广东大明拉斐电气有限公司招商手册

合集下载

人民电器水晶系列选型手册 DZ15系列塑料外壳式断路器(透明壳) 产品资料说明书

⽔晶系列选型⼿册CRYSTAL SERIES SELECTION MANUAL人民电器集团是人民控股集团全资公司，中国500强企业之一，始创于1986年。

人民电器集团以工业电器为核心产业，拥有浙江、上海、南昌、抚州、枣庄、合肥六大制造基地、35家全资子公司150家控股成员企业、1500多家加工协作企业和5000多家销售公司。

产品畅销全球125个国家和地区，广泛应用于浦东机场、京沪高铁、三峡水电、北京地铁、奥运场馆南水北调、青藏铁路、嫦娥探月工程、越南太安水电枢纽等国内外重大工程项目，位居世界机械企业500强前列。

2023年，经世界品牌实验室测评，品牌价值788.15亿。

一站式透明外壳断路器解决方案工地配电首选为全面支持全国复产复工建设需要，现针对透明壳产品，进行促销让利活动，详情敬请垂询当地授权代理商。

短路保护过载保护隔离保护漏电保护透明可视由于建筑工地用电环境的复杂性及特殊性，加上大多数的作业人员刚由农民转变而成，安全用电意识较差，以及用电设备的多样性、安全措施的不完备使建筑工地的电气事故增加，安全用电形式非常严峻。

常规产品在内部的触头熔焊，或粘连时，虽然开关处于分闸状态，实则依旧线路依旧导通，用户不易发现。

在停电时还会使停电线路带电。

会危及施工维护人员的安全。

透明断路器的好处是它在拉闸停电时你可以直观的看到断路器内部的断开点。

概述施工现场用电需求分类总配电箱、分配电箱、开关箱三级控制。

应用方案-总配电箱应用方案-分配电箱应用方案-开关箱三级控制RDM1400ARDM1 160ARDM1 160A6-8路RDM1 100A 3PRDB5T 63A 3P 水电RDB5T 63A 3P 消防RDB5T 40A 3P 备用RDB5T 63A 3P 备用RDM1系列塑料外壳式断路器RDM10系列塑料外壳式断路器DZ20系列塑料外壳式断路器DZ15系列塑料外壳式断路器RDL20系列漏电断路器DZ15LE系列漏电断路器RDM1L系列漏电断路器RDL18系列漏电断路器RDB5T-63、RDB5TLE-63系列小型断路器RDH5系列隔离开关HR6熔断器式隔离开关01 11 16 21 24 27 31 39 41 47 49Contents/01选型指南产品概述RDM1系列塑料外壳式断路器具有体积小、分断能力高、飞弧短、抗震动的特点, 是陆地及船舶使用的理想产品。

一体化强电轻触开关[实用新型专利]

专利名称：一体化强电轻触开关专利类型：实用新型专利
发明人：程雪忠
申请号：CN201621270004.2申请日：20161125
公开号：CN206293320U
公开日：
20170630
专利内容由知识产权出版社提供
摘要：本实用新型公开了一体化强电轻触开关，包括装饰面板、前盖框、安装板、开关按键、开关中盖、按键线路板、控制线路板和后座壳，装饰面板固定在前盖框的上表面，安装板固定在前盖框的背面，开关按键安装在开关中盖上，按键线路板与控制线路板电性连接，按键线路板位于控制线路板的上方，控制线路板安装在后座壳内；还包括控制线路板盖板，该控制线路板盖板与后座壳的顶端连接，开关中盖与控制线路板盖板可拆卸连接，控制线路板盖板还与安装板可拆卸连接。

开关按键、开关中盖、按键线路板、控制线路板盖板、控制线路板和后座壳形成为一个电位模块，将该电位模块整体与安装板装配，形成一体化结构，大大降低产品占用空间，并且部件减少，装配次数少。

申请人：广东大明拉斐电气有限公司
地址：528313 广东省佛山市顺德区陈村镇白陈公路南涌路段西锦龙工业小区3号之七
国籍：CN
代理机构：广州市越秀区哲力专利商标事务所(普通合伙)
代理人：罗峰
更多信息请下载全文后查看。

