744029004;中文规格书,Datasheet资料
10-10-01 08-04-01 07-07-01
...............................................
Geprüft / checked
Kontrolliert / approved
Datum / date
D-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.de
E Testbedingungen / test conditions:
Luftfeuchtigkeit / humidity: Umgebungstemperatur / temperature: 33% +20° C
F Werkstoffe & Zulassungen / material & approvals:
C Lötpad / soldering spec.:
[mm]
3,2 1,0 1,2 1,0
L RDC typ. RDC max. IN Isat SRF
4,7 170 200 1,0 0,8 65
µH mΩ mΩ A A MHz
D Prüfgeräte / test equipment:
WAYNE KERR 3260B für/for L0; ISAT HP 34401 A & Fluke 54II für/for IDC; Metra HIT 27I für/for RDC
Spezifikation für Freigabe / specification for release
Kunde / customer : Artikelnummer / part number : Bezeichnung : description :
744029004
SPEICHERDROSSEL WE-TPC POWER-CHOKE WE-TPC DATUM / DATE : 2010-10-01
XXX
XXX
C
A B C
4,00 ± 0,1 8,00 ± 0,1 12,0 ± 0,2
mm mm mm
B
End
Start
no component / 160 mm min.
components feeding direction
no components / 400 mm min.
a
b
d
Rollenspezifikation / Reel specification: a 178,0 ± 2,0 b 21,00 ± 0,8 c 13,00 ± 0,5 d 50,00 ± 1,0
10-10-01 08-04-01 07-07-01
...............................................
Geprüft / checked
Kontrolliert / approved
Datum / date
D-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.de
A Mechanische Abmessungen / dimensions:
A
size A B C D E
2813 2,8 ± 0,2 2,8 ± 0,2 1,35 ± 0,15 0,9 typ. 0,9 typ. mm mm mm mm mm
C D
xxxx
B
E D
@@FR M 1@@
B Elektrische Eigenschaften / electrical properties:
SEITE 2 VON 3
/
Spezifikation für Freigabe / specification for release
Kunde / customer : Artikelnummer / part number : Bezeichnung : description :
Datum / date
Unterschrift / signature Würth Elektronik
............................................
ME ME ME Name
Version 3 Version 2 Version 1 Änderung / modification
Datum / date
Unterschrift / signature Würth Elektronik
........................ME ME Name
Version 3 Version 2 Version 1 Änderung / modification
Kunde / customer
..................................................................................
..................................................................................
Datum / date
Unterschrift / signature Würth Elektronik
............................................
ME ME ME Name
Version 3 Version 2 Version 1 Änderung / modification
744029004
SPEICHERDROSSEL WE-TPC POWER-CHOKE WE-TPC DATUM / DATE : 2010-10-01
I Rollenspezifikation / tape and reel specification:
A
Gurtspezifikation / Tape specification:
744029004
SPEICHERDROSSEL WE-TPC POWER-CHOKE WE-TPC DATUM / DATE : 2010-10-01
H Induktivitätskurve / Inductance curve:
Induktivität vs Strom (typ.)/ Inductance vs Current (typ.)
Basismaterial / base material: Draht / wire: Endoberfläche / finishing electrode: Ferrit/ ferrite Class H /180° C Ag/Ni/Sn
G Eigenschaften / general specifications:
10-10-01 08-04-01 07-07-01
...............................................
