

搜索区：百度、google搜索。

获取图像获取图像获取图像有四种方式：通过点击工具栏上的按钮打开已扫描好的图像文件；通过扫描仪批量扫描文稿；用鼠标将图像文件拖拽管理窗口；将打开的图像文件复制、粘贴到文件管理器中。

扫描文稿时，先准备好扫描仪，点击工具栏上的进入扫描程序，将要扫描的稿件放置在扫描仪的适当位置上，屏幕上显示扫描仪配置窗口（这里以扫描仪av620c为例）。

在扫描之前，可以通过扫描窗口选择扫描精度、扫描方式和纸张大小。

本系统支持黑白二值模式、灰度模式以及彩色模式，即选择黑白扫描方式、灰度扫描方式和彩色扫描方式。

建议不要大量采用灰度、彩色扫描模式扫描文件，因为彩色图像文件占用大量的内存和cpu，操作速度会很慢；而且背景图案会影响处理效果。

扫描亮度亮度选择是否恰当直接关系到图像的清晰度，而图像的清晰度又直接影响后续的识别质量，因此必须根据稿件的实际质量来选择亮度。

汉王笔使用说明书

汉王笔是软件、硬件结合的多功能识别产品，由汉王笔软件、汉王手写板、手写笔等组成。

技术支持信息全国服务电话：400-810-8816服务信箱：****************.cn汉王科技股份有限公司网址：可以从汉王科技官方网站下载新版软件和完整版使用说明书。

请在微信公众号中查找“汉王服务”并关注，或直接扫描上方二维码加关注，可在线咨询产品问题、查询保修收费政策、维修进度等。

关注后绑定产品（保修期内），即可获赠延长三个月保修服务，详情请咨询在线客服。

外观手写板正面示意图手写笔示意图连接到计算机从包装中取出汉王笔后，将手写板连接到计算机USB接口。

（若手写板机身无USB数据线，请先从包装中取出USB数据线，连接到手写板上。

）安装驱动程序注意：仅适用于配有驱动程序的汉王笔产品，免安装版汉王笔或无驱动产品无需此操作。

1.将手写板连接到计算机USB端口上；2. 将驱动光盘插入DVD-ROM等光驱设备中，或将随机U盘插入计算机USB端口；3.系统将自动弹出安装界面，点击“安装驱动”按钮，开始驱动程序安装。

如果AutoRun文件没有启动，也可通过文件浏览选择U盘所在目录，打开Drivers目录，点击目录中“Setup.exe”，安装驱动程序。

4.稍候，“选择设置语言”窗口弹出，请您选择语言后点击“下一步”；5.您将会看到准备安装程序窗口，点击“下一步”；6.您将会看到用户许可协议窗口，请详细阅读。

选择“是”，继续驱动安装；选择“否”，退出安装程序；7.点击“安装”，开始安装驱动；8.等待安装完成；9.安装完成后，点击“完成”重新启动计算机即可完成驱动安装。

安装汉王笔软件注意：免安装版汉王笔产品无需此操作。

如果随机附赠U盘，推荐运行安装程序将手写软件安装到计算机，可以获取所有软件功能。

1.将手写板连接到计算机USB端口上；2.将驱动光盘插入DVD-ROM等光驱设备中，或将随机U盘插入计算机USB端口；3.系统将自动弹出安装界面，点击“安装汉王软件”按钮，开始软件安装。

