百斯腾电暖器说明书
重量级风扇式天花板挂壁暖气说明书
HEAVY-DUTY FAN-FORCEDCEILING-MOUNT HEATERINSTRUCTION MANUALMODEL: EH-4604PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONSPET OWNERS WARNING: Health warning for some small pets, including birds,as they are extremely sensitive to the fumes produced during the first-time useof many appliances. These fumes are not harmful to humans but werecommend that you do not use your heater around birds and small petsduring its initial use until the manufacturing corrosion (anti-corrosion)coatings burn off.Technical Support: 1-866-206-0888Serviceemail:*****************TABLE OF CONTENTS Important Instructions (3)Description and Specifications (4)General Safety Information (4)Locating the heater (5)Installation........................................................6-8 Connecting the power........................................8-10 Operating Instructions.......................................11-12 Maintenance Instructions (12)IMPORTANT INSTRUCTIONSWHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYSBE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE FOLLOWING:1. Read all instructions before installing or using this heater.2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.Keep combustible materials, such as furniture, pillows, bedding, papers, clothes andcurtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.3. Extreme caution is necessary when any heater is used by or near children or invalids. Donot leave the heater operating if unattended.4. Always turn the heater off when not in use.5. Do not operate any heater after it malfunctions, had been dropped or damaged in anymanner. Disconnect power at the service panel and have heater inspected by areputable electrician before reusing.6. Do not use outdoors.7. This heater is not intended for use in bathrooms, laundry areas and similar indoorlocations. Never locate heater where it may fall into a bathtub or other water container.8. To disconnect heater, turn controls to off, and turn off power to heater circuit at maindisconnect panel.9. Do not insert or allow any foreign objects to enter any ventilation or exhaust opening asthis may cause an electric shock or fire or damage the heater.10. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not useon soft surfaces, like a bed, where openings may be blocked.11. A heater has hot and arcing or sparking parts inside. Do not use it in areas wheregasoline, paint, or flammable liquids are used or stored.12. All wiring must be carried out by a certified electrician and must be in accordance withnational and local electrical codes in Canada.13. Use this heater only as described in this manual. Any other use not recommended by themanufacturer may cause fire, electric shock, or personal injury.14. This heater may include a visual alarm to warn that parts of the heater are gettingexcessively hot. If the alarm illuminates, immediately turn the heater off and inspect for any objects on or adjacent to the heater that may have blocked the airflow or otherwise cause high temperatures. DO NOT OPERATE THE HEATER WITH THE ALARMILLUMINATING.15. This appliance is not intended for use by persons (including children) with reducedphysical, sensory or mental capabilities, or lack of experience and knowledge, unlessthey have been given supervision or instruction concerning use of the appliance by aperson responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.SAVE THESE INSTRUCTIONS:DESCRIPTIONThe heavy-duty electric heater is designed for garages, workshops and similar locations. It features three heat settings, for a maximum heat production of 17,065 BTU per hour. It includes horizontal and vertical air flow and a built-in thermostat with overheating safety thermal cut-out.SPECIFICATIONSRatingVOLTAGE AMPS BTU/hour5000W III 240V 20.9A 17,0654000W II 240V 16.7A 14,105 3000W I 240V12.5A11,285GENERAL SAFETY INFORMATION : This heater requires hardwire installation (no plug). The installation of this product must be carried out by a certified electrician and in accordance with all local and national electrical codes.NOTE: Compatible with a 240V line voltage double pole wall thermostat. This heater must be installed by a certified electrician.: Read and understand all installation and operation instructions prior tooperating this unit. Observe all safety instructions. 