基于GSM的车载网络通信建模(IJCNIS-V6-N3-5)
基于GSM网络和CAN总线的汽车远程控制系统

基于GSM网络和CAN总线的汽车远程控制系统王诗舰;唐厚君;熊天毅【摘要】设计了一种基于GSM网络和CAN总线的汽车远程控制系统.基于MC9S08DZ60微处理器进行开发,主要由控制模块,GPS定位模块和GSM通信模块组成,分别介绍了各模块的硬件设计以及软件设计,并给出系统的总体结构和功能设计方案.系统功能齐全,且具有很好的扩展型.【期刊名称】《电气自动化》【年(卷),期】2013(035)003【总页数】3页(P33-35)【关键词】CAN总线;GPS;GSM网络;远程控制【作者】王诗舰;唐厚君;熊天毅【作者单位】上海交通大学电子信息与电气工程学院,上海200240;上海交通大学电子信息与电气工程学院,上海200240;上海交通大学电子信息与电气工程学院,上海200240【正文语种】中文【中图分类】TP302.10 引言随着CAN总线在世界范围内的汽车制造中的广泛推行和发展,使得各项附加功能部件能作为一项标准装备嵌入到车身中。
借助于CAN总线,我们能通过GSM网络对车辆本身进行远程控制,同样能通过GPS模块得到车辆的准确位置后使用通讯模块与用户得以联系,进而通过通讯模块直接对车辆进行远程操控成为可能。
因此,提出了基于CAN总线的汽车远程控制系统的设计方案,将GPS定位以及GSM通讯等功能集成在一起,并用CAN总线与车辆组合,实现功能。
1 汽车远程控制系统的总体设计该汽车远程控制系统的目的是给予车主能够更加方便智能的控制汽车,能够仅通过手机就能完成多数功能,可以使得车主随时随地能对车辆进行控制而没有限制,真正实现人,车的有机结合。
该系统由通信模块,GPS定位模块和控制模块组成。
通信模块通过GSM网络接收用户发送的短信,或者得到控制模块的命令对用户发送指定的短信。
GPS定位模块则以固定的时间频率向控制模块传送车辆的位置信号。
控制模块则与车辆进行CAN通信,分析通信模块得到的来自用户的信息,并不断存储GPS定位信息,通过各项得到的数据进行分析整合,根据用户的短信命令控制车辆动作,根据CAN通信得到的数据实时向用户报告车辆状况。
GSM

1.1 GSM系统历史背景GSM数字移动通信系统是由欧洲主要电信运营者和制造厂家组成的标准化委员会设计出来的,它是在蜂窝系统的基础上发展而成。
蜂窝系统的概念和理论二十世纪六十年代就由美国贝尔实验室等单位提了出来,但其复杂的控制系统,尤其是实现移动台的控制直到七十年代随着半导体技术的成熟,大规模集成电路器件和微处理器技术的发展以及表面贴装工艺的广泛应用,才为蜂窝移动通信的实现提供了技术基础。
直到1979年美国在芝加哥开通了第一个AMPS(先进的移动电话业务)模拟蜂窝系统,而北欧也于1981年9月在瑞典开通了NMT(Nordic 移动电话)系统,接着欧洲先后在英国开通TACS系统,德国开通C-450系统等。
见表1-1。
表1-1 1991年欧洲主要蜂窝系统蜂窝移动通信的出现可以说是移动通信的一次革命。
其频率复用大大提高了频率利用率并增大系统容量,网络的智能化实现了越区转接和漫游功能,扩大了客户的服务范围,但上述模拟系统有四大缺点:1.各系统间没有公共接口;2.很难开展数据承载业务;3.频谱利用率低无法适应大容量的需求;4.安全保密性差,易被窃听,易做“假机”。
尤其是在欧洲系统间没有公共接口相互之间不能漫游,对客户之间造成很大的不便。
GSM数字移动通信系统史源于欧洲。
早在1982年,欧洲已有几大模拟蜂窝移动系统在运营,例如北欧多国的NMT(北欧移动电话)和英国的TACS(全接入通信系统),西欧其它各国也提供移动业务。
当时这些系统是国内系统,不可能在国外使用。
为了方便全欧洲统一使用移动电话,需要一种公共的系统,1982年北欧国家向CEPT(欧洲邮电行政大)提交了一份建议书,要求制定900MHz频段的公共欧洲电信业务规范。
在这次大会上就成立了一个在欧洲电信标准学会(ETSI)技术委员会下的“移动特别小组\Group SpecialMobile)简称“GSM”,来制定有关的标准和建议书。
1986年在巴黎,该小组对欧洲各国及各公司经大量研究和实验后所提出的8个建议系统进行了现场实验。
基于大规模MIMO技术的5G无线信道建模及仿真

2020/07/DTPT——————————收稿日期:2020-05-150引言在过去30多年间,移动通信经历了从语音业务到移动宽带数据业务的飞跃式发展,不仅深刻地改变了人们的生活方式,也极大地促进了社会和经济的发展。
而人们对无线通信数据业务需求的爆发式增长也促进了5G 的研发和标准化工作,在2015年的日内瓦ITU-R 大会上5G 被正式命名为IMT-2020。
5G 涉及连续广域覆盖、热点高容量、低时延高可靠和低功耗大连接等场景。
技术挑战包括0.1~1Gbit/s 的用户体验速率,数十Gbit/s 的峰值速率,一百万每平方公里的连接数密度,毫秒级的端到端时延等。
为满足更多样化的场景和更极致的性能体验,稀疏码分多址(SC⁃MA )、多图样分割多址(PDMA )、用户共享接入(MU⁃SA )等新型多址技术、大规模天线、超密集组网和全频谱接入都被认为是5G 的关键使能技术。
MIMO 技术已经在4G 系统中广泛应用,面对5G 在传输速率和系统容量等方面的性能挑战,天线数量进一步增加将是MIMO 技术继续演进的重要方向。
通过大规模天线,基站可以在三维空间形成具有高空间分辨能力的高增益窄细波束,提供更灵活的空间复用能力,改善接收信号强度并更好地抑制用户间干扰,大大提高系统基于大规模MIMO 技术的5G 无线信道建模及仿真Modeling and Simulation of 5G Wireless Channel Basedon Massive MIMO Technology关键词:Massive MIMO;5G;信道建模;无线仿真doi :10.12045/j.issn.1007-3043.2020.07.009文章编号:1007-3043(2020)07-0046-06中图分类号:TN929.5文献标识码:A开放科学(资源服务)标识码(OSID ):摘要:作为5G 关键技术之一,Massive MIMO 技术通过提供更灵活的空间复用能力可以有效提高系统容量和频谱利用率。
基于GSM网络汽车报警系统设计

pdf文档可能在WAP端浏览体验不佳.建议您优先选择TXT,或下载源文件到本机查看.《现代电子技术》 2009 年第 17 期总第 304 期电子技术应用基于 GSM 网络汽车报警系统设计方武( 苏州市经贸学院江苏苏州 215009)摘 : 分析现有汽车报警器地缺点 ,详细阐述了基于 STC89C52 单片机地 GSM 汽车报警系统地硬件和软件设计 .该要报警系统利用 STC89 系列单片机优良地性价比 ,使用支持 GSM 地 SIM300C 专用通信模块 ,具有远距离、无噪声污染和双向控制等特点 ,避免了现有普通报警器报警距离短、对环境产生噪音污染以及 GPS 报警器入网成本高 ,监控范围小 ,稳定性差等缺点 .该报警系统可有效应用于各类机动车防盗报警 . 关键词 : STC89 ; GSM ; 报警系统 ; SIM300C ; 双向控制中图分类号 : TN914 文献标识码 :A 文章编号 :1004 - 373X ( 2009) 17 - 197 - 03Design of Car Alarming System Based on GSM Net workFAN G Wu(Suzhou Instit ue of Trade & Commerce ,Suzhou ,215009 ,China)Abstract : In this paper ,disadvantages of nowadays mobile alarming units are analyzed ,a new design mobile alarming unit system based on GSM is introduced. The new alarming system uses STC89C52 series chips which provide high cost - performance , and SIM300C communication unit which supports GSM. It possesses the properties such as long distance available ,no noise pollution ,and bilateral controlling ,avoiding the disadvantages such as short distance ,pollution ,noise of the common alarming system and high cost onnet ,small domain supervision ,low stability of GPS alarming system. It can be applied to all sorts of vehicles. Keywords : STC89 ; GSM ;alarming system ; SIM300C ;bilateral co nt rol0 引言随着经济地迅速发展 ,社会上汽车地数量大幅度上升 .同时 , 偷车案例数量也在逐年大幅增长 [ 1 ] .事实上 ,汽车完全可以通过安装报警器使窃贼无机可乘 .然而 ,早期地车用报警器功能单一 , 误报率比较高 , 噪音大 ,有时候刮风下雨也会报警 , 真正遇到险情时却没有达到报警效果 . 目前报警器种类有很多 , 主要可分为声音报警器 , 无线报警器及 GPS 定位报警器 .常用地声音报警器一般通过振动传感器感知被保护物体 ( 如汽车或保险箱) 地异常振动 ,然后驱动大功率声音报警 , 该报警方式缺点是报警距离短、对环境产生噪音污染、报警器易被拆卸或遭破坏 .而 GPS 报警器入网成本高 ,监控范围小 , 稳定性差 [ 2 ] . 基于 GSM 网络汽车报警系统 ,集 GSM 网络、无线遥控、数字信号处理技术于一身 , 采用当代最新地技术成果 ,具有双向通信、安装简单、使用方便、用途广泛、可靠性高地特点 ,可广泛应用于各类汽车防盗报警 [ 3 ] .1 系统工作原理及结构组成车身地振动被传感器检测到 ,系统微控制器根据传感器检测地信号 ,通过系统分析、处理 ,生成报警信息 ; 同时 , 通过微控器控制 GSM 模块拨打用户电话并发出短信报警 .工作原理如图 1 所示 .图1 系统工作原理图2 系统硬件设计系统硬件电路主要由以下几个部分组成 : 继电器模块、微处理器模块、无线通信模块、 GSM 模块、电源模块、传感器模块 .系统硬件结构如图 2 所示 . 2. 1 微处理器模块系统微处理器模块采用 STC89C52 系列单片机为核心 ,主要完成系统控制以及信号处理等功能[ 1 ] .该单片机是宏晶科技推出地新一代超强抗干扰/ 高速/ 低功耗地单片机 ,指令代码完全兼容传统 8051 单片机 ,12 时钟/ 机器周期和 6 时钟/ 机器周期可任意选择 ,最新地 D 版本内部集成 MAX810 专用复位电路 ; 工作频率范围为 : 0 ~197本系统地工作原理如下 : 当汽车遭受盗窃时 , 由于收稿日期 :2009 - 01 - 08汽车电子方 : 基于 GSM 网络汽车报警系统设计武行必要地设置 ; 控制模块接收用户指令 ,分配工作 ,进行相应处理 ; 监控模块 ,对传感器实时监控 ,被触发后发送短信报警 .40 M Hz ,相当于普通 8051 地 0~80 M Hz ,实际工作频率可达 48 M Hz ; 片上集成 1 280 B/ 512 B RAM ; ISP ( 在系统可编程) / IAP (在应用可编程) ,无需专用编程器/ 仿真器 ,可通过串口 ( P3. 