外文翻译规范要求及模版格式
毕业论文外文翻译格式【范本模板】
因为学校对毕业论文中的外文翻译并无规定，为统一起见,特做以下要求：1、每篇字数为1500字左右，共两篇；2、每篇由两部分组成:译文+原文.3 附件中是一篇范本，具体字号、字体已标注。
外文翻译（包含原文)(宋体四号加粗）外文翻译一（宋体四号加粗）作者：(宋体小四号加粗）Kim Mee Hyun Director, Policy Research & Development Team，Korean Film Council（小四号）出处：(宋体小四号加粗)Korean Cinema from Origins to Renaissance(P358～P340) 韩国电影的发展及前景（标题：宋体四号加粗）1996～现在数量上的增长(正文:宋体小四）在过去的十年间，韩国电影经历了难以置信的增长。
上个世纪60年代，韩国电影迅速崛起，然而很快便陷入停滞状态,直到90年代以后，韩国电影又重新进入繁盛时期。
在这个时期，韩国电影在数量上并没有大幅的增长，但多部电影的观影人数达到了上千万人次。
1996年，韩国本土电影的市场占有量只有23.1%。
但是到了1998年，市场占有量增长到35。
8%，到2001年更是达到了50%。
虽然从1996年开始，韩国电影一直处在不断上升的过程中，但是直到1999年姜帝圭导演的《生死谍变》的成功才诞生了韩国电影的又一个高峰。
虽然《生死谍变》创造了韩国电影史上的最高电影票房纪录，但是1999年以后最高票房纪录几乎每年都会被刷新。
当人们都在津津乐道所谓的“韩国大片”时，2000年朴赞郁导演的《共同警备区JSA》和2001年郭暻泽导演的《朋友》均成功刷新了韩国电影最高票房纪录.2003年康佑硕导演的《实尾岛》和2004年姜帝圭导演的又一部力作《太极旗飘扬》开创了观影人数上千万人次的时代。
姜帝圭和康佑硕导演在韩国电影票房史上扮演了十分重要的角色。
从1993年的《特警冤家》到2003年的《实尾岛》，康佑硕导演了多部成功的电影。
毕业论文 外文翻译格式
毕业论文外文翻译格式毕业论文外文翻译格式在撰写毕业论文时，外文翻译是一个重要的环节。
无论是引用外文文献还是翻译相关内容，都需要遵循一定的格式和规范。
本文将介绍一些常见的外文翻译格式，并探讨其重要性和应用。
首先，对于引用外文文献的格式，最常见的是使用APA（American Psychological Association）格式。
这种格式要求在引用外文文献时，先列出作者的姓氏和名字的首字母，然后是出版年份、文章标题、期刊名称、卷号和页码。
例如：Smith, J. D. (2010). The impact of climate change on biodiversity. Environmental Science, 15(2), 145-156.在翻译外文文献时，需要注意保持原文的准确性和完整性。
尽量避免意译或添加自己的解释，以免歪曲原文的意思。
同时，还需要在翻译后的文献后面加上“译者”和“翻译日期”的信息，以便读者可以追溯翻译的来源和时间。
其次，对于翻译相关内容的格式，可以参考国际标准组织ISO（International Organization for Standardization）的格式。
这种格式要求在翻译相关内容时，先列出原文，然后是翻译后的文本。
例如：原文：The importance of effective communication in the workplace cannot be overstated.翻译：工作场所有效沟通的重要性不容忽视。
在翻译相关内容时，需要注意保持原文的意思和语气。
尽量使用准确的词汇和语法结构，以便读者能够理解和接受翻译后的内容。
同时，还需要在翻译后的文本后面加上“翻译者”和“翻译日期”的信息，以便读者可以追溯翻译的来源和时间。
此外，对于长篇外文文献的翻译，可以考虑将其分成若干章节，并在每个章节前面加上章节标题。
这样可以使读者更容易理解和阅读翻译后的内容。
外文翻译规范要求及模版格式
外文翻译规范要求及模版格式
外文中文翻译规范要求及模板格式可以根据具体需求和要求有所不同，以下是一般常见的外文中文翻译规范要求及模板格式：
1.规范要求：
-符合语法、语言规范和语义准确性；
-译文流畅自然，符合中文表达习惯；
-忠实准确地传达原文信息；
-注意统一使用特定的术语翻译；
-文章结构、段落、标题等要与原文一致；
-保持适当的篇幅，不过度增加或删减内容；
-遵守保密原则。
2.模板格式：
-文章标题（与原文保持一致，可放在正文上方）；
-标题（与原文保持一致）；
-段落（与原文保持一致，首行缩进）；
-字体（常用宋体或黑体，一般字号12或14）；
-行间距（一般1.5倍，可根据需要调整）；
-页边距（上下左右均为2.5厘米）；
-段落间距（一般1.5倍，可根据需要调整）；
以上是一般常见的外文中文翻译规范要求及模板格式，具体要求和格式可以根据具体的翻译项目和要求进行调整。
在翻译过程中，保持准确、流畅、专业是非常重要的。
外文翻译与文献综述模板格式以及要求说明
外文翻译与文献综述模板格式以及要求说明
外文中文翻译格式：
标题：将外文标题翻译成中文，可以在括号内标明外文标题
摘要：将外文摘要翻译成中文，包括问题陈述、研究目的、方法、结果和结论等内容。
关键词：将外文关键词翻译成中文。
引言：对外文论文引言进行翻译，概述问题的背景、重要性和研究现状。
方法：对外文论文方法部分进行翻译，包括研究设计、数据采集和分析方法等。
结果：对外文论文结果部分进行翻译，介绍研究结果和统计分析等内容。
讨论：对外文论文讨论部分进行翻译，对研究结果进行解释和评价。
结论：对外文论文结论部分进行翻译，总结研究的主要发现和意义。
附录：如果外文论文有附录部分，需要进行翻译并按照指定的格式进行排列。
文献综述模板格式：
标题：文献综述标题
引言：对文献综述的背景、目的和方法进行说明。
综述内容：按照时间、主题或方法等进行分类，对相关文献进行综述，可以分段进行描述。
讨论：对综述内容进行解释和评价，概括主要研究成果和趋势。
结论：总结文献综述，概括主要发现和意义。
要求说明：
1.外文中文翻译要准确无误，语句通顺流畅，做到质量高、符合学术
规范。
2.文献综述要选择与所研究领域相关的文献进行综述，覆盖面要广，
内容要全面、准确并有独立思考。
4.文献综述要注重整体结构和逻辑连贯性，内容要有层次感，段落间
要过渡自然。
5.外文中文翻译和文献综述要进行查重，确保原文与译文的一致性，
并避免抄袭和剽窃行为。
专业中英文翻译规范
翻译规范——Format（2011年修订版）请仔细阅读以下规定。
本篇大部分规定为格式方面的规定，而部分翻译项目则可能对其格式另有特殊规定。
1. SPACE（空格）除非有特别指示，请在每个翻译项目的中文文字（双字节字符）和英文字或数字（均为单字节）之间留一个单字节空格。
Example 1:今天是2002 年5 月26 日正确。
今天是2002 年5 月26 日错误，数字前没有留出一个单字节空格。
今天是2002 年5 月26 日错误，2 个中文字间无需留出一个空格。
欲知以上各行间有何区别，可到Word > 工具> 选项> 视图> “格式标记”下选择“全部”或者“隐藏文字”。
Example 2:熟练操作WINDOWS 98 中文环境。
在“作”和“W”，“S”和“9”，及“8”和“中”之间都需要留出一个空格。
英文字或数字位于句首或句末的，则无需留空。
Example 1:2002 年5 月26 日是个重要的日子。
正确。
2002 年5 月26 日是个重要的日子错误，句首无须留出一个空格。
Example 2:他的英文名叫做John。
正确。
他的英文名叫做John 。
地址: 福州左海帝景3座1105室网址: 错误，句末无须留出一个空格。
2. PUNCTUATION（标点符号）usage1) 中文须使用双字节标点符号，如，。
、“”！；：; 英文则须使用单字节标点符号, . , “” ! ; :。