1. Use only copper wires rated for at least 75ºC.2. Heater airflow must be directed parallel to or away from adjacent wall.3. Observe wall, floor and ceiling clearance requirements.4. All wiring must be done according to national and local electrical codes in Canada. The heater must be grounded as a precaution against possible electrical shock. Heater circuit must be protected with proper fuses.5. The mounting structure and the anchoring hardware must be capable of supporting the weight of the heater and the mounting bracket (if used).6. All electrical power must be disconnected and the main service box, which must be locked before connecting, inspecting, cleaning or servicing the heater. This is a precaution to prevent serious electric shock.7. This heater is not suitable for use in hazardous locations as defined by the national fire protection association (NFPA) in Canada. This heater has hot and arcing sparking parts inside. Do not use it in areas where gasoline paint or flammable liquids are used or stored.8. This heater is not suitable for use in corrosive atmospheres such as marine greenhouses or chemical storage areas.9. The heater must be mounted at least 8 feet above the floor.Improper installation or failure to follow the procedures outlined in thisinstruction manual can result in serious electrical shock.LOCATING THE HEATERInstall heater out of traffic areas, maintaining clearances stated in figure 1. The direction of airflow should not be restricted by columns or machinery and the airflow should wipeexposed walls rather than blowing directly on them. When more than one heater is used in an area, the heaters should be installed so that the air discharge of each heater supports the air flow of the others, to provide best circulation of warm air as indicated in figure 2.14in.1 224 in.73 8in.13 4MINIMUM DISTANCE FROMDISCHARGE TO ANY OBJECTNote: M in. clearance t o ceiling when not using mounting brackets3 4in.DISTANCE TO FLOOR At least 8 ft.is 158 in.FRONT VIEWMAXIMUM MOUNTING HEIGHT:Vertical air delivery unit = 11 ft.SIDE VIEWFigure 2Figure 1INSTALLATIONHardware neededYou will also need the following hardware, which can be purchased from your local hardware store or electrical supply store:●Electric wire in the adequate gauge and length for your application;●Proper size fuse or breaker for your heater’s amperage;●Proper wire connectors for your application;●Fasteners appropriate for your application that are strong enough to hold the unit. Mounting the bracketRefer to Figures 3a and 3b.1. Locate a wood stud in the wood ceiling joist. If you cannot locate a wood stud, you have to install a wood piece on the ceiling as this heater must be securely fastened.2. Remove the mounting bracket from the heating unit by loosening bracket screws with a wrench and slipping the handle off over the screw heads.3. Place a washer on screws before inserting through the holes in the mounting bracket and screw them securely into a ceiling joist.NOTE: If you want to swivel the heater either to the right or left adding a washer to both sides of the bracket is recommended. A longer lag bolt may be required to properly secure the unit. See Figure 3a.HANGING THE HEATER1) Lift the heater up and into the mounting bracket.2) Align the bracket screws with the keyhole slots in the mounting bracket.3) If the heater is to be tilted, it must be positioned in the keyhole slots. (see figure 4). 4) Tighten the bracket screws with a wrench so the unit is securely suspended athorizontal or vertical level.USE BOTTOMKEYHOLE SLOTS IF HEATER IS TO BE TILTED DOWNBRACKET SCREWSFigure 4REMOVE SCREW TO OPEN COVERADJUSTING AIRFLOW DIRECTION1. To turn the unit horizontally when it has been installed with a single lag bolt (as shown infigure 3a), simply turn the entire heater as needed. (as shown in figure 5 – rotate). The unit cannot be turned horizontally if it has been installed with 2 lag bolts.2. To tilt the unit vertically, loosen the bracket screws (see figure 4) and see figure 6 to viewmultiple vertical angles.3. Adjust louvers to the desired position.NOTE: The louvers are designed so they cannot be completely closed. Do not attempt to defeat this feature; damage to the unit can result.NOTE: To prevent possible overheating, please maintain adequate clearance as shown in figure. 