0 ,P3. 1) 直接下载用户程序 ,8 KB 程序 3 s 即可完成一片 ,适用于大规模产品开发 .图2 系统结构图2. 2 GSM 模块系统 GSM 模块采用 SIM300C 专用通信模块 , 主要负责报警器与用户之间地短信以及电话通信 .该款模块内嵌 TCP/ IP 协议 ,A T 命令控制 , 实现数据传输非常方便 [ 4 ] .模块具有以下特点 : ( 1) 供电电压 :3. 4~4. 5 V ; ( 2) 编码方案 : CS - 1 ,CS - 2 ,CS - 3 and CS - 4 ; ( 3 ) SMS 短信支持 M T , MO , CB , Text and PDUmo de ; 短信存储 : SIM 卡 ; ( 4) 支持 11 8 V ,3 V 地 SIM 卡 . 198 图3 无线模块外围电路图3. 1 启动模块启动模块包含两个部分 : 初始化 S TC89 微控制器和初始化 SIM300C 通信模块 .首先 , 必须对微控制器地定时器和中断、、串口系统变量等进行初始化 . 微控制器处理速度快 , 串口速率慢 , 这对报警器实时监控带来了很大地隐患 ,微控制器不能一直等待接收完全部数据 [ 6 ] .为了提高实时监控能力 ,通信模块引入缓存 ,把不完整地信息暂存在缓存内 , 待信息完整后再进行处理 .缓存结构加入读指针和写指针 ,对缓存进行读、写操作 ,保证了在读数据地同时 , 也可以进行写操作 ,两指针互不干扰 .初始化 SIM300C 通信模块通过拉低 IGT 启动 SIM300C , 并通过串口发送 A T 指令进行必要地初始化设置 .表 1 是初始化 SIM300C 使用地 A T 命令 .表 1 指令 ATA T 指令 AT A T + CSCA =“信息服务中心号码”A T + CM GF = 0 A T + CMN I = 2 ,2 ,0 ,1 A T + CL IP = 1SIM300C 以小尺寸和低功耗实现语音、 SMS 、数据和信息地高速传输 ,满足系统地设计要求 .2. 3 无线模块系统采用无线接收模块 3310A 用于遥控器与报警器地短距离数据传输 , 实现对报警器地启动和停止功能 . 3310A 接收模块是一片直接将芯片做在 PCB 板上具有较高性价比地超外差接收模块 , 具有体积小、免调试、无外围、性能稳定等特点 , 芯片内含射频放大器、混频器、本地振荡器、中频放大器、滤波器及限幅比较器 , 输出为数据电平信号 ,可直接至标准解码器或 CPU 解码 ,频率为 315 M Hz 及 4331 92 M Hz , 适合于 A S K 方式地发射模块及遥控手柄配套 [ 5 ] . 产品性能与优点 : 接收频率 :315 M Hz , 433 M Hz ( 免调试 ) ; 工作电压 :2. 5~6 V DC ( 典型 5 V ) ; 工作电流 :2.5 mA/ 3 V , 4. 5 mA/ 5 V ; 接收灵敏度 : - 90 dBm ( 1. 8 μV ) ; 接收方式 : A S K ; 数据速率 : 4. 8 Kb/ s ; 解调滤波器带宽 : 5 Kb/ s ; 工作温度 : - 40~ + 80 ℃. 其外围电路如图 3 所示 .3 系统软件设计功能握手设置本地信息服务中心号码PDU 模式信息提示 ,不储存信息来电显示根据 A T 指令回答地格式 < CR > < L F > 回答“ < CR > < L F > ” < CR > < L F > ACSII 码分别 0D H , , 0A H .短消息地发送和接收控制模式有三种 :Block 模式、 PDU ( Protocol Data U nit , 协议数据单元 ) 模式和Text 模式 .使用 Block 模式需要手机生产厂家提供驱动支持 .目前 , PDU 模式已取代 Block 模式 , 而 Text 模式不支持中文 .因此 , 为了系统地通用性 , 兼容中英文短消息地发送接收 , 本系统使用 PDU 模式来处理短消息 .为了减少程序地复杂性 , 系统不对信息进行储存 ,因为如果采用信息储存方式 ,需对信息读取 ,读取完根据工作原理 , 程序设计主要由以下三大模块组成 : 启动模块、控制模块、监控模块 .启动模块对部件进《现代电子技术》 2009 年第 17 期总第 304 期再删除信息 ,过程比较繁琐 [ 7 ] . 本系统则是利用信息提示地方法对信息内容进行读取地 .最后设置来电显示 , 主要为了确认用户地身份 ,便于用户启动、关闭监控功能 ,整个启动代码地设置主要是对后续地工作做好准备 [ 8 ] . 3. 2 控制模块根据程序设计需求 ,只需提取被叫号码和用户数据( U nicode 字符串) ,被叫号码用来确认是否机主手机号码 ,当不是主手机号码时不进行下一步操作 ,清空缓存 , 继续监控 ,确认后 , 根据用户短消息内容不同 , 做相应设置[ 9 ] . 其中“设置”命令地功能是将报警器中车主地手机号码进行修改“修改” ; 命令是将报警器中地密码进行修改 ,密码地作用是防止任何人都可以修改报警手机号码 .发送相应短消息内容 ,完成各种设置 : ( 1) “启动”短消息 ,启动报警器 . ( 2) “关闭”短消息 ,关闭报警器 . ( 3) “设置”短消息 ,替换拥有控制权地手机号码 . ( 4) “修改”短消息 ,修改登陆密码 . ( 5) “查询”短消息 ,查询报警器地工作状态 .3. 3 检测模块 4 结语电子技术应用与现有汽车报警系统相比 ,本系统地主要功能和优点有以下几方面 : ( 1) 由于采用专用高精度可调震动传感器检测方式 ,当触碰汽车产生地震动作用产生报警信号 , 传感器精度可调 ,能够有效地避免现有汽车震动报警器容易产生误报警地缺陷 . ( 2) 报警系统安装了移动通信模块和采用单片机智能控制 ,当报警信号产生时 , 移动通信模块自动拨叫车主移动电话或向车主移动电话发送短信息 ,这样报警信号就可以传送到移动通信服务覆盖地任何地方 ,克服了普通报警系统信号传送距离近地不足 .车主接到报警信号后可以采取必要措施 ,如电话报警 ,打电话询问 , 亲自察看等 . ( 3) 与现有报警器相比 ,该报警器可通过使用车主移动电话拨叫报警器 SIM 卡所包含地移动通信电话号码 ,双方号码吻合后自动解除报警 .也可以使用遥控器激活或解除报警 . ( 4) 基于 GSM 网络地报警系统解决了 GPS 入网成本高 ,监控范围小 ,稳定性差以及一般汽车报警器距离限制等问题 .参考文献[ 1 ] 仵博 ,刘兴东 ,吴敏 . 基于 GSM 地通用远程报警控制器地研该模块由高精度振动传感器组成 .模块被触发后 , 发送一个低电平信号到微控制器 .控制器检测到低电平信号 ,发送短信到机主手机报警 .由图 4 可以看到发完信息后 ,低电平还未跳到高电平时 ,又被微控器检测监控设备为低电平 , 又重复发了一条信息 [ 6 ] .为解决此问题 ,发送报警信息继续检测监控设备 ,当为高电平时才跳出 , 这样避免了产生信息重发 ,增强了系统地稳定性 .制 [J ] . 计算机工程与应用 ,2007 ,43 ( 8) :92 - 94.[ 2 ] 仵博 ,刘兴东 , 吴敏 . 基于 STC89 地 GSM 汽车报警器地设计与实现 [J ] . 微计算机信息 ,2007 ,23 ( 15) :263 - 264.[ 3 ] 周国祥 ,周俊 ,刘成良 , 等 . 基于 GSM 地远程通信控制器研制及其应用 [J ] . 计算机工程 ,2005 ,31 (19) :203 - 205.[ 4 ] 冀常鹏 ,包剑 ,刘建辉 . GPS/ GSM 车辆监控系统研究 [J ] . 微计算机信息 ,2003 ,19 ( 9) :44 - 48 ,95.[ 5 ] 杨利娟 ,鲁周迅 . 基于 GSM 线路检修监控系统地设计与实现 [J ] . 微计算机信息 ,2005 ,21 ( 20) :149 - 150.[ 6 ] 郭丙君 ,俞金寿 . 基于 GS0M 地远程监控系统 [J ] . 自动化仪表 ,2004 ,25 ( 8) :65 - 66.[ 7 ] 吴青 ,仵博 . GSM 汽车报警器系统 [J ] . 中国科技论文在线 , 2008 ,3 (2) :28 - 30. [ 8 ] 黄金珠 ,李超 ,谢鹏悦 ,等 . 基于 GSM 和 CDMA 地双模无线控制器 [ J ] . 计算机工程与设计 , 2007 , 28 ( 22 ) : 5 520 5 523. [ 9 ] 涂用军 ,王海峰 , 孙亚飞 . 一种基于移动终端地实时温度监测器地设计与实现 [J ] . 现代电子技术 ,2007 ,30 ( 22) :1 - 3. 图4 系统流程图[ 10 ] 邬伟奇 . STC89 系列高性能单片机及其应用 [J ] . 微计算机信息 ,2004 ,20 ( 7) :92 - 93. 作者简介 ,1981 年出生 ,湖北人 ,硕士研究生 ,讲师 .研究方向为嵌入式系统与智能仪器 . 方武男1991。
无线通信中的快时变信道建模

hl [ n]
M 1 m0
blmBm [n],
l 0,..., L 1
(1.3)
Bm 是 式中 blm 是第 l 个路径第 m 个基系数, 在一定时间周期 T 内不随时间 n 变化, 第 m 个基函数矢量,变量是时间 n ,通过上式,把时变量 hl [ n] 转化为一定时间周 期 T 内非时变量 blm 和另一时变量 Bm [ n] 的表达式,即在 T 内估计一次 blm 即可实 现对快时变信道参数 hl [ n] 的估算。式(1.3)代入式(1.2) ,可得到整个信息传输 的模型表示:
符号说明符号含义采样点数多径信道的路径数条信道的冲激响应基扩展模型中基函数向量个bem基系数kriging模型中相关性参数jakes模型中第l个路径的时延时间的功率jakes模型中为第l个时延分量加性高斯白噪声输入信号的估计值信道参数的估计值问题一41问题分析利用信道的部分测试数据估计信道的参数可以有效减少信道测试数据的采样频率提高信道测试的效率
参赛密码 (由组委会填写)
第 十 一 届 华 为杯 全国研 究生 数学建 模竞赛
学
校
参赛队号
队员姓名
参赛密码 (由组委会填写)
第十一届华为杯全国研究生数学建模竞赛
题 目
无线通信中的快时变信道建模
摘
要:
移动通信网络连接环境复杂多变,由多径效应和多普勒频移所带来的信号小 尺度衰落,导致无线通信中的信号的幅值、相位和频率都发生急剧变化,给无线 通信中的快时变信道建模带来更高的要求和挑战。 对于问题一信道估计模型,首先采用复指数基扩展模型(CE-BEM)对信道测试 数据进行拟合。通过仿真分析可知 CE-BEM 模型为取得一定估计精度所需的基函 数阶次较高,因此其在降低采样频率(减少实测数据),提高估计精度等方面性能欠 佳。其次,为克服 CE-BEM 模型的缺点,将工程中广泛应用的 Kriging 模型引入 到信道估计中,建立了 Kriging 信道估计模型,其能显著提高局部拟合精度。在保 证模型 NMSE 达到 10e-5 量级的条件下,可以将运动速度 180Km/h 的信道测试参 数采样频率由 200KHz 降为 2KHz。最后,分析了不同估计模型的算法复杂度,并 引入分段估计的思想使算法复杂度下降一个量级,同时将信道估计周期由 0.1s 降 为 0.01s,更适于快时变信道参数估计。 问题二分析了运动速度为 90Km/h,270Km/h,450Km/h 时多普勒效应对问题 一中所建的 Kriging 信道估计模型的准确度以及所需采样频率的影响。 通过分析可 得如下结论:a) 在相同采样频率条件下,模型的 NMSE 随着运动速度的增大而增 大;b) 在同一速度下,模型的 NMSE 随着采样频率的增大而减小;c) 在保证模 型 NMSE<10e-5 的条件下,不同速度 90Km/h、180km/h、270Km/h、450Km/h 所 需最小采样频率分别为 1KHz、2KHz、3KHz、5KHZ。