汉王电子白板使用,学做课件《找规律》

学做课件《找规律》，培训讲稿
今天继续给大家介绍汉王电子白板系统的使用，欢迎各位能一如既往地喜欢我和我的课程。

这节课，我想通过一节算是示范课的形式给大家介绍一下电子白板的使用吧。

课件用到工具：
1、插入“图形”工具，“填充”工具，“纹理笔”工具，其中在使用“纹理笔”制作一个“纹理”时需要向回拖一拖，就变为一个了。

２、同时，用到了复制与粘贴功能，排列好“对象”，注意这些对象是可以交互移动的。

这是这节课的关键。

３、再有，课题“找规律”加注了拼音功能。

４、演示本电子白板课件时要用到“拉幕”工具来吸引孩子们注意力。

５、使用字幕工具。

要求在屏幕上出现如下字幕“同学们，你发现了什么”
重点突出：交互性即可以让学生操作。

操作过程：
１、字幕出示
２、拉幕显示
３、交互操作
重点讲解，课件制作过程，培训大家用白板，如何用白板。

汉王笔通用使用手册

目录第一篇汉王笔 (1)第一章汉王笔特点 (2)第二章汉王笔快速入门 (3)第一节汉王笔的使用 (3)第二节汉王手写窗口 (4)第三节汉王全屏幕 (7)第四节英文单词输入 (12)第五节汉王随手写 (12)第六节汉王魔格输入 (16)第三章系统功能 (23)第一节用户管理 (23)第二节系统设置 (24)第三节用户学习功能 (30)第四节速写字串学习 (34)第五节英文单词学习 (36)第四章实用工具 (37)第一节短语文摘 (37)第二节手写签名 (41)第三节汉王输入工具 (42)第二篇汉王亲笔精灵 (46)第五章亲笔精灵 (46)第一节Outlook亲笔信 (46)第二节MSN亲笔聊天 (50)第三节QQ亲笔聊天 (51)第三篇汉王聊天圣手 (53)第六章聊天圣手 (54)第一节快速入门 (54)第二节主菜单 (55)第三节聊天界面 (55)第四节文字输入 (56)第五节输入工具 (57)第六节聊天经典用语 (57)第四篇汉王事务通 (59)第七章事务通总述 (60)第一节多用户 (60)第二节主界面 (60)第八章事务通详解 (64)第一节日程 (64)第二节任务 (69)第三节便笺 (72)第四节日记 (73)第五节文件箱 (76)第六节留言 (78)第七节回收箱 (79)第八节记录内容输出 (79)第五篇汉王阅读精灵 (80)第九章阅读精灵 (80)第一节直接阅读 (80)第二节文件阅读 (81)第三节朗读到文件 (81)第四节设置阅读精灵 (82)附录一手写板按键使用说明 (83)附录二手写板维护 (84)第一篇汉王笔汉王笔是由软、硬件相结合的联机手写汉字输入识别系统，使用者只需按照自然的书写习惯在手写板上写字，计算机就可准确无误的将手迹识别为标准印刷体汉字。

系统具有联想、签名、绘图、保留手迹、替代鼠标等功能。

全面支持GBK字符集和国标GB18030最新汉字字符集，可混合识别简体、繁体、常用异体字近3万字，除能识别正楷、连笔、倒插笔外，另外还独创行书、草书的识别，最新增加英文单词连笔书写，整体技术性能处于国际领先水平。