双字节标点符号和单字节标点符号的区示：输入状态不同，即双字节标点符号须在中文输入状态下输入，而单字节标点符号须在英文状态下输入；For example:“计算机世界”杂志要用双字节引号，“Computer World” 应使用单字节英文引号。
2) 英文中并列的单字节逗号“,”，中文翻译要改成双字节顿号“、” 等。
3) 书名、协议名称、法律合同规章名称译成英文时应该采用斜体形式，中文时则应在其名称前后加上书名号《》。
毕业设计(论文)外文资料和译文格式要求(模板)
成都东软学院外文资料和译文格式要求一、译文必须采用计算机输入、打印，幅面A4。
外文资料原文（复印或打印）在前，译文在后，于左侧装订。
二、具体要求1、至少翻译一篇内容与所选课题相关的外文文献。
2、译文汉字字数不少于4000字。
3、正文格式要求：宋体五号字。
译文格式参见《译文格式要求》，宋体五号字，单倍行距。
纸张纸张为A4纸，页边距上2.54cm、下2.54cm、左3.17cm、右3.17cm。
装订外文资料原文（复印或打印）在前，译文在后封面封面的专业、班级、姓名、学号等信息要全部填写正确。
封面指导教师必须为讲师以上职称，若助教则需要配备一名讲师协助指导。
讲师在前，助教在后。
指导教师姓名后面空一个中文空格，加职称。
页眉页眉说明宋体小五，左端“XX学院毕业设计（论文）”，右端“译文”。
页眉中的学院名称要与封面学院名称一致。
字数本科4000字。
附：外文资料和译文封面、空白页成都东软学院外文资料和译文专业：软件工程移动互联网应用开发班级：2班姓名：罗荣昆学号：12310420216指导教师：2015年 12月 8日Android page layoutUsing XML-Based LayoutsW hile it is technically possible to create and attach widgets to our activity purely through Java code, the way we did in Chapter 4, the more common approach is to use an XML-based layout file. Dynamic instantiation of widgets is reserved for more complicated scenarios, where the widgets are not known at compile-time (e g., populating a column of radio buttons based on data retrieved off the Internet).With that in mind, it’s time to break out the XML and learn how to lay out Android activities that way.What Is an XML-Based Layout?As the name suggests, an XML-based layout is a specification of widgets’ relationships to each other—and to their containers (more on this in Chapter 7)—encoded in XML format. Specifi cally, Android considers XML-based layouts to be resources, and as such layout files are stored in the res/layout directory inside your Android project.Each XML file contains a tree of elements specifying a layout of widgets and their containers that make up one view hierarchy. The attributes of the XML elements are properties, describing how a widget should look or how a container should behave. For example, if a Button element has an attribute value of android:textStyle = "bold", that means that the text appearing on the face of the button should be rendered in a boldface font style.Android’s SDK ships with a tool (aapt) which uses the layouts. This tool should be automatically invoked by your Android tool chain (e.g., Eclipse, Ant’s build.xml). Of particular importance to you as a developer is that aapt generates the R.java source file within your project, allowing you to access layouts and widgets within those layouts directly from your Java code. Why Use XML-Based Layouts?Most everything you do using XML layout files can be achieved through Java code. For example, you could use setTypeface() to have a button render its textin bold, instead of using a property in an XML layout. Since XML layouts are yet another file for you to keep track of, we need good reasons for using such files.Perhaps the biggest reason is to assist in the creation of tools for view definition, such as a GUI builder in an IDE like Eclipse or a dedicated Android GUI designer like DroidDraw1. Such GUI builders could, in principle, generate Java code instead of XML. The challenge is re-reading the UI definition to support edits—that is far simpler if the data is in a structured format like XML than in a programming language. Moreover, keeping generated XML definitions separated from hand-written Java code makes it less likely that somebody’s custom-crafted source will get clobbered by accident when the generated bits get re-generated. XML