智能汽车CAN总线通信系统的建模与验证

第37卷第7期 计算机应用与软件Vol 37No.72020年7月 ComputerApplicationsandSoftwareJul.2020智能汽车CAN总线通信系统的建模与验证张 芮 王 瑞 楚 敏(首都师范大学信息工程学院 北京100048)(首都师范大学轻型工业机器人与安全验证北京市重点实验室 北京100048)收稿日期:2019-03-18。
国家自然科学基金项目(61702348,61572331,61472468)。
张芮,硕士生,主研领域:形式化验证。
王瑞,教授。
楚敏,硕士生。
摘 要 车载通信系统是智能车辆与外界环境交互的媒介和内部报文信息传输的载体。
为了保证智能车辆通信系统的安全性和可靠性,对智能汽车基于控制器局域网络(ControlAreaNetwork,CAN)总线的通信过程进行分析并建立时间自动机模型。
加入对通信过程中网关的分析和建模,模拟外部环境到内部单元之间不同速率通信过程;抽取车辆通信系统需要满足的属性。
运用模型检测工具验证了智能车辆通信的实时性和正确性。
结果表明该模型可以满足有关属性,确保车辆在遇到突发紧急的交通情况下,通信系统能够及时传递数据,车辆做出正确的反应并且辅助驾驶员做出相应操作。
关键词 形式化验证 智能汽车 控制器局域网络总线 通信系统 时间自动机中图分类号 TP311 文献标志码 A DOI:10.3969/j.issn.1000 386x.2020.07.001MODELINGANDVERIFICATIONOFCANBUSCOMMUNICATIONSYSTEMININTELLIGENTVEHICLEZhangRui WangRui ChuMin(CollegeofInformationEngineering,CapitalNormalUniversity,Beijing100048,China)(BeijingKeyLaboratoryofLightIndustrialRobotandSafetyVerification,CapitalNormalUniversity,Beijing100048,China)Abstract Vehicle mountedcommunicationsystemisthemediumforintelligentvehiclestointeractwiththeexternalenvironmentandthecarrierforinformationtransmissionofinternalmessage.Toensurethesafetyandreliabilityoftheintelligentvehiclecommunicationsystem,thecommunicationprocessofintelligentvehiclebasedonCANBUSisanalyzedandatimedautomatamodelisestablished.Theanalysisandmodelingofthegatewayinthecommunicationprocesswereaddedtosimulatethedifferentratecommunicationprocessfromtheexternalenvironmenttotheinternalunit.Theattributesthatthevehiclecommunicationsystemneedstomeetwereextracted.Thereal timeandcorrectnessofintelligentvehiclecommunicationwereverifiedbyusingmodeldetectiontools.Theverificationconclusionshowsthatthemodelcanmeettherelevantattributes,whichensurethatthecommunicationsystemcantimelytransferdata,thevehiclemakesthecorrectresponseandassistthedrivertomakethecorrespondingoperationincaseofemergencytraffic. Keywords Formalverification Intelligentvehicle CANBUS Communicationsystem Timedautomata0 引 言智能汽车的兴起为普通汽车向无人驾驶汽车转变提供了可能性,但这个过程不是一蹴而就的,需要经历一个漫长的时期[1]。
毕业设计基于GSM的车辆紧急求救系统的设计

基于GSM的车辆紧急求救系统的设计The Design of Vehicle SOS System Based on GSM Modem论文作者姓名:作者学号:所在学院:计算机与信息工程学院所学专业:自动化导师姓名职称:河南大学2010届毕业论文(设计、创作)开题报告(由学生本人认真填写)课题题目基于GSM的车辆紧急求救系统的设计课题来源□导师指定□自定■其他来源课题的目的、意义以及和本课题有关的国内外现状分析:1.目的:为现有车辆设计一款事故紧急求救系统,主要包括数据控制、数据接收、数据发送三大核心功能。
2.意义:降低交通事故后因抢救不及时而居高不下的死亡率,使得交通事故发生后救援中心能在第一时间赶到事故现场帮助伤者。
3.现状:国外的相关技术已经趋于成熟并已广泛用于现实生活中,国内相关虽有研究但应用方面却处于起步阶段。
研究目标、研究内容和准备解决的问题:1.目标:通过设计一个基于GSM的车辆紧急求救系统,实现对事故车辆定位信息的采集,求救信号的发送以及对救护中心(用户手机)的自动应答。
2.内容:利用GSM模块和GPS模块与MCU实现车辆紧急求救系统。
3.准备解决的问题:事故信号的采集,GSM模块和GPS模块与MCU的通信,求救短信的发送以及语音通话的自动应答。
拟采取的方法、技术或设计(开发)工具:软件环境:1.电路图设计Protel 99 SE2.编译软件Keil C51 V6.12硬件环境:1.STC12C5A60S2单片机2.GSM模块TC35i3.GPS模块REB-3310预期成果:1.毕业设计成果基于GSM的车辆紧急求救系统的设计2.毕业论文进度计划:2009.12.1 - 2010.3.5:查找资料、搜集相关素材2010.3.6 - 2010.3.26:完成需求分析2010.3.27 - 2010.4.7:完成概要设计2010.4.8 - 2010.4.15:完成电路图设计2010.4.16 - 2010.4.28:完成程序设计2010.4.29 - 2010.5.15:整理资料、撰写毕业论文2010.5.16 - 2010.5.20:根据导师要求,完善毕业设计和论文指导教师对选题报告的意见:同意开题指导教师签名:年月日河南大学2010届毕业论文(设计、创作)任务书题目名称基于GSM的车辆紧急求救系统的设计毕业论文(设计、创作)要求1. 可行性分析:完成系统的技术可行性分析2. 系统设计:对系统中用到的关键技术进行初步设计3. 程序开发:对系统程序进行设计4. 撰写论文:完成论文撰写毕业论文(设计、创作)进度安排2009.12.1 - 2010.3.5:查找资料、搜集相关素材2010.3.6 - 2010.3.26:完成需求分析2010.3.27 - 2010.4.7:完成概要设计2010.4.8 - 2010.4.15:完成电路图设计2010.4.16 - 2010.4.28:完成程序设计2010.4.29 - 2010.5.15:整理资料、撰写毕业论文2010.5.16 - 2010.5.20:根据导师要求,完善毕业设计和论文三、需收集的资料和指导性参考文献[1]郭天祥. 51单片机C语言教程. 电子工业出版社. 2009年12月[2]王坚. 基于GSM的汽车防盗报警器的设计与实现. 华中科技大学硕士学位论文. 2006月10月2号[3]孙育才. 单片微型计算机及其应用(第四版). 东南大学出版社.2004年3月[4]贺良. 基于GSM短消息的无线数据监测系统. 上海海运学院. 硕士学位论文.2003年6月[5]李智慧,王丽军,赵春明.基于GSM和SMS的车辆防盗报警系统.汽车电器.2005年5月[6] RoyalTek.REB-3310 Operational Manual.RoyalTek Company LTD.2005年4月[7]罗强. 基于单片机的嵌入式工程开发详解. 电子教育出版社.2009年1月[8]于永.戴佳.常江.51单片机C语言常用模块与综合系统设计.电子工业出版社.2007年4月指导教师签名:年月日河南大学2010届毕业设计(论文、创作)中期检查表题目名称:基于GSM的车辆紧急求救系统的设计一、毕业论文(设计、创作)进展情况目前,项目的大致框架已基本完成。
毕业论文 基于GSM的汽车远程防盗报警系统

毕业论文基于GSM的汽车远程防盗报警系统摘要系统利用GSM网络的短消息业务设计一种汽车远程控制防盗报警系统,并且以GSM网络作为远程信号的传榆平台,详细描述了系统的软硬件设计,硬件设计主要有单片机控制系统电路、传感器的选型、GSM通讯模块接口等,软件设计包括系统软件整体流程、数据采集流程和GSM通讯流程等。
关键词:GSM网络;远程控制;防盗报警系统;数据采集AbstractThe system designs one kind of automobile long—distance control security alarm system using the GSM netwoik short news service,this system by the GSM network took the long—distance signal the transmission Plafform,the Paper in detail described the system software and hardware,design the hardware design mainly had the monolithic integrated circuit control system electric circuit,the sensor shaping,the GSM communication module connection and 80 on;Software design including systems of software overall flow,data acquisition flow and GSM communication flow and so on.Keywords:GSM Network;Long-Distance Control;Security Alarm System;Data Acquisition目录第一章引言 01.1 课题背景 01.2 相关概念 01.2.1 GSM网络 01.2.2 什么是GSM报警系统 (1)1.3 设计意义 (1)1.4 报告内容安排 (2)第二章原理性说明 (2)2.1汽车远程控制防盗报警系统原理 (2)第三章自己所做工作的总体说明 (3)3.1系统方案设计 (3)第四章自己所做工作的详细说明 (4)4.1系统硬件设计 (4)4.1.1防盗数据采集电路设计 (4)4.1.2传感器电路设计 (5)4.1.3 GSM模块的通讯 (6)4.2 系统的软件设计 (6)4.2.1数据采集程序 (6)4.2.2 GSM通讯程序 (7)4.3阐述基于G S M的汽车安防系统设计目的及意义 (8)4.4归纳和总结汽车防盗技术的发展现状及趋势 (9)4.4.1国内研究现状 (9)4.4.2国外研究现状 (10)4.4.3 汽车防盗技术发展趋势 (12)第五章结论与展望 (13)5.1 本文结论 (13)5.2 不足之处与下一步工作 (13)致谢 (14)参考文献 (15)第一章引言1.1 课题背景近年来.随着我国人民生活水平的不断提高和汽车工业的高速发展。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
