国际经贸英语合同写作
英语版国际贸易合同5篇
英语版国际贸易合同5篇篇1International Trade ContractThis contract is made on [Date] between [Company Name 1, Country 1] and [Company Name 2, Country 2], hereinafter referred to as the “Seller” and the “Buyer” respectively.1. Contract Commodity and SpecificationThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [Describe the product in detail, including name, quantity, specifications, and other necessary information].2. Terms of DeliveryDelivery shall be made on or before [Date of Delivery] from the port of [Port of Origin] to the port of [Port of Destination]. Any delay shall be notified to the Buyer by the Seller in writing at least [Number of Days] days prior to the agreed date of delivery.3. Price and PaymentThe total price for the contracted commodity shall be [Total Price in Currency]. The Buyer shall make payment within [Payment Term] upon receipt of the invoice from the Seller.4. Quality and Inspection5. Insurance and Risk Transfer6. Delay and Force Majeure7. Warranty and Claims8. Contract Amendment and TerminationThis contract may be modified or terminated only by mutual consent in writing signed by both parties or in accordance with relevant laws and regulations applicable under either party’s country’s law.9. Disputes SettlementFailure to agree on such place, each party may request arbitration at its own country’s arbitration institution located in its capital city respectively.If any party fails to perform its contractual obligations, such failure may be considered as a breach of contract underapplicable laws and regulations, subject to compensation for losses incurred by non-breaching party.If such dispute cannot be settled through negotiation or arbitration, it may be submitted to court in accordance with applicable laws and regulations under either party’s country’s law.Both parties agree that this contract shall be governed by and interpreted in accordance with laws applicable under either party’s country’s law, except otherwise stipulated by applicable international trade agreements or conventions to which both parties are parties.The language of this contract is English and shall be deemed valid whether signed by parties orally or confirmed by any party’s representative or other documents with equivalent legal effect.Upon execution in duplicate originals; each party retains one original copy for record purposes only..篇2国际贸易合同（International Trade Contract）本合同由以下双方签订：买方（Buyer）：___________卖方（Seller）：___________鉴于买方和卖方同意按照本合同规定的条款进行国际贸易，双方特此达成如下协议：一、商品与数量（Commodity and Quantity）1. 卖方同意向买方提供以下商品：___________ （商品名称、规格、数量等详细信息）。
国际贸易合同范本英文(分享)6篇
国际贸易合同范本英文（分享）6篇篇1International Trade Contract TemplateThis International Trade Contract is made and entered into on [date], by and between:Seller: [Name of Seller]Address: [Seller's Address]City: [City], Country: [Country]Telephone: [Seller's Telephone Number]Email: [Seller's Email]Buyer: [Name of Buyer]Address: [Buyer's Address]City: [City], Country: [Country]Telephone: [Buyer's Telephone Number]Email: [Buyer's Email]Whereas Seller desires to sell and Buyer desires to purchase the following goods/services:Description of goods/services: [Description]Quantity: [Quantity]Price: [Price]Delivery Date: [Delivery Date]Payment Terms: [Payment Terms]Incoterm: [Incoterm]1. Terms of Sale:1.1 Seller agrees to sell and deliver the goods/services to Buyer in accordance with the description, quantity, price, delivery date, payment terms, and incoterm specified above.1.2 Buyer agrees to purchase and accept delivery of the goods/services from Seller in accordance with the terms specified above.2. Price and Payment:2.1 The total price of the goods/services shall be [Total Price] and shall be paid by Buyer to Seller in [Currency] upon delivery.2.2 Payment shall be made by [Payment Method] to the bank account designated by Seller.3. Delivery:3.1 Seller shall deliver the goods/services to Buyer on or before the delivery date specified above.3.2 Delivery shall be made to the address specified by Buyer or as otherwise agreed upon by the parties.4. Title and Risk:4.1 Title to the goods/services shall pass to Buyer upon delivery.4.2 Risk of loss or damage to the goods/services shall pass to Buyer upon delivery.5. Inspection and Acceptance:5.1 Buyer shall have [Number of Days] days from the date of delivery to inspect the goods/services and notify Seller in writing of any non-conformities.5.2 If Buyer fails to notify Seller within the specified time period, the goods/services shall be deemed accepted.6. Warranty:6.1 Seller warrants that the goods/services shall conform to the description provided and be free from defects in material and workmanship.6.2 Seller's liability under this warranty shall be limited to the repair, replacement, or refund of the purchase price of thenon-conforming goods/services.7. Force Majeure:7.1 Neither party shall be liable for any failure or delay in performance under this Contract due to events beyond its reasonable control, including but not limited to acts of God, strikes, and natural disasters.8. Governing Law and Dispute Resolution:8.1 This Contract shall be governed by the laws of [Country].8.2 Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City] in accordance with the rules of [Arbitration Institution].In witness whereof, the parties hereto have executed this International Trade Contract as of the date first above written.Seller: [Signature]Buyer: [Signature]篇2International Trade Contract TemplateThis International Trade Contract Template is hereby entered into by and between [Seller Name], located at [Seller Address], and [Buyer Name], located at [Buyer Address], collectively referred to as the "Parties".1. Products and QuantitySeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products:- Product Name 1: Quantity- Product Name 2: Quantity2. PriceThe total price for the products shall be [Total Price], payable as follows:- Deposit: [Deposit Amount]- Balance: [Balance Amount]The payment shall be made in [Currency] through [Payment Method].3. DeliverySeller shall deliver the products to Buyer's premises located at [Delivery Address] on or before the agreed-upon delivery dateof [Delivery Date]. Buyer shall be responsible for all shipping costs.4. Quality AssuranceSeller shall ensure that the products delivered conform to the specifications as agreed upon by the Parties. Any defects or nonconformities shall be reported by Buyer within [Number] days of receipt of the products.5. InspectionBuyer shall have the right to inspect the products upon delivery. Any rejection or discrepancy shall be promptly communicated to Seller in writing.6. Force MajeureNeither Party shall be liable for any delay or failure in the performance of the contract due to causes beyond their reasonable control, including but not limited to acts of God, strikes, war, or governmental regulations.7. Governing LawThis contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arisingout of or related to this contract shall be resolved through arbitration in [Arbitration Location].8. ConfidentialityThe Parties agree to keep all confidential information disclosed during the performance of this contract confidential and not disclose it to any third party without prior written consent.IN WITNESS WHEREOF, the Parties have executed this contract on the date first above written.