最新Nature Made TripleFlex Triple Flex 中文说明书资料
索尼α7RⅢ产品介绍说明书
Key FeaturesWorld’s smallest lightest interchangeable lens full-frame camera 1Sony’s Exmor image sensor takes full advantage of the Full-frame format, but in a camera body less than half the size and weight of a full-frame DSLR.Full Frame 24.3 MP resolution with 14-bit RAW outputA whole new world of high-quality images are realized through the 24.3 MP effective 35 mm full-frame sensor, a normal sensor range of ISO 100 – 25600, and a sophisticated balance of high resolving power, gradation and low noise. The BIONZ ® X image processor enables up to 5 fps high-speed continuous shooting and 14-bit RAW image data recording.Fast Hybrid AF w/ phase-detection for DSLR-like focusing speedEnhanced Fast Hybrid auto focus combines speedy phase-detection AF with highly accurate contrast-detection AF , which has been accelerated through a new Spatial Object Detection algorithm, to achieve among the fastest autofocusing performance of any full-frame camera. First, phase-detection AF with 117 densely placed phase-detection AF points 3 swiftly and efficiently moves the lens to bring the subject nearly into focus. Then contrast-detection AF with wide AF coverage fine-tunes the focusing in the blink of an eye.Fast Intelligent AF for responsive, accurate, and greater operability with full frame sensorThe high-speed image processing engine and improved algorithms combine with optimized image sensor read-out speed to achieve ultra high-speed AF despite the use of a full-frame sensor.New Eye AF controlEven when capturing a subject partially turned away from the camera with a shallow depth of field, the face will be sharply focused thanks to extremely accurate eye detection that can prioritize a single pupil. A green frame appears over the prioritized eye when focus has been achieved for easy confirmation. Eye AF can be used when the function is assigned to a customizable button, allowing users to instantly activate it depending on the scene.Fully compatible with Sony’s E-mount lens system and new full-frame lensesTo take advantage of the lightweight on-the-go body, the α7 is fully compatible with Sony’s E-mount lens system and expanded line of E-mount compact and lightweight full-frame lenses from Carl Zeiss and Sony’s premier G-series.Direct access interface for fast, intuitive shooting controlQuick Navi Pro displays all major shooting options on the LCD screen so you can rapidly confirm settings and make adjustments as desired without searching through dedicated menus. When fleeting shooting opportunities arise, you’ll be able to respond swiftly with just the right settings.High contrast 2.4M dot OLED EVF for eye-level framingView every scene in rich detail with the XGA OLED Tru-Finder, which features OLED improvements and the same 3-lens optical system used in the flagship α99. The viewfinder faithfully displays what will appear in your recording, including the effects of your camera settings, so you can accurately monitor the results. You’ll enjoy rich tonal gradations and 3 times the contrast of the α99. High-end features like 100% frame coverage and a wide viewing angle are also provided.3.0" 921K dot LCD tilts for high and low angle framingThe tiltable 3.0” (921k dots) Xtra Fine™ LCD Display makes it easy to photograph over crowds or low to capture pets eye to eye by swinging up approx. 84° and down approx. 45°. Easily scroll through menus and preview life thanks to WhiteMagic™ technology that dramatically increases visibility in bright daylight. The large display delivers brilliant-quality still images and movies while enabling easy focusing operation.Simple connectivity to smartphones via Wi-Fi ® or NFCILCE-7/B α7 (Alpha 7) Interchangeable Lens Camera No other full frame, interchangeable-lens camera is this light or this portable. 24.3 MP of rich detail. A true-to-life 2.4 million dot OLED viewfinder. Wi-Fi ® sharing and an expandable shoe system. It’s all the full-frame performance you ever wanted in a compact size that will change your perspective entirely.Connectivity with smartphones for One-touch sharing/One-touch remote has been simplified with Wi-Fi®/NFC control. In addition to Wi-Fi support for connecting to smartphones, the α7 also supports NFC (near field communication) providing “one touch connection” convenience when transferring images to Android™ smartphones and tablets. Users need only touch devices to connect; no complex set-up is required. Moreover, when using Smart Remote Control — a feature that allows shutter release to be controlled by a smartphone — connection