I.J. Computer Network and Information Security, 2014, 3, 37-43Published Online February 2014 in MECS (/)DOI: 10.5815/ijcnis.2014.03.05Modeling GSM Based Network Communicationin Vehicular NetworkM. Milton JoeAssistant Professor, Department of Computer Application,St. Jerome’s College, Nagercoil, Tamilnadu, India.Email: tonjoe@Dr. B. RamakrishnanAssociate Professor, Department of Computer Science and Research Centre,S.T. Hindu College, Nagercoil, Tamilnadu, India.Email: ramsthc@Dr. R. S. ShajiProfessor, Department of IT, Noorul Islam University, Nagercoil, Tamilnadu, India.Email: shajiswaram@,Abstract —Obviously fair communication establishment in every technology increases the efficiency. As we know well, vehicles are used in day to day life of every human being to move from one location to another location. If network communication is formed between vehicles, mobile phones and home based telephones, it will increase the safety of the passengers by communicating with one another. In this paper, we propose GSM based network communication in vehicles, which will develop reliable network communication between vehicles, mobile phones and home based telephones. The added advantage GSM based network communication among vehicles will lead to safety of travel by tracking the vehicle’s location, since GSM based network communication is established in vehicles.Index Terms —VANET, Network Communication, GSM, Security, Location Tracking, Efficiency, Safety.I.INTRODUCTIONModeling network communication with two or more vehicles, while move on the road is called VANET [1] [2] [3]. This vehicular network is a wireless network communication established with wireless technologies [1]. This vehicular network communication is also similar to mobile ad-hoc network called MANET, where in MANET the nodes could move at random and in VANET the nodes can move only on the prescribed roads [1] [2] [4]. The same protocol used in MANET can be used in VANET also to transmit and receive the messages [1] [2]. All this network communication is established between vehicles only. In this paper, we model a new network communication that establishes the communication among vehicles, mobile phones, help lines and home based telephones.The above Fig. 1 represents the simple way of communication established in GSM based vehicles. That i s network communication is established between GSM based vehicles, mobile phones, help lines and home based telephonesFigure. 1: GSM based CommunicationThe various types of communication can be such as Short Message Service (SMS), Voice Call, Multimedia Messaging Service (MMS) and vehicle tracking system. This sort of network communication established in vehicles will help a lot to communicate with one another in an easy manner and especially the vehicle can traced out easily, when hijack or some sort of disaster happens to the vehicles, while moving on the road. As all know well vehicle move even very faster on the highway. In this situation unexpected things may occur to the vehicle. At that time the driver or the passengers could be able to communicate with the other sources such as help lines found on thehighwayor even to other mobile devices. In this emergency situation the vehicle should be equipped to communicate with others sources to protect it. In order to bring the safety of the passengers and the vehicle some sort of network communication should be formed. In this paper we have proposed and implemented GSM based network communication in the vehicle to form the network communication among the vehicle, mobile phones, and help lines on highway and home based telephones. The proposed scheme increases the safety of the passengers along with the vehicle during the emergency cases. This type of GSM based communication is ultimately needed to track the entire history of the vehicle, when some serious mishap or hijack of the vehicle takes place.The proposed model establishes network communication among vehicles, mobile phones, help lines and home based telephone. Once communication is established among them, they can communicate with one another with the help of GSM technology. GSM technology should be included in the vehicle during manufacturing it. This GSM communication model allows to exchange messages with other vehicle, mobile phone, help lines and home based telephone. GSM communication model not only used for communication but also it is used to track the entire history of the vehicle, wherever it has traveled. This vehicle tracking model