Parker Hannifin 熟练培训指南说明书

Introduction ...................................................................................................................................................... E2Training MaterialsTextbooks/Course ComponentsIndustrial Hydraulic Technology ............................................................................................................. E3Hydraulic Maintenance Technology ........................................................................................................ E3Fluid Power Basics................................................................................................................................ E4Hydraulic Component Sizing ................................................................................................................. E4Filtration T echnology .............................................................................................................................. E5Hydraulic Pumps & Controls ................................................................................................................. E5Reference BooksDesign Engineers Handbook ................................................................................................................. E6Design of Electrohydraulic Systems for Industrial Motion Control .......................................................... E6Handbook of Electrohydraulic FormulaeE6An Engineering Analysis of the Pulse Width Modulation ........................................................................ E7Lexicon III ............................................................................................................................................. E7Computer SoftwareVCCM Design Environment ................................................................................................................... E8Video TrainingIndustrial Hydraulic Technology ............................................................................................................. E9Trainer StandsPortable Hydraulic Trainer .................................................................................................................... E10Lab Manuals........................................................................................................................................ E10Training ProgramsIndustrial Hydraulic Technology (IHT) .......................................................................................................... E11Hydraulic Component Sizing (HCS) ............................................................................................................. E11Hydraulic Pumps & Controls (HPC) ............................................................................................................. E12Hydraulic Maintenance Technology (HMT) ................................................................................................... E12Introduction to Electrohydraulics (EHD)....................................................................................................... E13Electrohydraulic Feedback Systems (EFS)................................................................................................. E13Cartridge Valve Systems (CVS) .................................................................................................................. E14Mobile Hydraulic T echnology (MHT) ............................................................................................................ E14ContentsIntroductionW elcome to Parker’s Involvement Training ProgramThe Training Department at Parker Hannifin was established in the early 1970’s and is recognized today as the industry leader in the development and presentation of training materials and programs. The Department’s charter states that the primary focus of activity shall include all phases of technical training for hydraulic and pneumatic industries. The charter also states that this would be non-commercial and involve state-of-the-art methodology.The Parker approach is one of involvement training. In its full scope, involvement training is one of active participation. This participation results in excellent student retention as well as providing a comfortable way of learning.Parker Catalog 0200 details the Training Department’s current offerings. This catalog is presented in two parts: Training Materials and Training Programs.Training MaterialsThe training materials section contains the following mixed media components:T extbooks/Course ComponentsReference BooksComputer SoftwareVideo T apesTrainer StandsMiscellaneousParker offers seven textbook and course combinations designed for both industrial and educational applications. T opics range from Basic Fluid Power to the specifics of Hydraulic and Pneumatic T echnology.All materials needed for a completeclassroom curriculum are available.T extbooks can be purchasedseparately or in combination with anynumber of additional coursecomponents including workbooks,instructor guide, multiple choiceexams, answer book, coursecertificates and, where appropriate,acetate transparencies and relevantreference books.Parker currently has six referencebooks available. Led by the DesignEngineer’s Handbook, all of thebooks are valuable tools for anyDesign Reference Library, whetherfor individual use or as anaccompaniment to the courses.Additionally, course subject mattercan be further enhanced with relatedcomputer software, video tapes andtrainer stands.Parker’s computer-aided softwarerepresents a strong commitment toadvanced training technology. TheBasic Pneumatic Training CD,featuring animation and video, is theleading pneumatic software in theindustrial market place.The video tape library contains fourcomplete modules for self-pacedone-on-one or group learningactivities. Both hydraulic andpneumatic training programs areavailable.Parker’s portable and full sizehydraulic, pneumatic, and pick-n-place trainer stands provide studentswith valuable hands-on experience.All training stands feature industrialgrade components and provide “RealWorld” applications of principles andcircuitry.Training ProgramsIn addition to training materials,Parker offers an on-going scheduleof classroom educational programs.The current list of classes includesten 3-5 day programs. Each class isled by a Parker certified instructor(s).Students are provided all necessarymaterials to