伺服电机样本
三洋伺服电机P系列样本
1.0
1.9
1.0
P10B13050BXS 《 130 》
P10B13100BXS 《130 》
0.5
1.0
2,000
2,000
2.4
4.7
2.9
5.9
8.8
15.2
2.9
4.8
3.4
5.2
11.0
14.6
0.98
1.27
34.3
44.6
2.43
1.32
4.7
9.0
3.2 9.0 12.08X 10 -4 12.1X 10 -4
单位 kW min -1 min -1 N.m N.m N.m Arms Arms Arms N .m/Arms mV/min -1 Ω kW /S ms ms kg.m 2 (GD 2/4) kg.m 2 (GD 2/4) P/R Division kg N.m
V A kg.m 2 (GD 2/4) kg
例）［Ｐ６］（大容量方体型）伺服马达的额定功率选定为１１ｋＷ时，电源部分请选择１２ｋＷ。
PQM0
ＰＱＭ系列
PA
电源部分
电源的种类 Ａ：３相ＡＣ２００Ｖ用 Ｂ：单相ＡＣ２００Ｖ用 Ｃ：３相ＡＣ４００Ｖ用
120
00
规格识别 ００－标准规格
电源部分的容量 ２００Ｖ型 ４００Ｖ型 ７Ｒ８：７．８ｋＷ ７５０：７５ｋＷ １２０：１２ｋＷ １６０：１６ｋＷ ２７０：２７ｋＷ ３７０：３７ｋＷ
PY0 A 300 A 0 PW 1 P K0
＂ＰＹ＂系列 表示伺服驱动器
电压 Ａ：ＡＣ２００Ｖ
驱动器容量 ３００：３００Ａ
硬件种类 Ａ：省配线增量式编码器（ＩＮＣ－Ｅ） 或不带请求信号的绝对值编码器（ＡＢＳ－Ｅ） Ｈ：带请求信号的绝对值编码器（ＡＢＳ－ＲＩ ）Ｉ
siemens motor 西门子伺服电机样本
G_D211_EN_00172
0
nrated rpm nmax Inv nmax mech
速度 - 转矩特性
优点
1FK7 紧凑型同步电机 • 功率密度高、节省安装空间。 • 用途广泛。 • 型号齐全。
1FK7 高动态同步电机 • 极低的转子惯量，极高的动态响应。
1FK7 大惯量同步电机 • 极高的运行平稳性，适合大惯量负载应用
7.1 10.0 9.0 3.45 5.3 7.6 7.0 5.7 3.3 3.9 6.2 7.0 1.6 3.5
6.7 3.7 4.0 6.8 6.5 2.5
堵转 电流
I0 A
1.6 3.15 3.0 5.3 5.0 7.5 8.5 8.4 12.3 14.4 20.0 2.2 4.45 5.3 8.0 4.9 8.7 10.1 12.1 11.1 18.8 26.0 31.0 6.3 8.0 12.0 7.4 13.1 15.0 1.5 1.5 1.8 1.7 1.9 2.35 4.4
12.0 22.0 28.0 4.5 6.4 12.0 22.0 28.0 3.5 4.5 6.4 12.0 1.3 3.5
20.0 6.0 8.5 12.0 20.0 3.0
额定 电流
I rated A
1.55 2.95 2.65 4.4 4.4 6.3 6.7 7.1 9.7 11.0 16.0 2.0 3.7 4.0 5.6 4.4 6.8 7.2 6.5 8.0 11.6 11.5 18.0 4.3 3.3 3.8 4.8 4.9 3.6 0.85 0.85 1.4 1.3 1.3 1.85 2.5
47
1FW 力矩电机
西门子运动控制伺服电机概览
伺服电机样本资料
伺服电机样本资料1. IntroductionServo motors are electrical motors that drive the motion of a machine with precise accuracy. A servomotor is designed for accurate motion control by using feedback loops to adjust its position in response to an external signal. Servomotors are widely used in a range of industries, from robotics and imaging to factory automation and medical applications.Servomotors are available in a variety of sizes and shapes, from the smallest hobby motors to high-power, large-scale industrial models. The type of servomotor needed for a given application depends on the desired motion, the accuracy and speed required, and the amount of torque needed to move the load.2. Types of Servo MotorsDC Servo Motors: DC servo motors are the most popular typeof servomotor. They are typically used in applications that require high speed and low-to-medium torque. DC servomotors are driven by direct current (DC) motors and are typically used in applications that require position or speed control.AC Servo Motors: AC servo motors are the second most popular type of servomotor. They are typically used in applications that require high torque and low speed. AC servomotors are driven byalternating current (AC) motors and are typically used in applications that require loading and unloading force control.Stepper Motors: Stepper motors are the third most popular type of servomotor. They are typically used in applications that require