NetApp存储安装、配置和维护手册
Netapp存储映射到AIX操作系统操作手册解读
Netapp存储映射到AIX操作系统操作手册Netapp存储属于中高端的存储系统，它的FAS6220系统属于常见的带有FC和NAS功能的综合性存储，今天记录并讲解如何在AIX系统安装并操作NetAPP的多路径软件和lun磁盘的识别，查看；步骤如下；1,解压软件包tar.zZcat ntap_aix_host_utilities_5.1.tar.Z |tar -xvf -2, 安装：installp +参数+路径+fileset先安装MPIO，然后安装santools_kit[tsm2:/tmp/ntap_aix_host_utilities_5.1/MPIO#]installp -aXYd /tmp/ntap_aix_host_utilities_5.1/MPIO NetApp.MPIO_Host_Utilities_Kit+-----------------------------------------------------------------------------+Pre-installation Verification...+-----------------------------------------------------------------------------+Verifying selections...doneVerifying requisites...doneResults...SUCCESSES---------Filesets listed in this section passed pre-installation verificationand will be installed.Selected Filesets-----------------NetApp.MPIO_Host_Utilities_Kit.config 5.1.0.0 # NetApp MPIO PCM Host Utilities Kit Path Config ToolNetApp.MPIO_Host_Utilities_Kit.fcp 5.1.0.0 # NetApp MPIO PCM Host Utiliti... NetApp.MPIO_Host_Utilities_Kit.iscsi 5.1.0.0 # NetApp MPIO PCM Host Utilities Kit iSCSI Disk ODM StanzasNetApp.MPIO_Host_Utilities_Kit.pcmodm 5.1.0.0 # NetApp MPIO PCM Host Utilities Kit PCM Friend ODM Stanzas<< End of Success Section >>+-----------------------------------------------------------------------------+BUILDDATE Verification ...+-----------------------------------------------------------------------------+Verifying build dates...doneFILESET STATISTICS------------------4 Selected to be installed, of which:4 Passed pre-installation verification----4 Total to be installed0503-409 installp: bosboot verification starting...installp: bosboot verification completed.+-----------------------------------------------------------------------------+Installing Software...+-----------------------------------------------------------------------------+installp: APPL YING software for:NetApp.MPIO_Host_Utilities_Kit.pcmodm 5.1.0.0NetApp.MPIO_Host_Utilities_Kit.iscsi 5.1.0.0NetApp.MPIO_Host_Utilities_Kit.fcp 5.1.0.0NetApp.MPIO_Host_Utilities_Kit.config 5.1.0.0. . . . . << Copyright notice for NetApp.MPIO_Host_Utilities_Kit >> . . . . . . . Copyright (c) 2003-2010 NetApp, Inc.. . . . . << End of copyright notice for NetApp.MPIO_Host_Utilities_Kit >>. . . .sysck: 3001-036 WARNING: File/opt/NetApp/MPIO_Host_Utilities_Kit/NOTICE.PDFis also owned by fileset NetApp.MPIO_Host_Utilities_Kit.iscsi. sysck: 3001-036 WARNING: File/opt/NetApp/MPIO_Host_Utilities_Kit/NOTICE.TXTis also owned by fileset NetApp.MPIO_Host_Utilities_Kit.iscsi. Finished processing all filesets. (Total time: 6 secs).0503-409 installp: bosboot verification starting...installp: bosboot verification completed.0503-408 installp: bosboot process starting...bosboot: Boot image is 42972 512 byte blocks.0503-292 This update will not fully take effect until after asystem reboot.* * * A T T E N T I O N * * *System boot image has been updated. You should reboot thesystem as soon as possible to properly integrate the changesand to avoid disruption of current functionality.installp: bosboot process completed.+-----------------------------------------------------------------------------+Summaries:+-----------------------------------------------------------------------------+Installation Summary--------------------Name Level Part Event Result-------------------------------------------------------------------------------NetApp.MPIO_Host_Utilities_ 5.1.0.0 USR APPL Y SUCCESS NetApp.MPIO_Host_Utilities_ 5.1.0.0 USR APPL Y SUCCESS NetApp.MPIO_Host_Utilities_ 5.1.0.0 USR APPL Y SUCCESS NetApp.MPIO_Host_Utilities_ 5.1.0.0 USR APPL Y SUCCESS [tsm2:/tmp/ntap_aix_host_utilities_5.1/MPIO#]lslpp -l |grep -i netappNetApp.MPIO_Host_Utilities_Kit.config5.1.0.0 COMMITTED NetApp MPIO PCM Host Utilities NetApp.MPIO_Host_Utilities_Kit.fcp5.1.0.0 COMMITTED NetApp MPIO PCM Host Utilities NetApp.MPIO_Host_Utilities_Kit.iscsi5.1.0.0 COMMITTED NetApp MPIO PCM Host Utilities NetApp.MPIO_Host_Utilities_Kit.pcmodm5.1.0.0 COMMITTED NetApp MPIO PCM Host Utilities [tsm2:/tmp/ntap_aix_host_utilities_5.1/MPIO#]cd ..