________________________[Seller Name]________________________[Buyer Name]This International Trade Contract Template constitutes the entire agreement between the Parties and supersedes all prior agreements, negotiations, and understandings, whether written or oral. By signing below, the Parties acknowledge and agree to the terms and conditions set forth in this contract.(Signature)Date: _______________________Place: _______________________篇3International Trade Contract TemplateThis International Trade Contract (the “Contract”) is made and entered into on [date], between [Seller], a company incorporated in [country], with a registered address at [address], and [Buyer], a company incorporated in [country], with a registered address at [address].1. PartiesSeller: [Seller name]Buyer: [Buyer name]2. Product DescriptionThe Seller agrees to sell and deliver to the Buyer the following products:- Product name:- Quantity:- Quality:- Price:- Delivery date:- Payment terms:3. Delivery TermsThe Seller shall deliver the products to the Buyer at the following location:Delivery address:Delivery method:Delivery date:Risk of loss shall pass to the Buyer upon delivery of the products.4. Payment TermsThe Buyer shall pay the Seller the total sum of [amount] for the products in accordance with the following payment terms:- [Describe payment terms]5. Quality AssuranceThe Seller warrants that the products shall be of satisfactory quality, fit for their intended purpose, and shall conform to any specifications agreed upon by the parties.6. Inspection and AcceptanceThe Buyer shall have the right to inspect the products upon delivery. Any defects or non-conformities shall be notified to the Seller in writing within [number] days of delivery.7. Force MajeureNeither party shall be liable for any failure or delay in performance under this Contract due to circumstances beyond its control, including but not limited to acts of God, war, riot, civil disturbance, government action, or natural disaster.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country].9. Dispute ResolutionAny dispute arising out of or in connection with this Contract shall be resolved through negotiations between the parties. If the dispute cannot be resolved amicably, it shall be referred toarbitration in accordance with the rules of [arbitration institution].10. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]By: [Authorized signatory]Title: [Title]Date:[Buyer]By: [Authorized signatory]Title: [Title]Date:This International Trade Contract is entered into and effective as of the date set forth above.***This is a template of an International Trade Contract, and is provided for informational purposes only. It is advisable to seek legal advice before using this Contract in a real transaction.***篇4International Trade Contract TemplateThis International Trade Contract (the “Contract”) is made and entered into on [Date] by and between [Name of Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Name of Buyer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].Recitals1. The Seller is engaged in the business of [Description of Seller’s Business].2. The Buyer is engaged in the business of [Description of Buyer’s Business].3. The Seller desires to sell and deliver the Goods (as defined below) to the Buyer, and the Buyer desires to purchase andreceive the Goods from the Seller, subject to the terms and conditions set forth in this Contract.AgreementIn consideration of the mutual covenants contained herein and other good and valuable consideration, the sufficiency of which is hereby acknowledged, the parties hereby agree as follows:1. Sale and Purchase of Goods1.1. Subject to the terms and conditions of this Contract, the Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase and receive from the Seller, the goods (the “Goods”) as described in Exhibit A attached hereto.2. Purchase Price2.1. The purchase price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount], payable in [Currency] upon delivery of the Goods to the Buyer.3. Delivery3.1. The Seller shall deliver the Goods to the Buyer at the address specified by the Buyer within [Number of Days] daysfrom the date of this Contract. The Buyer shall bear all costs and risks of transportation and delivery of the Goods.4. Inspection and Acceptance4.1. The Buyer shall inspect the Goods promptly upon delivery and shall notify the Seller in writing of anynon-conforming Goods or other defects within [Number of Days] days of delivery.4.2. The Buyer shall be deemed to have accepted the Goods and waived any claims for non-conforming Goods or other defects if the Buyer fails to notify the Seller within the specified time period.5. Representations and Warranties5.1. The Seller represents and warrants that:(a) the Goods are free from any liens or encumbrances;(b) the Goods conform to the specifications set forth in Exhibit A; and(c) the Seller has the right and authority to sell the Goods.6. Governing Law6.1. This Contract shall be governed by and construed in accordance with the laws of [Country], without regard to its conflict of laws principles.7. Entire Agreement7.1. This Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be executed as of the date first above written.Seller: [Name of Seller]By: [Signature]Name: [Name of Signatory]Title: [Title of Signatory]Buyer: [Name of Buyer]By: [Signature]Name: [Name of Signatory]Title: [Title of Signatory]篇5International Trade Contract TemplateThis International Trade Contract ("Contract") is made and entered into on [Date], by and between [Seller], a company organized and existing under the laws of [Country] with its principal place of business at [Address] ("Seller"), and [Buyer], a company organized and existing under the laws of [Country] with its principal place of business at [Address] ("Buyer").1. Sales and Purchase. Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A hereto (the "Goods") in accordance with the terms and conditions of this Contract.2. Price and Payment. The purchase price for the Goods shall be [Amount] per unit, payable in [Currency]. Buyer shall pay Seller the total purchase price within [Number] days of receipt of the Goods.3. Delivery. Seller shall deliver the Goods to Buyer at [Address] in [City], [Country], on or before [Date]. In the event Seller is unable to deliver the Goods by such date, Buyer may cancel this Contract without any liability.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods within [Number] days of their delivery. IfBuyer determines that the Goods are defective or do not conform to the specifications set forth in Exhibit A, Buyer may return the Goods to Seller at Seller's expense or request a refund.5. Warranties. Seller warrants that the Goods shall be free from defects in materials and workmanship and shall conform to the specifications set forth in Exhibit A. Seller further warrants that it has good and marketable title to the Goods and has the right to sell the Goods to Buyer.6. Force Majeure. Neither party shall be liable for any failure or delay in performance under this Contract if such failure or delay is caused by acts of God, strikes, wars, or any other event beyond the control of the parties.