forms a nice middle ground between something that is easy for tool-writers to use and easy for programmers to work with by hand as needed.Also, XML as a GUI definition format is becoming more commonplace. Microsoft’s XAML2, Adobe’s Flex3, and Mozilla’s XUL4 all take a similar approach to that of Android: put layout details in an XML file and put programming smarts in source files (e.g., JavaScript for XUL). Many less-well-known GUI frameworks, such as ZK5, also use XML for view definition. While “following the herd” is not necessarily the best policy, it does have the advantage of helping to ease the transition into Android from any other XML-centered view description language. OK, So What Does It Look Like?Here is the Button from the previous chapter’s sample application, converted into an XMLlayout file, found in the Layouts/NowRedux sample project. This code sample along with all others in this chapter can be found in the Source Code area of .<?xml version="1.0" encoding="utf-8"?><Button xmlns:android="/apk/res/android"android:id="@+id/button"android:text=""android:layout_width="fill_parent"android:layout_height="fill_parent"/>The class name of the widget—Button—forms the name of the XML element. Since Button is an Android-supplied widget, we can just use the bare class name. If you create your own widgets as subclasses of android.view.View, you would need to provide a full package declara tion as well.The root element needs to declare the Android XML namespace:xmlns:android="/apk/res/android"All other elements will be children of the root and will inherit that namespace declaration.Because we want to reference this button from our Java code, we need to give it an identifier via the android:id attribute. We will cover this concept in greater detail later in this chapter.The remaining attributes are properties of this Button instance:• android:text indicates the initial text to be displayed on the button face (in this case, an empty string)• android:layout_width and android:layout_height tell Android to have the button’swidth and height fill the “parent”, in this case the entire screen—these attributes will be covered in greater detail in Chapter 7.Since this single widget is the only content in our activity, we only need this single element. Complex UIs will require a whole tree of elements, representing the widgets and containers that control their positioning. All the remaining chapters of this book will use the XML layout form whenever practical, so there are dozens of other examples of more complex layouts for you to peruse from Chapter 7 onward.What’s with the @ Signs?Many widgets and containers only need to appear in the XML layout file and do not need to be referenced in your Java code. For example, a static label (TextView) frequently only needs to be in the layout file to indicate where it should appear. These sorts of elements in the XML file do not need to have the android:id attribute to give them a name.Anything you do want to use in your Java source, though, needs an android:id.The convention is to use @+id/... as the id value, where the ... represents your locally unique name for the widget in question. In the XML layout example in the preceding section, @+id/button is the identifier for the Button widget.Android provides a few special android:id values, of the form @android:id/.... We will see some of these in various chapters of this