to the smartphone can be established by simply touching compatible devices.PC control w/ remote video capture controlRemote Camera Control allows you to control your α7 from your PC using a USB cable. Feature control has also been updated to include video capture control.14-bit RAW output for rich tonal gradation14-bit RAW image data of extremely high quality is outputted by the α7. This data fully preserves the rich detail generated by the image sensor during the 14-bit A/D conversion process. When developed with Sony’s Image Data Converter RAW development software, these images deliver the superb photographic expression and rich gradation that only 14-bit data can offer.New BIONZ® X image processing engineSony proudly introduces the new BIONZ® X image processing engine, which faithfully reproduces textures and details in real time, as seen by the naked eye, via extra high-speed processing capabilities. Together with front-end LSI (large scale integration) that accelerates processing in the earliest stages, it enables more natural details, more realistic images, richer tonal gradations and lower noise whether you shoot still images or movies.Full HD movie2 at 24p/60i/60p w/uncompressed HDMI® outputCapture Full 1920 x 1080 HD uncompressed clean-screen video files to external recording devices via an HDMI®connection in 60p and 60i frame-rates. Selectable in-camera A VCHD™ codec frames rates include super-smooth 60p, standard 60i or cinematic 24p. MP4 codec is also available for smaller files for easier upload to the web.Up to 5 fps shooting to capture the decisive momentWhen your subject is moving fast, you can capture the decisive moment with clarity and precision by shooting at speeds up to 5 frames per second. New faster, more accurate AF tracking, made possible by Fast Hybrid AF, uses powerful predictive algorithms and subject recognition technology to track every move with greater speed and precision.Multi-interface Shoe for flash and microphone flexibilityUnlike conventional cameras, the α7 features the advanced Multi-Interface Shoe that dramatically expands compatibility with Sony digital imaging accessories, thus raising the potential for photo/movie shooting.4K Still image output by HDMI® or WiFi® for viewing on 4K TVs8Enjoy Ultra High Definition slide shows directly from the camera to a compatible 4K television. The α7 converts images for optimized 4K image size playback (8MP). Enjoy expressive rich colors and amazing detail like never before. Images can be viewed via an optional HDMI® or WiFi®.TRILUMINOUS™ color outputs wider color gamut to compatible devicesTRILUMINOS™ Color technology, allows you to experience photos and movies in rich, natural colors on any TV equipped with a TRILUMINOS Display™. The expanded color gamut immerses you in those unforgettably colorful moments, from the complex shades in a shimmering blue sky to the delicate skin in a baby’s face.PlayMemories™ Camera Apps allows feature upgradesPersonalize your camera by adding new features of your choice with PlayMemories™ Camera Apps. Find apps to fit your shooting style from portraits, detailed close-ups, sports, time lapse, motion shot and much more. Use apps that shoot, share and save photos using Wi-Fi that make it easy to control and view your camera from smartphone, and post photos directly to Facebook or backup images to the cloud without connecting to a computer.11Image Data ConverterAdvanced features enable manipulation, conversion and management of full-resolution RAW images. You can expertly adjust exposure, white balance, tonal curves, saturation, contrast, hue and sharpness — as well as apply DRO and vignetting compensation. Bundled Remote Camera Control software also lets you remotely activate and deactivate still/ movie recording and control various camera settings from a PC.Vertical Grip CapableEnjoy long hours of comfortable operation in the vertical orientation with this sure vertical grip, which can hold two batteries for longer shooting and features dust and moisture protection.Mount AdaptorsMount any A-mount lens to the α7R with either the LA-EA3 or EA4 35mm full-frame compatible adaptors. The LA-EA4 additionally features a built-in AF motor, aperture-drive mechanism and Translucent Mirror Technology to enable continuous phase-detection AF. Both adaptors also feature a tripod hole that allows mounting of a tripod to support large A-mount lenses.Specifications1. Among interchangeable-lens cameras with an full frame sensor as of October 20132. Records in up to 29 minute segments.3. 99 points when an APS-C lens compatible with Fast Hybrid AF is mounted.7. Actual performance varies based on settings, environmental conditions, and usage. Battery capacity decreases over time and use.8. Requires compatible BRA VIA HDTV and cable sold separately.9. Auto Focus function available with Sony E-Mount lenses and Sony A-mount SSM and SAM series lenses when using LA-EA4 lens adaptor.。