attain course certification.Classes are held in strategiclocations across North America.See Catalog 0200 for a complete listof scheduled class locations.Course fees cover all class roomexpenses. Meals, transportationand lodging are not included.However, Parker will be glad to assistyou with lodging arrangements.Education and training arecontinuous processes. Parker’sInvolvement Training Program hasdoubled its offerings in the last threeyears alone. For the latestinformation on Training Materials orPrograms, please contact:Parker Hannifin CorporationTraining Department6035 Parkland Blvd.Cleveland, OH 44124-4141T el:(216) 896-2577Fax:(216) 514-6738E-mail:*****************.comThe following section gives abrief overview of the trainingmaterials and classes with ahydraulic or electrohydraulicemphasis.INDUSTRIAL HYDRAULIC TECHNOLOGY Industrial Hydraulic Technology2nd Edition, Bulletin 0232-B1ISBN 1-55769-025-1The Industrial Hydraulic Technology textbook is designed to introduce a student to hydraulics as it relates to industrial machinery. The 330-page text is organized into fifteen chapters which include:The Physical World of a MachineHydraulic Transmission of Force and Energy Petroleum Base Hydraulic Fluid Fire Resistant Hydraulic FluidOperation at the Suction Side of a Pump Hydraulic ActuatorsControl of Hydraulic EnergyCheck Valves, Accumulators and Cylinders Flow Control ValvesDirectional Control Valves Pressure Control ValvesPilot Operated Pressure Control Valves Hydraulic Pumps Hydraulic MotorsReservoirs, Coolers and Filters• Circuit illustrations are in six-color to aid the student in visualizing what is happening in a circuit.• Each chapter incorporates an exercise reviewing the lesson’s main points.HYDRAULIC MAINTENANCE TECHNOLOGYHydraulic Maintenance TechnologyBulletin 0240-B1ISBN 1-55769-019-7The Hydraulic Maintenance Technology textbook provides detailed maintenance and troubleshooting information for the user of industrial hydraulicequipment. The 148-page text contains ten chapters which include:Hydraulic Maintenance Introduction Hydraulic Graphic Symbology Power Unit Maintenance Pump MaintenancePressure Control Valve Maintenance Directional Control Valve MaintenanceFlow Control Valve and Check Valve Maintenance Cylinders, Motors and Accumulator Maintenance Leakage Elimination in Hydraulic Systems Fluids and Filter Maintenance• Contains troubleshooting charts with lists of common problems, causes and possible remedies.• This text is also a valuable reference for designers of industrial hydraulic equipmentHYDRAULIC COMPONENT SIZINGHydraulic Component SizingBulletin 0243-B1ISBN 1-55769-036-1The Hydraulic Component Sizing textbook provides an in-depth practical study of pumps, flow valves, pressure valves, directional valves, hydraulic motors, cylinders and accumulators and how total system performance is related to individual component characteristics. Filtration and overall heat generation is covered. The 244-page text is organized into eleven chapters which include:The Hydraulic System Cylinders and Motor The Electric MotorSources of Power - Pumps and Accumulators Check Valves and Directional Control Valves Unloading and Pressure Reducing Valves Reliefs, Counter Balances and Brake Valves Flow ControlsConditioning Systems - Reservoirs and Heat Exchangers Conditioning (Filters)Fluid Conductors• The text also includes a section of 17 assignments in the back of the book.FLUID POWER BASICSFluid Power BasicsBulletin 0239-B1ISBN 1-55769-029-4The Fluid Power Basics textbook is designed tointroduce students to hydraulics and pneumatics as it relates to industrial machinery. The 174-page text is organized into fifteen chapters which include:The Physical World of a Machine Force Transmission Through a FluidEnergy Transmission Using a Hydraulic System Control of Hydraulic EnergyEnergy Transmission Using a Pneumatic System Control of Pneumatic EnergyHydraulic Pumps and Compressors Check Valves, Cylinders and Motors Flow Control ValvesDirectional Control ValvesSimple Pressure Control ValvesPilot Operated Pressure Control Valves Hydraulic Fluid Conditioning Air PreparationFluid Conductors and Connectors• Each chapter incorporates an exercise reviewing the lesson’s main points.FILTRATION TECHNOLOGY Filtration TechnologyBulletin 0247-B1 (Softcover)ISBN 1-55769-037-5Bulletin 0250-B1 (Hardcover, Not Shown)ISBN 1-55769-033-2Filtration Technology is a must as a fundamental introduction to industrial filtration. The text covers topics such as fluids, contaminants, media selection and more. It is helpful to all personnel concerned with OSHA, safety and quality issues. This over 250-page text is organized into fourteen chapters which include:Introduction to Industrial Filtration Technology Fluids and Contaminants Contamination Dynamics Fluid and Filter AnalysisMultipass Filter and Media Selection Lubricant and Hydraulic FluidSpecifying Hydraulic and Lubricating Fluid Filters Water Absorption in Hydraulic and Lubricating Oils Filter and Media Selection for Single-pass Systems Fuel Filter/Water Separators Process Filtration SystemsCompressed Air and Gas Filtration Coolant FiltrationInstallation, Operation and MaintenanceHYDRAULIC PUMPS & CONTROLSHydraulic Pumps & ControlsBulletin 0238-B1ISBN 1-55769-031-6Hydraulic Pumps and Controls is a comprehensive text covering relevant pump topics from basic pump construction and operation to multiple controls,horsepower control and electronic pump controls. The book also contains sections on filtration andtroubleshooting. This 185-page, multi-colored text is organized into nine chapters which include:Pressure CompensationLoad Sensing Theory of Operation Input Power and Inlet Conditions Electrohydraulic Pump Control TroubleshootingRemote CompensationHorsepower (Torque) Limiting Control Hydraulic Filtration Energy ConservationDesign Engineers HandbookBulletin 0224-B1ISBN 1-55769-018-9Design of Electrohydraulic Systems for Industrial Motion Control, 2nd EditionBulletin 0246-B1ISBN 1-55769-032-4A hardcover 400-page text that covers all technical areas relative to motion control utilizing electrohydraulics.Technicians and designers, as well as mechanical,electrical and control engineers will find the text to be a useful tool. The text is also valuable for professors and students of motion control technology, because it provides the most current information available on this technology from a recognized expert.To satisfy the demand for a simple and practical treatment of hydraulics and pneumatics, including components and system connectors, Parker Hannifin Corporation has published a one volume, 320-page text entitled Design Engineers Handbook . The information contained in this text is organized to assist themachine designer and manufacturer, as well as service and maintenance personnel. It should prove to be equally valuable to the college and vocational school student preparing to enter any of these fields.