拉雷尔电子有限公司产品说明书

LAUREL ELECTRONICS, INC.Ethernet & 4-20 mA Output Transmitterfor DC Voltage or CurrentStandard Features•±0.2, ±2, ±20, ±200, ±300V and ±600V voltage input ranges•±2, ±20, ±200 mA and ±5A current input ranges•All input ranges user selectable and factory calibrated•4-20 mA or 0-10V transmitter output, jumper selectable, isolated•Analog output resolution 0.0015% of span (16 bits), accuracy ±0.02% of span•RS232 or RS485 serial data output, half or full duplex, isolated•Modbus RTU, Modbus ASCII or Laurel ASCII protocol•5V, 10V or 24V dc transducer excitation output, isolated•Dual solid state relays for alarm or control, isolated•Universal AC power, 85-264 Vac, or low voltage power, 10-48 Vdc or 12-32 Vac•Power over Ethernet (PoE) jumper selectable with 10-48 Vdc supply•Custom curve linearization and rate from successive readings (optional) DescriptionLaureate DC input transmitters provides six voltage input ranges and four current input ranges, all factory calibrated and jumper selectable. The 200.00 mV and 2.0000 V ranges provide a high input impedance of 1 GΩ to minimize the load on the voltage signal. A 5.000A range measures the IR drop across a built-in 10 mΩ current shunt. The transmitters can also easily be scaled in software for use with external shunts.Fast read rate at up to 50 or 60 conversions per second while integrating the signal over a full power line cycle is provided by Concurrent Slope (Pat 5,262,780) analog-to-digital conversion. High read rate is ideal for peak or valley capture and for real-time computer interface and control.Digital signal filtering modes are selectable for stable readings in electrically noisy environments.•An unfiltered selection provides true peak and valley readings and aids in control applications.• A batch average filter selection averages each 16 conversions for an update every 1/4 sec.•An adaptive moving average filter selection provides a choice of 8 time constants from 80 ms to 9.6 s. When asignificant change in signal level occurs, the filter adapts by briefly switching to the shortest time to follow the change, then reverts back to its selected time constant. An Auto settingselects the time constant selection based on signal noise. Standard features of Laureate LTE transmitters include:•Ethernet I/O, isolated. Supported protocols are ModbusRTU and ASCII (tunneled via Modbus TCP) and Laurel ASCII.The latter is simpler than the Modbus protocol and is recom-mended when all devices are Laureates. Note that RS232 or RS485 data I/O in lieu of Ethernet is provided by LT Seriestransmitters.•4-20 mA, 0-20 mA or 0-10V analog transmitter output, isolated, jumper-selectable and user scalable. All selections provide 16-bit (0.0015%) resolution of output span and 0.02% output accuracy of a reading from -99,999 to +99,999 counts that is also transmitted digitally. Output isolation from signal and power grounds eliminates potential ground loop problems.The supply can drive 20 mA into a 500 ohm (or lower) load for 10V compliance, or 10V into a 5K ohm (or higher) load for2 mA compliance.•Dual solid state relays, isolated. Available for local alarm or control. Rated 120 mA at 130 Vac or 180 Vdc.