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of [Country].IN WITNESS WHEREOF, the parties hereto have executed this International Trade Contract as of the date first above written.____________________________________________________________[Seller][Buyer]篇6International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into on [Date], by and between:[Name of Seller], a company registered under the laws of [Country], having its registered office at [Address] ("Seller"), and[Name of Buyer], a company registered under the laws of [Country], having its registered office at [Address] ("Buyer").WHEREAS, Seller desires to sell the products listed in Exhibit A ("Products") to Buyer and Buyer desires to purchase the Products from Seller;NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Products: Seller agrees to sell and deliver the Products to Buyer as specified in Exhibit A attached hereto.2. Price: The price for the Products shall be as stated in Exhibit A. Payment shall be made by Buyer to Seller in [Currency] within [Number] days from the date of delivery.3. Delivery: Seller shall deliver the Products to Buyer's designated address as set forth in Exhibit A. Delivery shall be made on or before the date specified in Exhibit A.4. Warranty: Seller represents and warrants that the Products are free from defects in material and workmanship and conform to the specifications set forth in Exhibit A. Seller shall replace or refund the purchase price for any defective Products returned by Buyer.5. Intellectual Property: Seller represents and warrants that it has the right to sell the Products and that the sale and delivery of the Products will not infringe any third-party intellectual property rights.6. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution: Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If the dispute cannot be resolved through negotiation, the parties agree to submit the dispute to arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Name]Title: [Title]Date:Buyer:Name: [Name]Title: [Title]Date:Exhibit AProducts: [Product Description]Price: [Price Per Unit]Delivery Date: [Date]Delivery Address: [Address]。
国际贸易合同协议英文版3篇
国际贸易合同协议英文版3篇全文共3篇示例，供读者参考篇1International Trade Contract AgreementThis International Trade Contract Agreement (the "Agreement") is made and entered into as of [Date], by and between [Company A], a company organized and existing under the laws of [Country A], having its principal place of business at [Address A] ("Company A") and [Company B], a company organized and existing under the laws of [Country B], having its principal place of business at [Address B] ("Company B").1. Scope of AgreementCompany A agrees to sell to Company B, and Company B agrees to purchase from Company A, the goods described in Exhibit A attached hereto and made a part hereof (the "Goods").2. DeliveryCompany A shall deliver the Goods to Company B in accordance with the delivery schedule set forth in Exhibit B attached hereto and made a part hereof. Company A shall beresponsible for all costs related to the delivery of the Goods to the agreed-upon destination.3. Price and PaymentThe purchase price for the Goods shall be as set forth in Exhibit A. Company B shall make payment in full to Company A within [number] days of the delivery of the Goods. Payment shall be made in [currency] by wire transfer to the bank account designated by Company A.4. WarrantiesCompany A warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship. Company B shall have the right to inspect the Goods upon delivery and reject any Goods that do not conform to the specifications. Company A shall replace any defective Goods at no additional cost to Company B.5. Governing LawThis Agreement shall be governed by and construed in accordance with the laws of [Country A].6. ConfidentialityBoth parties agree to keep confidential all information exchanged in connection with this Agreement and not to disclose such information to any third party without the prior written consent of the other party.7. Entire AgreementThis Agreement constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the parties hereto have caused this Agreement to be duly executed as of the date first above written.Company ABy: ___________________________Name: _________________________Title: __________________________Company BBy: ___________________________Name: _________________________Title: __________________________Exhibit ADescription of Goods: [Description]Exhibit BDelivery Schedule: [Schedule]篇2International Trade Contract AgreementThis International Trade Contract Agreement ("Agreement") is entered into on this __ day of ___, 202_ ("Effective Date") by and between _________________ ("Seller") and __________________ ("Buyer"), collectively referred to as the "Parties".1. BackgroundSeller is engaged in the business of manufacturing and selling [description of products or services], and Buyer is engaged in [description of buyer’s business]. Seller desires to sell to Buyer and Buyer desires to purchase from Seller [description of products or services].2. Terms of Sale2.1 Product Description: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the followingproducts/services: [description of products/services].2.2 Quantity: The quantity of products/services to be sold and purchased shall be as specified in Exhibit A attached hereto.2.3 Price: The price for the products/services shall be as specified in Exhibit B attached hereto.2.4 Payment Terms: Buyer shall make payment to Seller in accordance with the payment terms as specified in Exhibit C attached hereto.2.5 Delivery: Delivery shall be made in accordance with the delivery terms as specified in Exhibit D attached hereto.2.6 Quality Assurance: Seller warrants that theproducts/services shall conform to the specifications set forth in Exhibit E attached hereto.3. Term and Termination3.1 This Agreement shall commence on the Effective Date and shall continue until the completion of all obligations hereunder.3.2 Either Party may terminate this Agreement by providing thirty (30) days’ written notice to the other Party.3.3 Upon termination, Buyer shall pay Seller for all products/services delivered prior to termination.4. Confidentiality4.1 The Parties shall keep all terms and conditions of this Agreement confidential and shall not disclose any information to third parties without the other Party’s consent.4.2 This confidentiality provision shall survive the termination of this Agreement.5. Governing LawThis Agreement shall be governed by and construed in accordance with the laws of [jurisdiction].IN WITNESS WHEREOF, the Parties have executed this Agreement on the date first above written.Seller: _______________Buyer: _______________Exhibits:A. Product DescriptionB. PriceC. Payment TermsD. Delivery TermsE. Quality AssuranceThis International Trade Contract Agreement is a legally binding document that outlines the terms and conditions of the sale and purchase of products/services between the Seller and Buyer. It is important for both Parties to review and understand the terms of this Agreement before signing to ensure a successful and mutually beneficial business relationship.