• Each section includes design data, reference material, charts and diagrams.Handbook of Electrohydraulic Formulae, 2nd EditionBulletin 0242-B1ISBN 1-55769-034-0This handbook, written for technicians, engineers and designers, contains 25 chapters of commonly used formulas for the design of electrohydraulic motion control systems. All of the necessary information is centralized, making the design of electrohydraulic motion control systems easier. There is no other text available that offers this accessibility or breadth and depth of information.Lexicon IIIBulletin 0245An Engineering Analysis of the Pulse Width ModulationBulletin 0244This research report contains over 100 pages of detailed engineering information and data regarding the design and evaluation of the pulse width modulation (PWM)method of controlling hydraulic pump outlet pressure.PWM offers a very efficient way for making regulated pressure power units using fixed displacement pumps instead of the more expensive, conventional pressure compensated pumps.The report contains scores of graphical responses,representing hundreds of hours of labs and dataanalysis time. Concise Conclusions sections help the reader to quickly summarize the results and apply them immediately. A complete section is dedicated to Design Methodology so that users can learn the details needed to properly design and construct the power units.Also included is a background on motion control and constant pressure. In addition, authors discuss equipment and principles of operation as well as the method of investigation used.An Engineering Analysis of the Pulse Width Modulation is a must for anyone who uses, specifies, designs or builds hydraulic power units!The Lexicon III is a detailed bulletin of electrohydraulic terms and analogies. The book is laid out into two easy-to-use sections – a glossary of terms and a section on understanding electrohydraulic analogies. Many of the areas are represented by graphs and diagrams to further identify in detail the terms and analogies of electrohydraulics.The author conveniently includes a chart of the SI prefixes, the Handy Conversions Factors T able and a listing of the Greek Letters. This bulletin is a must-have for engineers, students and anyone interested in electrohydraulics.Training MaterialsComputer SoftwareVCCM Design EnvironmentBulletin 0298-P1The manual design of proportional and servo controlled systems requires many hours of computational work as well as much trial and error. Now, with the easy-to-use VCCM software, your can design state-of-the-art motion control systems at the cutting edge of technology!Simply tell VCCM the requirements of your job, and it will tell you the components you need for your design.All data passes through several menu driven screens which may carry explanations that are written in electrohydraulic engineering terms. VCCM does the number crunching for you, leaving you free toconcentrate on the more subjective and critical aspects of the design application. Anyone who has to size and select servo and/or proportional valves will benefit from the VCCM program.Requirements:• 386 CPU with DOS• 2 MB of Space on Hard Drive • SVGA monitor • Windows optionalIndustrial Hydraulic TechnologyBulletin 0299-T1The Industrial Hydraulic Technology course material is available utilizing an audiovisual tape training method.With all the training information stored on cassettetapes, the training sessions can be repeated as often as necessary, allowing each student to acquire the technical knowledge at his or her own pace.The various tapes focus on enabling the user to interpret and read schematics, obtain a working knowledge of components that make up hydraulic systems andadvance to trouble shooting techniques. (Refer to page 4 to see specific chapters covered).• Video tapes are available in Beta, VHS or PAL.• Individual chapters are also available.Includes:14 Video T apes 1 T extbook1 Instructor’s GuideTraining MaterialsVideo TrainingBulletin 0249EHD SupplementBulletin 0231Also available in Spanish!Bulletin 0229-B9 In order to aid the student in understanding hydrauliccomponents and systems operation, Parker hasdeveloped this comprehensive lab manual for the ModelHTV-00 Portable Hydraulic Trainer Stand. This manualcontains circuit problems and demonstrations designedfor use with the Parker trainer. These exercises areintended to supplement text material covered in theclassroom. References are made in this manual toParker textbook, Industrial Hydraulic T echnology (pageL3).Contains exercises using theElectrohydraulic Option Kit(P/N 875279) on the ParkerPortable Hydraulic TrainerStand.Portable Hydraulic TrainerBased on Parker’s long term experience indesigning, manufacturing and servicing fluidpowercomponents worldwide, the Portable HydraulicTrainer is designed to be a tool for learning hydraulictechnology principles and circuitry. It has beenengineered for ruggedness, portability and ease ofoperation. The unit is completely self-containedand operates on standard 115 Volt AC single phaseoutlet electrical power.The components on the trainer are all industrialgrade components used in industry every day. This“real world” approach allows the student to learnwhat those components look like as well as howthey operate.All necessary connections are made with hosesand quick disconnects. No tools are required toarrange circuits. Simply plug in the componentsneeded to arrange a circuit. In addition, all thehoses are stored are stored in a rack to avoidmisplacing “loose” components.For detailed information, request Bulletin 0203Training MaterialsTrainer Stands and Lab ManualsAlso available with the following options:• Electrohydraulic option provides an introduction toboth open loop and closed loop electrohydraulicsystems.• Pneumatic option transforms the hydraulic trainerinto a complete fluidpower training stand.。