1.Figure 5MULTIPLE VERTICAL ANGLESFigure 6CONNECTING THE POWERHEATER RATING&VOLTAGE HEATER AMPS FUSE SIZEMIN.WIRE SIZE 75°C COPPER5000W@240V20.930#10Circuit diagram Figure 7Warning: This appliance must be grounded!Warning: The appliance must be connected to a current protection circuit or 30 Amp device before being connected to power supply!1. Remove the screw from the front of the unit to connect the power to the heater.2. Attach the cable connectors to the unit (See Figure 8) and slide the 10-gauge wire through the cable connector.3. Connect the wire to the power block located in the base of the heater - See Figure 9.4. Turn on the power at the main service.NOTE: All wiring must be carried out by a certified electrician and must be in accordance to national and local electrical codes in C anada. For certain applications, conduit may be required (as shown in figure 8). Check local electrical codes. If you run the wiring in conduit and wish to be able to turn the heater make sure to purchase enough flexible conduits to allow the heater to be turned.Figure 8Figure 9If you will use an external temperature control (external thermostat) to control the heater to be operated or not, please follow below attention points:1. Make sure that the heater's temperature control knob (thermostat knob) is turned fully clockwise.2. Connect the wire according to below wiring diagram.Circuit diagram Figure 103. The external temperature control (external thermostat) must be in accordance with the requirement of UL or ETL standard.4. The current carrying capacity of external temperature control cannot be less than 26.5A.5. The lead wire of external temperature control (external thermostat) cannot be less than 10 AWG.OPERATING INSTRUCTIONSFigure 11WARNING: the heater must be properly installed before it is used.SETTING THE THERMOSTAT1) Rotate thermostat knob clockwise to high position, the amber POWER INDICATOR light will turn on.2) After room reaches desired comfort level, rotate thermostat knob counterclockwise until a click is heard, then rotate it slightly higher (toward Max).NOTE: Heater will cycle on and off to maintain room temperature.POWER SELECTION SWITCHUsing the POWER SELECTION SWITCH, select the heating output: I for 3000W, II for 4000W, III for 5000W.POWER SELECTION SWITCHTHERMAL CUT-OUTThe heater will automatically turn off should it overheat. When this happens, the red indicator will turn on. After the unit has cooled back down to a normal level, the heater will turn ON again and the red indicator will turn off, but the reason of the overheating must be determined and corrective action must be taken before further operation.THE HEATER MUST BE TURNED OFF IMMEDIATELY WHEN THE CAUTION INDICATOR IS GLOWING RED.NOTE: When the thermal cut-out is activated, the caution indicator will turn red.In this case, immediately turn the heater OFF and inspect for any objects on or adjacent to the heater that may cause high temperatures.MAINTENANCE INSTRUCTIONS1. Before cleaning, make sure the power has been turned off at the circuit breaker panel and the heating element of the heater is completely cool.2. To maintain the heater’s appearance, it needs only to be wiped over occasionally with a dry duster. During the summer months, or at other times when the appliance is not in use and is completely cold, wipe over with a damp cloth. Never allow water to drip into the heater.3. Do not use abrasive cleaning powders or furniture polish. Do not use chemical or abrasive products, metallic scourers and so on, which may deteriorate the surface, to clean the appliance.4. During the summer months, or at other times when the appliance will not be used for extended periods of time, disconnect the power supply and cover the whole appliance with a dust cloth. Store the heater in a dry and cool place.5. All other servicing should be performed by qualified service personnel. Do not try to repair the heater yourself.。
电暖器使用说明
电暖器使用说明：（油汀式，大的叶片式）
1、请您根据的需要调节热量。
2、为了您的健康，请勿将电暖器放置在床头附近的位置。
3、请勿将电暖器斜放或倒放。
4、请不要在电暖器上覆盖物品或烘干衣物。
5、避免水滴等液体淋在电暖器上。
6、请勿将电暖器连接在房间的“不间断电源”处。
7、请勿使用接线板连接电暖器，并严格按酒店指定的电源位置连接电暖器。
8、请勿长时间使用电暖器，离开房间时务必关闭电暖器的电源。
9、请勿在卫生间使用电暖器。
10、请勿将电暖器的电源插头插在高于电暖器的位置，否则易引发危险。
11、请看护好儿童，避免意外情况发生。
如果出现异常情况请及时联系服务中心，切勿自行拆卸电暖器。
.
电暖器使用说明：（远红外式，小的台式）
1、请您根据需要调节热量。
2、为了您的健康，请勿将电暖器放置在床头附近的位置。
3、请勿将电暖器斜放或倒放。
4、请不要在电暖器上覆盖物品或烘干衣物。
5、避免水滴等液体淋在电暖器上。
6、请勿将电暖器连接在房间的“不间断电源”处。
7、请勿使用接线板连接电暖器，并严格按酒店指定的电源位置连接电暖器。
8、请勿长时间使用电暖器，离开房间时务必关闭电暖器的电源
9、请勿在卫生间使用电暖器。
10、请勿用手触摸电暖器。
11、请勿将电暖器的电源插头插在高于电暖器的位置，否则易引发危险。
12、请看护好儿童，避免意外情况发生。
如果出现异常情况请及时联系服务中心，切勿自行拆卸电暖器。
全球指挥者PEG系列电暖器安装说明说明书
WARRANTY Please refer to the specification sheet at www.globalcommander.ca.
WIRING DIAGRAM
CAUTION
High-Limit
Heating Element
Thermostat
High-Limit
ting Element
1 800 463-7043 • www.globalcommander.ca
INSTALLATION INSTRUCTIONS Electric Baseboard Heater PEG Series
THE INSTALLATION MUST BE EXECUTED BY A QUALIFIED TECHNICIAN
CORNERS AND BLANK SECTIONS Install blank sections and corners the same way as heating unit of this series. Use ‘‘BX’’cable to run wiring into these options.