篇3International Trade Contract AgreementThis International Trade Contract Agreement (the "Agreement") is made and entered into on this [date], between [Seller], a company organized and existing under the laws of [Country] with its principal place of business at [Address] (the "Seller"), and [Buyer], a company organized and existing under the laws of [Country] with its principal place of business at [Address] (the "Buyer").1. Sale and Purchase of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase and accept delivery of, the following goods (the "Goods"): [Description of Goods]. The quantity, quality, and specifications of the Goods shall be as set forth in Schedule A attached hereto.2. Price: The purchase price for the Goods shall be as set forth in Schedule A. The price shall be paid by the Buyer to the Seller in accordance with the terms and conditions set forth herein.3. Delivery: The Seller shall deliver the Goods to the Buyer at the destination specified in Schedule A. The Seller shall bear all costs and risks of transporting the Goods to the destination.4. Payment Terms: The Buyer shall pay the purchase price for the Goods in accordance with the terms specified in Schedule A. Payment shall be made in [currency] to the Seller's designated bank account.5. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall have [number] days from the date of delivery to notify the Seller of any non-conformance with the specifications set forth in Schedule A. If the Buyer fails to provide timely notice of any non-conformance, the Goods shall be deemed accepted.6. Disclaimer of Warranties: The Seller makes no warranties, express or implied, with respect to the Goods, including, without limitation, any warranties of merchantability or fitness for a particular purpose.7. Force Majeure: Neither party shall be liable for any failure or delay in performance under this Agreement to the extent caused by circumstances beyond its reasonable control, including, without limitation, acts of God, natural disasters, war, or terrorism.8. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising under or in connection with this Agreement shall be subject to the exclusive jurisdiction of the courts of [Country].IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the date first above written.[Signature of Seller] [Signature of Buyer][Printed Name of Seller] [Printed Name of Buyer]Schedule A1. Description of Goods: [Description]2. Quantity: [Number]3. Price: [Amount]4. Delivery Date: [Date]。
经贸英语合同范本(5篇)
经贸英语合同范本(5篇)（经典版）编制人：__________________审核人：__________________审批人：__________________编制单位：__________________编制时间：____年____月____日序言下载提示：该文档是本店铺精心编制而成的，希望大家下载后，能够帮助大家解决实际问题。
文档下载后可定制修改，请根据实际需要进行调整和使用，谢谢!并且，本店铺为大家提供各种类型的经典范文，如工作总结、工作计划、合同协议、条据书信、讲话致辞、规章制度、策划方案、句子大全、教学资料、其他范文等等，想了解不同范文格式和写法，敬请关注!Download tips: This document is carefully compiled by this editor. I hope that after you download it, it can help you solve practical problems. The document can be customized and modified after downloading, please adjust and use it according to actual needs, thank you!Moreover, our store provides various types of classic sample texts for everyone, such as work summaries, work plans, contract agreements, document letters, speeches, rules and regulations, planning plans, sentence summaries, teaching materials, other sample texts, etc. If you want to learn about different sample formats and writing methods, please pay attention!经贸英语合同范本(5篇)经贸英语合同范本第1篇日期：合同号码：date: contract买方：(the buyers)卖方：(the sellers)兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品：this contract is made by and between the buyers and the sellers; whereby the buyers agree to buy and the sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter:（1)商品名称:name of commodity：(2）数量：quantity:(3）单价：unit price:（4)总值：total value:（5)包装：packing:（6)生产国别：country of origin :（7)支付条款：terms of payment:（8)保险：insurance:(9)装运期限：time of shipment:(10)起运港：port of lading:(11)目的港：port of destination:(12）索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不附，除属保险公司或船方责任外，买方有权凭X商检出具的检验证书或有关文件向卖方索赔换货或赔款。
国际贸易合同英语版
国际贸易合同英语版English:International trade contracts are crucial for governing the terms and conditions of trade agreements between parties from different countries. These contracts typically outline the responsibilities and obligations of each party, including the quality specifications of the goods or services being exchanged, the pricing and payment terms, the delivery schedule, and the resolution of disputes. Furthermore, international trade contracts often include clauses that address applicable laws, jurisdiction in case of legal disputes, force majeure events, and intellectual property rights. It is essential for both parties to carefully review and negotiate the terms of the contract to ensure clarity, fairness, and alignment with their respective interests. Effective communication, transparency, and trust between the parties are key to establishing successful international trade relationships based on mutually beneficial terms.中文翻译:国际贸易合同对于规范不同国家之间的贸易协议的条款和条件至关重要。
国际贸易合同范本英文5篇
国际贸易合同范本英文5篇篇1International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into between the following parties:Seller: [Name of Seller]Address: [Address of Seller]Contact: [Contact Information of Seller]Buyer: [Name of Buyer]Address: [Address of Buyer]Contact: [Contact Information of Buyer]1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following product(s) in accordance with the terms and conditions of this Contract:Description: [Description of the Product]Quantity: [Quantity of the Product]Quality: [Quality Standards of the Product]Price: [Price per Unit of the Product]Currency: [Currency in which the Price is expressed]2. Delivery TermsThe Seller shall deliver the product(s) to the Buyer at the following location:Delivery Address: [Delivery Address]The delivery shall be made on or before the following date: [Delivery Date]The Seller shall be responsible for arranging the transportation of the product(s) to the specified location.3. Payment TermsThe Buyer shall make the payment for the product(s) in the following manner:Payment Method: [Method of Payment]Payment Schedule: [Payment Schedule]The Seller shall provide the Buyer with an invoice for the product(s) upon delivery.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the product(s) upon delivery and shall have [Number of Days] days to accept or reject the product(s) based on the quality standards agreed upon in this Contract.If the Buyer finds the product(s) to be non-conforming to the quality standards, the Buyer shall have the right to reject the product(s) and request a replacement or refund.5. WarrantyThe Seller warrants that the product(s) are free from defects in materials and workmanship and comply with all applicable laws and regulations. The Seller agrees to replace or refund any defective product(s) within a reasonable time frame.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute ResolutionAny disputes arising out of or in connection with this Contract shall be resolved through arbitration in accordance with the rules of [Arbitration Body].8. ConfidentialityBoth parties agree to keep all information exchanged during the course of this Contract confidential and not to disclose it to any third party without the other party's consent.9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements, arrangements, and understandings.