基于单片机的外文翻译
Presented in this paper is a design of pulse measuring instrument based on MCU, as the circuit module plays an important role in the system, such as heart rate acquisition circuit, display circuit and STC89C52 microcontroller through the serial port to realize the connection. This design with STC89C52 microcontroller as the central control unit, through ST188 as infrared photoelectric sensor to collect the pulse signal, after the lm358 for op amp; again through before and after filtering, magnifying, shaping, and get stable signal; functions to achieve the rapid detection of heart. You can also through the button to set the pulse value scope; buzzer driver module In the range beyond the scope of the alarm prompt, the measurement results in the liquid crystal display.
Experimental results show that the test results of the design and practical requirements are basically the same, STC89C52 MCU strong anti-interference ability and LCD1602 display control the advantages of more convenient so that these features can be successfully completed. The production cost less than 100 yuan, with low price, easy manipulation, low power consumption, high reliability, very applicable to families and individuals.
Heart rate) in professional terms is used to describe the human heart beat cycle. Pulse of modern Chinese will be interpreted as "heart beating frequency value; so the heart rate can also said in a unit of time, heart rhythm speed.
Everyone's heart rate signals mostly contains rich physiological and psychological information. This is due to the health of internal organs of the body can reflect in the pulse information. This discovery has gradually attracted the attention of many clinicians. In our country, pulse diagnosis has been regarded as the essence of Chinese medicine; so far the clinical practice has about 2600 years. However due to the use of fingers often there will be some sweat glands refers to pulse diagnosis in the presence of errors can not be ignored; and leads to inaccurate measurement. Then perhaps you would say and the ear vein measurement, instead of the previous is often used. Although by measuring ear ripple come to pulse signal relatively comparison Clean, but because the ear pulse signal is weak, especially when the seasonal changes, the measurement signal is vulnerable to the influence of environmental temperature,
resulting in inaccurate measurement values.
With the development and progress of world science and technology and economy, cherish life, health care has become a common pursuit of mankind throughout the world. According to the Health Bureau statistics, every year because of cardiovascular and cerebrovascular diseases death of the highest number of human deaths first, not only the high cost of health care, back to the family, the government and the society caused great burden. In recent years, due to the accelerated pace of life, unreasonable eating habits and many junk food impact and other reasons, the incidence of cardiovascular and cerebrovascular is showing a trend of rising year by year. How to scientifically and harmless reduce cardiovascular disease morbidity and mortality, effectively reduce cardiovascular and cerebrovascular diseases and social Family burden, has become a very serious problem faced by human beings all over the world.
World first lever type pulse scanner is Vierordt was founded in 1854. It is a lever and a pressure drum scanner uses the notation to record the pulse waveform, also is the human for the first time through non invasion of recording the human body pulse, then caused a great sensation. However the starting point for the development of domestic relatively is relatively low, in the early 50s of the 20th century Zhu Yancai will pulse instrument reference to objective study on the pulse diagnosis in traditional Chinese medicine. In recent years, non invasive vascular function detection gradually attracted the eyes of the medical professionals. Since about 1980, no trauma vascular function detection by using the small range, its principle is roughly Based on hemodynamic rheology theory and elastic chamber theory. Characterized in it by the module temperature, blood pressure cuff module, blood oxygen module of multi physiological signal acquisition module combination by of brachial artery blocking opening in the process of finger end temperature signal, oxygen saturation and pulse wave signal changes of the parameters of the, again according to the clinical trial data acquisition and through the method of signal processing and statistical analysis, establishment of vascular function quantitative evaluation formula and blood vessel function evaluation. It has noninvasive, simple operation, accurate, good repeatability and convenient for clinical application and automatically generates diagnosis of
cardiovascular function, health status analysis and gives related medical solution Release.
Now pulse testing is no longer confined to the traditional manual testing or stethoscope test, only use electronic devices can be obtained more accurate data. In today's society, most of electronic measuring instruments has been directed towards the digitization, automation development direction. Pulse measuring instrument is not only good performance, simple structure, and has good value of application and popularization. In general, the pulse measurement instrument development is mainly the following trends: first, in the absence of human can automatically analyze the measurement of pulse value; the pulse of the traditional instrument need after experienced doctor pulse signal of the first initial analysis and then make a comprehensive analysis to final To confirm the results, this method of total said to not only waste a lot of manpower and by factitious error is relatively large. The second: the wide application of digital technology and other advanced technology; pulse measuring instrument integration to want to achieve a higher degree, and are more convenient to carry must rely on the rapid development of digital science and technology; at the same time digital signal processing application will enable interference becomes smaller measurement result is more accurate. The third: multi function of more and more obvious. The fourth: cheap, easy to carry and application and popularization value better, to the general public convenience.
Has always been in the hospital for basis for clinical diagnosis and treatment of most source extracted from the human pulse wave in physiological and pathological information. In China, feeling the pulse is old doctor of traditional Chinese medicine is the most commonly used to diagnose disease, has been in use ever since. The pulse signal emitted by human body contains the velocity of heart rate, full waveform, period and amplitude, a full range of integrated information, in a large extent can reflect human body each part information (for example blood viscosity, blood velocity). Although these biological signals exist in the human body, the signal intensity relative to said is relatively weak; if in a noisy environment effect is more obvious.