book, such as Chapters 8 and 10.We Attach These to the Java How?Given that you have painstakingly set up the widgets and containers in an XML layout filenamed main.xml stored in res/layout, all you need is one statement in your activity’s onCreate() callback to use that layout:setContentView(yout.main);This is the same setContentView() we used earlier, passing it an instance of a View subclass (in that case, a Button). The Android-built view, constructed from our layout, is accessed from that code-generated R class. All of the layouts are accessible under yout, keyed by the base name of the layout file—main.xml results in yout.main.To access our identified widgets, use findViewById(), passing in the numeric identifier of the widget in question. That numeric identifier was generated by Android in the R class asR.id.something (where something is the specific widget you are seeking). Those widgets are simply subclasses of View, just like the Button instance we created in Chapter 4.The Rest of the StoryIn the original Now demo, the button’s face would show the current time, which would reflect when the button was last pushed (or when the activity was first shown, if the button had not yet been pushed).Most of that logic still works, even in this revised demo (NowRedux). However,rather than instantiating the Button in our activity’s onCreate() callback, we can reference the one from the XML layout:package youts;import android.app.Activity;import android.os.Bundle;import android.view.View;import android.widget.Button; import java.util.Date;public class NowRedux extends Activity implements View.OnClickListener { Button btn;@Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);btn=(Button)findViewById(R.id.button);btn.setOnClickListener(this);upd ateTime();}public void onClick(View view) { updateTime();}private void updateTime() {btn.setText(new Date().toString()); }}The first difference is that rather than setting the content view to be a view we created in Java code, we set it to reference the XML layout (setContentView(yout.main)). The R.java source file will be updated when we rebuild this project to include a reference to our layout file (stored as main.xml in our project’s res/l ayout directory).The other difference is that we need to get our hands on our Button instance, for which we use the findViewById() call. Since we identified our button as @+id/button, we can reference the button’s identifier as R.id.button. Now, with the Button instance in hand, we can set the callback and set the label as needed.As you can see in Figure 5-1, the results look the same as with the originalNow demo.Figure 5-1. The NowRedux sample activity Employing Basic WidgetsE very GUI toolkit has some basic widgets: fields, labels, buttons, etc. Android’s toolkit is no different in scope, and the basic widgets will provide a good introduction as to how widgets work in Android activities.Assigning LabelsThe simplest widget is the label, referred to in Android as a TextView. Like in most GUI toolkits, labels are bits of text not editable directly by users. Typically, they are used to identify adjacent widgets (e.g., a “Name:” label before a field where one fills in a name).In Java, you can create a label by creating a TextView instance. More commonly, though, you will create labels in XML layout files by adding a TextView element to the layout, with an android:text property to set