•Universal 85-264 Vac power. Low-voltage 10-48 Vdc or 12-32 Vac power is optional.Discovery and configuration of Laureate Ethernet Nodes is easily achieved with Laurel's Node Manager Software, and the discovered transmitters can then be programmed using Laurel's Instrument Setup Software. Both softwares run on a PC under MS Windows and can be downloaded at no charge.SpecificationsAnalog Input Range Resolution Accuracy Input OhmsDC Voltage ±200.00 mV±2.0000 V±20.000 V±200.00 V±600.0 V*10 µV100 µV1 mV10 mV100 mV±0.01% FS± 2 counts1 GΩ1 GΩ10 MΩ10 MΩ10 MΩDC Current ±2.0000 mA±20.000 mA±200.00 mA0.1 µA1 µA10 µA±0.01% FS± 2 counts100 Ω10 Ω1 Ω ±5.000 A 1 mA±0.1% FS± 2 counts0.01 Ω* Range ETL certified to ±300.0 VInput Resolution Update Rate, Max Max applied voltage Over-current protection 16 bits (65,536 steps)50/sec at 50 Hz, 60/sec at 60 Hz600 Vac for 20, 200 & 600 V ranges, 125 Vac other ranges 25x for 2 mA, 8x for 20 mA, 2.5x for 200 mA, 1x for 5 AAnalog Output (standard)Output Levels Compliance, 4-20 mA Compliance, 0-10V Output Resolution Output Accuracy Output Isolation 0-20 mA or 0-10 Vdc (selectable)10V ( 0-500Ω load )2 mA ( 5 kΩ load )16 bits (65,536 steps)0.02% of output span plus conversion accuracy 250V rms working, 2.3 kV rms per 1 minute testSerial Data Output (standard)TypeData RatesOutput Isolation Serial Protocols Modbus Compliance Digital Addresses 10/100Base-T Ethernet per IEEE 802.3300, 600, 1200, 2400, 4800, 9600, 19200 baud250V rms working, 2.3 kV rms per 1 min testModbus TCP, Modbus RTU, Modbus ASCII, Laurel ASCII Modbus over Serial Line Specification V1.0 (2002)247 for Modbus, 31 for Laurel ASCIIDual Relay Output (standard)Relay Type Load Rating Two solid state relays, SPST, normally open, Form A 120 mA at 140 Vac or 180 VdcTransducer Excitation Output (standard)Output Levels Output Isolation 5V@100 mA, 10V@120 mA, 24V@50 mA (jumper selectable) 50V from signal groundPower InputStandard Power Low Power Option Power Frequency Power Isolation Power Consumption 85-264 Vac or 90-300 Vdc10-48 Vdc or 12-32 VacDC or 47-63 Hz250V rms working, 2.3 kV rms per 1 min test 2W typical, 3W with max excitation outputMechanicalDimensions Mounting Connectors 129 x 104 x 22.5 mm case35 mm rail per DIN EN 50022Detachable screw-clamp connectors for signal and power RJ45 jack for EthernetEnvironmentalOperating Temperature Storage Temperature Relative Humidity Cooling Required 0°C to 55°C-40°C to 85°C95% at 40°C, non-condensingMount transmitters with ventilation holes at top and bottom. Leave 6 mm (1/4") between transmitters, or force air with a fan.PinoutMechanicalOrdering GuideCreate a model a model number in this format: LTE20DCV1Transmitter Type LTE Laureate Ethernet and 4-20 mA TransmitterMain Board 2 Standard Main Board4 Extended Main BoardNote: Extended allows custom curve linearization and rate from successive readings.Power0 Isolated 85-264 Vac or 90-300 Vdc1 Isolated 12-32 Vac or 10-48 VdcSignal Input DC VoltsDCV1 ± 200.00 mVDCV2 ± 2.0000DCV3 ± 20.000 VDCV4 ± 200.00 VDCV5 ± 600.0 VDC AmpsDCA1 ± 2.0000 mADCA2 ± 20.000 mADCA3 ± 200.00 mADCA4 ± 5.000 ANote: The same DC signal conditioner can be user configured for DC Volts or DCAmps, and for process, strain or potentiometer follower signals. It is precalibrated inEEPROM for all DC Volt and DC Amp ranges listed.。