accurate, high-torque motion. Stepper motors are driven by electric pulses, which cause the motor to rotate in a seriesof steps. This type of motor is typically used in applications that require precise positioning and speed control.3. Advantages and Disadvantages of Servo MotorsServomotors offer several advantages over traditional motors, including precise motion control, high power density, low noise operation, and wide speed range. Additionally, servomotors are typically smaller, lighter, and more efficient than traditional motors, making them ideal for applications that require low weight and high performance.However, servomotors also have some limitations. They can be expensive, and require precision control systems to achieve optimum performance. Additionally, servomotors are typically not suited for applications that require high power or speed.4. Applications of Servo MotorsIn machine tooling applications, servomotors are used todrive the precise motion of cutting tools, such as drills and lathes. In robotics applications, servomotors are used to powerrobotic arms and legs. In imaging systems, servomotors are used to control the position and movement of imaging equipment. In factory automation applications, servomotors are used to rapidly move large loads in precise, repeatable motions. In medical applications, servomotors are used to control the movement of medical devices, such as endoscopes and surgical instruments.5. ConclusionServo motors are a type of electrical motor designed for precise, accurate motion control. There are three primary types of servomotors: DC, AC, and stepper motors. Each type of servomotor offers its own advantages and disadvantages, depending on the application. Servomotors are widely used in machine tooling, robotics, imaging systems, factory automation, and medical applications.。
安川耐环境型电机样本
耐环境型AC伺服驱动伺服电机(耐环境型SGMJV-□D□型伺服单元(耐环境型SGDV-□002000型(普通型SGDV-□000000型1SGMJV 741+253SGMJV- 01 A D D 6S 765431+26*:与本公司以往带油封产品不同,同时适用于通常环境和油污环境。
2*1:–SGDV 100˚C 20˚C *2:40˚C SG JV -01A : 200×200×6mm SG JV -02A -04A -08A : 250×250×6mm–Å::min -1min -1min -1min -1N·m N·m N·m N·m 40003000200010000500060004000300020001000050006000400030002000100050006000400030002000100050006000::V15:DC500V 10M Ω:040˚C:::B :AC1500V 1:IP65:2080%::CCW 保持且各值为TYP.值。
(注 1 反复使用区域的特性会因电源电压而变动。
实线表示三相200V 、单相230V 输入时的特性;虚线表示单相200V 输入时的特性。
2 若有效转矩在额定转矩以内,则可在反复使用区域内使用。
3 对于超过20m 的伺服电机主回路电缆,其电压降会增大,反复使用区域会变窄,敬请注意。
3100% -12 3 DC24V40˚Cs %1000010001001010520510010 53003002J LJ M 530AC SigmaJunmaSize + http ://www.e / A.400A.320····P .339400WWlj -V ㋏㓐ḋ˄KACPS80000042˅NJ(1100W(不带制动器注1.要求油封功能时,请按照下述条件使用。
昆明电机厂YJZ系列交流伺服主轴电动机样本
1）：H，M，L 分别代表 2000，1500，1000 的基本速度，M 常省略 2）：S 短，M 中，L 长，1，2 第一、二种规格 3）：电机光轴输出时需在型号后加注“光轴”，表示轴伸无键槽。
功率范围
4 极 3.7~30kW
技术参数
电机的输出特性如上图所示，图中的具体数据如下页表。
6
型号 YJZ
功率
P1
P2
P0 P1 时的电流（A） P2 时的电流（A）
kW
3.7
3.7 5.5 2.8 12
17
5.5
5.5 7.5 3.3 16.5
23
7.5
7.5 11
5.4 22