[tsm2:/tmp/ntap_aix_host_utilities_5.1#]pwd/tmp/ntap_aix_host_utilities_5.1[tsm2:/tmp/ntap_aix_host_utilities_5.1#]lsMPIO SAN SAN_Tool_Kit[tsm2:/tmp/ntap_aix_host_utilities_5.1#]cd *it[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]pwd/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]installp -aXYd /tmp/ntap_aix_host_utilities_5.1/MPIO NetApp.MPIO_Host_Utilities_Kit[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]installp -aXYd /tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]lsNetApp.SAN_toolkit[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]installp -aXYd /tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit NetApp.SAN_toolkit+-----------------------------------------------------------------------------+Pre-installation Verification...+-----------------------------------------------------------------------------+Verifying selections...doneVerifying requisites...doneResults...SUCCESSES---------Filesets listed in this section passed pre-installation verificationand will be installed.Selected Filesets-----------------NetApp.SAN_toolkit.sanlun 5.1.0.0 # NetApp SAN Toolkit sanlun << End of Success Section >>+-----------------------------------------------------------------------------+BUILDDATE Verification ...+-----------------------------------------------------------------------------+Verifying build dates...doneFILESET STATISTICS------------------1 Selected to be installed, of which:1 Passed pre-installation verification----1 Total to be installed+-----------------------------------------------------------------------------+Installing Software...+-----------------------------------------------------------------------------+installp: APPL YING software for:NetApp.SAN_toolkit.sanlun 5.1.0.0. . . . . << Copyright notice for NetApp.SAN_toolkit >> . . . . . . .Copyright (c) 2003-2010 NetApp, Inc.. . . . . << End of copyright notice for NetApp.SAN_toolkit >>. . . .Finished processing all filesets. (Total time: 1 secs).+-----------------------------------------------------------------------------+Summaries:+-----------------------------------------------------------------------------+Installation Summary--------------------Name Level Part Event Result-------------------------------------------------------------------------------NetApp.SAN_toolkit.sanlun 5.1.0.0 USR APPL Y SUCCESS [tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#][tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#][tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#][tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#][tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#][tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]which sanlun/usr/bin/sanlun[tsm2:/tmp/ntap_aix_host_utilities_5.1/SAN_Tool_Kit#]cd /opt/NetApp[tsm2:/opt/NetApp#]lsMPIO_Host_Utilities_Kit santools[tsm2:/opt/NetApp#]cd santools[tsm2:/opt/NetApp/santools#]lsNOTICE.PDF NOTICE.TXT bin man[tsm2:/opt/NetApp/santools#]cd bin[tsm2:/opt/NetApp/santools/bin#]lssan_version sanlun[tsm2:/opt/NetApp/santools/bin#]sanlun lun showno controller LUNs available[tsm2:/opt/NetApp/santools/bin#][tsm2:/opt/NetApp/santools/bin#][tsm2:/opt/NetApp/santools/bin#]cfgmgr -v #存储那边配置好，映射好后，AIX开始扫描cfgmgr is running in phase 2[tsm2:/opt/NetApp/santools/bin#][tsm2:/opt/NetApp/santools/bin#][tsm2:/opt/NetApp/santools/bin#]lspvhdisk0 00c59412a7d7466a rootvg activehdisk1 00c3afa442c5c5f6 rootvg activehdisk2 none Nonehdisk3 none Nonehdisk4 none Nonehdisk5 none Nonehdisk6 none Nonehdisk7 none Nonehdisk8 none Nonehdisk9 none Nonehdisk10 none Nonehdisk11 