Evoflex 腰部定位带安装说明书
en4mm (5/32”)MOUNTING OPTIONSBELT POSITION1. Based on clinical goals, determine the most effective position and angle for the belt. Determine whether putting pull strap on left or right side is best for user.2. With the adjustment strap tightened, locate the desiredmounting points on the seating system or wheelchair frame, then select from the mounting methods shown. 3. Add Evoflex Belt Extender if needed to reach mounting points.DIRECT MOUNTING TO SIDE GUARDSDrill 6mm (1/4”) hole or use existing hole/slot to attach belt using included fasteners.PACKAGE CONTENTS: Package may contain one or more of the following:Evoflex pelvic positioning belt with:• (2) M6 x 8 screws• (2) M6 Low-profile flange nuts • (2) Wave spring washers (2) Evoflex Belt Extenders with:• (2) M6 x 8mm screws• (2) M6 Low-profile flange nuts4mm (5/32”)SEAT MOUNTING BRACKET(Requires Art. No. HW200-20 or -90)4mm (5/32”)BAND CLAMP OR FRAME CLAMP (Requires Art. No. HW320 or HW310)Attach clamp to seat tube. Attach belt using the M6 screw included with the clamp.T -SLOT FASTENER KIT(Requires Art. No HKA6-12 or HKA10-14)Use wave spring washer and low-profile flange nut from Evoflex kit with bolt and washer from T -Slot Fastener Kit.✓✓Ø6mm (1/4”)CONTROLLING ROTATIONTo increase tension and control rotation, use included wave spring washer. Omit wave spring washer to decrease tension and allow easier rotation.enBELT ADJUSTMENTWhen the belt is properly adjusted and tightened, it should fit snugly, with all slack removed, so that the user is secure. Use the pull strap for daily adjustments, such as to accommodate changes in clothing . If additional length adjustment is necessary to achieve a good fit or to remove the product for cleaning, this can be done at the end straps.SAFETY CHECKWhen properly positioned in wheelchair, have user lean forward and side to side to check fit. Check for:1. Normal operation of buckle and adjustment straps.2. Comfort: Look for areas of irritation.3. Position: If too high or too low, adjust anchor points.4. I nterference with other devices: Relocate anchor points as necessary.5. M ove chair through full range of motion, including tilt, folding, and rolling. Check for any interference and relocate mounting points as necessary.EVOFLEX BELT EXTENDER INSTALLATION (OPTIONAL)Attach Belt Extender to Evoflex. Spring washer not used.To prohibit belt rotation. (Pin facing in)MOUNTINGAttach Belt Extender with Evoflex to wheelchair using one of the methods shown under Mounting Options. (Spring washer optional.)Cut to length as needed using a saw. Ensure cut location is as far away as possible from mounting hole being used.4mm (5/32”)ApplythreadlockerI N S T A LL A T I O N To allow belt rotation. (Pin facing out)。
ENGINEER III 合成鞋防滑鞋黑色76736说明书
ENGINEER III COMPOSITE TOE S2MEN’S/WOMEN’S BLACK 76736 • SIZE: EU 36-48, UK 3-13 • EN ISO 20345:20116121824303642485460Ceramic Tile Floor/Cleansing Agent Forward Flat slip/Outsole Test Minimum standardCeramic Tile Floor/Cleansing Agent Heel Test Steel Plate/Glycerine ForwardFlat slip/Outsole TestSteel Plate/Glycerine Heel TestWeight (per shoe): 718 gramsLeather upperCLOG-RESISTANT OUTSOLE • Added depth for improved durability and wear time.• Larger surface area covered by the outsole provides better slip-resistance.• Clog-resistant traction lugs have wide spacing which won’t let dirt and debris get stuck in the outsole.SuperiorSFC SLIP-RESISTANT outsole.Regular fitCE CERTIFIED S2 according to EN ISO 20345:2011standardsCOMPOSITE SAFETY TOE - 200 joulesDEFINED HEEL• Provides added safety when on stairs or ladders.PU gel insolePadded collarPolyester liningEnergy absorbing heel constructionENGINEER III- DATA GUIDECertification: EN ISO 20345:2011 (S2)Upper Material: Leather Lining Material: Polyester Midsole Material: EVAOutsole Material: RubberSafety Toe Cap: Composite COO:ChinaMidsole Material – EVAPadded tongueSlip Resistance Test EN ISO 13287:2012, performed by TUV Rheinland LGA Products GmbH in Leipzig, Germany during August 2018* On a scale where 0.0 is the absence of friction and 1.0 is very high friction (e.g. dry carpet), SFC rated .63 – more than tripling the .18 minimum standard. All SFC shoes use the Shoes For Crews patented slip-resistant outsole. Product tested: DOLCE81 76236Pull loopsShoes For Crews SFC GREATLY EXCEEDS INDUSTRY STANDARDSWATER PROOF Constructed to keepyour feet dryTripGuard – Allows ease of movement between different surfaces。