helps a lot during hijack. The rest of the paper represents.II. ATED WORKVehicular communication is almost similar to the MANET communication. In MANET communication the nodes can be moved from one location to another location at random fashion, however in VANET the nodes are considered as vehicles that could move only the road [5]. VANET is the most advanced version of MANET and all the features of MANET could be applied to VANET also [5]. VANET enables the communication between moving vehicles and the Road Side Units (RSU) that are available on the highways and the city environment [6]. The On Board Unit (OBU) is equipped to transmit and receive the messages between vehicle and RSU [7]. To provide safer travel Intelligent Transport System (ITS) was developed and it provides necessary alerts [8]. All the protocols used in MANET can also be used in VANET [9]. Various research works have been taken so far in vehicular network but no work has been taken to establish GSM based wireless communication in vehicular network.When we go through the previous works carried out so far indicates clearly that all the works concentrated establishing communication among vehicle and Road Side U n i t(RSU) [1] [2]. The vehicle move on the road could be able to communicate with Road Side Unit [3] [4]. This road side unit is established with the help of towers, which are highly expensive. The vehicle move on the road is always connected with the road side unit in the form of wireless medium to pass the message. The road side unit receives the message from one vehicle and forward the message to the other vehicles that move on the road [3] [4]. Since the communication with the road side unit made up of towers are highly expensive, this form of communication cannot be established in all the countries. However the inter vehicle communication is highly required to communicate with the others vehicles while moving.So a new way of communication model is need, which will be less cost effective. Another new approach was developed by forming network communication among vehicles by Bluetooth technologies [1] [2]. The inter vehicle wireless communication established by Bluetooth technology helps a lot to the vehicular network to communicate with one another. This network communication allows vehicles to send message to another vehicle, while moving on the highway. This communication module helps a lot during emergency cases. The network communication established by Bluetooth technology should be prevented from the hackers [2]. Fair architecture developed to prevent the network communication established by Bluetooth from the hackers. The communication established with the help of Bluetooth technology will lead to out of coverage, while the vehicle communicate with one another. The communication range of Bluetooth is just 10 meter, which will lead to out of coverage. Hence the communication by Bluetooth technology cannot establish a fair communication among the vehicles that move on the road. The communication with the help of road side unit is very costly, which cannot be formed in all the countries. The communication with Bluetooth technology will lead to out of coverage area often, since the vehicle move faster on the highway.However a new communication model id needed to overcome the disadvantages of the existing communication model. The proposed GSM communication model will overcome the disadvantages of the existing communication model and this GSM communication model will bring out reliable communication among vehicles, mobile phones, help lines and home based telephones. The GSM technology is already available in all the countries, so forming network communication with the help of GSM technology is quite easy and less cost effective. Once GSM communication is implemented in the vehicles, the entire vehicle history can be tracked regardless wherever the vehicle has moved. In this paper, we have modeled GSM based network communication in VANET.III. STEM MODELA. Architecture RepresentationThe Fig. 2 describes he entire architecture model of the proposed system. As indicated in the architecture, the GSM based mobile network vehicle can establish thecommunication with the other GSM enabled vehicle, Mobile phones, Help lines and home based telephone. The proposed G S M based mobile network communication will bring out certain useful metrics, as shown in the architecture diagram. Establishing the communication model among vehicle, mobile phone, help line and home based telephone using GSM based mobile network communication lead to the following metrics, such as SMS, MMS, Voice call, Help line and Vehicle tracking model.Figure 2: Architecture RepresentationB. GSM Enabled VehicleThe proposed system model is based on GSM network technology. Every vehicle is manufactured at the manufacturing factories and designed in a luxuries way. However we propose, all the vehicles should be manufactured wi t h GSM based