广东大明拉斐电气有限公司(企业信用报告)- 天眼查

4.1 融资历史
截止 2018 年 09 月 16 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参考。
4.2 投资事件
截止 2018 年 09 月 16 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参考。
5.2 失信信息
截止 2018 年 09 月 16 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参考。
6

5.3 法律诉讼
截止 2018 年 09 月 16 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参考。
5.4 法院公告
截止 2018 年 09 月 16 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参考。
5.5 行政处罚
截止 2018 年 09 月 16 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参考。
动产抵押、欠税公告、经营异常、开庭公告、司法拍卖六．知识产权信息：商标信息、专利信息、软件著作权、作品著作权、网站备案七．经营信息：招投标、债券信息、招聘信息、税务评级、购地信息、资质证书、抽查检查、产

南京国高电气自动化有限公司 DCM631 系列低压备自投产品用户手册说明书

本用户手册和产品今后可能会有小的改动，请注意核对你使用的产品与手册的版本是否相符。

1 整理归档 2015-8-2723更多产品信息，请访问：1目录1、DCM-631系列低压备自投装置概述 (4)2、DCM-631系列产品型号及应用范围 (4)3、DCM-631系列产品主要特点 (4)4、DCM-631系列产品功能配置表 (5)5、DCM-631系列产品硬件配置 (5)6、DCM-631系列产品技术参数表 (6)7、DCM-631系列产品安装 (7)8、DCM-631系列产品端子介绍 (9)9、DCM-631系列产品接线原理图 (10)9.1 DCM-631B接线原理图 (10)9.2 DCM-631Z接线原理图 (11)9.3 DCM-631K接线原理图 (12)9.4 DCM-631M接线原理图 (13)9.5 DCM-631Q接线原理图 (14)9.6 DCM-631F接线原理图 (15)9.7 DCM-631T 接线原理图 (16)9.8 DCM-631G 接线原理图 (17)9.9 DCM-631S 接线原理图 (18)10、DCM-631系列产品施工注意事项 (19)11、DCM-631系列产品操作指南 (20)12、DCM-631系列备自投软件逻辑 (25)12.1 DCM-631B工作原理 (25)12.2 DCM-631Z工作原理 (26)12.3 DCM-631K工作原理 (27)12.4 DCM-631M工作原理 (28)12.5 DCM-631Q工作原理 (30)12.6 DCM-631F工作原理 (31)12.7 DCM-631T工作原理 (33)12.8 DCM-631G工作原理 (36)12.9 DCM-631S工作原理 (38)23 DIRECTORY13、DCM-631系列参数设定 (39)14、DCM-631系列调试方法及注意事项 (42)15、DCM-631系列产品选型 (45)1、DCM-631 Series Power Automatic Switching Device( PASD) Overview (46)2、DCM-631 Model and App scope (46)3、DCM-631 Main Features (46)4、DCM-631 Hardware Configuration (47)5、About Assembly (47)6、DCM-631 Connection Port (49)7、About The typical Wiring Diagram (50)8、About Panel (53)41、DCM-631系列低压备自投装置概述DCM-631系列低压备自投装置主要用于690V 以下配电系统，对主备电源进行迅速可靠的切换，确保生产供电的可靠。

欧姆朗电子GY5000电磁漏电保护器产品说明书

Dimensions: [mm]71610749118201274911820127491182012T e m p e r a t u r eT T T 7491182012Cautions and Warnings:The following conditions apply to all goods within the product series of WE-UNIT ofWürth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.•The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, as the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektronik's specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the component. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.•Due to heavy weight of the components, strong forces and high accelerations may have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.•The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODCHC004.0012021-01-20DIN ISO 2768-1mDESCRIPTIONWE-UNIT Off-Line TransformerORDER CODE7491182012SIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODCHC004.0012021-01-20DIN ISO 2768-1mDESCRIPTIONWE-UNIT Off-Line TransformerORDER CODE7491182012SIZE/TYPE BUSINESS UNIT STATUS PAGE。

人民电力自动化产品选型手册说明书 (2)

建设一个造福人类的世界知名电气企业Building a world famous electricenterprise for the benefit of mankind云南人民电力电气有限公司是一家专业生产干式、油浸式电力变压器，风力发电用组合式变电站、美式箱变、欧式箱变、户外开闭所、高低压开关柜等电力成套设备及中低压电器元件的高科技、节能环保型电力设备骨干企业，特别是中低压电器元件，填补了西南地区的空白，市场潜力巨大。

企业占地面积66999平方米，净用地面积66000平方米，建筑面积62666平方米。

其中，厂房面积26800平方米，办公楼面积17929平方米，职工宿舍面积17937平方米。

公司总投资3.6亿元人民币。

公司现有员工近300人，其中高级技术职称26人，中级技术职称36人，其中总工程师曾参加国家电力设备行业标准起草工作。

公司拥有主要生产、检测设备126台套。

我公司投入国内外先进设备的同时，不断引进吸收设计顶尖电力产品制造技术。

拥有电力产品独立研发、制造、检测全程控制的成熟技术和工艺，具有年生产110kV 级以下干式变压器80万kVA 、油浸式变压器120万kVA 、组合式变电站1200台，35kV 级以下高低压开关柜10000台，及各类中低压电器元件，年产销额达3.6亿元人民币。