Geprüft / checked
Kontrolliert / approved
Datum / date
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
744028002;中文规格书,Datasheet资料
description :size A mm B mm C mm D mm EmmEigenschaften / properties Wert / valueEinheit / unittol.Induktivität /inductanceDC-Widerstand /DC-resistance DC-Widerstand /DC-resistance Nennstrom /rated Current Sättigungsstrom /saturation current Eigenres.-Frequenz /self-res.-fequency33% Umgebungstemperatur / temperature:+20°CFerrit/ ferrite ME 10-10-01ME 08-04-01ME 07-07-01NameDatum / date2811Änderung / modificationVersion 1Version 2Version 3Betriebstemp. / operating temperature: -40°C - + 125°C 2,8 ± 0,2Basismaterial / base material:Draht / wire:Class H /180°C Luftfeuchtigkeit / humidity:F Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:E Testbedingungen / test conditions:Metra HIT 27I für/for R DCFreigabe erteilt / general release:Kunde / customer...........................................................................................2,8 ± 0,21,0typ.1,3A 0,9 typ.0,9 typ.1,1 ± 0,10HP 34401 A & Fluke 54II für/for I DC; WAYNE KERR 3260B für/for L 0; I SAT D Prüfgeräte / test equipment:It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Würth Elektronik..................................................................................http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked DATUM / DATE : 2010-10-01max.Testbedingungen / test conditions 155±30%Endoberfläche / finishing electrode:Ag/Ni/SnC Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:Umgebungstemp. / ambient temperature: -40°C - + 85°C 100POWER-CHOKE WE-TPCµH R DC max.Lo A Mechanische Abmessungen / dimensions:100 kHz / 10mAR DC typ.1252,2@ 20°C ∆L/L = < 35%typ.I N m Ω@ 20°C m Ωtyp.SRFMHz∆T = 40 K typ.I sat A ABCxxxxDDE [mm]1,01,23,21,0description :ME 10-10-01ME 08-04-01ME 07-07-01NameDatum / dateVersion 2Version 3....................................................................................................................................................................POWER-CHOKE WE-TPCDATUM / DATE : 2010-10-01H Induktivitätskurve / Inductance curve:Datum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customerD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationhttp://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedVersion 10,000,501,001,502,002,500,000,200,400,600,801,001,20L (µH )Current (A)Induktivität vs Strom (typ.)/ Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 4,00± 0,1mmB 8,00± 0,1mmC 12,0± 0,2mma 178,0± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mmd 50,00± 1,0mmME 10-10-01ME 08-04-01ME 07-07-01NameDatum / datehttp://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Änderung / modificationVersion 1Version 2Version 3Gurtspezifikation / Tape specification:Rollenspezifikation / Reel specification:Unterschrift / signature POWER-CHOKE WE-TPCDATUM / DATE : 2010-10-01ABCØ cadbno component / 160 mm min.componentsno components / 400 mm min.End Startfeeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.XXX XXX分销商库存信息: WURTH-ELECTRONICS 744028002。
0424920290;中文规格书,Datasheet资料
/
42492
Group Header No: Pin No: OPTIONS Plating: Pin Length L Mating Dim. Y PC Tail Tin Loc Pack Per Ckts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 REV: ECR/ECN INFORMATION: EC No.: DATE: TITLE: Material No 26-64-5020 26-64-5030 26-64-5040 26-64-5050 26-64-5060 26-64-5070 26-64-5080 26-64-5090 26-64-5100 26-64-5110 26-64-5120 P T M Gold Loc G A-42492-0002/0018 41790-0036/0052 43294-0572 197 – TIN 27.94/1.100 11.43 / .450 N/A 5.41/ .213 3.96 / .156 OVERALL NONE PK-42492-002 Engineer Number A-42492-0002 A-42492-0003 A-42492-0004 A-42492-0005 A-42492-0006 A-42492-0007 A-42492-0008 A-42492-0009 A-42492-0010 A-42492-0011 A-42492-0012 Group Header No: Pin No: Plating: Pin Length L Mating Dim. Y PC Tail Tin Loc Pack Per Material No 42492-0319 42492-0320 42492-0321 42492-0322 42492-0323 42492-0324 42492-0325 42492-0326 42492-0327 42492-0328 42492-0329 P T M Gold Loc G A-42492-0319/0335 41790-0036/0052 43294-0569 208 – 15 GOLD 27.94/1.100 11.43/. 450 6.86/. 270 5.41/ .213 3.96/ . 156 5.08 / .200 NONE PK-42492-002 Engineer Number A-42492-0319 A-42492-0320 A-42492-0321 A-42492-0322 A-42492-0323 A-42492-0324 A-42492-0325 A-42492-0326 A-42492-0327 A-42492-0328 A-42492-0329 Group Header No: Pin No: Plating: Pin Length L Mating Dim. Y PC Tail Tin Loc Pack Per Material No 42492-0336 42492-0337 42492-0338 42492-0339 42492-0340 42492-0341 42492-0342 42492-0343 42492-0344 42492-0345 42492-0346 P T M Gold Loc G A-42492-0336/0352 41790-0036/0052 43294-0570 228 – 30 GOLD 27.94/1.100 11.43/. 450 6.86/. 270 5.41/ .213 3.96/. 156 5.08 / .200 NONE PK-42492-002 Engineer Number A-42492-0336 A-42492-0337 A-42492-0338 A-42492-0339 A-42492-0340 A-42492-0341 A-42492-0342 A-42492-0343 A-42492-0344 A-42492-0345 A-42492-0346 Group Header No: Pin No: Plating: Pin Length L Mating Dim. Y PC Tail Tin Loc Pack Per Material No Engineer Number P T M Gold Loc G