none None[tsm2:/opt/NetApp/santools/bin#]用sanlun 命令查看其实还需要设置磁盘属性，要看netapp的官方文档设置deep ,queue_depth等；[tsm2:/opt/NetApp/santools/bin#]sanlun lun showcontroller: lun-pathname device filename adapter protocol lun size lun stateFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_06 hdisk10 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_07 hdisk11 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_00 hdisk4 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_01 hdisk5 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_02 hdisk6 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_03 hdisk7 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_04 hdisk8 fcs0 FCP 500.1g (536952700928) GOODFAS6220-2A: /vol/lun1_aix_tsm_vol/aix_tsm_05 hdisk9 fcs0 FCP 500.1g (536952700928) GOOD[tsm2:/opt/NetApp/santools/bin#]lsdev -Cc diskhdisk0 Available 01-08-00 SAS Disk Drivehdisk1 Available 01-08-00 SAS Disk Drivehdisk2 Available 01-08-00 SAS Disk Drivehdisk3 Available 01-08-00 SAS Disk Drivehdisk4 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk5 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk6 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk7 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk8 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk9 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk10 Available 05-00-02 MPIO NetApp FCP Default PCM Diskhdisk11 Available 05-00-02 MPIO NetApp FCP Default PCM Disk[tsm2:/opt/NetApp/santools/bin#]sanlun lun show -p # -p 参数查看多路径状态ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_05LUN: 5LUN Size: 500.1g (536952700928)Host Device: hdisk9LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_04 LUN: 4LUN Size: 500.1g (536952700928)Host Device: hdisk8LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_03 LUN: 3LUN Size: 500.1g (536952700928)Host Device: hdisk7LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_02 LUN: 2LUN Size: 500.1g (536952700928)Host Device: hdisk6LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_01 LUN: 1LUN Size: 500.1g (536952700928)Host Device: hdisk5LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_00 LUN: 0LUN Size: 500.1g (536952700928)Host Device: hdisk4LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_07 LUN: 7LUN Size: 500.1g (536952700928)Host Device: hdisk11LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1 Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1ONTAP_PATH: FAS6220-2A:/vol/lun1_aix_tsm_vol/aix_tsm_06 LUN: 6LUN Size: 500.1g (536952700928)Host Device: hdisk10LUN State: GOODController_CF_State: Cluster EnabledController Partner: FAS6220-2BMultipath Provider: AIX NativeMultipathing Algorithm: round_robin--------- ----------- ------ ------ ----------- ----------MPIO Controller AIX Controller AIX MPIO path path MPIO host target HBA path status type path HBA port priority--------- ----------- ------ ------ ----------- ----------Enabled primary path0 fcs0 0a 1Enabled secondary path1 fcs0 0a 1 Enabled primary path2 fcs0 1c 1 Enabled secondary path3 fcs0 1a 1 Enabled primary path4 fcs2 0b 1 Enabled secondary path5 fcs2 0b 1 Enabled primary path6 fcs2 1a 1 Enabled secondary path7 fcs2 1c 1[tsm2:/opt/NetApp/santools/bin#][tsm2:/opt/NetApp/santools/bin#]。
NetApp FAS系列安装配置说明
NETAPP FAS系列安装配置手册赞融电子上海分公司2003年11月修订控制1简介1.1说明本文简要说明了Network Appliance公司FAS系列存储产品配置过程。
本手册基于DataOntap 6.4.2P6操作系统1.2适用对象和前提本文是针对赞融电子的内部人员。