GE Vernova Flexipad 产品说明书
FLEXIPADEasier Maintenance, Higher Robustness & Reliability and Better Performance &Compactness thanks to a unique patented pads design and superior PEEK material properties.PEEK shell easily dismountable &replaceableHIGH PERFORMANCE THRUST & GUIDE BEARING PADSADVANCED BEARING TECHNOLOGY•GE Vernova’s Flexipad thrust & guide bearing pads have a sliding surface with a long lasting and high-performance thermoplastic coating.•They advantageously replace conventional babbitt pads, thanks to higher resistance to temperature and pressure, higher dimensional integrity and a lower friction co-efficient.•GE Vernova can upgrade existing babbitt pads to Flexipad by remachining the pads and installing a Flexipad PEEK shell instead of the babbitt coating.Pad repair in less than 1 hour on site Reduction of spare parts inventory: Only thin PEEK shells to be kept as spares5x less wear than PTFE coatings (*)Safe operation without injectionUp to 30% reduction in bearing losses(*) wear measured on our test rig by operating PEEK and PTFE pads in similar conditionsFLEXIPAD BENEFITSEasily & quickly repairable on site:in case of coating damage, one only has to dismount the pad from the bearing, dismount the Flexipad PEEK shell and install a spare one and remount the pad. The pad repair can be done on site in less than 1 hour. There is no need anymore to ship the pads to an external supplier for rebabbittingMore robust & reliable bearings: due to the low thermal conductivity of the Flexipad coating, the bearing pads have smaller thermal deformations compared to conventional materials, allowing a fast unit re-start after a stop. Low friction properties keep units with ageing hydraulic jacking systems operational, despite more starts and stops.More compact, more efficient bearings: with higher thermal and mechanical strengths, new bearings can be downsized and work with significantly higher loads.Reduced upgrade cost: Flexipad’shigh load carrying properties allow to keep existing thrust bearing arrangements and civil works, thus reducing upgrade costs if unit power and weight are increased.Improved peace of mind by solvinghot or problem bearings : Flexipad is more resistant to temperature and pressure, meaning it is less likely to seize up or trip a machine.HIGH PERFORMANCE THRUST & GUIDE BEARING PADSFEATURESFlexipad has a composite coating made from PEEK which improves pad characteristics. The coating is easily dismountable –see picture on the first page –with no need for any specific tooling.GE Vernova recommends the use of Flexipad pads for all Guide & Thrust bearings in vertical and horizontal arrangements. In particular Flexipad is particularly suited •To solve bearing issues such as overheating of the bearing: as it allows for higher specific pressure and reduced oil temperature increase•In refurbishment in case of increase of rotation speed or thrust load•For new bearings to reduce friction lossesFLEXIPADCONTACT US************************+ 1855 522 0755PEEK COATING SUPERIOR CHARACTERISTICS•High temperature resistance and maintenance of characteristics at higher temperatures •Tough material with lowdeformation, low wear and creep for a longer life-time•Very high load carrying capacity •Low friction co-efficient improves sliding propertiesMain CharacteristicsPEEK*Babbitt**PTFE***Melting point (°C)341240327Tensile strength room temp. (MPa)24022Tensile strength at 100°C. (MPa)15015Seizure, max. load (MPa)≥25 3.5w orking pressure 14Friction coefficient in oil0.0510.20.043Wear (based on comparative wear test)~2µm ~11µm Elongation2%300%Hardness (Rockwell)12620* PolyEtherEtherKetone ** or ‘White Metal’ *** PolyTetraFluoroEthylene, or Teflon®FEEDBACK FROM THE FIELD20 years experience with PEEK coated pads. Flexipad itself was first installed on a hydro unit in 2018. 14 thrust bearings & 3 guide bearings have been equipped worldwide with Flexipad pads for units from 4 MW to 188 MW, 75 rpm to 600 RPM. Examples:•Thrust bearing failure on Swiss unit in 2017. Due to low-speed rotation of the rotor for several hours after a guide vane failure. The mechanism got locked and was not able to close completely due to debris that entered between the blades. GE Vernova a solution based on PEEK material. •Test simulated bearing seizure due to lack of lubricating oil. In this scenario during operation with 4 MPa and 800 rpm the oil was removed from thebearing housing. The bearing continued to operate for 15 minutes. The surface was only slightly worn without any catastrophic damage visible.。