network model to take effect of the proposed system. The GSM based network device must be placed at the middle of the front of the vehicle and that could be able to operate by the both driver and the co- passengers, whoever sits in the front seat. The device should come out with the touch pad to operate the GSM network device on the vehicle and it should come out with the head phone to answer the voice call and so on. As we all know that every mobile phone should get charged to continue functioning. However the GSM based network mobile device installed at the vehicle should be designed in such a way that gets charging, while the vehicle is moving on the highway and the backup should remain, when the vehicle is not functioning. Once the device is installed properly, the SIM card can be inserted into the vehicle for establishing the communication. Getting the signal (tower) strength could be achieved by the same signal towers used to get the signals for the hand based mobile phones. This type of manufacturing vehicle will establish the new way of network communication among vehicles and wi t h other communicating devices such as mobile phones, help lines and home based telephones ultimately. If the proposed system come to effect, it will be helpful almost all the passengers for they can communicate with other sources and the vehicle can be easily tracked for its entire history. For instance, if a vehicle is stolen or hijacked it could be easily tracked wherever the vehicle has moved by the GSM based network communication established in the vehicle.C. Performance EvaluationThis type of installing GSM network model device in the vehicle will bring out all the benefits available in the normal mobile phones, because the same mobile phone device is manufactured with the vehicle to form the network communication. Some of the major benefits of the proposed system is listed and described below.∙Short Message Service (SMS)∙Multimedia Message Service (MMS)∙Voice Call∙Help Line Communication∙Vehicle Tracking Modela. Short Message Service (SMS)Short Message Service (SMS) is a process of sending short message to other devices through a mobile network. Vv cv cvc cv vc cv cv vc When GSM based mobile network is installed in the vehicle, the vehicle could be able to send short messages to other devices at any time. This message services will be helpful to the passengers to communicate with other sources such as mobile phones, help lines, home based telephones and even to other GSM based vehicles. When a vehicle move on the highway, this messaging service will be helpful a lot to send short messages to the others sources and even to the help lines found on the highway. To make the scheme work effectively the following proposed methodology should be maintained. A separate SIM card should be sold at the shop that is only designed for the vehicles. This SIM card must contains all the help line numbers sate wise stored in a predefined manner. The short message service should be allowed at free of cost to the help line numbers. Thus the short message servicewillbring out the safety of the passengers, while moving on the vehicle because they could be able to send short messages to the help lines and other sources during the emergency situations.As represented in the Fig. 3 the short message service (SMS) can be sent to other vehicles, mobile phones and mainly to the help lines, which will be helpful to bring out the safety of the passengers.V- Vehicle, M- Mobile, H- Help LineFigure. 3: SMS Communication Modelb. Multimedia Messaging Service (MMS)Another benefit of modeling GSM based mobile network communication in vehicular network is passing Multimedia Messaging Service (MMS) formally known a s MMS. This facility helps a lot to p a ss or send some sort of images or pictures and short video clips from one device to other devices. When GSM based mobile network is incorporated in t h e vehicle, the vehicle can be able to send MMS to the help lines and other sources such as mobile phones and so on. This feature allows the vehicles to send the road condition status and even any mishap happened on the highway may be communicated with the help lines (all the help lines numbers are stored already state wise) and necessary action can be taken as early as possible. However, due to rain or any weather conditions the road condition might be changed, which may lead to major accidents. This MMS feature will help a lot to prevent it by communicating with the help line in time.V- Vehicle, M- Mobile, H- Help LineFigure. 