要求阅读者具有以下方面的专业能力:熟悉Unix操作系统；熟悉Windows操作系统；具有NETAPP FAS系统的基本知识.1.3参考资料Data ONTAP™ System Administrator’s GuideData ONTAP™ Software Setup Guide1.4术语表NFS：Network File System 网络文件系统CIFS：Common Internet File System 通用 Internet文件系统NAS：Network Attached Storage 网络附加存储WAFL：Write Anywhere File Layout 随地写入文件格式2配置过程2.1检查Filer硬件安装2.2设置Filer使用计算机串口连接Filer背板上的Console口使用Windows附件中的超级终端建立连接，参数如下：每秒位数 9600，数据位 8，奇偶校验无，停止位 1，数据流控制无建立连接依次打开Disk Shelf和Filer电源使用setup命令配置Filerfas940> setupPlease enter the new hostname []: fas940Do you want to configure virtual network interfaces? [n]: yNumber of virtual interfaces to configure? [0] 3Name of virtual interface #1 []: vif1Is vif1 a single [s] or multi [m] virtual interface? [m] sNumber of links for vif1? [0] 2Name of link #1 for vif1 []: e5aName of link #2 for vif1 []: e5bName of virtual interface #2 []: vif2Is vif2 a single [s] or multi [m] virtual interface? [m] sNumber of links for vif2? [0] 2Name of link #1 for vif2 []: e9aName of link #2 for vif2 []: e9bName of virtual interface #3 []: vif3Is vif3 a single [s] or multi [m] virtual interface? [m] sNumber of links for vif3? [0] 2Name of link #1 for vif3 []: e11aName of link #2 for vif3 []: e11bPlease enter the IP address for Network Interface vif1 []: 165.204.224.173 Please enter the netmask for Network Interface vif1 [255.255.0.0]: 255.255.254.0Please enter media type for vif1 {100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000)} [auto]: EnterPlease enter the IP address for Network Interface vif2 []: 165.204.224.174 Please enter the netmask for Network Interface vif2 [255.255.0.0]: 255.255.254.0Please enter media type for vif2 {100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000)} [auto]:Please enter the IP address for Network Interface vif3 []: 165.204.224.175Please enter the netmask for Network Interface vif3 [255.255.0.0]: 255.255.254.0Please enter media type for vif3 {100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000)} [auto]:Please enter the IP address for Network Interface e0 []: 165.204.224.172 Please enter the netmask for Network Interface e0 [255.255.0.0]: 255.255.254.0Please enter media type for e0 {100tx-fd, tp-fd, 100tx, tp, auto} [auto]: Would you like to continue setup through the web interface? [n]:Please enter the name or IP address of the default gateway: 165.204.224.254 T he administration host is given root access to the filer's/etc files for system administration. To allow /etc root accesst o all NFS clients enter RETURN below.Please enter the name or IP address of the administration host:Please enter timezone [GMT]: Asia/ShanghaiWhere is the filer located? []: Suzhou ChinaWhat language will be used for multi-protocol files (Type ? for list)?:zh.GBK Setting language on volume vol0The new language mappings will be available after rebootMon Sep 29 03:45:14 GMT [rc:ALERT]: Language on volume vol0 changed to zh.GBK Language set on volume vol0Do you want to run DNS resolver? [n]: yPlease enter DNS domain name []: You may enter up to 3 nameserversPlease enter the IP address for first nameserver []: 165.204.224.2Do you want another nameserver? [n]: yPlease enter the IP address for alternate nameserver []: 139.95.33.235Do you want another nameserver? [n]: EnterDo you want to run NIS client? [n]: EnterT his system will send event messages and weekly reportst o Network Appliance Technical Support. To disable this feature,e nter "options autosupport.support.enable off" within 24 hours.E nabling Autosupport can significantly speed problem determinationa nd resolution should a problem occur on your system.F or further information on Autosupport, please see:.h ttp:///autosupport/P ress the return key to continue.Now type 'reboot' for changes to take effect.fas940> Reboot重新启动Filer 之后，进行 cifs setup 安装fas940> cifs setupEnable CIFS access to the filer by a Windows(tm) PCY our filer is currently only visible to PCs on the same net.Do you wish to make the system visible via WINS? [no]: yPlease enter next WINS IP address (or return to end list) []: 165.204.224.225 Please enter next WINS IP address (or return to end list) []: 163.181.3.225 Please enter next WINS IP address (or return to end list) []:C IFS requires local /etc/passwd and /etc/group files