This graduation design principle is the use of single-chip microprocessor
STC89C52 as the center processor; pulse signal is collected by the sensor, through the microcontroller chip in the interior of the system timer to set the time; finally get the heart rate beat numerical by STC89C52 microcontroller to signal accumulation can be. Normal heartbeat is about 60-100 per minute times, circuit diagram of key module can through the button to set the scope of people's heart rate, above or below the setting range of possible heart there will be risks, buzzer driver module will drive buzzer alarm; the final measurement results Will be displayed on the LCD. The design can by viewing the IR indicates whether the lights and flashing, if sustained, stable flashing that test results are correct and error is small. With the assumption that the display results back and forth rock and numerical difference between the larger, there may exist error. Through the above steps, can roughly determine the body's own health, and is particularly suitable to be used to the individual or family, is also sometimes used in nursing homes and healthcare center.
The design of the selection of SCM is STC89C52。STC89C52 is STC company production of a low power, High Performance CMOS 8-bit microcontroller, with 8K bytes of in system can be classic MCS-51 core flash memory programming.STC89C52, but lots of improvements make the chip with traditional 51 microcontroller does not have the function. In a single chip, has a versatile 8-bit CPU with in system programmable flash. STC89C52 makes for many embedded control application system provides a highly flexible, super efficient solution. With the following standard features: 8K bytes of flash, 512 Bytes of ram, 32 I / O lines, watchdog timer, built-in 4KB EEPROM and max810 reset circuit, three 16 bit timers / counters, four external interrupt, a 7 vector 4 level interrupt structure (compatible with traditional 51 5 vector two-level interrupt structure), a full duplex serial port. Also STC89X52 can be reduced to 0 Hz static logic operation, support two software selectable power-saving mode. In idle mode stops the CPU and allowing the ram, timer / counter, serial port, and interrupt system to work. Power down protection, the RAM contents is Save, the oscillator is frozen, the microcontroller all work to stop until the next interrupt or hardware reset so far. The maximum operating frequency of 6T/12T, 35MHz optional.
STC89C52 has the following characteristics: STC89C52with MCS-51 series
single chip microcomputer in instruction system and the pin is fully compatible with; on-chip 4K byte online can repeat programming flash program memory; static job, scope of work: Hz ~ 24MHz; three level program memory encryption; 128 x 8-bit internal RAM; 32 bit bidirectional input and output lines; two 16 bit timer / counter five interrupt sources, two-level interrupt priority; a full duplex asynchronous serial port; intermittent and power down two work strong anti-interference: High anti-static ESD protection, easy 2KV/4KV fast pulse interference; wide voltage, power supply are not afraid of jitter; wide temperature range, - 40 DEG C to 85 DEG C; prohibit the ale output;; ultra low power consumption: power down mode: typical power consumption < 0.1 Mu A; idle mode: typical power consumption 2mA. In normal operation mode: typical power 4mA-7mA; off electric mode can be by external interrupt awaken, applicable for battery powered systems, such as a water meter, gas meter, portable equipment, etc.。
本文介绍的是一种基于单片机的脉搏测量仪设计，作为该系统中重要的电路模块，如心率采集电路、显示电路和STC89C52单片机之间通过串口实现连接。本次设计运用单片机STC89C52作为中心控制处理单元，通过ST188作为红外光电传感器来采集脉搏信号，经过LM358进行运放；再通过前后级滤波、放大、整形，从而得到稳定信号；实现了快速检测心率的功能。还可以通过按键来设置脉搏值的上下限范围；蜂鸣器驱动模块可以在超出所设置的范围时进行报警提示，测量结果在液晶上显示。
实验表明，该设计的测试结果与实际的要求基本一致，STC89C52单片机超强的抗干扰能力和LCD1602显示屏控制比较方便的优点使这些功能能够顺利地完成。该系统的制作成本在百元以内，具有价格低廉、便于操纵、功耗小、可靠性高等优点，十分适用于家庭和个人使用。
心率(Heart Rate)用专业术语来说就是用来描述人体心率跳动的周期。现代汉语中将脉搏值解释为"心脏跳动的频率"；故心率也可以说在一个单位时间内，心脏律动的快慢。