RISK OF ELECTROCUTION
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be taken to reduce the risk of fire, electric shock, and injury, including the following: Read all instructions before using this heater.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
comfort zone 电动风扇式电暖器说明书
Features:• 80° Oscillation• Three Settings:High - 1500 watts (5120 BTU) Low - 800 wattsFan Only• Fan Forced Air Circulation • Front Mounted Control Panel • Power-On Indicator Light • Safety Overheat Protection • Safety Tip-Over Switch• Convenient Carry Handle • 120V A.C., 60Hz, 12.5A CZ488 SeriesOscillating Ceramic Heater Save These InstructionsINTENDED USEThis product is intended for indoor residential and office use only, notfor industrial or other commercial applications. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. This heater must be plugged into a 120 Volt A.C., 15 AMP (or larger) circuit. Do not plug anything additional into the same circuit.If you have any questions whether your wiring is adequate, consult a qualified electrician. Risk of fire, overheating, malfunction, property damage, injury or even death may result if not adhered to.Use your heater only with a working smoke detector located in the vicinity of your heater.While using your heater, you should follow the IMPORTANT INSTRUCTIONS listed below. As part of those instructions, we have used the word "WARNING" to indicate the level of hazard: WARNING indicates a hazard which, if not avoided, could result in injury or death. IMPORTANT INSTRUCTIONSWhen using electrical appliances, basic safety precautions should always be followed to reduce the risk of electric shock, fire, or injury to persons, including the following precautions:• Read all the instructions before using this heater.• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use provided handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 meters) from the front of the heater and keep them away from the sides and rear.• Do not use heater unattended. Use of extreme caution is necessary when any heater is used by or near children, invalids, disabled persons or pets.• Do not operate the heater with a damaged power cord or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment or repair.• Do not use heater outdoors.• Use your heater only in dry environments. This heater is not intended for use in a bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water. Never locate heater where it may fall into a bathtub or other water container. Do not use in damp environments such as flooded basements.• Do not place the heater on a small, unlevel, uneven or any surface which might allow heater to tip or fall.• For proper operation, heater should be placed on a smooth,non- c ombustible surface. Do not place on rugs, carpet, vinyl flooring or other plastic surfaces. Not for use outdoors or in wet areas.• This heater is not designed as a primary heat source.• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip). Always unplug heater when not in use.• Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Arrange cord away from traffic area where it will not be tripped over.• To disconnect heater, turn controls off then remove plug from outlet. • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater.• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces like a bed, where openings may become blocked.• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored. • Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons or property. R EAD & SAVE THESE INSTRUCTIONS!WARNING: SHOCK HAZARDUse your heater only in dry environments. This heater is not intendedfor use in a bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water. Never locate heater where it may fall into a bathtub or other water container. Do not use heater outdoors. Do not use in damp environments such as flooded basements.WARNING: HOT SURFACESDo not touch body of heater when in use. This heater is hot when in use, to avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.WARNING: FIRE HAZARDHeater has hot and arcing or sparking parts inside. Do not use near combustible materials or flammable gases or sources of heat. Do not use in areas where gasoline, paint or flammable materials are used or stored. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 meters) from the frontof the heater and keep them away from the sides and rear. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage the heater.WARNING: ELECTRICAL SHOCK HAZARDDo not use with damaged cord or plug. Use with adequate electrical system that is up to code.The supply cord has a polarized plug. As a safety feature this plug will fit in a polarized outlet only one way. To prevent electric shock, match wide blade of plug to wide slot, fully insert plug. If the plug does not fit contact a qualified electrician.Do not operate any heater with a damaged cord or plug or after heater malfunctions, has been dropped or damaged in any manner. Do not operate heater with a broken heating element or ceramic cone or any visual imperfections. For repairs covered under warranty, see warranty statement. For all other repairs contact Comfort Zone® Customer Service by telephone or mail for information and assistance.PET OWNERS NOTE:The health of birds and some small pets are extremely sensitive to the fumes given off during the initial use of many appliances. Although these fumes are not harmful to humans, it is recommended that this heaternot be used around birds and small pets during its initial use until the manufacturing corrosion coatings burn off.USAGEHEATER OPERATION: Always operate the heater in the upright position following all instructions and recommendations listed in this manual.HEATER LOCATION: Place the heater in the area of the room that is coldest. The heater should not be placed immediately under a power outlet.HEATER CONNECTION: Plug heater directly into 120 Volt A.C., 60Hz wall outlet. Be sure plug fits tightly in outlet. A loose connection may cause overheating and damage to the plug or heater.NOTE: To prevent overloading a circuit, do not plug the heater into a circuit that is servicing other electrical needs. TURNING HEATER ONTo start the heater, turn the ON/OFF Power Level Control from the «OFF» position to the «FAN», «LOW or «HIGH» setting. During the heaters initial use, you may experience a slight odor or smoking. This is the result of the heating element lubrication "burning off". This is normal and will go away after a few minutes of use.POWER LEVEL SWITCH:This heater has two heat settings: «HIGH» and «LOW». Use the higher setting (1500 watt) to raise the room temperature quickly. When the desired temperature is reached, use the «LOW» setting. It is usually sufficient to maintain a comfortable temperature.TO OPERATE FAN ONLY:Turn the ON/OFF Power Level Control dial to the «FAN» setting. POWER INDICATOR LIGHT:The Power Indicator Light will illuminate when the heater or fan is turned on.OSCILLATION CONTROL:Control the Oscillation feature on the Heater/Fan by pressing the Oscillation Control «OSC» switch located on the control panel of the heater. IMPORTANT SAFETY FEATURES The power indicator light, located behind the safety grille, lights whenever the heater is plugged in to live power.The heater is equipped with an automatic overheat protection device located inside the body of the heater. If the heater grille is obstructed, or if the heater gets too hot for any reason, the automatic overheat protection device will turn the heater off. To reset the heater, simply turn power off and unplug the heater for 10 minutes until it cools down and you may plug the heater in and restart the heater. Be sure that the heater is on a smooth level surface with no obstructions.The heater is also equipped with a safety tip-over switch to turn power off to the heater when the heater tips over. To resume heater functions simply stand heater upright.Power Indicator LightOscillation ControlON/OFFPower Level Control TURNING HEATER OFFTurn the dial to «OFF» position before unplugging or plugging in the heater. Heater should be unplugged when not in use. CARE AND MAINTENANCE CLEANING:CAUTION – Before cleaning the heater be sure to disconnect power cord and allow the heater