4: MMS Communication ModelThe Fig. 4 shows the way of passing MMS to the other help lines, mobile phones and other GSM based vehicles, which will bring to the notice of the road condition and some sort of mishap happened on the highway.c. Voice CallVoice call facility is the major added advantage of GSM based mobile network communication. Using this facility, the vehicle could communicate with any other vehicle, mobile phones and help lines at any time. The users can answer the voice call or make voice call with the help of headphone associated with it. This voice can be connected with any source at any time. However this metric will be helpful a lot to make calls to the help lines at the highway during emergency situations such as break down of the vehicle, no fuel and s o on. All the help lines numbers should be stored at the SIM card state wise and the voice call should be connected at any time. The proposed system enables GSM based mobile network communication among the vehicle, mobile phones, help lines and home based telephones. The only thing is the signal strength should be perfect at the highway also. Thus, the proposed GSM based mobile network communication brings the effective communication in vehicular network and with other network sources.d. Help Line CommunicationAt every highway, we could find help line units to help the vehicle during emergency situations. However these help lines is available at longer distance and they may not come to know, what happened at long distance and they may not be able to help the vehicle in time. In order to help the vehicle in time at emergency cases, it is obviously GSM based mobile network communication is needed. Once GSM based mobile network communication is established at every vehicle, the vehicle will have all the help line numbers stored state wise available in all over the country. This sort of help lines numbers stored already at the SIM card will help the vehicle to communicate withthehelp lines at any time to extend some sort of help from them. While we travel on the highway, we could find the road condition unsafe and that could be informed to the help lines to take the immediate action at once. However the vehicle may get break down on highway especially during night times, those times the vehicle must need the help from the help units found in the highway. In these situations communication with the help lines is must. So to make a reliable communication with the help line in time, the GSM based mobile network communication is needed. This communication will help a lot, when some sort of mishap found on the highway and these communication will prevent others mishaps i n the highway. So network communication to the help lines is ultimately needed.e. Vehicle Tracking ModelThe major add metric of this GSM based mobile network communication is vehicle tracking Model. The benefit of this metric is t h e e n t i r e vehicle history and the current location of the vehicle can be easily identified. The total distance traveled by the vehicle and the total time taken to travel the distance can be identified by the GSM based mobile network communication in vehicular network. This added advantage will be helpful to identify the vehicle, when the vehicle is stolen or hijacked by the hijackers. Thus, the above major advantages proposed above prove the worth of the GSM based mobile network communication in vehicular network.Figure. 5: Cell Representation in GSM NetworkThe above Fig. 5 shows the cell representation in GSM mobile network. Each cell is named with unique name for its identification. Each cell is active area, where mobile network signal (tower) is available. Every highway is covered with the active cell to produce the continuous signal strength for better communication. The vehicle tracking system could be achieved with the help of these active cells. When a vehicle moves on the highway, it will get the signal strength from any one of the active cell with the help of this active cell, we can identify the current location of the vehicle and where the vehicle is currently moving towards further with the next active cell, when vehicle reaches. Thus, the location of the vehicle and the entire vehicle moving history can be easily identified. This information will be helpful a lot to identify the vehicle, when it has been stolen or hijacked. The above Fig. 6 shows the vehicle route from source (S) to destination (D). The vehicle moves on the highway within the active cell region, so the vehicle route and its current location can be easily tracked. Figure. 6: Vehicle moving from source to destination withinthe active cells.As indicated in the Fig 6, the vehicle moves from source (S) to destination (D) with the following active cells α, α1, β1, β2, α4, λ4, β4, λ4. Let’s consider each active cell covers 50 meters distance and the vehicle moves 100 kmph. The current location of the vehicle is known by the active cell’s unique name and distance traveled by the vehicle and the time taken to travel the distance can be calculated by the values as shown below. The total distance traveled by the vehicle can be calculated as follows.DT = α + α1 + β1 + β2 + α4 + λ4 + β4 + λ4 (1) From the equation (1), DT refers the total distance traveled by the vehicle. Let’s consider each active cell’s coverage is 50 m, so the total distance traveled by the vehicle could be identified easily.DT = 50 + 50 + 50 + 50 + 50 + 50 + 50 + 50DT = 400 mSimilarly the total time taken to reach the DT can be calculated as shown below. T = DT / SPWhere,T = Time DT = Distance SP = SpeedT = 400 m / 100 Kmph T = (100 * 5 /18) m/ sec T = 400 / 27. 