the value of the label itself. If you need to swap labels based on certain criteria, such as internationalization, you may wish to use a resource reference in the XML instead, as will be described in Chapter 9. TextView has numerous other properties of relevance for labels, such as:• android:typeface to set the typeface to use for the label (e.g., monospace) • android:textStyle to indicate that the typeface should be made bold (bold), italic (italic),or bold and italic (bold_italic)• android:textColor to set the color of the label’s text, in RGB hex format (e.g., #FF0000 for red)For example, in the Basic/Label project, you will find the following layout file:<?xml version="1.0" encoding="utf-8"?><TextView xmlns:android=/apk/res/androidandroid:layout_width="fill_parent"android:layout_height="wrap_content"android:text="You were expecting something profound?" />As you can see in Figure 6-1, just that layout alone, with the stub Java source provided by Android’s p roject builder (e.g., activityCreator), gives you the application.Figure 6-1. The LabelDemo sample applicationButton, Button, Who’s Got the Button?We’ve already seen the use of the Button widget in Chapters 4 and 5. As it turns out, Button is a subclass of TextView, so everything discussed in the preceding section in terms of formatting the face of the button still holds. Fleeting ImagesAndroid has two widgets to help you embed images in your activities: ImageView and ImageButton. As the names suggest, they are image-based analogues to TextView and Button, respectively.Each widget takes an android:src attribute (in an XML layout) to specify what picture to use. These usually reference a drawable resource, described in greater detail in the chapter on resources. You can also set the image content based on a Uri from a content provider via setImageURI().ImageButton, a subclass of ImageView, mixes in the standard Button behaviors, for responding to clicks and whatnot.For example, take a peek at the main.xml layout from the Basic/ImageView sample project which is found along with all other code samples at : <?xml version="1.0" encoding="utf-8"?><ImageView xmlns:android=/apk/res/androidandroid:id="@+id/icon"android:layout_width="fill_parent"android:layout_height="fill_parent"android:adjustViewBounds="true"android:src="@drawable/molecule" />The result, just using the code-generated activity, is shown in Figure 6-2.Figure 6-2. The ImageViewDemo sample applicationFields of Green. Or Other Colors.Along with buttons and labels, fields are the third “anchor” of most GUI toolkits. In Android, they are implemented via the EditText widget, which is a subclass of the TextView used for labels.Along with the standard TextView properties (e.g., android:textStyle), EditText has many others that will be useful for you in constructing fields, including:• android:autoText, to control if the fie ld should provide automatic spelling assistance• android:capitalize, to control if the field should automatically capitalize the first letter of entered text (e.g., first name, city) • android:digits, to configure the field to accept only certain digi ts • android:singleLine, to control if the field is for single-line input or multiple-line input (e.g., does <Enter> move you to the next widget or add a newline?)Beyond those, you can configure fields to use specialized input methods, such asandroid:numeric for numeric-only input, android:password for shrouded password input,and android:phoneNumber for entering in phone numbers. If you want to create your own input method scheme (e.g., postal codes, Social Security numbers), you need to create your own implementation of the InputMethod interface, then configure the field to use it via android: inputMethod.For example, from the Basic/Field project, here is an XML layout file showing an EditText:<?xml version="1.0" encoding="utf-8"?