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date first above written.Seller: _______________________Buyer: _______________________Date: ________________________篇2International Trade Contract TemplateThis International Trade Contract is made effective as of [Date], between [Seller], located at [Seller's Address] and [Buyer], located at [Buyer's Address.1. Product Description:The Seller agrees to sell and deliver the following products: [Description of the Products], to the Buyer in accordance with the terms and conditions of this contract.2. Quantity:The Seller agrees to deliver a quantity of [Quantity] of the products as mentioned in the Product Description section.3. Price:The total price for the products to be delivered under this contract is [Total Price], payable in [Currency]. The payment terms shall be [Payment Terms].4. Delivery:The Seller agrees to deliver the products to the Buyer at [Delivery Location] on or before the delivery date specified in this contract. The Buyer shall bear all costs related to the delivery of the products.5. Inspection:The Buyer shall have the right to inspect the products upon delivery and shall notify the Seller of any defects or discrepancies within [Number of Days] days of delivery.6. Acceptance:The Buyer shall be deemed to have accepted the products if no notice of rejection is given within the specified time frame. Any defects or discrepancies noticed by the Buyer shall be remedied by the Seller at no additional cost to the Buyer.7. Warranties:The Seller warrants that the products delivered under this contract are of good quality, free from defects, and conform to the specifications set forth in this contract.8. Governing Law:This contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising out of or related to this contract shall be resolved through arbitration in accordance with the rules [Arbitration Rules].9. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral, relating to the subject matter herein.IN WITNESS WHEREOF, the parties hereto have executed this International Trade Contract as of the date first above written.[Seller's Signature] [Buyer's Signature][Seller's Name] [Buyer's Name]This International Trade Contract Template is provided for reference purposes only and may need to be customized to suit the specific requirements of the parties involved in the transaction. It is advisable to seek legal advice before entering into any international trade contracts.篇3International Trade Contract SampleThis International Trade Contract ("Contract") is entered into on [date], by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address] ("Seller"), and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address] ("Buyer").WHEREAS, Seller is engaged in the business of manufacturing and selling [products/services], and Buyer desires to purchase [products/services] from Seller for resale in [country];NOW, THEREFORE, in consideration of the mutual covenants and promises contained herein, Seller and Buyer hereby agree as follows:1. Product/Service DescriptionSeller agrees to sell to Buyer and Buyer agrees to purchase from Seller [describe the products/services], in the quantities and at the prices set forth in Exhibit A, attached hereto and incorporated herein by reference.2. Delivery TermsSeller shall deliver the products/services to Buyer at the location specified in Exhibit A in accordance with the delivery schedule set forth therein. Any delay in delivery shall entitle Buyer to liquidated damages as set forth in Exhibit A.3. Price and Payment TermsThe price for the products/services shall be as set forth in Exhibit A. Buyer shall make payment to Seller in [currency] within [number] days of receipt of the invoice.4. Quality AssuranceSeller warrants that the products/services shall conform to the specifications set forth in Exhibit A and shall be ofmerchantable quality. In the event of any non-conformity, Buyer may reject the products/services and seek remedies as set forth in Exhibit A.5. Inspection and AcceptanceBuyer shall have the right to inspect the products/services upon delivery. Buyer shall notify Seller of any non-conformities within [number] days of receipt. Failure to notify Seller within the specified time frame shall constitute acceptance of the products/services.6. Intellectual Property RightsSeller represents and warrants that it has the right to sell the products/services and that the sale of the products/services does not infringe upon any third-party intellectual property rights.7. Limitation of LiabilityIn no event shall either party be liable to the other for any consequential, incidental, special, or punitive damages arising out of or related to this Contract, even if the party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country], without regard to its conflicts of law principles.9. Dispute ResolutionAny dispute arising out of or relating to this Contract shall be resolved through arbitration in [city], [country], in accordance with the rules of [arbitration organization]. The decision of the arbitrator shall be final and binding on the parties.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Printed Name and Title of Seller] [Printed Name and Title of Buyer]Exhibit A: Price List and Delivery ScheduleThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements and understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇4International Trade Contract TemplateThis International Trade Contract Template (the "Contract") is entered into as of [Date], by and between [Company A], a [Country A] corporation having its principal place of business at [Address A] ("Seller"), and [Company B], a [Country B] corporation having its principal place of business at [Address B] ("Buyer"). Seller and Buyer may be collectively referred to as the "Parties."1. Product DescriptionSeller agrees to sell and deliver to Buyer the following products (the "Products"): [Description of Products]. The Products shall be delivered in accordance with the specifications set forth in Exhibit A attached hereto and incorporated herein by reference.2. Price and PaymentThe price of the Products shall be [Price] per unit. Buyer shall pay Seller the total price for the Products in the amount of [Total Price], which shall be paid upon delivery of the Products. Payment shall be made in [Currency] to the bank account specified by Seller.3. DeliverySeller shall deliver the Products to Buyer within [Delivery Timeframe] days of the Effective Date. Delivery shall be made to [Delivery Location]. Buyer shall be responsible for all costs associated with the transportation and delivery of the Products to the Delivery Location.4. InspectionBuyer shall have the right to inspect the Products upon delivery. Buyer must notify Seller in writing of any defects or nonconformities in the Products within [Inspection Period] days of delivery. Failure to provide written notice within the Inspection Period shall constitute acceptance of the Products.5. Quality AssuranceSeller represents and warrants that the Products shall be of good quality and free from defects in material and workmanship. Seller shall replace any defective Products at no additional cost to Buyer.6. Title and Risk of LossTitle to and risk of loss of the Products shall pass to Buyer upon delivery. Buyer shall bear all risk of loss or damage to the Products after delivery.7. Intellectual Property RightsSeller retains all rights, title, and interest in and to any intellectual property associated with the Products. Buyer shall not use Seller's intellectual property without Seller's prior written consent.8. ConfidentialityThe Parties agree to keep all information related to this Contract confidential and not disclose it to any third parties without the other Party's consent.9. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Country A]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City, Country A] in accordance with the rules of the [Arbitration Association].10. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the Products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the Effective Date.[Company A]By: ___________________Name: _________________Title: ___________________[Company B]By: ___________________Name: _________________Title: ___________________EXHIBIT ASpecifications of the Products:[Description of Specifications]篇5International Trade Contract TemplateThis International Trade Contract (the "Contract") is entered into as of [date] by and between [Seller Name], a company organized and existing under the laws of [country], with its principal place of business at [address] (the "Seller"), and [Buyer Name], a company organized and existing under the laws of[country], with its principal place of business at [address] (the "Buyer").1. Product DescriptionSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following products:- Product Name- Quantity- Specifications2. Price and Payment TermsThe total price for the products shall be [amount] USD. The payment shall be made in [currency] within [number] days of the delivery date. Payment shall be made by [payment method].3. Delivery TermsThe products shall be delivered by Seller to Buyer at [delivery location]. Delivery shall be made on [delivery date]. The delivery terms shall be [Incoterms].4. Inspection and AcceptanceBuyer shall inspect the products promptly upon delivery. If Buyer finds the products to be non-conforming or defective,Buyer shall notify Seller within [number] days of delivery. Seller shall have the right to remedy any non-conformities or defects within a reasonable time.5. WarrantySeller warrants that the products shall conform to the specifications and be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to repairing or replacing the non-conforming or defective products.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [country]. Any dispute arising out of or relating to this Contract shall be submitted to the exclusive jurisdiction of the courts of [country].7. Force MajeureNeither party shall be liable for any failure or delay in the performance of its obligations under this Contract caused by events beyond its reasonable control, including but not limited to acts of God, war, terrorism, fire, flood, or government actions.8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the products and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]By: [Authorized Signatory] By: [Authorized Signatory]Name: Name:Title: Title:。
英语版国际贸易合同5篇
英语版国际贸易合同5篇篇1国际贸易合同（International Trade Contract）合同编号: ___________甲方（买方）：____________________住址：__________________________________联系方式：_____________________________乙方（卖方）：_____________________住址：_________________________________联系方式：_____________________________鉴于甲方需要购买以下商品，乙方同意按照本合同规定的条款和条件出售该商品，双方经友好协商一致，达成如下协议：一、商品描述（Description of Goods）1. 商品名称：______________________________ （Name of Goods）2. 商品规格：______________________________ （Specifications）3. 商品数量：______________________________ （Quantity）4. 商品单价：______________________________ （Unit Price）5. 总金额：________________________________ （Total Amount）6. 付款方式：________________________________ （Payment Terms）7. 付款期限：________________________________ （Payment Deadline）二、交货和验收（Delivery and Acceptance）1. 交货期限：乙方应在合同签署后的________天内完成交货。
（Delivery Deadline）2. 交货地点：_______________________________________ （Delivery Point）3. 运输方式：_______________________________________ （Transportation Mode）4. 验收标准：按照合同规定的规格和质量标准进行验收。
国际贸易合同范本英文6篇
国际贸易合同范本英文6篇篇1International Trade Contract TemplateThis International Trade Contract (“Contract”) is entered into on [Date] by and between [Seller], with a registered address at [Address], and [Buyer], with a registered address at [Address].1. Sale of Goods1.1 Seller agrees to sell and deliver the goods described in Exhibit A to Buyer, and Buyer agrees to accept and pay for such goods in accordance with the terms and conditions of this Contract.2. Price2.1 The price for the goods shall be [Price] per unit as specified in Exhibit A. The total price for the goods shall be as specified in Exhibit A.3. Payment3.1 Buyer shall pay the total price for the goods within [Number] days of receiving the invoice from Seller.4. Delivery4.1 Seller shall deliver the goods to Buyer’s designated location as specified in Exhibit A. Delivery shall be completed within [Number] days of the receipt of payment.5. Quality Assurance5.1 Seller represents and warrants that the goods sold hereunder will conform to the specifications set forth in Exhibit A. Buyer shall have the right to inspect the goods upon delivery and reject any goods that do not conform to the specifications.6. Force Majeure6.1 Neither party shall be liable for any failure to perform its obligations under this Contract if such failure is caused by events beyond its reasonable control, including but not limited to acts of God, war, terrorism, and natural disasters.7. Governing Law7.1 This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City], [Country].8. Entire Agreement8.1 This Contract constitutes the entire agreement between the parties with respect to the sale of goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first written above.[Seller]By: _______________________Name: _____________________Title: ______________________[Buyer]By: _______________________Name: _____________________Title: ______________________Exhibit ADescription of Goods: [Description]Quantity: [Number]Unit Price: [Price]Total Price: [Total Price]This International Trade Contract is hereby accepted and agreed to by the parties on the date written above.Please note that this is a template and may need to be customized to fit the specific needs of the parties involved. It is recommended to seek legal advice before entering into any international trade contracts.