我公司坚持“人民电力为人民”的服务宗旨，以市场为导向，以客户为中心。

大力实施“以质量创市场，以品牌求发展，以科技促进步”的品牌战略，运用现代化企业管理方法全面实施科学质量管理体制，不断完善售后服务体系，对客户的需求承诺随叫随到，取得了良好的社会效益与经济效益。

坚持“质量立企、科技兴企”的发展方针和“顾客第一，服务至上”的原则，以优质的质量和服务，树立一流的企业形象。

在社会发展和市场体系的良好环境下，我公司愿与社会各界和广大客户精诚合作，开拓创新，与时俱进，共同发展，做到更大、更新、更强。

企业简介COMPANY PROFILEPEOPLE ELECTRICAL APPLICANCE企业荣誉COMPANY HONOR实施“以客户需求为中心，以生产管理为基础，持续改进质量体系，提供用户满意产品”的质量方针，持续进行质量与过程改进，形成了全面的质量控制制度和有效的控制手段。

浙江达瑞科技有限公司 60V P-Channel MOSFET 数据手册说明书

PRODUCT SUMMARYV DS (V)R DS(on) (Ω)I D (A)Qg (Typ)-600.061 at V GS = - 10 V -30100.072 at V GS = - 4.5 V-26Notes:a.See SOA curve for voltage derating.b.Surface Mounted on 1" x 1" FR-4 boad.ABSOLUTE MAXIMUM RATINGS T C = 25°C, unless otherwise notedParameterSymbol Limit Unit Gate-Source VoltageV GS ± 20VContinuous Drain Current (T J = 175 °C)T C = 25 °C I D -30A T C = 100 °C-25Pulsed Drain CurrentI DM -50Continuing Source Current (Diode Conduction)I S -20Avalanche CurrentI AS -20Single Pulse Avalanche Energy L = 0.1 mH E AS 7.2mJ Maximum Power DissipationT C = 25 °C P D 34a W T A = 25 °C 4b Operating Junction and Storage T emperature RangeT J , T stg-55 to 175°C THERMAL RESISTANCE RATINGSParameterSymbol T ypical MaximumUnitJunction-to-Ambient b t ≤ 10 sec R thJA 2025°C/W Steady State6275Junction-to-CaseR thJC56P-Channel 60-V (D-S) MOSFETFEATURES•TrenchFET ® Power MOSFET •100 % UIS TestedAPPLICATIONS •Load SwitchNotes:a.Guaranteed by design, not subject to production testing.b.Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %.c.Independent of operating temperature.Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.SPECIFICATIONS T J = 25°C, unless otherwise notedParameter Symbol T est Conditions Min T yp a Max UnitStaticDrain-Source Breakdown Voltage V (BR)DSS V GS = 0 V , I D = - 250 µA -60V Gate Threshold Voltage V GS(th) V DS = V GS , I D = - 250 µA -1.0-2.0-3.0Gate-Body LeakageI GSS V DS = 0 V, V GS = ± 20 V ± 100nAZero Gate Voltage Drain Current I DSS V DS = - 60 V , V GS = 0 V -1µA V DS = - 60 V , V GS = 0 V , T J = 125 °C -50V DS = - 60 V , V GS = 0 V , T J = 175 °C-150On-State Drain Current bI D(on)V DS = - 5 V , V GS = - 10 V -10A Drain-Source On-State Resistance br DS(on)V GS = - 10 V, I D = - 5 A0.100ΩV GS = - 10 V, I D = - 5 A, T J = 125 °C V GS = - 10 V, I D = - 5 A, T J = 175 °C0.150V GS = - 4.5 V , I D = - 2 A0.072Forward T ransconductance b g fs V DS = - 15 V , I D = - 5 A8S Dynamic Input Capacitance C iss V DS = - 25 V , V GS = 0 V , f = 1 MHz1000pF Output CapacitanceC oss 120Reverse Transfer Capacitance C rss 100Total Gate Charge Q g V DS = - 30 V, V GS = - 10 V , ID = - 8.4 A 10nC Gate-Source Charge Q gs 2.1Gate-Drain Charge Q gd 3.2Gate Resistance R g f = 1 MHz8.0ΩTurn-On Delay Time c t d(on) V DD = - 30 V, R L = 3.57 ΩI D ≅ - 8.4 A, V GEN = - 10 V , R G = 2.5 Ω6ns Rise Time ct r 15Turn-Off Delay Time c t d(off) 16Fall Time c t f 8Source-Drain Diode Ratings and Characteristics (T C = 25°C)bPulsed Current I SM -50A Forward Voltage b V SD I F = - 2 A, V GS = 0 V -0.9-1.3V Reverse Recovery Time t rr I F = - 8 A, di/dt = 100 A/µs50ns Reverse Recovery TimeQ rr80nC 0.061TYPICAL CHARACTERISTICS 25°C unless notedOutput CharacteristicsTransconductanceCapacitanceTransfer CharacteristicsOn-Resistance vs. Drain CurrentGate ChargeTYPICAL CHARACTERISTICS 25°C unless notedTHERMAL RATINGSOn-Resistance vs. Junction TemperatureSource-Drain Diode Forward VoltageDrain Current vs. Case TemperatureTHERMAL RATINGSNormalized Thermal Transient Impedance, Junction-to-AmbientNormalized Thermal Transient Impedance, Junction-to-CaseTO-252AA CASE OUTLINENote•Dimension L3 is for reference only.MILLIMETERSINCHESDIM.MIN.MAX.MIN.MAX.A 2.18 2.380.0860.094A1-0.127-0.005b 0.640.880.0250.035b20.76 1.140.0300.045b3 4.95 5.460.1950.215C 0.460.610.0180.024C20.460.890.0180.035D 5.97 6.220.2350.245D1 5.21-0.205-E 6.35 6.730.2500.265E1 4.32-0.170-H 9.4010.410.3700.410e 2.28 BSC 0.090 BSC e1 4.56 BSC 0.180 