汉王在线式考勤管理系统使用说明(CS版)

汉王考勤管理系统操作手册目录汉王考勤管理系统操作手册 (1)一、安装指南 (2)二、系统登陆 (3)三、考勤管理 (4)1、部门管理 (4)2、人事资料 (5)3、员工异动 (7)5、离职员工维护 (9)6、考勤机管理 (10)7、考勤数据下载 (12)8、U盘管理 (13)9、考勤规则 (14)10、排班设置 (18)11、数据排序 (24)12、数据处理 (25)13、年假管理 (25)14、手工补卡登记 (26)15、公出请假登记 (27)16、加班登记 (28)17、出勤记录查询 (29)18、考勤报表 (29)四、系统管理 (34)1、参数设置 (34)2、数据库管理 (35)3、操作员管理 (36)4、操作日志 (37)一、安装指南●软件的安装安装软件之前建议关闭其他正在运行的应用程序，这样有助于避免在安装过程中发生冲突。

将安装光盘放入光驱，安装程序会自动运行，按照提示完成安装的所有配置。

安装完成之后单击结束就可以完成整个安装流程。

安装完成之后桌面上自动增加捷方式《汉王考勤管理系统》，再次进入程序时，只需在桌面上单击该图标即可。

本系统使用Microsoft SQL Server数据库。

●软件的卸载如果您不需要再使用此软件，并希望从计算机中删除掉，则可执行以下操作：退出《汉王考勤管理系统》，进入开始---控制面板---添加/删除程序卸载数据库：选择《Microsoft SQL Server Desktop Engine》项目，点击删除。

卸载考勤软件：选择《汉王考勤管理系统》，点击删除，就可以卸载软件了。

二、系统登陆登陆界面如下：系统只有设置超级管理员后，系统才会提示用户登陆窗口，输入用户名、密码后进入；选择考勤月份考勤系统默认查询本月考勤数据，如上选择表示查询2008年3月份考勤数据、报表；如果考勤是跨月的比如：从3.10到4.9号，请在考勤管理-考勤规则设置月份的起始日期；第一次进入新的考勤月份时，如果上个月的有排班，系统会自动的将上月的排班表导入本月的排班表中；对于规律的班次（按天、周为排班周期的），系统会自动连接上月的班次；如果本月的班次表跟上月的不一致，可以在排班设置中重新修改；三、考勤管理1、部门管理用于管理公司的部门组织结构。

汉王手写电脑的使用方法-概述说明以及解释

汉王手写电脑的使用方法-概述说明以及解释1. 引言1.1 概述概述：汉王手写电脑是一种创新的科技产品，它结合了传统手写方式和现代电子技术，为用户提供了更加便捷和灵活的使用方式。