每个人的心率信号中大都蕴含着丰富的生理心理信息，这是由于人体内脏器官的健康可以反映在脉搏信息中；这一发现逐渐引起了众多临床医生的关注。在我国，脉诊一直被视为中华医术的精髓；到目前为止进行的临床实践大约已有2600多年。然而由于手指经常使用会存在一些汗腺，指脉诊断存在的误差不容忽视；进而导致测量不准确。这时或许你会说还有耳脉测量呢，不是以前也经常用过吗？虽说通过测量耳朵脉动来得到脉搏信号相对来说比较干净，但由于耳朵脉搏信号微弱，特别是当季节变化时，测量信号容易受到环境温度的影响，导致测量值不准确。
随着世界科技与经济的迅速发展和进步，珍爱生命、关注健康已经成为全世界人类的共同追求。据卫生局统计每年因心脑血管疾病猝死的人数位居人类死亡总数的第一位，不仅医疗费用居高不下，还给家庭、政府和社会造成巨大负担。近些年来，由于生活节奏加快、饮食习惯不合理和众多垃圾食品的影响等原因，心脑血管的发病率更是呈现逐年上升的趋势。如何科学且无害的降低心脑血管疾病的发病率及死亡率，有效的减轻心脑血管疾病带来的社会和家庭负担，已经成为全世界人类所面临的一个十分严峻问题。
世界上第一台杠杆式脉搏扫描仪是Vierordt于1854年创建的，它是采用杠杆和压力鼓式描记法来记录脉搏波形图的，也是人类第一次通过非侵入性的方式
记录人体脉搏的，当时引起了很大轰动。然而国内的发展起点相对来说比较低，20世纪50年代初朱颜才将脉搏仪引用到中医脉诊的客观化研究方面。近些年来无创伤血管功能检测渐渐吸引了医学人士的目光。大约在1980年以来，无创伤血管功能检测被小范围使用，它的原理大致是基于血流动力流变学和弹性腔理论。其特征在于：它由温度模块、血压袖带模块、血氧模块构成的多生理信号采集模块组合，通过对肱动脉进行阻断再开放过程中手指指端温度信号、血氧及脉搏波信号的各参数变化，再根据临床试验采集数据，并通过信号处理和统计分析方法，建立血管功能定量评价公式及血管功能评价。它具有无创、操作简单、结果准确、重复性好及临床应用方便，并自动生成心血管功能的诊断、健康状况的分析及给出相关的医学解释。
现在脉冲测试不再局限于传统的手工测试或听诊器测试，仅利用电子仪器就可以测量得出更准确的数据。当今社会，大部分电子测量仪器中已朝向数字化、自动化方向发展。脉冲测量仪不仅性能好，结构简单，而且具有很好的应用和推广价值。在一般情况下，脉冲测量仪器的发展主要是以下趋势，第一：在没有人为的情况下可以自动分析所测得的脉搏值；传统的脉搏仪器需要经过有经验的医生对其脉搏信号先进行初次分析，然后进行综合分析后最终能确认结果，这种方法总的说来不仅浪费大量的人力，而且由人为引入的误差也比较大。第二：数字化技术等先进技术的广泛应用；脉搏测量仪集成度要想做到更高程度，并且更加便于携带必须依靠数字科学技术的迅速发展；与此同时数字信号处理的运用将使干扰变得更小，测量结果更为准确。第三：多功能化会越来越明显。第四：价格便宜、方便携带，而且应用和推广价值较好，给广大民众带来便利。
历来在医院进行临床诊断及治疗的依据大都来源于人体脉搏波中提取的生理病理信息。在中国，脉诊是老中医最常用的诊断疾病的方式，一直沿用至今。人体发射出来的脉搏信号包含了心率的波速、波形、周期和波幅等全方面、全方位综合信息，在很大程度上能够体现出人体身体中的各部分信息（例如血液粘度、血液速度等）。尽管这些生物信号存在于人体自身当中，其信号强度相对来说比较微弱；若是在嘈杂的环境中效果更不明显。
本次毕业设计的原理是采用单片机微处理器STC89C52作为中心处理器；通过传感器采集脉搏信号，通过单片机芯片在内部的系统定时器来设定时间；最后得到的心率跳动数值通过STC89C52单片机对信号进行累加即可。一般正常人的心跳大约是每分钟60~100次左右，电路图上的按键模块就可以通过按键来设置
人们的心率范围；超出或低于所设置范围可能心脏方面会存在风险，蜂鸣器驱动模块就会驱动蜂鸣器报警；最终的测量结果会在液晶上显示。本设计能够通过查看红外指示灯是否来回闪动，若稳定持续闪烁，说明检测结果正确且误差较小；假设显示结果来回晃动且数值相差较大，有可能存在误差。通过上述步骤，能够粗略地判断人体自身的健康程度，特别适用于个人或家庭使用，有时还被应用在敬老院、保健医疗中心等。
本次设计中选用的单片机是STC89C52，STC89C52是STC公司生产的一种低功耗、高性能CMOS8位微控制器，具有8K 在系统可编程Flash存储器。STC89C52使用经典的MCS-51内核，但做了很多的改进使得芯片具有传统51单片机不具备的功能。在单芯片上，拥有灵巧的8 位CPU 和在系统可编程Flash，使得STC89C52为众多嵌入式控制应用系统提供高灵活、超有效的解决方案。具有以下标准功能：8k字节Flash，512字节RAM，32 位I/O 口线，看门狗定时器，内置4KB EEPROM，MAX810复位电路，3个16 位定时器/计数器，4个外部中断，一个7向量4级中断结构（兼容传统51的5向量2级中断结构），全双工串行口。另外STC89X52 可降至0Hz 静态逻辑操作，支持2种软件可选择节电模式。空闲模式下，CPU 停止工作，允许RAM、定时器/计数器、串口、中断继续工作。掉电保护方式下，RAM内容被保存，振荡器被冻结，单片机一切工作停止，直到下一个中断或硬件复位为止。最高运作频率35MHz，6T/12T 可选。
STC89C52RC具有以下几个特点：
STC89C52RC与MCS-51系列的单片机在指令系统和引脚上完全兼容；
片内有4k字节在线可重复编程快擦写程序存储器；
全静态工作,工作范围:0Hz～24MHz；
三级程序存储器加密；
128×8位内部RAM；
32位双向输入输出线；
两个十六位定时器/计数器
五个中断源,两级中断优先级；
一个全双工的异步串行口；
间歇和掉电两种工作方式
超强抗干扰: 高抗静电(ESD保护) ,轻松过2KV/4KV快速脉冲干扰；
宽电压,不怕电源抖动；
宽温度范围,-40℃~85℃；
禁止ALE输出;；
超低功耗:
掉电模式:典型功耗<0.1 μ A；
空闲模式:典型功耗2mA ；
正常工作模式:典型功耗4mA-7mA ；
掉电模式可由外部中断唤醒,适用于电池供电系统,如水表、气表、便携设备等.；
步进电机及单片机英文文献及翻译
外文文献： Knowledge of the stepper motor What is a stepper motor： Stepper motor is a kind of electrical pulses into angular displacement of the implementing agency. Popular little lesson: When the driver receives a step pulse signal, it will drive a stepper motor to set the direction of rotation at a fixed angle (and the step angle). You can control the number of pulses to control the angular displacement, so as to achieve accurate positioning purposes; the same time you can control the pulse frequency to control the motor rotation speed and acceleration, to achieve speed control purposes. What kinds of stepper motor sub-： In three stepper motors: permanent magnet (PM), reactive (VR) and hybrid (HB) permanent magnet stepper usually two-phase, torque, and smaller, step angle of 7.5 degrees or the general 15 degrees; reaction step is generally three-phase, can achieve high torque output, step angle of 1.5 degrees is generally, but the noise and vibration are large. 80 countries in Europe and America have been eliminated; hybrid stepper is a mix of permanent magnet and reactive advantages. It consists of two phases and the five-phase: two-phase step angle of 1.8 degrees while the general five-phase step angle of 0.72 degrees generally. The most widely used Stepper Motor. What is to keep the torque (HOLDING TORQUE) How much precision stepper motor? Whether the cumulative： The general accuracy of the stepper motor step angle of 3-5%, and not cumulative.