to cool completely.Clean the outside surface with a clean damp cloth. DO NOT IMMERSE THE HEATER IN WATER. Allow heater to dry completely before use.Do not use harsh chemical (gasoline, benzene, paint thinner, harsh cleaners, etc.) or abrasive cleaners as they will damage the heater. NEVER USE ALCOHOL OR SOLVENTS.REPAIR:DO NOT OPERATE THE HEATER WITHOUT THE GRILLE IN PLACE. DO NOT TAKE THE HEATER APART; THERE ARE NO SERVICEABLE PARTS INSIDE. DO NOT USE THE HEATER IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY. STORAGE:Keep original carton for storage of the heater. Coil and tie the power cord to avoid damage during storage.WASHABLE FILTER:The heater comes with awashable filter located atthe air inlet. When filterlooks dirty, simply unscrewrear grille cover and snap itout. Remove the filter fromthe heater and rinse it outwith warm water. BE SURETO ALLOW THE FILTERTO DRY COMPLETELYBEFORE CAREFULLYPLACING IT BACK ON THEHEATER. Re-install safetygrille cover with screws. Donot operate this heater withsafety grille removed.LIMITED WARRANTYThis unit is guaranteed to the original retail purchaser against defects in quality or workmanship for a period of oneyear from the date of original purchase. If this unit fails because of a manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer. After 30 days, but within the warranty period, if the unit was purchased within the continental United States, return it, freight prepaid, to World and Main for repair or replacement. If the unit was purchased outside the continental United States, return the unit to the place of purchase. This warranty does not cover damage caused by misuse, abuse, overheating or alteration. Repairs made by anyone other than World and Main are not covered in this warranty. World and Main will not be held liable for any losses due to neglectful operation. All implied warranties, including the warranties of merchantability and of fitness of purpose, if applicable, are hereby limited in duration to the period of one year from the date of original retail purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Incidental or consequential damages arising from a breach of either express or implied warranties are hereby disclaimed and excluded. Some states do not allow the exclusion of limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. Upon the expiration of this warranty all such liability will terminate. No other warranties are expressed or implied. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.No informal dispute settlement mechanisms are available. This limited warranty is given in lieu of all other warranties. Manufactured for:World and Main (Cranbury), LLC324A Half Acre Rd.Cranbury, NJ 08512 USA800-221-6895Rev. 02/15/22。
家用电暖器使用说明书
家用电暖器使用说明书尊敬的用户：感谢您选择我们的家用电暖器产品。
为了确保您的使用体验，我们为您准备了以下使用说明。
请仔细阅读并按照指示操作。
产品概述：家用电暖器是一种用于供暖的电器产品，功率高效、使用方便。
采用独特的加热技术，能够提供温暖舒适的室内环境。
安全警告：1. 在使用电暖器之前，请确保电源开关已经关闭，并拔下插头。
2. 请避免将电暖器长时间放置在潮湿或水平不平的环境中。
3. 请勿将电暖器放置在易燃物品附近，并保持至少50厘米的安全距离。
4. 为了避免发生意外，请勿将任何物体放置在电暖器上。
5. 请勿在电暖器未冷却之前进行任何操作或维修。
操作指南：1. 将电暖器放置在平稳的地面上，确保离墙壁至少50厘米的距离，以保证空气流通。
2. 将电暖器插头插入电源插座，并打开电源开关。
3. 通过控制面板或遥控器选择所需的温度和风速。
4. 使用定时功能可以预先设定开启或关闭时间，以满足个人需求。
5. 当不再需要使用时，请及时关闭电源开关，并将插头拔出电源插座。
维护与清洁：1. 在清洁或维护电暖器之前，请确保电源开关已关闭，并拔下插头。
2. 用湿布轻轻擦拭电暖器的表面，不要使用任何化学清洁剂。
3. 定期清洗过滤器以确保空气流通畅通。
可使用吸尘器或清水冲洗并晾干后再安装。
4. 请勿在清洁或维护过程中将电暖器置于水中或让水溅入机身。
故障排除：1. 如果电暖器无法正常启动，请检查电源开关和电源插座是否正常工作。
2. 如果电暖器无法加热或温度不稳定，请检查设定温度和风速是否正确。
3. 如果以上方法无效，请务必联系售后服务，切勿自行拆卸或修复。
免责声明：1. 请确认使用环境符合本产品相关安全要求，如因不当使用导致的人身或财产损失，本公司不承担任何责任。
2. 请勿将本产品用于其他非指定用途。
感谢您阅读并遵守以上使用说明。
如需进一步了解本产品，可以参考附带的产品手册。
祝您使用愉快！此为家用电暖器使用说明书，仅供参考。
智能暖风机控制器功能说明书-120307
专有名词及相关说明
一、专有名词及表示：
1.TH: 指室内环境温度
2.TP：指散热器检测温度
3.TS：指设定温度
二、面板显示说明:
1.室温：通电后室温指示灯恒亮，左边的双8指示灯显示室内温度；设定定时时室温
指示灯灭，左边的双8指示灯指示定时时间，表示小时。
2.设定：自动模式下运行时设定指示灯恒亮，右边的双8指示灯显示设定温度；调节
设定温度时设定指示灯闪动，右边的双8指示灯指示定时时间，表示分钟；自然风模式下不显示设定温度,设定指示灯及右边的双8指示灯灭；
3.运转：运行时或自动模式下的待机状态运转指示灯恒亮，关机运转指示灯灭;切换模
式（设定)后的闪动显示20秒再恢复正常显示。
4.定时：定时开/关机设定后点亮此灯;
5.睡眠：睡眠模式时点亮此灯；
6.时、分:定时开机时点亮，表示小时和分钟;调节定时关机时间时,闪动显示。
7.自动：取暖器在自动模式下运行或待机自动指示灯恒亮，在自然风模式和关机模式
下灭；
8.自然风:自然风模式下运行时自然风指示灯恒亮，其它状态下自然风指示灯灭；配合
下方的高、中、低指示灯指示当前设定运行凤速的档位；自然风模式调节时自然风指示灯闪动显示.