ISOFLEX TOPAS L 32和L 32 N低温筋膜类型商品说明书
Product informationISOFLEX TOPAS L 32, L 32 N,Prod. 004130, 004227,enEdition 14.08.2019 [replaces edition 28.01.2019]Benefits for your application–Exceed OEM requirements of -40 °C–Long service life due to high corrosion protection and resistance to oxidation and ageing–Many years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers worldwide)DescriptionISOFLEX TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of asynthetic hydrocarbon oil and a special lithium soap. ISOFLEX TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance.ISOFLEX TOPAS L 32 N also contains a UV indicator, which ensures quality checking even with minimum quantity lubrication.ApplicationISOFLEX TOPAS L 32 and L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.Both products have been approved by renowned car manufacturers, such as –Volkswagen VW TL 778 A –Daimler DBL 6827.40 and –Daimler DBL 6827.41.ISOFLEX TOPAS L 32 and L 32 N can also be used for:–guideways, bowden cables, door locks –rolling bearings in small motors, fans, pumps–tooth flanks in plastic/plastic gears (e.g. POM, PA and PBT)or plastic/steel material combinations.Application notesThe lubricant is applied by spatula, brush, grease gun or cartridge.Material safety data sheetsMaterial safety data sheets can be requested via our website . You may also obtain them through your contact person at Klüber Lubrication.ISOFLEX TOPAS L 32, L 32 N Special low-temperature greasesISOFLEX TOPAS L 32, L 32 N,Prod. 004130, 004227,enEdition 14.08.2019 [replaces edition 28.01.2019]Product information。
西部数据 GoFlex for Mac 移动硬盘说明书
Perfect for when you need to:• S tore files or backup using Time Machine® software • R ead, write and share files between Mac® and PC computers• Carry files with you on-the-go Capacities1TB, 1.5TBA Mac® ready solution with FireWire® 800, USB 2.0 and Time Machine® software compatibility that can be used interchangeably with a PC.The GoFlex for Mac® ultra-portable drive makes it easy to store, transport and back up all of your files. Bundled with the most popular interfaces and up to 1.5TB of storage, the drive is HFS+ formatted which makes it fully compatible with Time Machine® software. Use the included plug-and-play FireWire® 800 or USB 2.0 interface or upgrade to USB 3.0 or powered eSATA by pairing the drive with the appropriate GoFlex upgrade cables. Take advantage of the drive’s versatile design to upgrade to the fastest interfaces available. Pair the drivewith the additional GoFlex storage system products and access your content on your TV, over your networkor on-the-go. Install the downloadable HFS+ driver on the PC to use the drive interchangeably between the two without having to format. This is the perfect solution for primarily Mac® computer users who still regularly utilize a PC. The drive’s durable soft-touch metallic finish not only helps resist fingerprints, it also blends in perfectly with Apple® products.Highlights• FireWire® 800 or USB 2.0 plug-and-play drive• Compatible with Time Machine® software• Upgradable to USB 3.0 and powered eSATA• Use the same drive interchangeably on both Mac® and PC computers• Durable soft-touch silver finish to help resist fingerprints• 3-Year WarrantyProduct Dimensions 4.72in L x 3.46in W x 0.86in D (120mm x 88mm x 22mm)Weight: 0.796lb (0.362kg)Retail Packaging Specs Box dimensions: 6.1in L x 4.69in W x 1.73in D (170mm x 160mm x 45mm)Limited Edition: 5.63in L x 6.3in W x 2.17in D (143mm x 160mm x 53mm)Box weight: 1.045lb (0.475kg), Limited Edtion: 0.766lb (0.348kg)Master carton dimensions: 7.72in L x 7.68in W x 6.89in D (196mm x 195mm x 175mm)Limited Edition: 9.1in L x 6.02in W x 7.28in D (231mm x 153mm x 185mm)Master carton weight: 4.596lb (2.089kg), Limited Edition: 3.478lb (1.581kg)Master carton quantity: 4Master cartons per pallet: 180Pallet dimensions: 46.3in L x 37.99in W x 46.26in D (1,176mm x 965mm x 1,175mm)Limited Edition: 47.64in L x 39.84in W x 48.07in D (1, 210mm x 1,012mm x 1,221mm)Pallet weight: 865.7lb (393.5kg), Limited Edition: 664lb (302kg)Pallet layers: 6System Requirements • Mac® OS X operating system 10.5.8 or higher, or• Windows® 7, Windows Vista®, Windows® XP (32-bit and 64-bit) operating system*• FireWire® 800 or USB 2.0 port*HFS+ driver for PC operability available by downloadCompatibility may vary depending on user’s hardware configuration and operating systemInside the Box • GoFlex™ ultra-portable drive formatted for Mac®• GoFlex™ FireWire® 800 adapter with 18-inch (46 cm) cable• GoFlex™ USB 2.0 adapter with 18-inch (46 cm) cable• Quick start guide• 3-year limited warranty© 2010 Seagate Technology, the Wave logo, FreeAgent, and GoFlex are trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one thousand billion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used forformatting and other functions and will not be available for data storage. Complying with all applicable copyright laws is the responsibility of the user. Seagate reserves the right to change, without notice,product offerings or specifications. DS1722.1 1012 AMER。