会计内部控制中英文对照外文翻译文献
会计内部控制中英文对照外文翻译文献(文档含英文原文和中文翻译)
内部控制透视：理论与概念 摘要：内部控制是会计程序或控制系统，旨在促进效率或保证一个执行政策或保护资产或避免欺诈和错误。内部是一个组织管理的重要组成部分。它包括计划、方法和程序使用，以满足任务，目标和目的，并在这样做，支持基于业绩的管理。内部控制是管理阶层的平等与控制可以帮助管理者实现资源的预期的有效管理的结果通过。内部控制应减少或违规错误的风险关联未被发现的，但设计和建立有效的内部控制不是一个简单的任务，不可能是一个实现通过快速修复短套。在此讨论了内部文件的概念的不同方面的内部控制和管制。 关键词：内部控制，管理控制，控制环境，控制活动，监督 1、介绍 环境需要新的业务控制变量不为任何潜在的股东和管理人士的响应因子为1，另外应执行/她组织了一个很大的控制权。控制是管理活动的东西或以上施加控制。思想的产生和近十年的发展需要有系统的商业资源和控制这种财富一个新的关注。主题之一热一回合管制的商业资源是分析每个控制成本效益。 作为内部控制和欺诈的第一道防线，维护资产以及预防和侦查错误。内部控制，我们可以说是一种控制整个系统的财务和其他方面的管理制定了为企业的顺利运行;它包括内部的脸颊，内部审计和其他形式的控制。 COSO的内部控制描述如下。内部控制是一个客观的方法用来帮助确保实现。在会计和组织理论，内部控制是指或目标目标的过程实施由组织的结构，工作和权力流动，人员和具体的管理信息系统，旨在帮助组织实现。这是一种手段，其中一个组织的资源被定向，监控和测量。它发挥着无形的（重要的作用，预防和侦查欺诈和保护组织的资源，包括生理（如，机械和财产）和乙二醇，声誉或知识产权，如商标）。在组织水平，内部控制目标与可靠性的目标或战略的财务报告，及时反馈业务上的成就，并遵守法律，法规。在具体的交易水平，内部控制是指第三方采取行动以实现一个具体目标（例如，如何确保本组织的款项，在申请服务提供有效的。）内部控制程序reduce程变异，导
单片机外文翻译
杭州电子科技大学信息工程学院毕业设计（论文）外文文献翻译 毕业设计（论文）题目用单片机实现的数字时钟电路设计文献综述题目单片机控制系统系电子工程 专业电子信息科学与技术 姓名郭筱楠 班级08091911 学号08919115 指导教师王维平
单片机控制系统 广义地说，微型计算机控制系统（单片机控制系统）是用于处理信息的，这种被用于处理的信息可以是电话交谈，也可以是仪器的读数或者是一个企业的帐户，但是各种情况下都涉及到相同的主要操作：信息的处理、信息的存储和信息的传递。在常规的电子设计中，这些操作都是以功能平台方式组合起来的，例如计数器，无论是电子计数器还是机械计数器，都要存储当前的数值，并且按要求将该数值增加1。一个系统例如采用计数器的电子钟之类的任一系统要使其存储和处理能力遍布整个系统，因为每个计数器都能存储和处理一些数字。 现如今，以微处理器为基础的系统从常规的处理方法中分离了出来，它将信息的处理，信息的存储和信息的传输三个功能分离形成不同的系统单元。这种主要将系统分成三个主要单元的分离方法是冯-诺依曼在20世纪40年代所设想出来的，并且是针对微计算机的设想。从此以后基本上所有制成的计算机都是用这种结构设计的，尽管他们包含着宽广的物理形式与物理结构，但从根本上来说他们均是具有相同基本设计的计算机。 在以微处理器为基础的系统中，处理是由以微处理器为基础的系统自身完成的。存储是利用存储器电路，而从系统中输入和输出的信息传输则是利用特定的输入/输出（I/O）电路。要在一个以微处理器为基础的时钟中找出执行具有计数功能的一个特殊的硬件组成部分是不可能的，因为时间存储在存储器中，而在固定的时间间隔下由微处理器控制增值。但是，规定系统运转过程的软件却规定了包含实现计数器计数功能的单元部分。由于系统几乎完全由软件所定义，所以对微处理器结构和其辅助电路这种看起来非常抽象的处理方法使其在应用时非常灵活。这种设计过程主要是软件工程，而且在生产软件时，就会遇到产生于常规工程中相似的构造和维护问题。 图1.1 微型计算机的三个组成部分 图1.1显示出了微型计算机中这三个单元在一个微处理器控制系统中是如何按照机器中的信息通信方式而联接起来的。该系统由微处理器控制，微处理器能够对其自身的存储器和输入/输出单元的信息传输进行管理。外部的连接部分与
外文翻译--如何监测内部控制
附录A
附录B 如何监测内部控制 内部控制是任何组织有效运行的关键,董事会、执行长和内部审计人员都为实现这个企业的目标而工作;该内部控制系统是使这些团体确保那些目标的达成的一种手段。控制帮助一个企业有效率地运转。此外,运用一种有效的风险系统,风险可被降低到最小。同时,控制促进经营和与经营有关的信息的可靠性。全美反舞弊性财务报告委员会发起组织(COSO；1992) 在它发布的具有开创性的文件《内部控制整合框架》中,将内部控制定义为：企业风险管理是一个过程，受企业董事会、管理层和其他员工的影响，包括内部控制及其在战略和整个公司的应用，旨在为实现经营的效率和效果、财务报告的可靠性以及法规的遵循提供合理保证。该委员会还指出,一个的内部控制的系统包括五个要素。它们是：控制环境、风险评估、信息和沟通、控制活动、监控。 COSO的定义及五个要素已被证明确实对不同的团体,如董事会和首席执行官起到作用。这些群体对内部控制系统的监管以及系统设计与运行有责任。而且,内部审计人员已经发现COSO的指导是有用的。这群人员可能会被董事会或管理层要求去测试控制。COSO最近发布的一份讨论文件，指出五个要素监控,其中的五个要素的确定在1992 frame work COSO原本。中国发展简报的题为《内部控制-整合框架：内部控制体系监督指南》(COSO，2007)。在文件中,COSO 强调监控的重要性，以及这些信息常常被没有充分利用。 因为董事会、执行长,和内部审计人员都在一个公司的内部控制中扮演着重要角色，内部控制的各要素,包括监测,都对所有的团体有着非常重要的意义。同时,外审计人员对监测有兴趣。《萨班斯-奥克斯利法案》（2002）为外部审计师创建了一个新的监督体制。所有的五个要素,包括监测,必须加以考虑。另外,内部控制审计必须结合对财务报告的检查。在一体化审计之前，在首席执行官的领导下，也许也在内部审计活动的支持下的管理，评估了内控制体系的有效性。随后外部审计人员对控制出具意见。起监督角色的董事会，将阅读内部审计、管理层和首席执行官出具的报告。文件关于监测对每一个团体的指导起了帮助,因为他们分别为各自的角色而劳动。 第一，什么是监测。监测的组成可评估内部控制系统在过去一段时间发挥效用的质量。其对控制功能的评估有助于企业确定其控制在有效地运作中。在执行监测活动时，相关人员参与审查系统的设计及其运行效果。这种检查必须进行及时,目的是为了提供给企业最大的利益。管理层负责做出适当的行动以回应这些结果。当事人对内部控制有兴趣,可以充分依赖这个内部控制系统,如果合适的监
单片机外文文献翻译