><EditTextxmlns:android=/apk/res/androidandroid:id="@+id/field"android:layout_width="fill_parent"android:layout_height="fill_parent"android:singleLine="false" />Note that android:singleLine is false, so users will be able to enter in several lines of text. For this project, the FieldDemo.java file populates the input field with some prose:package monsware.android.basic;import android.app.Activity;import android.os.Bundle;import android.widget.EditText;public class FieldDemo extends Activity { @Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);EditText fld=(EditText)findViewById(R.id.field);fld.setText("Licensed under the Apache License, Version 2.0 " + "(the \"License\"); you may not use this file " + "except in compliance with the License. You may " + "obtain a copy of the License at " +"/licenses/LICENSE-2.0");}}The result, once built and installed into the emulator, is shown in Figure 6-3.Figure 6-3. The FieldDemo sample applicationNote Android’s emulator only allows one application in the launcher per unique Java package. Since all the demos in this chapter share the monsware.android.basic package, you will only see one of these demos in your emulator’s launcher at any one time.Another flavor of field is one that offers auto-completion, to help users supply a value without typing in the whole text. That is provided in Android as the AutoCompleteTextView widget and is discussed in Chapter 8.Just Another Box to CheckThe classic checkbox has two states: checked and unchecked. Clicking the checkbox toggles between those states to indicate a choice (e.g., “Ad d rush delivery to my order”). In Android, there is a CheckBox widget to meet this need. It has TextView as an ancestor, so you can use TextView properties likeandroid:textColor to format the widget. Within Java, you can invoke: • isChecked() to determi ne if the checkbox has been checked• setChecked() to force the checkbox into a checked or unchecked state • toggle() to toggle the checkbox as if the user checked itAlso, you can register a listener object (in this case, an instance of OnCheckedChangeListener) to be notified when the state of the checkbox changes.For example, from the Basic/CheckBox project, here is a simple checkbox layout:<?xml version="1.0" encoding="utf-8"?><CheckBox xmlns:android="/apk/res/android"android:id="@+id/check"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="This checkbox is: unchecked" />The corresponding CheckBoxDemo.java retrieves and configures the behavior of the checkbox:public class CheckBoxDemo extends Activityimplements CompoundButton.OnCheckedChangeListener { CheckBox cb;@Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);cb=(CheckBox)findViewById(R.id.check);cb.setOnCheckedChangeListener(this);}public void onCheckedChanged(CompoundButton buttonView,boolean isChecked) {if (isChecked) {cb.setText("This checkbox is: checked");}else {cb.setText("This checkbox is: unchecked");}}}Note that the activity