与传统的键盘输入相比，汉王手写电脑使得用户可以直接使用手写笔在屏幕上书写文字、数字和图表。

这一技术的引入使得用户能够更加自如地表达思想，提升了用户的使用体验。

汉王手写电脑的使用方法简单易懂，无需复杂的操作步骤，用户只需要将手写笔轻轻触碰屏幕，即可开始书写。

不仅如此，汉王手写电脑还支持手写体的识别和转换，用户可以将手写文字轻松地转化为电子文档，实现电子化保存和共享。

除了基本的手写输入功能，汉王手写电脑还提供了丰富的高级功能。

用户可以通过手写快捷命令实现快速的操作，例如撤销、复制、粘贴等。

此外，汉王手写电脑还拥有拓展功能，用户可以根据自身需求安装各种应用软件，使得手写电脑成为工作、学习和娱乐的多功能工具。

汉王手写电脑在教育、商务和创作领域有着广泛的应用前景。

在教育方面，汉王手写电脑的便捷性和直观性可以帮助学生更好地理解和记忆知识点，并提升他们的学习兴趣。

在商务领域，汉王手写电脑可以用作会议记录和演示工具，提高会议效率和沟通效果。

在创作领域，汉王手写电脑的直观输入方式可以激发艺术家的创作灵感，让他们能够更加自由地表达想法和情感。

展望未来，汉王手写电脑有着巨大的发展潜力。

随着科技的不断进步和用户需求的不断提升，我们可以预见到汉王手写电脑将会不断升级和创新，为用户提供更加丰富和高效的使用体验。

同时，我们也期待更多的应用场景和领域能够受益于汉王手写电脑的技术，推动科技进步和社会发展。

【1.2 文章结构】本文将分为三个主要部分进行介绍。

首先，在引言部分，将概述汉王手写电脑的背景和相关信息，并说明本文的目的和结构。

其次，在正文部分，将详细介绍汉王手写电脑的基本操作和高级功能。

最后，在结论部分，将对文章进行总结，探讨汉王手写电脑的应用前景，并提出建议和展望。

汉王笔使用手册说明书

汉王笔使用手册汉王科技股份有限公司本手册能帮助您熟练使用汉王软件。

如果您没有使用经验，请在使用前详细阅读本说明。

使用手册前应注意的重要事项●本手册仅包括汉王科技股份有限公司的部分软件说明。

●本手册介绍章节内容如有超出产品范围的请跳过阅读，以产品为准。

●为加强本产品的正确性、设计及功能，制造商可能不另行通知即更新文件中信息，请以产品为准。

●汉王科技股份有限公司保留所有权。

除非出于纯粹个人使用目的，否则不得拷贝本手册的任何部分。

●汉王科技股份有限公司保留对本说明书的最终解释权。

目录第一篇汉王笔 (1)第一章汉王笔特点 (2)第二章软件安装与卸载 (3)第一节系统要求 (3)第二节汉王软件安装 (4)第三节汉王软件卸载 (7)第三章汉王笔快速入门 (9)第一节汉王笔的使用 (9)第二节汉王手写窗口 (10)第三节汉王全屏幕 (16)第四章系统功能 (22)第一节系统设置 (22)第二节学习库管理 (29)第三节速写字串学习 (34)第四节英文词学习 (35)第五章实用工具 (37)第一节短语文摘 (37)第二节手写签名 (42)第三节汉王键盘 (44)第二篇汉王软件 (49)第六章输入工具 (49)第七章阅读精灵 (54)第一节直接阅读 (54)第二节文件阅读 (55)第三节朗读到文件 (55)第四节设置阅读精灵 (56)附录一手写板维护 (58)附录二软件许可协议 (59)附录三保修协议 (60)附录四技术支持信息 (61)附录五有害物质含量表 (62)第一篇汉王笔第一篇汉王笔汉王笔是由软、硬件相结合的联机手写汉字输入识别系统，使用者只需按照自然的书写习惯在手写板上写字，计算机就可准确无误的将手迹识别为标准印刷体汉字。

系统具有联想、签名、绘图、保留手迹、替代鼠标等功能。

全面支持GBK字符集，可混合识别简体、繁体、常用异体字近3万字，除能识别正楷、连笔、倒插笔外，另外还独创行书、草书的识别，整体技术性能处于国际领先水平。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