外文文献一单片机简介 单片机是一种集成在电路芯片，是采用超大规模集成电路技术把具有数据处理能力的中央处理器CPU随机存储器RAM、只读存储器ROM、多种I/O口和中断系统、定时器/计时器等功能（可能还包括显示驱动电路、脉宽调制电路、模拟多路转换器、A/D转换器等电路）集成到一块硅片上构成的一个小而完善的计算机系统。单片机也被称为微控制器（Microcontroller），是因为它最早被用在工业控制领域。单片机由芯片内仅有CPU的专用处理器发展而来。最早的设计理念是通过将大量外围设备和CPU集成在一个芯片中，使计算机系统更小，更容易集成进复杂的而对体积要求严格的控制设备当中。INTEL的Z80是最早按照这种思想设计出的处理器，从此以后，单片机和专用处理器的发展便分道扬镳。 二、单片机的发展趋势 现在可以说单片机是百花齐放，百家争鸣的时期，世界上各大芯片制造公司都推出了自己的单片机，从8位、16位到32位，数不胜数，应有尽有，有与主流C51系列兼容的，也有不兼容的，但它们各具特色，互成互补，为单片机的应用提供广阔的天地。 纵观单片机的发展过程，可以预示单片机的发展趋势，大致有： 1.低功耗CMOS MCS-51系列的8031推出时的功耗达630mW，而现在的单片机普遍都在100mW左右，随着对单片机功耗要求越来越低，现在的各个单片机制造商基本都采用了CMOS(互补金属氧化物半导体工艺)。象80C51就采用了HMOS(即高密度金属氧化物半导体工艺)和CHMOS(互补高密度金属氧化物半导体工艺)。CMOS虽然功耗较低，但由于其物理特征决定其工作速度不够高，而CHMOS则具备了高速和低功耗的特点，这些特征，更适合于在要求低功耗象电池供电的应用场合。所以这种工艺将是今后一段时期单片机发展的主要途径。 2.微型单片化 现在常规的单片机普遍都是将中央处理器(CPU)、随机存取数据存储(RAM)、只读程序存储器(ROM)、并行和串行通信接口，中断系统、定时电路、时钟电路集成在一块单一的芯片上，增强型的单片机集成了如A/D转换器、PMW(脉宽调制电路)、WDT(看门狗)、有些单片机将LCD(液晶)驱动电路都集成在单一的芯片上，这样 单片机包含的单元电路就更多，功能就越强大。甚至单片机厂商还可以根据用户的要求量身定做，制造出具有． 自己特色的单片机芯片。此外，现在的产品普遍要求体积小、重量轻，这就要求单片机除了功能强和功耗低外，还要求其体积要小。现在的许多单片机都具有多种封装形式，其中SMD(表面封装)越来越受欢迎，使得由单片机构成的系统正朝微型化方向发展。 3.主流与多品种共存 现在虽然单片机的品种繁多，各具特色，但仍以80C51为核心的单片机占主流，兼容其结构和指令系统的有PHILIPS公司的产品，ATMEL公司的产品和中国台湾
中小企业内部控制_外文参考文献
中小企业内部控制_外文参考文献 安徽工业大学毕业设计外文翻译 Private Enterprises of the intenal control issues Pulin Chang Economic Review. 2008, (5) Third, the promotion of private SMEs in the internal control system strategy (A) change management and business owners the concept of development. The majority of private small and medium enterprises in the family business, the success of these enterprises depends largely on internal control or entrepreneur leadership attention and level of implementation. Over the years, by traditional Chinese culture, business owners believe in Sincerity, fraternal loyalty permeate many aspects of enterprise management, strengthen internal controls that will affect the organization the members of distrust, resulting in internal control. Many private business owners that rely on business to do business benefits out of, rather than out of the internal financial management control; that the market is the most important internal control will be bound himself and staff development. Understanding of the bias, so that these leaders neglected the internal control system on the production and operation activities. Internal control can really become the leader of the internal needs of enterprise internal control system is the key to whether a mere formality. The internal control to make the internal needs of the enterprise depends largely on two points: First, determine
单片机外文翻译--STC89C52处理芯片
外文资料翻译 STC89C52 processi ng chip Prime features: With MCS - 51 SCM product compatibility, 8K bytes in the system programmable Flash memory, 1000 times CaXie cycle, the static operation: 0Hz ~ 33Hz, triple encryption program memory, 32 programmed I/O port, three 16 timer/counter, the eight uninterrupted dual-career UART serial passage, low power consumption, leisure and fall after fall electric power mode can be awakened and continuous watchdog timer and double-number poin ter, power ide ntifier. Efficacy: characteristics STC89C52 is one kind of low power consumption, high CMOS8 bit micro-co ntroller, 8K in system programmable Flash memory. Use high-de nsity nonv olatile storage tech no logy, and in dustrial 80C51 product in structi on and pin fully compatible. The Flash memory chips allows programs in the system, also suitable for programmable conventional programming. In a single chip, have clever 8 bits CPU and on li ne system programmable Flash, in crease STC89C52 for many embedded control system to provide high vigorous application and useful solutions. STC89C52 has following standard efficacy: 8k byte Flash RAM, 256 bytes, 32 I/O port, the watchdog timer, two, three pointer numerical 16 timer/counter, a 6 vector level 2 continuous structure, the serial port, working within crystals and horological circuit. In addition, 0Hz AT89S52 can drop to the static logic operation, support two software can choose power saving mode. Idle mode, the CPU to stop working, and allows the RAM, timer/c oun ters, serial, continu ous to work. Protectio n asa na patter n, RAM content is survival, vibrators frozen, SCM, until all the work under a continuous or hardware reset. 