serves as its own listener for checkbox state changes since it imple ments the OnCheckedChangeListener interface (via cb.setOnCheckedChangeListener(this)). The callback for the listener is onCheckedChanged(), which receives the checkbox whose state has changed and what the new state is. In this case, we update the text of the checkbox to reflect what the actual box contains.The result? Clicking the checkbox immediately updates its text, as you can see in Figures 6-4 and 6-5.Figure 6-4. The CheckBoxDemo sample application, with the checkbox uncheckedFigure 6-5. The same application, now with the checkbox checkedTurn the Radio UpAs with other implementations of radio buttons in other toolkits, Android’s radio buttons are two-state, like checkboxes, but can be grouped such that only one radio button in the group can be checked at any time.Like CheckBox, RadioButton inherits from CompoundButton, which in turn inherits fromTextView. Hence, all the standard TextView properties for font face, style, color, etc., are available for controlling the look of radio buttons. Similarly, you can call isChecked() on a RadioButton to see if it is selected, toggle() to select it, and so on, like you can with a CheckBox.Most times, you will want to put your RadioButton widgets inside of aRadioGroup. The RadioGroup indicates a set of radio buttons whose state is tied, meaning only one button out of the group can be selected at any time. If you assign an android:id to your RadioGroup in your XML layout, you can access the group from your Java code and invoke:• check() to check a specific radio button via its ID (e.g., group.check(R.id.radio1))• clearCheck() to clear all radio buttons, so none in the group are checked• getCheckedRadioButtonId() to get the ID of the currently-checked radio button (or -1 if none are checked)For example, from the Basic/RadioButton sample application, here is an XML layout showing a RadioGroup wrapping a set of RadioButton widgets: <?xml version="1.0" encoding="utf-8"?> <RadioGroupxmlns:android=/apk/res/androidandroid:orientation="vertical"android:layout_width="fill_parent"android:layout_height="fill_parent" ><RadioButton android:id="@+id/radio1"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Rock" /><RadioButton android:id="@+id/radio2"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Scissors" /><RadioButton android:id="@+id/radio3"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Paper" /></RadioGroup>Figure 6-6 shows the result using the stock Android-generated Java forthe project and this layout.Figure 6-6. The RadioButtonDemo sample application Note that the radio button group is initially set to be completely unchecked at the outset. To pre-set one of the radio buttons to be checked, use either setChecked() on the RadioButton or check() on the RadioGroup from within your onCreate() callback in your activity.It’s Quite a ViewAll widgets, including the ones previously shown, extend View, and as such give all widgets an array of useful properties and methods beyond those already described.Useful PropertiesSome of the properties on View most likely to be used include:• Controls the focus sequence:• android:nextFocusDown• android:nextFocusLeft• android:nextFocusRight• android:nextFocusUp• android:visibility, which controls wheth er the widget is initially visible• android:background, which typically provides an RGB color value (e.g., #00FF00 