for multiprotocol.D efault passwd file will be created containing 'root', 'pcuser',a nd 'nobody'.Enter the password for root []:Retype the password:T his filer is currently licensed for CIFS only.T he filer will be configured as a NTFS_only filer. It canb e changed to a Multiprotocol filer by reissuing the CIFS setup command.T he default name of this filer will be 'FAS940'.Do you want to modify this name? [no]: EnterC IFS supports three types of user authentication:1. Windows Domain authentication.2. Windows Workgroup authentication using the filer's user accounts.3. /etc/passwd and/or NIS based authentication.What type of authentication will this filer use? [1]: 1T he filer will use Windows Domain authentication.Enter the Windows Domain for the filer []:I t is highly recommended that you create the local administratora ccount (FAS940\administrator) for this filer. This account enablesa ccess to the filer from Windows when domain controllers are nota ccessible.Create the FAS940\administrator account? [yes]: yesSet the password for FAS940\administrator:Retype the password:Mon Sep 29 11:53:46 CST [rc:info]: User <administrator> addedMon Sep 29 11:53:46 CST [rc:notice]: security style for /vol/vol0/ changed from unix to ntfsA is a Windows 2000(tm) domain.I n order to create this filer's domain account, you must supply then ame and password of an administrator account with sufficient privileget o add the filer to the domain.Please enter the Windows 2000 user [Administrator@]: admin_mweizhi@Password for admin_mweizhi@:CIFS - Logged in as admin_mweizhi@.B y default, setup creates the filer account in the ActiveD irectory container named 'Computers'. Alternatively, you cani nstall the filer in an organizational unit (OU) by specifyingt he domain relative distinguished name of the OU, as in'ou=innerOU,ou=outerOU'.Active Directory container for filer account? [cn=computers]: EnterCIFS - Connecting to domain controller.Mon Sep 29 11:57:22 CST [rc:info]: Connection with DC \\SSUZDC2 established Mon Sep 29 11:57:22 CST [nbns_timer:info]: All CIFS name registrations complete for local serverWelcome to the AMD () Windows 2000(tm) domain.CIFS local server is running.2.3创建volume通过Telnet或串口，用命令行方式创建卷vol create <volume name, such as ‘/vol/vol1’> [ -r <RAID Size> ] [ disks]例，创建名为vol1的卷，RAID组最大为8，包含2块盘vol create /vol/vol1 –r 8 2使用vol status –r 命令观察初始化进程通过Web界面创建卷在浏览器中输入http://IP_Address/na_admin点击FilerView，根据提示输入用户名密码从右侧窗口Volume Add在New Volume Name栏中填写新建卷名vol1在Raid Group Size中填写RAID组的大小8在Language中选择Simplified Chinese(GBK)选择Automatic Disk Selection在Number of Disks中填写Volume的磁盘数2点击Add2.4通过CIFS共享通过命令行cifs shares -add <share name> <path>e.g. cifs shares add vol1 /vol/vol1通过Web界面设置Filerview CIFS Shares AddShare Name 填写 vol1Mount Point 填写 /vol/vol1点击Add2.5通过NFS共享通过命令行exportfs -o anon=0 /vol/vol1或者通过Web界面配置Filerview NFS Manage Exports Insert Line 在Path中输入/vol/vol1Permission选择rwAnonymous UID填写0点击OK3FilerView 使用介绍3.1Filer菜单3.1.1Show Status 显示Filer的整体状态，包括Filername, Model,System ID,Version, Disks, Status 等信息3.1.2Manage Licenses 管理Filer 的license 如常用的CIFS, NFS,FCP, iSCSI,SnapRestore, SnapMirror, SnapVault, SyncMirror, MultiStore 等，详情可参见/products/filer/或/products/filer/（中文网页）3.1.3Report 显示Filer目前配置及使用情况，如 Uptime, Network Interfaces, Disk Usage, System Configuration 等信息3.1.4Syslog Messages 这里是系统的syslog messages 信息，里面会记录系统运行时产生的一些信息，特别是一些系统的报错信息，这些信息非常重要，对于发现各种问题有很大帮助，Netapp Technical Support 也需要这些信息，最好每天都查看一下这里的信息3.1.5Use Command Line 在这里可以使用FilerView自带的telnet工具，方便你管理时使用Data Ontap系统的命令。
Netapp FAS2554安装配置手册
1
3
1
3
1
3
1
3
B Switched clustered
Microsoft Windows client
Runs the software to con gure your storage system
Download:
• System Setup Software: /NOW/public/system_setup/ • OnCommand System Manager: /NOW/cgi-bin/software/
Disconnect all supply power for complete isolation.