74271112S;中文规格书,Datasheet资料
7.1 7.0 6.02012-06-272012-04-302008-01-03SStSStSMuSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm] Additional FeaturesSafety key to lock/ unkock STAR-CLIP Fixation74271 7427711D2 General Properties:Ferrite core Ferrite core Ferrite core Plastic housing Plastic housing Test cable Test cablePropertiesMaterial Initial permeability Curie temperatureColourFlammability ClassificationApplicable cable Applicable cable lengthµi T CValue 4 W 620620150Black UL94-V0AWG2690Unit°Cmm Tol.typ.typ.F Typical Impedance Characteristics:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-STAR TECof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.The packaging of the product is to encase the needed humidity of the plastic housing. To ensure the humidity level, the products have to be stored in this delivered packaging. If not, the products are losing their humidity. In this case you can re-condition the components according to the internal standard WE1883 to ensure the necessary humidity in the plastic.To ensure the operating mode of the product, the ambient temperature at processing (when the part will be mounted on the cable) has to be in the range of 15 to 25 °C.Before mounting, the part should be stored for one hour in this condition.The responsibility for the applicability of customer specific products and the use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Direct mechanical impact to the product and the forcible closing of this shall be prevented as the ferrite material of the ferrite body or the pla-stic housing could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The cable diameter must be pointed out, otherwise no warranty will be sustained.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 74271112S。
74408943100;中文规格书,Datasheet资料
4.2 4.1 4.0 3.02012-06-282012-05-222012-05-072011-10-05SStSStSStCZSStCZCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Inductance vs. Current Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-SPCof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the iron powder material of the core could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 74408943100。
0440670402;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44067-0402Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0™ Wire-to-Board Header, Dual Row, Vertical for up to 3.56mm Thick PCB, 4 Circuits, 0.38µm Gold (Au) Selective PlatingDocuments:3D ModelTest Summary TS-43045-002 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-43045 (PDF)GeneralProduct Family PCB Headers Series44067Application Power, Wire-to-BoardComments High Temperature, Polarization Key to PCB OverviewMicro-Fit 3.0™ Connectors Product Name Micro-Fit 3.0™UPC800754773225PhysicalBreakawayNo Circuits (Loaded)4Circuits (maximum)4Color - ResinBlack Durability (mating cycles max)30First Mate / Last Break No Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part None Lock to Mating PartYes Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Net Weight0.741/g Number of Rows 2Orientation Vertical PC Tail Length 4.01mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.60mm Packaging TypeTray Pitch - Mating Interface3.00mm Pitch - Termination Interface 3.00mm Plating min - Mating0.381µm Plating min - Termination 2.540µm Polarized to PCB Yes Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating -40°C to +105°CTermination Interface: StyleThrough Hole - Kinked Pin ElectricalCurrent - Maximum per Contact 5A Voltage - Maximum250VSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44067SeriesMates With43025 Micro-Fit™ HeaderSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature3Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-43045Sales Drawing SD-44067-001Test Summary TS-43045-002This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0440670402。