for green) to serve as the background for the widgetUseful MethodsYou can toggle whether or not a widget is enabled via setEnabled() and see if it is enabled via isEnabled(). One common use pattern for this is to disable some widgets based on a CheckBox or RadioButton selection.You can give a widget focus via requestFocus() and see if it is focused via isFocused(). You might use this in concert with disabling widgets as previously mentioned, to ensure the proper widget has the focus once your disabling operation is complete.To help navigate the tree of widgets and containers that make up an activity’s overall view, you can use:• get Parent() to find the parent widget or container• findViewById() to find a child widget with a certain ID• getRootView() to get the root of the tree (e.g., what you provided to the activity via setContentView())Android 页面布局使用XML进行布局虽然纯粹通过Java代码在activity上创建和添加部件，在技术上是可行的，我们在第4章中做的一样，更常见的方法是使用一种基于XML的布局文件。
毕业论文外文资料翻译【范本模板】
毕业论文外文资料翻译题目(宋体三号，居中）学院（全称，宋体三号，居中)专业(全称，宋体三号，居中）班级（宋体三号,居中）学生（宋体三号，居中）学号（宋体三号,居中)指导教师(宋体三号，居中)二〇一〇年月日(宋体三号，居中，时间与开题时间一致）（英文原文装订在前)Journal of American Chemical Society, 2006, 128(7）: 2421-2425. (文献翻译必须在中文译文第一页标明文献出处:即文章是何期刊上发表的,X年X卷X 期,格式如上例所示,四号，右对齐，杂志名加粗。
)［点击输入译文题目—标题1,黑体小二][点击输入作者，宋体小四］[点击输入作者单位，宋体五号］摘要［点击输入，宋体五号]关键词［点击输入,宋体五号]1［点击输入一级标题-标题2，黑体四号］［点击输入正文，宋体小四号，1。
25倍行距］1。
1［点击输入二级标题-标题3，黑体小四］［点击输入正文,宋体小四，1。
25倍行距]1.1。
1[点击输入三级标题-标题4，黑体小四］［点击输入正文,宋体小四，1。
25倍行距］说明：1.外文文章必须是正规期刊发表的。
2.翻译后的中文文章必须达到2000字以上，并且是一篇完整文章。
3.必须要有外文翻译的封面,使用学校统一的封面；封面上的翻译题目要写翻译过来的中文题目；封面上时间与开题时间一致。
4.外文原文在前，中文翻译在后；5.中文翻译中要包含题目、摘要、关键词、前言、全文以及参考文献,翻译要条理清晰，中文翻译要与英文一一对应.6.翻译中的中文文章字体为小四，所有字母、数字均为英文格式下的，中文为宋体,标准字符间距。
7.原文中的图片和表格可以直接剪切、粘贴，但是表头与图示必须翻译成中文。
8.图表必须居中，文章段落应两端对齐、首行缩进2个汉字字符、1.25倍行距。
例如:图1. 蛋白质样品的PCA图谱与8-卟啉识别排列分析(a)或16—卟啉识别排列分析（b).为了得到 b的数据矩阵，样品用16—卟啉识别排列分析来检测，而a 是通过捕获首八卟啉接收器数据矩阵从b 中萃取的.。
外文翻译与文献综述模板格式以及要求说明
杭州电子科技大学信息工程学院毕业论文外文文献翻译要求根据《普通高等学校本科毕业设计（论文）指导》的内容，特对外文文献翻译提出以下要求：一、翻译的外文文献可以是一篇，也可以是两篇，但总字符要求不少于1.5万（或翻译成中文后至少在3000字以上）。
二、翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并作为外文参考文献列入毕业论文（设计）的参考文献。
并在每篇中文译文首页用“脚注”形式注明原文作者及出处，中文译文后应附外文原文。
三、中文译文的基本撰写格式为：1.题目:采用小三号、黑体字、居中打印；2.正文:采用小四号、宋体字，行间距一般为固定值20磅，标准字符间距。
页边距为左3cm，右2.5cm，上下各2.5cm，页面统一采用A4纸。
四、封面格式由学校统一制作（注：封面上的“翻译题目”指中文译文的题目），并按“封面、译文一、外文原文一、译文二、外文原文二、考核表”的顺序统一装订。
五、忌自行更改表格样式。
毕业论文外文文献翻译毕业设计（论文）题目Xxx翻译（1）题目指翻译后的中文译文的题目翻译（2）题目指翻译后的中文译文的题目系会计系以本模板为准）专业XXXXXX（以本模板为准）姓名XXXXXX（以本模板为准）班级XXXXXX（以本模板为准）学号XXXXXX（以本模板为准）指导教师XXXXXX（以本模板为准）正文指导教师对外文翻译的评语：指导教师（签名）年月日建议成绩（百分制）评阅小组或评阅人对外文翻译的评语：评阅小组负责人或评阅人（签名）年月日建议成绩（百分制）杭州电子科技大学信息工程学院本科毕业论文文献综述的写作要求为了促使学生熟悉更多的专业文献资料，进一步强化学生搜集文献资料的能力，提高对文献资料的归纳、分析、综合运用能力及独立开展科研活动的能力，现对本科学生的毕业设计（论文）提出文献综述的写作要求，具体要求如下：一、文献综述的概念文献综述是针对某一研究领域或专题搜集大量文献资料的基础上，就国内外在该领域或专题的主要研究成果、最新进展、研究动态、前沿问题等进行综合分析而写成的、能比较全面地反映相关领域或专题历史背景、前人工作、争论焦点、研究现状和发展前景等内容的综述性文章。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
(二)外文翻译
每位学生必须阅读2篇以上(10000字符左右)的外文材料，应完成5000汉字以上的英译汉翻译。
加“外文翻译”封面，全文1.5倍行距。
原文可用A4纸复印,每篇原文后附译文(即中文不要直接翻译在原文的同一页)。
模板
外 文 翻 译
毕业设计题目：
原文1
译文1
原文2
译文2：
封面
左边距：3.0cm 右边距：2.5cm 上边距：2.5cm 下边距：2.5cm
(
(原文1)Headaches: A slowdown in traditional newspaper advertising. The proliferation of media choices, especially the Internet, threaten to cannibalize both readership and prestige.
出处：
正文
左边距：3.0cm 右边距：2.5cm
上边距：2.5cm
下边距：2.5cm
段落缩进：2字符
行距：1.5倍
另起一页(译文标题)
(译文1)最头痛的事：传统报纸广告量下降。
随着越来越多的媒体出现在人们面前，
出处：
特别说明：如原文系纸质的，请按A4尺寸复印，字迹清晰，页面正直(不要歪斜)，周边干净，如是PDF格式提供PDF文档，装订时再打印。