8-bit microcontrollers 8K bytes in the system programmable Flash AT89S52 devices. Mouth: P0 P0 mouth is a two-way ope n drain I/O. As export, each can drive eight TTL logic level. For P0 port to write "1", foot as the high impeda nee in put. When access to exter nal programs and nu merical memory, also known as
单片机的外文文献及中文翻译
SCM is an integrated circuit chip, is the use of large scale integrated circuit technology to a data processing capability of CPU CPU random access memory RAM, read-only memory ROM, a variety of I / O port and interrupt system, timers / timer functions (which may also include display driver circuitry, pulse width modulation circuit, analog multiplexer, A / D converter circuit) integrated into a silicon constitute a small and complete computer systems. SCM is also known as micro-controller (Microcontroller), because it is the first to be used in industrial control. Only a single chip by the CPU chip developed from a dedicated processor. The first design is by a large number of peripherals and CPU on a chip in the computer system, smaller, more easily integrated into a complex and demanding on the volume control device which. The Z80 INTEL is the first designed in accordance with this idea processor, then on the development of microcontroller and dedicated processors will be parting ways. Are 8-bit microcontroller early or 4 bits. One of the most successful is the INTEL 8031, for a simple, reliable and good performance was a lot of praise. Then developed in 8031 out of MCS51 MCU Systems. SCM systems based on this system until now is still widely used. With the increased requirements of industrial control field, began a 16-bit microcontroller, but not ideal because the cost has not been very widely used. After 90 years with the great development of consumer electronics, microcontroller technology has been a huge increase. With INTEL i960 series, especially the later series of widely used ARM, 32-bit microcontroller quickly replace high-end 16-bit MCU status and enter the mainstream market. The traditional 8-bit microcontroller performance have been the rapid increase capacity increase compared to 80 the number of times. Currently, high-end 32-bit microcontroller clocked over 300MHz, the performance catching the mid-90s dedicated processor, while the average model prices fall to one U.S. dollar, the most high-end [1] model only 10 dollars. Modern SCM systems are no longer only in the development and use of bare metal environment, a large number of proprietary embedded operating system is widely used in the full range of SCM. The handheld computers and cell phones as the core processing of high-end microcontroller can even use a dedicated Windows and Linux operating systems. SCM is more suitable than the specific processor used in embedded systems, so it was up to the application. In fact the number of SCM is