7491181012;中文规格书,Datasheet资料
description :TBr 2006-07-31NameDatum / dateFreigabe erteilt / general release:D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Würth Elektronik eiSos GmbH & Co.KG...............................................Kunde / customerWürth Elektronik....................................................................................................................................................................Off-line transformer WE-UNITDatum / dateUnterschrift / signature ..................................................Kontrolliert / approvedVersion 1Geprüft / checked Änderung / modificationdescription :Off-line transformer WE-UNITDATUM / DATE : 2006-07-31H Schaltbild / SchematicsTBr 2006-07-31NameDatum / dateWürth ElektronikFreigabe erteilt / general release:Kunde / customerDatum / dateUnterschrift / signature ...................................................................................................................................................................................................................Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Version 1Änderung / modification..................................................Geprüft / checked Kontrolliert / approved46This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7491181012。
0190030074;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19003-0074Status:ActiveDescription:InsulKrimp™ Quick Disconnect, Female, for 18-22 (0.80-0.35mm²), Mylar Tape, Tab 5.21 x 0.51mmDocuments:Drawing (PDF)Product Specification PS-19902-015 (PDF)Product Specification PS-19902-008 (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-19902-011 (PDF)Agency CertificationULE79133GeneralProduct Family Quick Disconnects Series19003CommentsFunnel Entry Crimp Quality Equipment YesProduct Name InsulKrimp™Type Quick Disconnect UPC800753029644PhysicalBarrel Type Closed Color - Resin Natural Flammability 94V-2GenderFemale Glow-Wire Compliant NoInsulationNylon (PA)Lock to Mating Part None Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight 0.693/g OrientationStraightPackaging Type Adhesive Tape on Reel Plating min - Mating4.064µm Plating min - Termination 4.064µm Polarized to Mating Part NoTab Thickness 0.51mm Tab Width5.21mmTemperature Range - Operating -65°C to +105°CTermination Interface: Style Crimp or Compression Wire Insulation Diameter 3.43mm max.Wire Size AWG 18, 20, 22Wire Size mm²0.35 - 0.80ElectricalVoltage - Maximum600V Material InfoOld Part NumberAA-2213TReference - Drawing NumbersProduct Specification PS-19902-008, PS-19902-011, PS-19902-015Sales DrawingSD-19003-005Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19003SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Mini-Mac™Applicator0638857000ATP Perishable Tool Kit Used in ATPPresses that Process Product on Tape0192880049This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0190030074。
0739440202;中文规格书,Datasheet资料
This document was generated on 08/09/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:73944-0202Status:ActiveOverview:HDM®Description:2.00mm Pitch HDM® Board-to-Board Backplane Header, Vertical, SMC, Solder Tail,Guide Pin Option, 72 CircuitsDocuments:3D ModelProduct Specification PS-73670-9999 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family Backplane Connectors Series73944ApplicationBackplane Component Type PCB Header OverviewHDM®Product Name HDM®Style N/AUPC822348638505PhysicalCircuits (Loaded)72Circuits (maximum)72Color - ResinBlack, Natural Durability (mating cycles max)250First Mate / Last Break No Flammability94V-0Guide to Mating Part Yes Keying to Mating Part YesMaterial - MetalPhosphor Bronze, Stainless Steel Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Number of Columns 12Number of Pairs Open Pin Field Number of Rows 6Orientation Vertical PC Tail Length 2.00mm PCB Locator No PCB RetentionNone PCB Thickness - Recommended 2.50mm Packaging TypeTube Pitch - Mating Interface2.00mm Pitch - Termination Interface 2.00mm Plating min - Mating0.762µm Plating min - Termination 2.540µm Polarized to PCB No StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating -55°C to +105°C Termination Interface: StyleThrough HoleSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 73944SeriesMates With73632 HDM PLUS® Board-to-Board Daughtercard Receptacle. 73780 HDM®Board-to-Board Daughtercard Receptacle Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Extraction Tool 0621001000Backplane Insertion Signal Contact Tool0621001400ElectricalCurrent - Maximum per Contact1AData Rate 1.0 GbpsReal Signals (per 25mm)75Shielded NoVoltage - Maximum250V ACMaterial InfoReference - Drawing NumbersProduct Specification PS-73670-9999Sales Drawing SD-73944-001HDM and High Density Metric are trademarks of Amphenol CorporationThis document was generated on 08/09/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0739440202。