Disconnect all supply power for complete isolation.
Disconnect all supply power for complete isolation.
e0c-e0f —10 GbE Ethernet ports or 0c-0f — Fibre Channel ports (SFP dependent)
Remote/Node Management port (wrench icon)
Gigabit Ethernet ports (2)
Power supply LEDs
N
1
2
3
4
Disconnect all supply power for complete isolation.
2
3
4
2
N
4
2
N
TO DATA
TO MANAGEMENT
NETWORK SWITCH SUBNET
C Switchless clustered
NetAPP存储初始化配置详细操作笔记
NetApp ONTAP7.3.4存储初始化配置笔记Fas2020系统初始化2.1 软件系统介绍版本：Data ONTAP 7.3.4 Operating System文件系统: WAFL write anywhere file layout2.2 初始化磁盘使用提供的串口线缆连接设备Console口和笔记本串口，（如果没有事先准备RS232-USB转接头）准备好超级终端，波特率9600 ，无流控。
设备上电。
两分钟后，系统自检完成，出现：Starting boot on Mon Oct 14 07:54:14 GMT 2006(1) Normal boot.(2) Boot without /etc/rc.(3) Change password.(4) Initialize all disks.(5) Maintenance mode boot.（粗体字为本次设置）Selection (1-5)?4a选择4，初始化所有的磁盘；Zero disks and install a new file system? y选择y，确认将所有的磁盘零化，并且安装新的文件系统；This will erase all the data on the disks, are you sure? Y选择y，确认将删除磁盘上的所有数据；Zeroing disks takes about 750 minutes. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. ......................................................... ......................................................................................................... .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. ......................................................... ......................................................................................................... .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. ......................................................... ......................................................................................................... .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. .................................................................................................................................................................. ................................................................................漫长的等待后disk zeroing complete 完成。
NetappE-Series磁盘阵列管理手册V1
NetappE-Series磁盘阵列管理手册V1提供创新的存储和数据管理解决方案，旨在帮助客户加速业务突破，获得显著的成本效益。
了解/cn/。
NetApp, Inc.版权和商标信息NetApp Inc.公司保留所有权利。
本文件的任何部分，未经事先书面同意前，不得复制或传播。
如本文件中的产品规格描述有变化，恕不另行通知。
Netapp商标，Netapp Logo，Go further, faster和SANtricity均为Netapp公司的认证注册商标。
2 E-Series System Installation WorkbookTABLE OF CONTENTSType chapter title (level 1) (1)Type chapter title (level 2) (2)Type chapter title (level 3) (3)Type chapter title (level 1) (4)Type chapter title (level 2) (5)Type chapter title (level 3) (6)3 E-Series System Installation Workbook1 前言本文主要介绍如何Netapp E系列存储，如何利用SANTricity工具创建卷与卷组、如何配置卷的映射、如何保存和加载配置信息，最后简要介绍一下其它附加功能。