篇2International Trade Contract TemplateThis International Trade Contract Template (the "Contract") is entered into on [date] by and between [Party A], located at [address], and [Party B], located at [address], collectively referred to as the "Parties."1. Subject of ContractParty A agrees to sell and deliver to Party B the following goods or services:Description of Goods/Services:Quantity:Unit Price:Total Price:2. Payment TermsParty B agrees to pay Party A according to the following terms:Payment Method:Currency:Payment Schedule:Late Payment Penalties:3. Delivery TermsThe goods/services shall be delivered to the following address:Delivery Date:Delivery Method:Delivery Cost:Risk of loss shall pass to Party B upon delivery of the goods/services.4. Quality AssuranceThe goods/services provided under this Contract shall conform to the specifications set forth in the contract. Party Bshall have the right to inspect the goods/services upon delivery and reject any non-conforming items within [number] days.5. Force MajeureNeither Party shall be liable for any delay or failure to perform its obligations under this Contract due to circumstances beyond its reasonable control, including but not limited to natural disasters, acts of government, and labor strikes.6. Dispute ResolutionAny disputes arising out of this Contract shall be resolved through negotiation between the Parties. If the dispute cannot be resolved amicably, the Parties agree to submit to arbitration in [jurisdiction] in accordance with the rules of [Arbitration Institution].7. ConfidentialityBoth Parties agree to keep the terms and conditions of this Contract confidential and not disclose them to any third party without the written consent of the other Party.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [jurisdiction].9. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.[Party A]Name:Title:Date:[Party B]Name:Title:Date:This International Trade Contract Template is provided for informational purposes only and should not be construed as legal advice. Parties are advised to consult with legal counsel before entering into any contractual agreements.篇3International Trade ContractThis International Trade Contract ("Contract") is made and entered into as of [Date], by and between [Company Name], with its principal place of business at [Address] ("Seller"), and [Company Name], with its principal place of business at [Address] ("Buyer").1. Subject Matter of ContractThe Seller agrees to sell and deliver to the Buyer the following goods:- Description of Goods: [Description]- Quantity: [Quantity]- Price: [Price]- Delivery Date: [Date]2. Payment TermsThe Buyer agrees to pay the Seller the total amount of [Amount] for the goods described in section 1. The payment shall be made in [Currency] within [Number] days of the delivery date.3. DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Address]. The Seller shall bear all costs and risks associated with the transport of the goods until they are delivered to the Buyer.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the goods upon delivery. If the Buyer finds any defects or non-conformities with the contract, the Buyer shall notify the Seller in writing within [Number] days of delivery. The Seller shall be responsible for replacing the defective goods at no additional cost to the Buyer.5. Force MajeureNeither party shall be liable for any delay or failure to perform its obligations under this Contract due to circumstances beyond its reasonable control, including but not limited to acts of God, war, terrorism, or natural disasters.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved througharbitration in [City], in accordance with the rules of the [Arbitration Institution].7. Entire AgreementThis Contract constitutes the entire understanding between the parties with respect to the subject matter hereof and supersedes all prior agreements, understandings, and discussions, whether written or oral.IN WITNESS WHEREOF, the parties have caused this Contract to be executed by their duly authorized representatives as of the date first above written.Seller: _______________________ Buyer: _______________________篇4International Trade Contract TemplateThis International Trade Contract ("Contract") is made and entered into on [Date] by and between [Exporter], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Importer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].RECITALSExporter is engaged in the business of manufacturing and exporting [Products] and desires to sell and export such Products to Importer, and Importer is engaged in the business of importing and selling [Products].NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein and for other valid and valuable consideration, the parties hereto agree as follows:1. SALE AND PURCHASE1.1 Subject to the terms and conditions of this Contract, Exporter agrees to sell and deliver to Importer, and Importer agrees to purchase and receive from Exporter, the quantity and specifications of [Products] set forth in Exhibit A attached hereto.1.2 The purchase price for the Products shall be as set forth in Exhibit A, and shall be paid by Importer to Exporter in accordance with the payment terms set forth in Section 3 below.2. DELIVERY2.1 The Products shall be delivered to the location specified by Importer in Exhibit A, and shall be shipped by Exporter using a reputable carrier selected by Exporter.2.2 The risk of loss or damage to the Products shall pass from Exporter to Importer upon delivery of the Products to the carrier for shipment.3. PAYMENT3.1 Payment for the Products shall be made by Importer to Exporter as follows:- [Insert payment terms, e.g., 30% deposit upon signing of contract, balance due upon delivery of Products]3.2 Any amounts unpaid when due shall accrue interest at a rate of [Insert interest rate] per annum.4. QUALITY ASSURANCE4.1 Exporter shall ensure that the Products delivered to Importer shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship.4.2 If Importer determines that any Products delivered by Exporter do not conform to the specifications set forth in Exhibit A, Importer shall have the right to reject such Products, and Exporter shall promptly replace such Products at its own expense.5. WARRANTIES5.1 Exporter hereby warrants that the Products delivered to Importer shall be of merchantable quality and fit for the intended purpose.5.2 Exporter further warrants that it has full power and authority to enter into and perform its obligations under this Contract.6. GOVERNING LAW AND DISPUTE RESOLUTION6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].6.2 Any dispute arising out of or in connection with this Contract shall be resolved by arbitration in accordance with the rules of [Arbitration Association].7. MISCELLANEOUS7.1 This Contract, together with its Exhibits, constitutes the entire agreement between the parties with respect to the subject matter hereof, and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.7.2 This Contract may be amended or modified only by a written instrument executed by the parties.