三、控制按键说明:
1.温度加：设定温度+调节,最高32℃，长按可以连加，自动模式下才有效;
十三、遥控器示意图
十三、连接图
简要元器件清单
器件代号器件名称器件参数。
电取暖控制器使用说明书
电取暖控制器使用说明书RJ-ESEM-1-JY一、产品示意图二、功能简介1、外置漏电保护：使用过程中，如加热管、循环泵或其它原因引起漏电，会立即切断电源保护使用者的人身安全。
保护动作电流不大于15mA ，保护动作时间不大于0.1S ，故障排除后，重新接通电源，并按下漏电保护复位按钮。
便恢复正常。
特别注意：使用前按下复位按钮后，应先按一下漏电保护器上的测验按钮，如果漏电保护器上的复位按钮此时没有跳起，说明漏电保护有故障，应严禁使用；如此时漏电保护器上的复位按钮跳起，说明漏电保护器正常。
再按下复位按钮方可使用。
2、水箱温度传感器检测：如果水箱温度传感器出现断路，会立即报警，显示故障代码“E2”,蜂鸣器鸣叫8声。
待故障排除后自行恢复。
3、超高温检测：当水箱温度超过80℃时，判定为超高温，此时会出现报警信号，显示故障代码“E5”，蜂鸣器鸣叫8声，并锁机。
4、模式选择：设有“自动模式/节能模式/上班模式”三种加热取暖工作方式供用户选择（选择方法见使用说明）。
另外还给用户提供了一个睡眠模式。
5、自动模式：打开开关，当水箱温度低于设置温度5度时，立即启动加热功能为水箱加热且循环泵同步连续工作（只要循环泵运行，循环图案便动态旋转，下同），此时“加热”指示灯点亮，“保温”指示灯熄）， 提示正在加热。
当温度上升到设置温度时自动停止电加热，“加热”指示灯熄灭，“保温”指示灯点亮，此时循环泵继续运行2分钟后，再以3分钟停止2分钟运行的方式持续工作。
当水箱温度再次低于设置温度5度时，立即启动加热且循环泵同步连续工作。
当水箱温度再次上升到设置温度时，停止加热，循环泵继续运行2分钟后，以3分停止2分运行的方式持续工作。
如此循环。
如在加热期间按动开关键会进入关机状态，也将会停止加热。
6、节能模式：在打开开关时，当加热条件成立，启动加热功能为水箱加热且循环泵同步连续工作（只要循环泵运行，循环图案便动态旋转，下同），加热期间循环泵连续工作，加热停止期间循环泵按2分钟运行3分钟停止的方式持续工作。
斯迪雅.2000W电暖器说明书
1.警告2.电气安装3.安装说明4.使用说明5.保养内容石板蓄热触屏智能电暖气片斯迪雅.2000W1. 警告图示意思是“避免过热，禁止覆盖”。
禁止坐在暖气片上。
• 电暖器不要被身体，感觉，精神能力下降的人（包括儿童），或者缺乏经验和知识的人单独使用，除非有一个人能负责他们的安全来监督和指导他们使用。
• 要监督好儿童，避免儿童玩耍本产品。
• 未经监督的情况下，不要由儿童来清洁保养暖气片。
• 电暖器不要插在低于10A一个的电插座上，电暖器不要直接放置在插座下方，在安装完成后的使用过程中需确保电源线不与暖气片及发热元器件接触，以避免危险。
• 不要把线放在地毯下，也不要被类似物覆盖。
把线远离拥堵的区域，这样不会被绊倒。
• 如果线或者插头有损坏，或者电暖器失灵，已被废弃，或其它任何方式的损坏，请不要操作电暖器。
如果电源线损坏，必须由制造商或其代理服务资质机构人员更换，以避免危险。
• 为避免过热引起火灾，请勿使用延长线。
• 加热器放在通风良好的地方使用。
为了防止可能的火灾，请不要在柔软的表面使用，仅在干燥的平面上使用。
• 请勿把加热器放在靠近易燃的材料，表面，物质等地方， 因为这可能有火灾的风险。
要远离这些至少前后左右1米。
• 请勿在有汽油、油漆等易燃物品（仓储）地方使用，如车库，或者太热的车间使用，电暖器内部配件发出火花时勿用。
• 请勿在淋浴房内，浴缸内及游泳池周围使用。
• 在使用时电暖器是热的。
为了避免烫伤和人身伤害，请不要让裸露的皮肤接触表面。
如果要挪动，在移动产品时拔掉插头待冷却后进行操作。
• 请确保没有其它的电器一起使用同个电路，同时也要经常性检查插头跟插座是否有松动，因为可能会超负荷引发火灾或人身财产安全。
• 电源线不要放在接近电暖器的热表面上。
• 在使用时不要接触产品的热表面。
• 电暖器不能倒过来或平躺着使用。
• 装有轮子的产品,严禁人坐在上面，或者当玩具玩耍。
• 使用时温度白天一般设置在20度，晚上一般设置在16度,不建议温度调到30度或以上使用，可以提高电暖器使用寿命及安全系数。
电暖器的使用方法与安全注意事项(2篇)
电暖器的使用方法与安全注意事项电取暖器是将有效的电能转换为热能的电热用具，市场上常见的有对流式和辐射式取暖器等。
（一）对流式取暖器。
又称暖风机，它是由电热丝、送风机及反射版等组成，暖风机上方为热空气出口处，下方为进气口，由送风机将空气循环加热使室内温度升高。
（二）石英取暖器。
又称石英红外线取暖器，由石英管和电热丝组成。
它是利用电热丝加热石英管辐射出远红外线，从而加热周围空气。
石英电取暖器具有升温快、散热均匀等优点；缺点是石英管比较娇贵，易破碎。
（三）电热油汀取暖器。
又叫充油式取暖器，由密封式元件、散热片、导热油和温控器等组成。
电热元件通电后加热导热油，由散热片表面将热量散发出去而加热周围空气。