在配置磁盘阵列的时候，首先确定合适的数据保护策略，以及这些存储容量如何被组织分配使用。
这一章将介绍一些基本的卷和卷组的概念和配置方法，对一些更细节的描述，可以查看相应的帮助文件。
2 SAN TRICITY安装与卸载2.1 管理方式SANtricity Storage Manager主要用于监控、管理、维护和配置E系列盘阵。
该软件支持两种管理方式：Host-Agent带内管理方式；和Out-of-Band以太网带外管理方式。
NetApp存储AIX系统端配置方法和注意事项
NetApp 与AIX系统连接时MPIO的配置方法与注意事项目录1. AIX上MPIO介绍 (1)2. NetApp与AIX连接的MPIO要求 (1)3. dotpaths工具与ALUA的选择 (2)4. 如何安装NetApp AIX Host Utility 5.1 (3)5. 如何删除NetApp AIX Host Utility 5.1 (4)6. 对中行天津分行这次搬迁的MPIO完善建议 (4)1.AIX上MPIO介绍MPIO也叫做多路径IO模块，是指在主机端的操作系统与底层存储端连接时，AIX有多于1条路径（光纤或以太）从底层存储到达主机操作系统。
MPIO功能在操作系统上往往需要安装软件实现。
AIX自带MPIO模块，不需要安装MPIO 软件。
但是在配合NetApp设备使用时，需要安装NetApp Host Utility以便从AIX 端控制管理存储端的LUN和进行路径管理。
App与AIX连接的MPIO要求NetApp存储与AIX连接时，必须安装NetApp提供的免费工具包：Host Utility。
，目前NetApp正式支持的版本有：4.2，5.0，5.1。
我们推荐安装最新版本5.1。
本文的其余部分都是以5.1版本举例介绍如何使用Host Utility。
在多路径中，必须要进行路径管理。
路径管理的目的是为了让AIX识别路径，以便在存储端的控制器发生切换的时候，AIX端可以实现透明，对应用没有任何影响，否则有可能在存储控制器发生切换的时候，AIX端连接的LUN有可能产生瞬断的情况。
管理多路径，有两种方法，第一：在AIX端手工运行Host Utility工具包中提供的dotpaths工具设置路径权限。
第二：AIX和NetApp存储都满足最低版本要求以后，在存储端开启ALUA（Asymmetric Logic Unit Access，非对称逻辑单元访问）支持。
当开启了ALUA以后，AIX端可以自动设置路径优先级，并在存储端切换时自动进行路径切换。
NetApp存储安装调试简明教程
NetApp存储安装调试简明教程1.连线时注意，控制器先只连自己的磁盘，断开和partner的磁盘的sas线，为了assign磁盘时方便。
2.存储加电顺序，先shelf，1分钟后给控制器加电3.控制器加电后因为没有根卷，会提示错误，并不断重启，看到提示按ctrl-c，看到类似菜单：(1) Normal boot.(2) Boot without /etc/rc.(3) Change password.(4) Assign ownership and initialize disks for root volume.(4a) Same as option 4, but create a flexible root volume.(5) Maintenance mode boot.如果没有类似菜单，而是进入了loader>，用boot_ontap重启，看到提示在按ctrl-c4.assign磁盘，先用disk list命令查看是否识别所有磁盘。
5.disk assign all6，这时可以把其他sas线连上7.assign磁盘后用reboot命令重启，或halt后进入loader>然后boot_ontap重启，看到提示按ctrl-c，进入菜单，8版本的菜单有了细微变化，可能是选4或5进行磁盘零化，过程中要自动重启2次，零化过程要半天时间。
8零化结束后应该进入初始化配置，用问答的形式输入信息，主机名等，要事先问用户管理IP，配置在e0M上，之后配置也可以，但要重启，比较麻烦。
9.第一次初始化配置不能间断，如果配错，继续配置就行，配置结束后可以看到提示符>，输入setup可以重新开始，中间可以用ctrl-c中断，重来10.setup结束后提示reboot生效，reboot即可11启动后要升级，我比较习惯用http方式，上传文件稍慢，方法：software get http://192.168.2.100:8080/802_q_image.tgzsoftware install 802_q_image.tgzdownloadreboot12，重启后version检查是否成功13，添加license ，进入此链接/doc/7d5370471.html,/eservice/protocolAll Search.do?searchType=NA_WIQO_PERSON&button.findbynumber=Go%21&execQuery=Y&sessionInfo =false&moduleName=PROTOCOL输入sn，获得license，用命令license add XXXXX来添加，有些license有顺序，即添加了这个后才能添加那个，所以要用license 命令检查是否添加成功14，划分aggr，并检验划分前准备的参数：raid_size——每个raid的磁盘数量；raid类型——raid_dp还是raid4；64位还是32位；哪些磁盘加入哪个aggr 已xx州这个项目A控制器为例，默认的raid_size为23，最大为28，首先修改aggr0 的raid_size为24，命令：aggr options aggr0 raidsize 24向aggr0添加磁盘，默认已经有3块盘，所以再添加21块盘，命令：aggr add aggr0 21 创建aggr1,64位，raid_size为24 类型为raid_dp，共69块磁盘：aggr create aggr1 -B 64 -r 24 -t raid_dp 69创建或添加盘的时候可能会有提示，问是否创建新的raid，答y sysconfig -r和sysconfig -v检验配置是否正确15。