31
9
9
12
6.5 27
37
11
11
15
11
32
45
15
15
18.5 15
43
58
18.5
18.5 22
15
54
65
22
22
30
海拔高度 m
1000
输出功率占额定功率的%
100
50 55 92 87
2000 94
60 65 82 77
3000 86
70 75 72 67
4000 77
4
振动：电动机振动速度有效值不超过表 1 所列数值(轴伸带有半键测量)
机座号 100~132
160
表 1 空载时的振动值
转速
(rpm) ≤1800 ≤3600 ≤4800 ≤6600 ≤8000 ≤1800 ≤3600 ≤4500 ≤6200 ≤7000
2
机外形美观，内部通风的风路合理，冷却效果好，符合国际主流的外形设计，用高性能 铝合金挤压成型使电机具有较高的强度和较小的体积和重量。
MR-E 三菱伺服样本
15.9
24
62
152
93
—
310
—
—
456
930
—
—
760
11.9
17.8
14.0
20.0
伺服电机转动惯量的15倍以下(注4)
增量型编码器（伺服电机每转的分辨率:131,072p/rev）
—
全封闭自冷式(保护方式IP67)(注5)
0~40℃(无冰冻) 保存温度:-15~70℃(无冰冻)
80%RH以下(无结露) 保存湿度:90%RH(无结露)
带电磁制动器
6.7
7.6
10
17
注: 1. 电源设备的功率因电源阻抗而变。
2. 再生制动器频度表示在空载和无再生制动选件情况下单体电机由额定转速起减速停止时的允许频度。但是，在带有负载时是表中数值的1/(m+1)(m=负载转动惯量/电机转动惯量)。另外，
如果超过额定转速，则再生制动器频度与(运转速度/额定速度)的平方成反比。如果转速频繁变动，例如，上下进给动作时处于长时间再生状态那样的情况下，要求出运转时的再生发热量(W)，
伺服电机HF-KN□-S100系列的转矩特性
HF-KN13(B)J-S100(注1,2)
140
1.0
短时间运转区域
105
0.75
HF-KN23(B)J-S100(注1,2)
280
2.0
短时间运转区域
210
1.5
HF-KN43(B)J-S100(注1,2)
560
4.0
短时间运转区域
420
3.0
转矩 (oz·in) 转矩(N·m)
4. 实际转矩如果在额定范围内，则再生频度无限制值。但是，推荐负载转动惯量比为15倍以下。 5. 负载转动惯量比如果超过表中的值，请向我公司咨询。
FANUCβi伺服电机样本
iSVSP iSV
iSVSP means “SerVo” and “SP” means “SPindle”. iSV means “SerVo”.
2
High cost-performance AC SERVO MOTOR with performance enough for feed axis of machine tools
Smooth rotation and compact size Optimized magnetic pole structure and mechanical design makes smooth rotation of feed axis and compact size with shorter axial length. Quick acceleration High torque and quick acceleration for this small-size light-weight by original rotor shape. IP65 High environmental resistance Protection level IP65
Cs
i i Position coder
SERVO AMPLIFIER with high cost performance suitable for basic and additional axis of machine tools
Integrated with power supply Integration of power supply contributes to easy extension of additional axes. 2-axes type are prepared adding to 1-axes type. Enough control performance By combination with latest digital servo technology, enough performance is achieved for basic and additional axis of machine tools. Smart maintenance Smart maintenance can be performed by Amplifier ID information, and connector of power cable for servo motor. 4
拉法特伺服电机样本-400Vac
电梯系列，同步无齿轮机器，用于无机房电梯。
4 一般信息 - 技术目录 10-129/16
产品系列
伺服电机和驱动器
高精度，强定制
在本系列产品中，拉法特将制造永磁电机方面的专业经验与公司长期追求非标准解决方 案的出色成绩和能力结合起来。通过长期研发（经常与客户合作），不断达到更出色的性 能，其中包括速度、精度、和控制能力，从而满足应用需求。
异步电机，超高能效三相电机 IE3，以及高能效
IE2 电机，通过定制满足应用需求和设备制造商 的 要求。
制动电机，异步电机，直流和交流制动器，面向
重型应用领域。
高性能系列，永磁同步电机和驱动器，极高能
效 – IE4/IE5，IPM 和 SMPM 技术，面向暖通 空 调应用。
伺服电机和驱动器，用于工业自动化的无刷伺
10 一般信息 - 技术目录 10-129/16
标准与规范
此外，所有伺服电机的制造都遵循了以下标准： UL1004 - 电动机以及 CSA C22.2100 号 - 电动机和发电机 所以，cURus 标志适用于整个 产品系列。
爆炸环境指令（ATEX）94/9/EC 针对要用于潜在爆炸环境的设备和保护系统，符合标准
机械
电气
标准与规范
拉法特电机符合相关的标准和规范，如下表所示：
电机的一般规定 旋转电机的终端标志和旋转方向 高效节能电机（包括变速应用）的应用指南 电气绝缘的热性能评定和分级-绝缘材料
IM B3 旋转电机的尺寸和输出功率 IM B5 旋转电机的尺寸和输出功率 电机的圆柱形轴端 防护等级分类（IP 代码） 冷却方法 安装方式– IM 代码 机械振动 - 振动的测量、评估和限制 公差 底座和轴伸的公差标准 DIN42955 环境条件的分类 机械振动与冲击（平衡）