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.EXPORTER:[Exporter Name]By: _______________________Name:_____________________Title:_____________________IMPORTER:[Importer Name]By: _______________________Name:_____________________Title:_____________________EXHIBIT A[Specifications of Products][Quantity of Products][Price of Products][Delivery Location]篇5International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into on [insert date], by and between [Seller], with a business address at [insert address], and [Buyer], with a business address at [insert address] (collectively referred to as the "Parties").1. Sale of GoodsSeller agrees to sell and Buyer agrees to purchase the following goods (the "Goods") in accordance with the terms and conditions of this Contract:- Description of Goods:- Quantity:- Unit Price:2. DeliverySeller agrees to deliver the Goods to the Buyer's designated location (the "Delivery Location") on or before [insert delivery date]. The Buyer shall be responsible for all costs associated with the delivery of the Goods.3. PaymentBuyer agrees to pay Seller the total purchase price of the Goods, in the amount of [insert total amount], upon the delivery of the Goods. Payment shall be made in [insert currency] by [insert payment method].4. Inspection and AcceptanceBuyer shall inspect the Goods upon delivery and shall notify Seller of any defects or non-conformities within [insert number] days. Failure to notify Seller within such time frame shall constitute acceptance of the Goods.5. WarrantiesSeller warrants that the Goods provided under this Contract shall conform to the specifications agreed upon by the Parties and shall be free from defects in materials and workmanship for a period of [insert warranty period].6. Force MajeureNeither Party shall be held liable for any failure or delay in performing its obligations under this Contract if such failure or delay is due to a force majeure event, including but not limited to acts of God, war, terrorism, strikes, and natural disasters.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [insert governing law jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in accordance with the rules of the [insert arbitration institution].8. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________篇6International Trade Contract TemplateThis International Trade Contract ("Contract") is entered into on this ____ day of _______, 20__, between _________________, a company organized and existing under the laws of_______________ and having its principal place of business at___________________ ("Seller"), and _________________, a company organized and existing under the laws of _______________ and having its principal place of business at ________________ ("Buyer").Whereas, Seller is engaged in the business of manufacturing and selling ___________________, and Buyer is engaged in the business of ___________________;Whereas, Buyer desires to purchase certain quantities of the Product from Seller, and Seller desires to sell the Product to Buyer on the terms and conditions set forth herein;Now, therefore, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Product. Seller agrees to sell and Buyer agrees to purchase the following quantities of the Product: ________________________.2. Price. The price of the Product shall be _____________________ per unit.3. Delivery. Delivery of the Product shall be made on or before _____________, 20__.4. Payment. Buyer shall pay Seller for the Product upon receipt of the Product and invoice. Payment shall be made in_____________________.5. Quality Control. Seller warrants that the Product shall conform to the specifications set forth in the Product datasheet.6. Inspection. Buyer shall have the right to inspect the Product upon delivery and reject any non-conforming Product.7. Termination. Either party may terminate this Contract upon written notice to the other party if a material breach of this Contract occurs.8. Governing Law. This Contract shall be governed by the laws of ______________________.9. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.In witness whereof, the parties hereto have caused this Contract to be duly executed by their respective authorized representatives.Seller: ________________________Buyer: ________________________Date: ________________________。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
5.open an (a) … L/C with (bank) in favor of… 由…银行开出一份以…为受益人的… 银行开出一份以…为受益人的… 信用证 6.lodge, raise, file, make, put in /forward a claim with/on (sth.) against (sb.) for (causes/loss) 由于… 由于…对…向…提起索赔
A sales contract refers to a contract whereby the seller transfers the ownership of an object to the buyer and the buyer pays the price for the object. We export goods to foreign countries through business letters or oral consultations, we usually, according to their complexity and importance, conclude a written contract or a more convenient confirmation to serve as a formal basis.
13. in the absence of
否则
1.买方应于装运期前20天由广州中国银行 1.买方应于装运期前20天由广州中国银行 开出以卖方为受益人的不可撤销的信用证。 须凭向开证行开出的汇票和本合同第10条 须凭向开证行开出的汇票和本合同第10条 规定的装船单证支付。该信用证直至装船 后15天有效。 15天有效。 2．在货物制造和装运过程中发生不可抗力 时，卖方对延迟交货或不交货不负责任。 3．关于本合同项下售出的货物是否适合其 他用途，卖方不作任何保证。 4．如买方不能及时派船，卖方有权要求赔 偿损失。 5.买方在开给售方的信用证上应填注本确 5.买方在开给售方的信用证上应填注本确 认书号码。
Due to the standardized contents change little, we can simplify such contracts into table, it’s easy to fill in. E.g the reading material (A).
In drafting a contract, we shall faithfully record the consensus two parties have reached, and be clear and specific to our best, avoiding vague and ambiguous, for the quality, specifications, packing, we should stipulate the related details, and quantity, price terms and value shall be accurate.
Total amount of zinc (ZnS + BaSO4)含量 BaSO4)含量 min. 99% Total amount of zinc (ZnS)含量 (ZnS)含量 min. 28-30% 28Zinc oxide (ZnO)含量 (ZnO)含量 max. 0.6% Volatile matter at 105oc挥发物 max. 0.3% Matter soluble in water水溶物 max. 0.5% water水溶物 Residue on sieve (63um)筛余物 max. 0.1% (63um)筛余物 Oil absorption value (g/100g)吸油量 max. 14 (g/100g)吸油量 Alkalinity of the aqueous extract 水提物碱度 neutral
Notes
close, reach, make, place, enter into, sign, conclude 签订… 签订… Whereby 兹经
1.Lithopone: is a white pigment, a mixture of barium sulfate and zinc sulfide. It is used in interior paints and in some enamels.
Comprehension ：合同的内容 Application ：to sell on credit, to buy on credit, payment on open account, in consequence of, after receipt of the same, in the absence of, Remittance forms(T/T, M/T and D/T),Collection forms(D/A, D/P), in accordance with
2.to be designated by … At one’s option 由…指定 3.to be covered by (sb.) for(%) of (value) against(risks) as per(insurance clauses) 由…根据…条款按…总额的…%投保… 根据…条款按…总额的… 投保… 险别 4.have the (prior) consent of … 征得… 征得…（事先）同意
7.disputes arising out of the performance relating to … 因执行…而引发的或与… 因执行…而引发的或与…有关的争议 8.furnish … with… 向…提供… 提供… 9.be/hold liable for (sth.) 对…负法律责任
10.be borne by (sb.) be for one’s account be at one’s expense 费用由… 费用由…支付 11.findings/award/final decisions 裁决结果 12. in consequence of（reason） of（reason） 由于… 由于…
The contents of such contracts usually include the contract name, number, signing date, location, name of goods, quality, specifications, quantities, packing, pricing terms and value, as well as insurance, transportation, payment, inspection, claims, Force Majeure, and arbitration terms.
Chapter 2 writing for sales contract
Writing Requirements
Grasp the contents of sales contract and related phrases.Keep good reading, writing, and translating this contract. 掌握售卖合同的内容及相关词组。会 读、会写、会译有关合同。 售卖合同所包括的内容（重点） 售卖合同所包括的内容（重点）
Memorization：shipping mark, port
of shipment, port of destination, time of shipment, terms of payment, irrevocable sight letter of credit, negotiation, commodity inspection, arbitration, loading port and destination.