Smooth-On EZ~Spray FlexFoam 可稀释可喷雾灵活乳胶说明书
PRODUCT OVERVIEWEZ~Spray® FlexFoam is a flexible polyurethane foam compound that can be conveniently sprayed using Smooth-On’s EZ~Spray® Junior System. EZ~Spray® FlexFoam consists of two liquid components in an EZ~Spray® cartridge. When combined in a mixing ratio of one to one by volume, EZ~Spray® FlexFoam quickly cures to a solid, lightweight and durable 7 lb. (approx.) flexible foam, that can be used for a variety of special effects and industrial applications. Refer to Smooth-On’s EZ~Spray® Junior manual and video before using.EZ~Spray® FlexFoam Sprayable Flexible FoamPROCESSING RECOMMENDATIONSPREPARATION...Safety - Store and use at room temperature (73°F/23°C). These products have a limited shelf life and should be used as soon as possible. Environmental humidity should be as low as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination Curing - EZ~Spray® FlexFoam will cure quickly and can be handled or demolded in about 15 minutes at roomtemperature depending on mass and configuration.PROCESSING RECOMMENDATIONS Mix Ratio: 1A:1B by volume Mixed Viscosity, cps: 1000 (ASTM D-2393)Specific Gravity, g/cc: 0.11 (ASTM D-1475)Volumetric Yield, cu. in. /lb.: 252Pot Life (Cream Time): 10 seconds (ASTM D-2471)Tack-Free Time: 2 minutes Handling Strength: 10 minutes Demold Time: 15 minutes Color: White Lbs./Cubic Foot: 7 lb/ft 3 Kgs./Cubic Meter: 110 kg/m 3 Approx. Volumetric Expansion: 7 times All values measured after 7 days at 73°F / 23°C TECHNICAL OVERVIEW022216-JR Call Us Anytime With Questions About Your ApplicationToll-free: (800) 381-1733 Fax: (610) 252-6200The new The Material Safety Data Sheet (MSDS) for this or any Smooth-On product should be read prior to use and is available upon request from Smooth-On. All Smooth-On products are safe to use if directions are read and followed carefully.Be careful.Part A contains methylene diphenyldiisocyante. Vapors, which can be significant when prepolymer is heated or sprayed, may cause lung damage and sensitization. Use only with adequate ventilation. Contact with skin and eyes may cause severe irritation. Flush eyes with water for 15 minutes and get immediate medical attention. Remove from skin with soap and water.Pa rt B is irritating to the eyes and skin. If contaminated, flush eyes with water for 15 minutes and seek immediate medical attention. Remove from skin with soap and water. When mixing with Part A follow precautions for handling isocyanates. If machining cured EZ~Spray® FlexFoam, wear dust mask or other apparatus to prevent inhalation of residual particles.Importa nt: The information contained in this bulletin is considered accurate. However, no warranty is expressed or implied regarding the accuracy of the data, the results to be obtained from the use thereof, or that any such use will not infringe upon a patent. User shall determine the suitability of the product for the intended application and assume all risk and liability whatsoever in connection therewith.Safety First!Performance & Storage - Cured castings of EZ~Spray® FlexFoamare flexible and durable. They resist moisture, and can be primed/painted or bonded to other surfaces (any release agent must be removed). If machining cured EZ~Spray® FlexFoam, wear dust mask or other apparatus to prevent inhalation of residual particles. Unpainted castings will yellow over time—more quickly when exposed to ultra-violet light. Flexible foam pieces for display should be supported with a rigid support structure.。
奥林巴斯 EZ Shot 3 Plus 25G EUS 针，增强可操作性，实现对任何病变的无妥协进入