BSC L 1.40 1.780.0550.070L30.89 1.270.0350.050L4- 1.02-0.040L51.141.520.0450.060ECN: X12-0247-Rev. M, 24-Dec-12DWG: 5347RECOMMENDED MINIMUM PADS FOR DPAK (TO-252)Recommended Minimum PadsDimensions in Inches/(mm)DisclaimerAll products due to improve reliability,function or design or for other reasons,product specifications and data are subject to change without notice.Taiwan VBsemi Electronics Co.,Ltd.,branches,agents,employees,and all persons acting on its or their representatives(collectively,the"Taiwan VBsemi"),assumes no responsibility for any errors,inaccuracies or incomplete data contained in the table or any other any disclosure of any information related to the product.(www.VBsemi.tw)Taiwan VBsemi makes no guarantee,representation or warranty on the product for any particular purpose of any goods or continuous production.To the maximum extent permitted by applicable law on Taiwan VBsemi relinquished:(1)any application and all liability arising out of or use of any products;(2)any and all liability, including but not limited to special,consequential damages or incidental;(3)any and all implied warranties, including a particular purpose,non-infringement and merchantability guarantee.Statement on certain types of applications are based on knowledge of the product is often used in a typical application of the general product VBsemi Taiwan demand that the Taiwan VBsemi of.Statement on whether the product is suitable for a particular application is non-binding.It is the customer's responsibility to verify specific product features in the products described in the specification is appropriate for use in a particular application. Parameter data sheets and technical specifications can be provided may vary depending on the application and performance over time.All operating parameters,including typical parameters must be made by customer's technical experts validated for each customer application.Product specifications do not expand or modify Taiwan VBsemi purchasing terms and conditions,including but not limited to warranty herein.Unless expressly stated in writing,Taiwan VBsemi products are not intended for use in medical,life saving, or life sustaining applications or any other application.Wherein VBsemi product failure could lead to personal injury or death,use or sale of products used in Taiwan VBsemi such applications using client did not express their own risk.Contact your authorized Taiwan VBsemi people who are related to product design applications and other terms and conditions in writing.The information provided in this document and the company's products without a license,express or implied, by estoppel or otherwise,to any intellectual property rights granted to the VBsemi act or document.Product names and trademarks referred to herein are trademarks of their respective representatives will be all.Material Category PolicyTaiwan VBsemi Electronics Co.,Ltd.,hereby certify that all of the products are determined to be R oHS compliant and meets the definition of restrictions under Directive of the European Parliament 2011/65/EU,2011Nian.6.8R i Yue restrict the use of certain hazardous substances in electrical and electronic equipment(EEE)-modification,unless otherwise specified as inconsistent.(www.VBsemi.tw)Please note that some documents may still refer to Taiwan VBsemi RoHS Directive2002/95/EC.We confirm that all products identified as consistent with the Directive2002/95/EC European Directive 2011/65/.Taiwan VBsemi Electronics Co.,Ltd.hereby certify that all of its products comply identified as halogen-free halogen-free standards required by the JEDEC JS709A.Please note that some Taiwanese VBsemi documents still refer to the definition of IEC61249-2-21,and we are sure that all products conform to confirm compliance with IEC61249-2-21standard level JS709A.。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