汉王e典笔培训说明
一、硬件介绍
1、电源：长按电源键，打开/关闭设备
2、Reset键：重启设备（建议在死机时使用）
3、四维方向键：移动方向键，实现焦点切换
4、Ok键：用于确定操作。

5、返回键：用于退出当前界面或取消。

6、显示屏：具有触摸功能，可以用于输入文字
等。

7、耳机插孔：连接耳机。

8、Usb接口：用于连接电脑，复制扫描到的文字。

用于充电。

9、扫描触发管脚：自动触发光学感应器开始扫
描
10、喇叭：播放声音
11、录音麦克：用于录音
设备的总可用容量约为：7ＧＢ
二、基本设置
日期：主菜单—系统设置—日期—设置为当前日期
摘抄设置为中文：主菜单—资料摘抄—摘抄设置—语言选择—中文（可以识别中英文混合排版）。

三、资料摘抄
本功能可以实现将文字扫描识别并存为电子稿。

扫描到的文字将以日期命名，以TXT的格式存放在【优盘：汉王资料摘抄】中的【scanfile】文件夹中。

操作方法：
以右手握笔，扫描中文稿件为例。

扫描前请确保汉王e典笔已正常开启，并取下笔帽，进入资料摘抄，选择“新建文件”，按下“OK”键进入资料摘抄界面，在待扫描纸张上按下扫描触脚，扫描灯正常亮起。

扫描识别时，请在一行扫描识别显示后再扫描下一行。

1、像平常握笔一样握住e典笔，握笔时有扫描触发管脚
的一侧位于靠近拇指与食指的虎口一侧。

2、将笔的尖端放置到需要扫描的第一个字符前约半个字
符处，扫描窗口的中央对准需扫描行的中线。

3、将欲扫描的文件，平放于桌面，将需要扫描的文字行
对齐e 典笔扫描窗口的中央，然后将e典笔轻轻压下，扫描
灯亮起时平滑拖拉笔划过文字。

抬起笔所划过的文字立即被识别，并显示在屏幕上。

扫描注意事项：
1、对手写字体，数学符号识别率很差。

基本只能用于扫描中英文标准印刷体（宋体，楷体等）。

2、汉王e典笔可以扫描六号到二号范围内的文字，以下背景和文字颜色不可扫描：蓝底黑字、黑底蓝字、黑底红字
3、为了保障数据安全性，请勿直接编辑【NewWord】和【Scanfile】目录下的文件。

如果您需要编辑文件，请拷贝至电脑硬盘后编辑。

4、连接电脑时，选择【U盘模式】，就可以查看到本设备的两个U盘：【优盘：汉王资料摘抄】，【优盘：汉王电子词典】。

四、电子词典
本功能用于英语阅读时查看词典等，并有发音功能。

主菜单中进入电子词典，可以选择英汉翻译功能，自动选用了牛津高阶词典。

方法一：直接扫描英文单字或句子，出现翻译界面。

翻译界面分上下两部分，上部分为扫描到的文本，下部分为显示高亮单词相应的翻译意思。

可使用左右方向键移动选择需要释义单词，下方就会出现该单词的解释，可以按【ok】键发音。

按上下键查看更多解释内容。

方法二：可单击屏幕右上角的【笔触按钮】，进入输入状态，直接输入英文或中文，单击【ok】键，查看该单词的释义。

五、录音机功能
本功能可用于老师外出听课录音。

默认录制格式为MP3的音频存放在：【优盘：汉王电子词典】下的【e_Recorder】文件夹中。

在主菜单中将光标移动到“录音机”，按“OK”键，进入录音机界面，可实现录音、播放录音、删除录音、播放音乐和录音设置功能。

进入【录音】，单击【ok】即开始录制音频，单击【返回】键完成录音。

六、其他功能
1、听力练习功能
用于收听MP3音频，支持lrc字幕。

2、证据翻译功能
用于英中和中英整句翻译功能，可实现连续扫描一段话在进行翻译。

3、充电：
USB线连接电脑，充电时机估计3小时。

4、更多详细说明请参见《汉王e典笔使用手册》。