在油温达到设定的温度时，温控器会自动切断电源。
其优点是安全、无明火、无烟、无味和卫生，缺点是温升缓慢，比较费电。
电取暖器的使用方法及其简单，在使用前详细阅读使用说明书，并按照说明书的要求进行及可，此处不再缀述。
（四）注意事项1、电源插座必须设有可靠的接地装置，切不可任意调换插头接地片，以免发生危险。
2、电源线不要挂搭在散热片的表面，以防烫坏电线绝源层而造成触电事故的发生。
3、禁止让小孩触摸散热片，以防烫伤。
4、移动取暖器时要小心！必须先切断电源。
5、接通电源前，应把电源线从线盒中全部拉出。
6、电取暖器在使用时必须垂直放置。
7、有增湿功能的油汀电取暖器，增湿瓶内的水在2h左右即会被用完，应及时加水，切勿干烧，否则容易烧坏增湿器。
电暖器的使用方法与安全注意事项（2）电暖器是一种常见的供暖设备，具有使用方便、加热快速等特点，受到广大用户的喜爱。
但是，使用电暖器时也需要注意一些安全事项，以确保使用过程中的安全性。
下面将介绍电暖器的使用方法，并提醒您注意安全事项。
一、电暖器的使用方法1.选择合适的电暖器在选择电暖器时，要根据所需供暖面积来确定功率。
一般来说，每平方米需要的功率为100瓦左右。
请注意，过大的功率可能会造成电源过载，过小的功率则无法满足供暖需求。
SANYO 美暖家庭暖气器文件说明书
ቤተ መጻሕፍቲ ባይዱ
~~~~B m'
888~ggg8~~~~B~~~~~~~~~~~~~~g~~~
B&orn~ ~g~. .
_ g~m~~o~rn~~~n~~~~on~A~~~~aoms~~~ m•~m~oa&~3~o~m0mcrnca~mtEJ~m~aoma~
Part 5 -Issuing Reports 1. Financial Read Report .... .. ....... .. .. .. .. ...... .... ... ................ .. . ........... .. .. ...... ... .. ... 22 2. General Control Read/Reset Report.... .. ................ .. .... ... .. ............. .... .. .. .. ... ... 23
Part 4- Using the Cash Register 1. Basic registration to a department.. ._...... .... ... ... ... ... .. .. ... .... .. .. ... .... .... .. ... 15
When a department is programmed fo r single-item-sale .. ... .. . ... .. ... 15 2. Mu ltiple registration of the same item .. ...... ............ ...... ....................... .. .... .... . 16 3. Finali za tion ... .... ..... .. ..... ........... ......... ............. .... ............ .. ... ........... .. ............... 16
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
百斯腾电暖器说明书
产品特点:
1.升温迅速:强制对流式散热，可迅速提高室温，令您倍感舒适。
2.高效节能:采用PTC陶瓷发热元件，具有高效，安全，节能等优点。
3.功率可调:设有二档加热功率，还没有风扇档。
4.安全保护功能:机构没有过热保护装置，可在因意外而散热不良时，自动切断电源。
5.摇头功能:具有自动摇头功能，改变送风方向，从而扩大送风范围。
6.风机采用优质仪用轴流风机，噪声小;外壳饿采用耐高温优质阻燃工程塑料及防护网罩，坚固耐用。
7.造型独特，款式新颖，结构紧凑，重量轻，使用方便。
使用说明:
1.接通电源:确认电源为交流220V/50HZ，且插座电源容量不低于10A，并确保插头与插座配合良好，然后插头插入电源插座。
2.开机:按下开机开关风机工作等于冷风开始，再按下加热I开关为低功率加热HT-38为(900W)，再按下加热II开关加热功率为(1800W)。
3.摇头功能:按下旋转开关，机身即可自动旋转扩大送风范围，如果调动前后角度，HT-38用手动前俯后仰即可。
4.HT-27开机旋转加热造反开关，I档为冷风，II档加热800W 低热指示灯亮，III档为1600W，高热指示灯亮，旋转摇头造反开关I档摇头。
5.关机:关机前先关掉加热开关等机内散热后再关风机，关机开关为高，关，低，开。
若外出或较长时间不使用，则请拔下电源插头。
注:为了防止过热，机内设有安全保护装置，若机器未能正堂运转，可能是该装置发生作用，请关机一段时间等冷却后，重新启动机器，如果仍无法启动，请与我公司维修部门联系。