the world's largest computer. Modern human life used in almost every piece of electronic and mechanical products will be integrated single chip. Phone, telephone, calculator, home appliances, electronic toys, handheld computers and computer accessories such as a mouse with a 1-2 in both the Department of SCM. Personal computer will have a large number of SCM in the work. General car with more than 40 microcontroller, a complex industrial control systems may even hundreds of single chip at the same time work! SCM is not only far exceeds the number of PC and other computing the sum, or even more than the number of human beings. Single chip, also known as single-chip microcontroller, it is not complete a certain logic chips, but to a computer system integrated into a chip. Equivalent to a
单片机外文文献翻译资料
沈阳工程学院毕业设计（论文） 外文文献 一单片机简介 单片机是一种集成在电路芯片，是采用超大规模集成电路技术把具有数据处理能力的中央处理器CPU随机存储器RAM、只读存储器ROM、多种I/O口和中断系统、定时器/计时器等功能（可能还包括显示驱动电路、脉宽调制电路、模拟多路转换器、A/D转换器等电路）集成到一块硅片上构成的一个小而完善的计算机系统。 单片机也被称为微控制器（Microcontroller），是因为它最早被用在工业控制领域。单片机由芯片内仅有CPU的专用处理器发展而来。最早的设计理念是通过将大量外围设备和CPU集成在一个芯片中，使计算机系统更小，更容易集成进复杂的而对体积要求严格的控制设备当中。INTEL的Z80是最早按照这种思想设计出的处理器，从此以后，单片机和专用处理器的发展便分道扬镳。 二、单片机的发展趋势 现在可以说单片机是百花齐放，百家争鸣的时期，世界上各大芯片制造公司都推出了自己的单片机，从8位、16位到32位，数不胜数，应有尽有，有与主流C51系列兼容的，也有不兼容的，但它们各具特色，互成互补，为单片机的应用提供广阔的天地。 纵观单片机的发展过程，可以预示单片机的发展趋势，大致有： 1.低功耗CMOS MCS-51系列的8031推出时的功耗达630mW，而现在的单片机普遍都在100mW左右，随着对单片机功耗要求越来越低，现在的各个单片机制造商基本都采用了CMOS(互补金属氧化物半导体工艺)。象80C51就采用了HMOS(即高密度金属氧化物半导体工艺)和CHMOS(互补高密度金属氧化物半导体工艺)。CMOS虽然功耗较低，但由于其物理特征决定其工作速度不够高，而CHMOS则具备了高速和低功耗的特点，这些特征，更适合于在要求低功耗象电池供电的应用场合。所以这种工艺将是今后一段时期单片机发展的主要途径。 2.微型单片化 现在常规的单片机普遍都是将中央处理器(CPU)、随机存取数据存储(RAM)、只读程序存储器(ROM)、并行和串行通信接口，中断系统、定时电路、时钟电路集成在一块单一的芯片上，增强型的单片机集成了如A/D转换器、PMW(脉宽调制电路)、WDT(看门狗)、有些单片机将LCD(液晶)驱动电路都集成在单一的芯片上，这样单片机包含的单元电路就更多，功能就越强大。甚至单片机厂商还可以根据用户的要求量身定做，制造出具有自己特色的单片机芯片。此外，现在的产品普遍要求体积小、重量轻，这就要求单片机除了功能强和功耗低外，还要求其体积要小。现在的许多单片机都具有多种封装形式，其中SMD(表面封装)越来越受欢迎，使得由单片机构成的系统正朝微型化方向发
外文翻译--中小型民营企业内部控制研究
中文5900字 本科毕业设计（论文） 外文参考文献译文及原文 学院 专业 年级班别 学号 学生姓名 指导教师 年月日
中小民营企业内部控制研究 Research on the Internal Control of Small and Medium-sized Private Enterprises 目录 摘要 (1) 1 选题背景 (2) 2内部控制理论的概述 (3) 2.1 内部控制的根本性质 (3) 2.2内部控制的责任 (3) 3 确保内部控制的充分性 (5) 4 先天的内部控制 (9) 5 结论 (11) Abstract (12) 1Background Topics (13) 2 Internal control theory outlined (15) 2.1 The Fundamental Nature Of Intaral Control (15) 2.2 Responsibillty For Internal Control (15) 3 Ensuring that the internal control adequacy (17) 4 Inherent limitations of internal control (22) 5 Conclusion (25)
摘要 内部控制这个概念已经不是一个新概念。这篇文章将研究每个公共部门财政经理和董事会成员应该了解的关于内部控制的内容。在分析了虚假的财政报告的根本原因以后，Treadway 委员会把大部分的责任归咎于内部控制管理的不足。作为回应，建立Treadway委员会的各个组织成立了一个赞助组织委员会（COSO），设法补救的Treadway委员会揭露出来的问题。 COSO为了确保此架构足够及全面的内部控制，确定了5个重要组成部分：1、控制环境；2、风险评估；3、政策及程序；4、沟通；5、监测与追踪。一个健全的架构与内部控制是必要的，同时必须意识到这类框架是难于达到一个完美的境界。内部控制在本质上是一种管理责任。
单片机_英文参考文献
Structure and function of the MCS-51 series The MCS-51 series one-chip computer MCS-51 is a name of a piece of one-chip computer series which Intel Company produces. This company introduced 8 top-grade one-chip computers of MCS-51 series in 1980 after introducing 8 one-chip computers of MCS-48 series in 1976. It belong to a lot of kinds this line of one-chip computer the chips have,such as 8051, 8031, 8751, 80C51BH, 80C31BH,etc., their basic composition, basic performance and instruction system are all the same. 8051 daily representatives- 51 serial one-chip computers . 