0190120034;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19012-0034Status:ActiveDescription:Avikrimp™ Fully Insulated Piggyback Quick Disconnect, Tab 6.35 x 0.81mm, 10-12AWG, Yellow Insulator, TapeDocuments:Drawing (PDF)Product Specification PS-19902-014 (PDF)Product Specification PS-19902-011 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR18689ULE79133GeneralProduct Family Quick Disconnects Series19012Crimp Quality Equipment YesProduct Name InsulKrimp™Type Quick Disconnect UPC822350959919PhysicalBarrel Type Closed Flammability 94V-2GenderFemale Glow-Wire Compliant NoInsulationNylon (PA)Lock to Mating Part No Material - Metal Brass Net Weight 1.919/g OrientationStraightPackaging TypeAdhesive Tape on Reel Polarized to Mating Part Yes Tab Thickness 0.81mm Tab Width6.35mm Temperature Range - Operating 105°CWire Insulation Diameter 5.71mm max.Wire Size AWG 10, 12Wire Size mm²3.30 - 5.00ElectricalVoltage - Maximum300V AC Material InfoOld Part NumberC-8303TReference - Drawing NumbersProduct Specification PS-19902-011, PS-19902-014Sales DrawingSD-19012-001Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19012SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Hand Crimp Tool 0640016400Crimp Dies for MTA-105 Tape Applicator used in TM-2000™ Press,and ATP-301 Air Crimping Press for Mylar Tape Mounted Terminals0198002170This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0190120034。
0746952603;中文规格书,Datasheet资料
This document was generated on 08/10/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:74695-2603Status:ActiveOverview:VHDM-HSD™ Backplane ConnectorsDescription:2.00mm Pitch 5-Row VHDM-HSD™ Backplane Header, Guide Pin Signal Module,Open End Version, Advanced Mate Shield, 100 Circuits, Pin Length 4.25mm.Series:74702 Enables designers to create custom loaded connectors utilizing standard pin lengths 4.25, 4.75, 5.15 and 6.25mmDocuments:Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-74031-999 (PDF)Agency CertificationCSALR19880GeneralProduct Family Backplane Connectors Series74695ApplicationBackplaneApplication Tooling Documents TM-622010999Comments Advanced mate shield chevron can be used for the first mate last break (FMLB) grounding ponent Type PCB HeaderOverviewVHDM-HSD™ Backplane Connectors Product Name VHDM-HSD™Style N/AUPC756054878958PhysicalCircuits (Loaded)100Circuits (maximum)100Color - ResinBlack Durability (mating cycles max)200First Mate / Last Break No Flammability94V-0Guide to Mating Part No Keying to Mating Part NoneMaterial - MetalHigh Performance Alloy (HPA)Material - Plating MatingGold Material - Plating Termination Tin-LeadMaterial - Resin High Temperature Thermoplastic Net Weight8.867/g Number of Columns 25Number of Pairs Open Pin Field Number of Rows 5Orientation Vertical PC Tail Length 2.50mm PCB Locator No PCB RetentionNone PCB Thickness - Recommended 1.80mm Packaging TypeTube Pitch - Mating Interface2.00mm Pitch - Termination Interface 2.00mm Plating min - Mating0.762µm Plating min - Termination 0.762µm Polarized to PCBYesSeriesimage - Reference onlyEU RoHSChina RoHSRoHS Compliant by Exemption REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 74695SeriesMates WithHSD Daughtercards 74680 , 74686Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #5-Row Pin and Shield Repair Tool 06220158105-Row Shield Extraction Tool 0622016010Signal Header, 5-Row by 25-Wide,50.00mm0622020202Surface Mount Compatible (SMC)YesTemperature Range - Operating-55°C to +105°CTermination Interface: Style Through Hole - Compliant PinElectricalCurrent - Maximum per Contact1AData Rate 5.0 GbpsShield Type Ground Plane ShieldShielded YesVoltage - Maximum120V AC (RMS)/DCMaterial InfoReference - Drawing NumbersProduct Specification PS-74031-999Sales Drawing SD-74695-003VHDM-HSD is a trademark of Amphenol CorporationThis document was generated on 08/10/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0746952603。