招
商
手
册
广东大明拉斐电气有限公司Laffey（二零一五年六月）
公司简介：广东大明拉斐电气有限公司，是全球知名高端酒店品牌的战略合作品牌，专注于开关面板的定制服务以及中高档家庭开关插座的研发生产。

我们成立伊始，就一直专注于高端酒店别墅开关的生产。

我们已经成为全球高端酒店别墅开关的领军品牌。

我们致力于为客户打造更智能，更精致的联体开关产品
全球有将近100家五星级酒店选择我们
你还犹豫什么？
一、品牌优势
1、品牌定位：高档住宅酒店别墅专用开关。

2、样板工程概况：全国有将近600个高档酒店样板工程可验证产品品质。

无须多说吹嘘，无数高端客户的选择便是实力的见证。

3、部分案例实景
二、Laffey电气为您提供最齐全的面板材质和多样化定制颜色选择
1、韩国进口T型板材 V9欧风-土豪金/绅士灰
2、铝材 V7、R7系列香槟
3、不锈钢材质 V3、V6系列香槟
4、钢化磨砂玻璃材质 N8系列香槟
5、PC（塑料拉丝） A9系列香槟/米兰
6、工程定制系列（各材质）颜色可按客户要求定制
三、公司支持
3.1公司统一制作旗舰版展柜（旗舰版展示专业形象）
名称86标准展柜118标准展柜橱窗展柜灯箱展柜顶灯箱规格0.63*2.4米0.63*2.4米1*2.4米1*2.4米 1.2*0.35米
5米展柜配置方案1、空间尺寸要求：宽≥5米，高≥2.8米
配置方案：标准展柜4件+ 橱窗展柜1件+ 灯箱展柜1件+ 顶灯箱4件2、空间尺寸要求：宽≥5米，2.5≤高<2.8米
配置方案：标准展柜4件+ 橱窗展柜1件+ 灯箱展柜1件
3米展柜配置方案1、空间尺寸要求：3米≤宽<3.6米，高≥2.8米
配置方案一：标准展柜3件+ 橱窗展柜1件+ 顶灯箱2件配置方案二：标准展柜3件+ 灯箱展柜1件+ 顶灯箱2件2、空间尺寸要求：3米≤宽<3.6米，2.5≤高<2.8米
配置方案一：标准展柜3件+ 橱窗展柜1件
配置方案二：标准展柜3件+ 灯箱展柜1件
其他配置方案1、空间尺寸要求：3.6米<宽<4米，高≥2.8米
配置方案一：标准展柜4件+ 橱窗展柜1件+ 顶灯箱3件
配置方案二：标准展柜4件+ 灯箱展柜1件+ 顶灯箱3件
2、空间尺寸要求：3.6米<宽<4米，2.5≤高<2.8米
配置方案一：标准展柜4件+ 橱窗展柜1件
配置方案二：标准展柜4件+ 灯箱展柜1件
3、空间尺寸要求：4米<宽<5米，高≥2.8米
配置方案：标准展柜3件+ 橱窗展柜1件+ 灯箱展柜1件+ 顶灯箱3件4、空间尺寸要求：4米<宽<5米，2.5≤高<2.8米
配置方案：标准展柜3件+ 橱窗展柜1件+ 灯箱展柜1件+ 顶灯箱3件
特别说明1、展柜之间的间距范围：5cm≤间距≤10cm
2、顶灯箱安装：
（1）垂直方向：顶灯箱在展柜顶部与天花板之间居中安装，但顶灯箱下部距离展柜顶部的间距不得超过10cm；
（2）水平方向：原则上左侧顶灯箱左对齐左侧展柜外侧、右侧顶灯箱右对齐右侧展柜外侧，各顶灯箱之间的间距均等。