51系列单片机是由英特尔公司生产的的单片机产品。该家公司在1976年发行了8位MCS-48系列。然后又在在1980年推出了高8位的MCS-51系列单片机。它属于这一类型很多行一个芯片的电脑芯片都如8051、8031、8751、 80c51bh,80c31bh等,其基本组成、性能和基本教学制度,都是一样的. 8051通常是51系列的代表。 An one-chip computer system is made up of several following parts: ( 1) One microprocessor of 8 (CPU). ( 2) At slice data memory RAM (128B/256B),it use not depositting not can reading /data that write, such as result not middle of operation, final result and data wanted to show, etc. ( 3) Procedure memory ROM/EPROM (4KB/8KB ), is used to preserve the procedure , some initial data and form in slice. But does not take ROM/EPROM within some one-chip computers, such as 8031 , 8032, 80C ,etc.. ( 4) Four 8 run side by side I/O interface P0 four P3, each mouth can use as introduction , may use as exporting too. ( 5) Two timer / counter, each timer / counter may set up and count in the way, used to count to the external incident, can set up into a timing way too, and can according to count or result of timing realize the control of the computer. ( 6) Five cut off cutting off the control system of the source . ( 7) One all duplexing serial I/O mouth of UART (universal asynchronous
外文翻译--企业内部控制的决定因素和后果
附件1：外文资料翻译译文 企业内部控制的决定因素和后果： 一个权变理论为基础的分析 1简介 人们普遍认为，内部控制制度能帮助企业降低风险、保证财务报表的可靠性和加强对法律法规的遵守。因此，一些企业的倒闭现象和一些欺诈行为的广泛宣传逐渐增加，针对企业特定的经营环境，从而使企业对内部控制制度更加重视。有效地管理对加强企业内部控制的有效性，并有效地传达给董事会和股东具有更大的压力。例如审计人员、供应商、顾客跟内部控制也有关系，因为它们可能影响长期财务报告的可信度、管理人员的责任和企业的组织形式。 尽管内部控制是影响公司的一个重要因素，证据表明，内部控制结构的实际表现在组织结构中是不存在的。正如金尼所提到的那样，该议题还未被研究人员所开发。关于内部控制的专业文献对于发展国际管制框架已经取得了一定的进展，但迄今为止，内部控制研究的数量是有限的。Selto和Windener出版的研究和分析的专业文章，发现在管理控制的研究中，关于内部控制专题的文学比实际文学少。人们越来越重视内部控制业务发挥的作用，缺乏现有的研究，所以建立新的研究需要和机会是当务之急。 这项研究有助于了解内部控制结构及其在公司环境中的成效。即使内部控制框架提出了内部控制的一个标准化的结构和目标，他们认为根据公司的特点来判断内部控制的不同需要。然而无论是框架还是先前的文学都不能提供一个适合于企业特点及其控制系统关系的图片。因此，本研究利用一个应急的方法来审查内部控制结构的设计及其在不同环境下观察到的成效。研究报告分析了结构方程关系模型和芬兰提出的741公司的实证结果。这项研究结果使内部控制几个重要方面的研究知识增加了局限性。首先，研究提出利用实证研究结果对内部控制及其在实践中的有效性进行研究。世界各地有一些组织把内部控制框架作为基金会开展活动。无论如何，还有一些关于实践框架以外的证据，从而对模式有一个更深
单片机外文翻译
单片机外文翻译 MICROCONTROLLER 1.MCU A microcontroller (or MCU) is a computer-on-a-chip. It is a type of microprocessor emphasizing self-sufficiency and cost-effectiveness, in contrast to a general-purpose microprocessor (the kind used in a PC). The majority of computer systems in use today are embedded in other machinery, such as telephones, clocks, appliances, vehicles, and infrastructure. An embedded system usually has minimal requirements for memory and program length and may require simple but unusual input/output systems. For example, most embedded systems lack keyboards, screens, disks, printers, or other recognizable I/O devices of a personal computer. They may control electric motors, relays or voltages, and read switches, variable resistors or other electronic devices. Often, the only I/O device readable by a human is a single light-emitting diode, and severe cost or power constraints can even eliminate that. In contrast to general-purpose CPUs, microcontrollers do not have an address bus or a data bus, because they integrate all the RAM and non-volatile memory on the same chip as the CPU. Because they need fewer pins, the chip can be placed in a much smaller, cheaper package. Integrating the memory and other peripherals on a single chip and testing them as a unit increases the cost of that chip, but often results in decreased net cost of the embedded system as a whole. (Even