NETAPP存储系统管理员手册
NETAPP存储系统管理员手册一、登录系统对Filer的操作有两种基本方式，一种是通过telnet方式登录到Filer，用命令行方式对Filer进行管理。
在提示符下输入？或help可以列出系统相关命令，如下所示：C3NAS02> ?? halt nfsstat snapvault aggr help nis snmp arp hostname options software backup httpstat orouted sourcecf ifconfig partner stats cifs ifstat passwd storage config igroup ping sysconfig dafs ipsec priv sysstat date ipspace qtree timezonedf iscsi quota traceroute disk iswt rdate ups disk_fw_update license reallocate uptime dns lock reboot useradmin download logger restore version dump logout rlm vfiler echo lun rmc vif ems man route vlan environment maxfiles routed vol exportfs mt savecore vscan fcp nbtstat secureadmin wcc fcstat ndmpcopy setup ypcat file ndmpd shelfchk ypgroup filestats netdiag snap ypmatch fpolicy netstat snapmirror ypwhich ftp nfs第二种方式是通过IE浏览器对Filer进行管理。
在IE地址栏输入http://filerIP/na_admin，点击Filer view图标，输入用户名密码，弹出如下界面：图2、Filerview主管理界面图上图即是主管理界面，可以看到在左边栏目里列出可操作相关对象，点击会有展开下拉菜单。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
NETAPP存储系统安装、配置和维护手册
文档信息
本安装和维护手册为 XXX 定制，为NetApp标准文档之补充。
目录
1作业规划步骤 (1)
2配置步骤 (3)
2.1设置磁盘归属，创建ROOT卷 (3)
2.2检查并更新各部件的firmware系统版本 (15)
2.3检查并更新存储操作系统版本 (19)
2.4输入软件许可 (23)
2.5执行SETUP进行初始化设置 (23)
2.6调整ROOT卷的大小 (29)
2.7配置VLAN (29)
2.8修改HOSTS文件 (31)
2.9修改/etc/rc文件 (32)
2.10配置AutoSupport服务 (33)
2.11配置SSH (34)
2.12配置SNMP (35)
2.13配置NTP (36)
2.14配置MTA (37)
2.15配置IPspace (37)
2.16配置MultiStore (37)
2.17配置CIFS (41)
2.18配置ISCSI (44)
2.19配置FCP (45)
2.20配置NFS (46)
2.21配置重复数据删除 (47)
2.22配置Snaprestore (48)
2.23容灾实现Snapmirror (52)
3日常维护 (55)
3.1正常开关机 (55)
3.2维护手段 (55)
3.2.1Filerview 图形管理接口 (55)
3.2.2命令行(CLI) (57)
3.3空间管理：Aggr, Volume和lun的介绍 (57)
3.4常用命令基本应用 (58)
3.5日常系统检查 (58)
3.5.1目测 (58)
3.5.2例行系统检查 (58)
3.6autosupport功能简介和配置 (59)
4故障处理流程 (61)
Page II
4.1支持方式 (61)
4.1.1NetApp on the web (NOW) site和服务 (61)
4.1.2GSC( Global Support Center 全球支持中心) (61)
4.2案例开立流程 (62)
4.3损坏部件更换流程 (62)
Page III
1 作业规划步骤
Page 2
2 配置步骤
配置参数表
2.1 设置磁盘归属，创建ROOT卷
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
2.2 检查并更新各部件的firmware系统版本
Page 15
Page 16
Page 17
Page 18
2.3 检查并更新存储操作系统版本
Page 19
Page 20
Page 21
Page 22
2.4 输入软件许可
使用license add XXXXXXX命令添加许可，全部输入后，使用license命令进行检查。
鉴于许可的保密性，此处不截屏日志。
2.5 执行SETUP进行初始化设置
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
2.6 调整ROOT卷的大小
2.7 配置VLAN
Page 29
Page 30
2.8 修改HOSTS文件
Page 31
2.9 修改/etc/rc文件
Page 32
2.10 配置AutoSupport服务
Page 33
2.11 配置SSH
Page 34
2.12 配置SNMP
Page 35
2.13 配置NTP
Page 36
2.14 配置MTA
2.15 配置IPspace
2.16 配置MultiStore
Page 37
Page 38
Page 39
Page 40
2.17 配置CIFS
Page 41
Page 42
Page 43
2.18 配置ISCSI
Page 44
2.19 配置FCP
Page 45
2.20 配置NFS
Page 46
2.21 配置重复数据删除
Page 47。