3、展柜产品配置规定：安装旗舰版展柜的终端，标准展柜上的产品配置严格遵守公司制定的标准，不得随意更换；同时，申请旗舰版展柜必须同时申请展柜样品。

无论是否申请展柜样品，均按照所申请展柜的产品配置扣除产品费用。

4、展柜申请注意事项：申请展柜时除了需要注明申请展柜的编号、名称及数量外，还需要注明安装位置的空间尺寸并配上照片，以便于公司准确审核该客户终端的展柜安装位置是否符合安装条件；客户终端安装好展柜后，必须拍摄实景照片回传公司备案。

3.2公司总部的营销支持
3.2.1展会支持：总部每年高密度参加全国灯饰建材行业专业展会，如上海酒店国际用品展、上海led国际照明展、广州光亚展、广州建博会。

提高行业内知名度和曝光度。

也通过展会网罗大量高质量意向客户供各区域代理商跟进。

2015年广州光亚展布展实景
3.2.1营销方案支持：成为我司代理商后，总部将为代理商提供与终端客户具体的客户开发指导方针，为代理商提供具体的营销合作模式和合作协议指导文件，经销商无须迷茫，可直接参照总部成功的方案执行。

3.2.2业务培训支持：我司会提供专业销售人员辅助代理商开发市场，而代理商本身的营销人员也可参与总部提供的专业技能业务培训。

3.2.3产品功能一直保持行业领先：
WIFI+USB+PC插座模块（全系列产品模块匹配）
真正的嵌入式无线WIFI：Laffey-link
1、采用高品质高通IC，性能稳定，网络质量好
2、采用稳定与成熟的高品质电源控制模块，发热低，防干扰性强。

3、采用国标86底盒安装，无需专用底盒，通用性强。

4、实现功能键式的自由组合，安装与订货方便。

5、嵌入墙体式安装，与开关插座风格浑然一体，高端家庭首选。

蓝牙+USB充电+USB播放影音+HDMI高清接口插座（全系列产品模块匹配）
1、带无线蓝牙功能，可以随心利用它播放手机或平板电脑的音乐通过背景音乐喇叭或音响在家庭客厅或房间进行播放。

2、USB充电功能，免去我们经常充电找插头的烦恼。

3、USB影音数据传输功能，在U盘的影音文件可以通过插座链接显示器进行播放。

4、HDMI高清影音传输功能。

5、Laffey多媒体系统，重新定义你的个性生活。

以上两款功能键通用laffey电气产品全系列
3.2.4零售商销售活动支持：我司提供的是全年的礼品政策.全年无间断支持经销商和零售商进行团购或砍价会活动。

免去搞活动还要到处买礼品的烦恼
四、户外形象广告支持（可根据客户具体要求设计）
户外形象广告（竖式）户外形象广告（方式）
户外形象广告（横式）
五、加盟流程
意向客户符合公司基本要求
以laffey电气为事业经营
当地区域经理或者大区经理进行实地考察
制定市场预期销量目标签订laffey电气加盟合作协议
规定时间内，完成首批货款仓库选址，总部货物以及相关物料齐备
业务培训
区域经理协助代理商制定季度开发计划
市场开发计划的落实
完成
六、laffey电气2015年产品画册。