Olympus Introduces EZ Shot 3 Plus 25 G EUS Needle with Enhanced Maneuverability for Uncompromised Access to Any Lesion, Consistent Performance to Potentially ReduceProcedural Costs and Procedure TimeEntire EZ Shot 3 Plus Line-Up Now Cleared for Fine Needle BiopsyOn September 14, 2018, Olympus, a global technology leader in designing and delivering innovative solutions for medical and surgical procedures, among other core businesses, announced today the FDA clearance of its EZ Shot 3 Plus 25 G needle as well as an expanded indication for the EZ Shot 3 Plus product line-up for both fine needle aspiration (FNA) and fine needle biopsy (FNB). The uncompromised access, enhanced puncturability, predictable trajectory and distinct echogenicity of the EZ Shot 3 Plus line, combined with the new 25 G offering and expanded indication for FNA and FNB, can drive improved staging of diseaseThe EZ Shot 3 Plus 19 G, 22 G and new 25 G have been designed to be used with an Olympus endoscopic ultrasound system (EUS) for ultrasonically guided FNA and FNB of submucosal and extramural lesions within the gastrointesitnal tract (i.e. pancreative masses, mediastinal masses, perirectal masses and lymph nodes). FNB is an important advantage for physicians because it has been reported that the larger tissue samples it provides may enable more precise diagnosis and rapid cytodiagnosis, a technique for on-the-spot pathological diagnosis of tissues collected during surgery.The EZ Shot 3 Plus 25 G, together with the EZ Shot 3 Plus 19 G and 22 G needles, completes the EZ Shot 3 Plus line of needles. EZ Shot 3 Plus benefits include:•Tissue architecture: Unique Menghini needle tip design features sharp, continuous cutting edges tocleanly cut tissue specimens while preserving cellular architecture.•Potential time and cost savings, increased efficiency:Uncompromised, accommodating access to lesions, through difficult scope positions is made possible by a combination of needle material and multi-layercoiled sheath. Smooth needle passage and responsiveness to handle motion are achieved by way of themulti-layer coiled sheath and needle flexibility.•More precision targeting of samples: Flexible needle design, smooth cutting edge, and distinctechogenicity (for distinct hyperechoic appearance on ultrasound) combine for precise access, clean cuts and visualization of the target lesion.“I have been very impressed with the maneuverability of the EZ Shot 3 Plus line,” said Dr. Allan P. Weston, MD, FACG, Digestive Health Center of the Four States. “While the needle competes with others in its ability to obtain excellent tissue samples for proper diagnosis, it exceeds predecessors, due to its flexible sheath, in its ability to pass readily through the echoendoscope channel and access the target lesions without requiring adjustments of the up/down knob, right/left knob or scope tip position, thereby ultimately reducing procedure duration times and enhancing efficiency.”“A needle is judged by the ability for the cytologist or pathologist to make a diagnosis based on the cells or tissues collected. We listened to our customers' challenges in access, sample volume, the ease of visualizing the needle on ultrasound and the needle’s ability to retain its shape after multiple passes,” said Kurt Heine, Group Vice President of the Endoscopy Division at Olympus America Inc. “We are proud to have addressed these combined challenges, producing a solution that fits squarely into the value-based paradigm of cost reduction with improved patient outcomes and satisfaction. The indication of not just FNA but now FNB is an important added tool in the fight against disease.”Photo Caption:Olympus announced the FDA clearance of its EZ Shot 3 Plus 25 G needle and expanded indication for the EZ Shot 3 Plus line-up for both fine needle aspiration (FNA) and fine needle biopsy (FNB). The uncompromised access, enhanced puncturability, predictable trajectory and distinct echogenicity of the EZ Shot 3 Plus line, combined with the new 25 G offering and expanded indication for FNA and FNB, can drive improved staging of disease and the potential to more easily connect patients to precision medicine options.Times Square Caption:Olympus 25 G needle & full EZ Shot 3 Plus line have FDA indication for FNB, FNA# # #About Olympus Medical Systems GroupOlympus is a global technology leader, crafting innovative optical and digital solutions in medical technologies; life sciences; industrial solutions; and cameras and audio products. Throughout our nearly 100-year history, Olympus has focused on being true to society and making people’s lives healthier, safer and more fulfilling. Our Medical Business works with health care professionals to combine our innovative capabilities in medical technology, therapeutic intervention, and precision manufacturing with their skills to deliver diagnostic, therapeutic and minimally invasive procedures to improve clinical outcomes, reduce overall costs and enhance quality of life for patients.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Nature Made 天然制造Nature Made TripleFlex Triple Flex 三倍维骨力关节宝GLUCOSAMINE 氨基葡萄糖；氨糖1500 毫克CHONDROITIN 软骨素；软骨胶800毫克MSM 二甲基砜750毫克【品牌】Nature Made®Triple Strength TripleFlex三倍维骨力美国顶级保健品制造商，产品100%纯天然，优良质量深得美国人青睐，更是各大医院医师和药店药剂师得推荐产品。