8 m/sec T = 14. 39 m/secFigure. 7: Distance and TimeThe Fig. 7 shows the distance traveled by the vehicle and the time taken to reach the distance based on the above calculation. The total distance traveled is 400 m and the time taken to reach the distance is 14.39 m /sec. As described above the total distance and total time taken can be calculated. Thus, the vehicle tracking model proves its worthiness.CONCLUSIONIn this paper, we have studied the comprehensive characteristic of vehicular network and we modeled a new GSM based mobile n e t w o r k communication i n vehicular network. The proposed GSM based network communication establishes network communication between vehicle, mobile phones, help lines and home based telephones. This GSM based network communication proves its effectiveness by the metrics obtained by the network communication. The metric of the GSM based mobile network communication are SMS, MMS, Voice call, Help line and Vehicle tracking Model.REFERENCES[1] M. Mil ton Joe, R.S. Shaji, R. Thulasi, ―ModelingNetwork Communication in VANET using Bluetooth Technology‖, International Journal of Advanced and Innovative Research, Vol 2 No 3, PP. 643-651, March - 2013.[2] M. Milton Joe, R.S. Shaji, K. AshokKumar,"Establishing Inter Vehicle Wireless Communication in Vanet and Preventing It from Hackers ", IJCNIS, vol.5, no.8, pp.55-61, 2013. DOI: 10.5815/ijcnis.2013.08.07.[3] B. Ramakrishnan, Dr. R. S. Rajesh, R. S. Shaji,―An efficient vehicular communication outside the city environments ‖ International Journal of Next-Generation Networks (IJNGN) Vol.2, No.4, December 2010.[4] B.Ramakrishnan, Dr.R.S.Rajesh, R.S.Shaji, ―AnIntelligent Routing Protocol for Vehicle safety communication i n Highway Environments ‖, journal of computing-Volume 2, Issue 11, November 2010dec 2010.[5] Saxena, N.; Tsudik, G.; Jeong Hyun Yi;Polytech. Univ., Brooklyn ‖Efficient Node Admission and Certificateless Secure Communication in Short-Lived MANETs ‖, Parallel and Distributed Systems, IEEE Transactions - Feb. 2009, Volume: 20 Issue: 2 on page(s): 158 – 170.[6] Lin Yang Jingdong Xu Gongyi Wu Jinhua Guo,Nankai Univ Tianjin, China ―Road Probing: RSU Assisted Data Collection in Vehicular Networks ‖ Wireless Communications, Networking and Mobile Computing, Beijing, page: 1-4.[7] Wern-Yarng Shieh Wei-Hsun Lee Shen, ‖Analysisof the Optimum Conuration of Roadside Units and On board Units in Dedicated Short-Range Communication Systems ‖, Intelligent Transportation Systems, IEEE Transactions on Issue Date : Dec. 2006 Volume :7, Issue:4 On page(s): 565 – 571. [8] Biswas, S. Misic, J. ―Proxy signature-based RSUmessage broadcasting in VANETs ‖, Communications (QBSC), 2010 25th Biennial Symposium on Date: 12-14 May 2010 on page(s): 5 - 9 Location: Kingston. [9] Tuteja, Asma G ujral, Rajneesh Thalia, Sunil,‖Comparative Performance Analysis of DSDV, AODV and DSR Routing Protocols in MANET Using NS2‖, A CE, International Conference on 2010, page(s): 330 – 333.Mr. M. Milton Joe received his B.Sc Computer Science degree from Bharathidasan University,India and MCA degree from Anna Universityin India. Presentlyhe is working as Assistant Professor at St. Jerome’s College in Nagercoil, India. He has two years of research experienceand authored seven research papers in reputed international journals. His research interests include Network Security, Network Communication, Vehicular Network and Social Networks.Dr. B. Ramakrishnan is currentlyworking as Associate Professor in theDepartment of Computer Science andresearch Centre in S.T. HinduCollege, Nagercoil. He received hisM.Sc degree from Madurai KamarajUniversity, Madurai and received Mphil (Comp. Sc.) from Alagappa University Karikudi. He earned his Doctorate degree in the field of Computer Science from Manonmaniam Sundaranar University, Tirunelveli. He has a teaching experience of 26 years. His research interests lie in the field of Vehicular networks, mobile network and communication, Cloud computing, Green computing, Ad-hoc networks and Network security.Dr. R.S. Shaji received his M.Techin Computer Science and Engineeringfrom Pondicherry University. Heearned his Doctorate degree in thefield of Computer science andEngineering from ManonmaniamSundaranar University. Presently he is working as Professor in Noorul Islam University. He has eight years of research experience and published more than twenty five international journals. His research interests include Mobile and pervasive Networks.Howto cite this paper: M. Milton Joe, B. Ramakrishnan, R. S. Shaji,"Modeling GSM Based NetworkCommunication in Vehicular Network", IJCNIS, vol.6, no.3, pp.37-43, 2014. DOI: 10.5815/ijcnis.2014.03.05。