成立1971年，获得多项专利和荣誉，研究力量雄厚。
具备GMP（优良制造实践）认证生产，USP（美国药典）药品级质量。
【产品规格】Nature Made TripleFlex三倍强效氨基葡萄糖维骨力+软骨素复合配方+MSM1500mg150粒【产品特点】Nature Made TripleFlex联合三种有效成分增强关节润滑和弹性。
有效减轻关节疼痛、肿胀，增强关节活动功能，使您的关节更舒适更年轻。
盐酸氨基葡萄糖可帮助修复软骨、维持关节内结缔组织结构的正常。
其作用包括：促进关节液分泌、加速软骨组织再生和修复、强化韧带和肌腱、减轻滑?ぱ字ⅰ?本品是赠送老年人、骨关节炎患者、关节软骨伤患者、骨折患者的佳品！【适应症】适用于治疗和预防全身所有部位的骨关节炎，包括膝关节、肩关节、髋关节、手腕关节、颈及脊椎关节和踝关节等。
可缓解和消除骨关节炎的疼痛、肿胀等症状。
改善关节活动功能。
【产品成分】每2粒含：钠 70毫克Sodium盐酸氨基葡萄糖 1500毫克(Glucosamine Hydrochloride)硫酸软骨素+水杨苷(白柳树皮提取物)复合配方 800毫克(Chondroitin Sulfate,White Willow Bark Extract (Salicin) Salix alba)MSM 750毫克(Methylsulfonylmethane)【用法用量】每日2粒，随餐服用。
共75天用量。
【氨基葡萄糖介绍】氨基葡萄糖（Glucosamine）的作用：氨基葡萄糖（Glucosamine）是一种人体用来制造粘多糖的氨基酸组合分子结构。
氨基葡萄糖集中于关节软骨处，首先形成长链氨基酸粘多糖，然后形成更大的结构——蛋白聚糖。
蛋白聚糖的作用是吸收水分和液体到关节处用来在运动时润滑软骨。
氨基葡萄糖与关节健康有什么关系？骨关节炎是一种关节退行性疾病，是由于关节部位覆盖骨骼末端的软骨发生退化，造成骨骼与骨骼发生直接摩擦产生慢性炎症的一种病症。
软骨一旦损毁，骨头的尾端就暴露出来，引起关节僵硬和肿胀，从而导致关节部位发生螺旋性疼痛，并最终导致关节活动能力丧失。
全球大约有一千六百万关节炎患者，这其中又有近2/3的患者是女性。
长期以来，很多关节炎患者都使用非类固醇类的消炎药物（NSAIDS），如NUPRIN,MOTRIN,ADVIL和IBUPROFINS 等。
的确，这些药物对于缓解由于骨关节炎造成的剧烈疼痛非常有效。
很多患者以为疼痛消失了，病也就好了，其实不然。
非类固醇类消炎药仅仅是止疼药，但对于治疗骨关节炎却没有任何效果。
不仅如此，过多的使用非类固醇类消炎药还会加重骨关节炎的病情。
因为软骨需要蛋白聚糖来吸收水分，而这些药物恰恰抑制了蛋白聚糖的合成。
也就是说，我们服用的这些止疼药在减轻疼痛的同时，实际上也降低了蛋白聚糖的作用。
科学研究显示，骨关节炎患者关节部位的氨基葡萄糖含量通常都较正常人低。
而且，在步入老年或过度运动下，会呈现耗用过多的现象，以致影响到蹲跑动，上下楼梯的正常运作。
多项研究都证明，氨基葡萄糖增补剂不仅能缓解关节炎的疼痛，甚至能遏制病情的恶化，因为它能逐渐重建损坏的软骨，真正解决关节炎的病因。
同时，氨基葡萄糖极为安全，完全没有副作用。
众多研究结果表明，服用氨基葡萄糖后，和服用安慰剂的人群相比，关节的疼痛、紧张和肿胀等症状都得到了显著且全面的缓解，关节功能和身体状况都得到了改善。
服用氨基葡萄糖和服用非类固醇类消炎药的人群相比，尽管服用氨基葡萄糖起效较慢，但却能更好的减轻疼痛和改善关节机能。
经过充分的补充后，能使坐卧蹲跳等活动，维持正常。
【软骨素介绍】软骨素又称为“软骨胶硫酸盐”，它大量地集中于动物关节附近的软骨内，将体液引至关节内的细胞里，提供润滑作用，协助骨头随着各个动作来顺利滑动。
此外，软骨素可与氨基葡萄糖合作来制造软骨所需的胶原蛋白和其它成份。
多项研究表明，关节炎患者在服用软骨素之后，疼痛症状不仅大为减轻，活动能力也增加，而且，停用之后很久仍感到效果。
软骨素存在于我们平时食用的天然食物中。
研究证明，摄取软骨素对于人体正常利用氨基葡萄糖非常重要。
人体内含有多种消化酶，其中有些消化酶会“吃掉”软骨，导致软骨过早损坏，而软骨素就可以保护软骨免受这种侵害。
同时，“软骨素可以抑制那些阻止营养素被输送到软骨的消化酶的活动……刺激蛋白聚糖、糖胺聚糖和胶原蛋白的产生，而他们正是软骨的基体分子，也就是构成健康新软骨的物质。
”在补充葡萄胺的同时补充软骨素，是修复并维护关节和软骨健康的最佳组合。
最近医学研究显示：氨基葡萄糖和软骨素在许多方面抑制疼痛的效果超过处方止痛药。
【MSM介绍】是海洋中衍生的天然有机硫同化物。
有机硫最大用途之一是它能够缓解由关节炎引起疼痛。
MSM的良好效果在于它能够维持细胞液体流动。
使有害物质流失，而使营养素流入。
预防细胞内压力增强，从而减少疼痛。
【贮存方法】:常温、避光、防潮、置于儿童接触不到的地方。
百度百科搜索结果：针对不同的骨性关节炎，氨基葡萄糖1、适应疾病：膝关节退行性关节炎临床表现：膝关节疼痛、肿胀、活动时有吱吱声、上下楼梯吃力、下蹲困难。
氨基葡萄糖作用机理：氨基葡萄糖治疗膝关节炎主要通过修复关节软骨，催生关节滑液，使关节面之间不再发生硬性摩擦，不再出现疼痛、肿胀、骨摩擦音等症状，并通过对关节软骨的修复，使关节间隙恢复正常，关节功能得到彻底恢复。
服用指南：建议服用氨基葡萄糖片60～90天左右。
2、适应疾病:骨质增生临床表现：由于关节软骨磨损，骨与骨之间硬性摩擦，从而产生了身体代偿性的表现——骨质增生。
氨基葡萄糖作用机理：外源性摄入氨基葡萄糖，使关节内氨基葡萄糖含量恢复平衡状态，刺激软骨细胞合成蛋白多糖和胶原纤维，生成软骨基质，修复破损软骨，使关节软骨自身修复能力提高，通过氨基葡萄糖修复关节软骨、催生关节滑液，对骨质增生性关节炎（骨关节炎）起到根本性治疗作用。
服用指南：一般患者建议服用氨基葡萄糖片3～4个月左右。
3、适应疾病：半月板损伤临床表现：膝关节肿胀，活动时弹响、绞锁。
氨基葡萄糖作用机理：氨基葡萄糖能够修复损伤的半月板，同时修复半月板损伤继发的关节面软骨破损，从根本上修复关节损伤。
同时氨基葡萄糖能够清除有害因子，抑制并消除关节滑膜炎性反应。
服用指南：一般患者建议服用氨基葡萄糖片2～5个月左右。
4、适应疾病：髌骨、软化症临床表现：膝关节疼痛以及疲软无力，以上下楼最为明显。
氨基葡萄糖作用机理：外源性地补充氨基葡萄糖，可修复髌骨与股骨之间的关节软骨。
服用指南：一般患者建议服用氨基葡萄糖片3～4个月左右。
5、适应疾病：颈椎病神经根型临床表现：颈肩部疼痛、活动受限，手、上肢麻木疼痛，严重者肌肉无力、萎缩。
6、适应疾病：颈椎病脊髓型临床表现：走路有踩棉花感、双下肢无力，肌肉萎缩。
7、适应疾病：颈椎病椎动脉型临床表现：头晕、头痛、恶心、常与颈部活动有关，有时会出现眼花或耳鸣，严重者突然转头时易猝倒。
8、适应疾病：颈椎病交感神经型临床表现：心慌、心律不齐、肢体麻木、疼痛、多汗等交感神经紊乱症状。
氨基葡萄糖作用机理：氨基葡萄糖通过抑制椎间关节软组织的炎症反应，消除软组织水肿，并修复破损的软骨环，使椎间盘突出不易突发，并促进关节滑液正常分泌，使颈部活动更趋灵活。
服用指南：一般患者建议服用氨基葡萄糖片4～6个月左右。
9、适应疾病：滑膜炎临床表现：关节长期肿胀、疼痛，活动受限。
主要表现为滑膜肥厚，关节滑液过多。
氨基葡萄糖作用机理：氨基葡萄糖通过清除关节腔内有害物质，也可通过对关节软骨及病变滑膜的修复，减缓疼痛、肿胀等症状。
服用指南：一般患者建议服用氨基葡萄糖片3～6个月左右。
10、适应疾病：滑囊炎临床表现：滑囊肿胀、疼痛，主要表现为炎性滑液过多。
氨基葡萄糖作用机理：氨基葡萄糖促进炎性滑液吸收，也可对病变滑囊进行修复，减轻疼痛、肿胀等现象。
服用指南：一般患者建议服用氨基葡萄糖片3～6个月左右。
11、适应疾病：手骨、关节炎临床表现：手指关节疼痛，晨僵和肿胀。
严重者可造成关节变形。
氨基葡萄糖作用机理：补充氨基葡萄糖，可以修复磨损的关节软骨，减轻由于关节软骨磨损造成的关节疼痛。
服用指南：一般患者建议服用氨基葡萄糖片2～4个月左右。
12、适应疾病：足骨、关节炎临床表现：足骨局部疼痛，或者按压疼痛，严重时会从睡眠中疼醒，也可能发生关节畸形，如足拇指外翻，引起行走困难。
氨基葡萄糖作用机理：服用氨基葡萄糖后，氨基葡萄糖能够修复关节软骨磨损，如长期服用，对于经常剧烈运动的运动员的踝关节，有很好的保护作用。
服用指南：一般患者建议服用氨基葡萄糖片2～4个月左右。
13、适应疾病：肩周炎临床表现：肩关节周围隐痛或剧痛，肩关节运动明显受限。
氨基葡萄糖作用机理：氨基葡萄糖通过促进蛋白多糖和胶原纤维的合成，对肌腱、韧带、滑膜、滑囊等软组织进行修复，催生关节及滑囊滑液，解除关节软组织粘连，使肩关节活动功能得以恢复。
服用指南：一般患者建议服用氨基葡萄糖片1～2个月左右。
14、适应疾病：腱鞘炎、腱鞘囊肿临床表现：腱鞘炎发病时，手或脚腱鞘病变部位活动时疼痛，手指或足趾活动不灵活。
氨基葡萄糖作用机理：氨基葡萄糖通过对损伤腱鞘的修复，腱鞘炎症反应彻底消除，指（趾）关节活动自如，同时清除关节及腱鞘内有害物质，祛除刺激因素，并促进胶样粘液吸收，使腱鞘囊肿逐渐消失。
服用指南：一般患者建议服用氨基葡萄糖片2～3个月左右。
15、适应疾病：腰椎间盘突出症临床表现：腰部或腰骶部疼痛、坐骨神经分布区放射性麻木疼痛，严重患者下肢肌肉萎缩、甚至瘫痪。
氨基葡萄糖作用机理：补充氨基葡萄糖可明显改善椎间关节软骨及椎间盘纤维软骨环的退化，减轻病患者的疼痛。
服用指南：一般患者建议服用氨基葡萄糖片4～6个月左右。
16、适应疾病：风湿性、关节炎临床表现：是风湿热病理上的一个症状，患者的四肢大关节（腕、肩、踝、膝、髋）出现红、肿、热、痛，关节肿胀，及活动功能受限。
氨基葡萄糖作用机理：风湿性关节炎将导致关节软骨的破坏，补充氨基葡萄糖，可修复关节软骨的磨损，减轻患者的疼痛。
服用指南：一般患者建议服用氨基葡萄糖片3～4个月左右。
需要特别提醒的是：骨性关节炎病情严重或病史较长者，在服用氨基葡萄糖一段时间后，疼痛症状反而加重，疼痛可能要持续1~2星期，这是典型的恢复或治疗性反应，遇到此种情况要坚持服用，不要中断，避免前功尽弃。