燕秀快捷键自定义,图片,文字演示-37页文档资料
燕秀快捷键
燕秀工具箱快捷键：智能中心线-------------------------ce 画剖面线---------------------------se动态拉长---------------------------sx 设定标注字高---------------------------ff直线两端延长-----------------------yt 自动调整线型比例-------------------QW快速标注<加强>---------------------dq 线性标注(1)<加强>------------------da线性标注(2)<加强>------------------de 对齐标注(1)<加强>------------------dx直径标注<加强>---------------------dd 角度标注<加强>---------------------dv智能标注---------------------------q 词库-------------------------------n以直线镜像-------------------------mi 新建全部---------------------------qq对象快速过滤-----------------------ew 连接线段-----------------------------k中心标记-----------------------------WQ尺寸驱动----------------------------qd修改标注文字高度--------------------as 快速引线标注--------------------SA双边偏移--------------------------------qe 标注刷子-----------------------ad零件库--------------------------------ds三、自动图框命令使用说明：A1=散件A1横向图框A2=散件A2横向图框A3=散件A3横向图框A4=散件A4横向图框AA1=散件A1竖向图框AA2=散件A2竖向图框AA3=散件A3竖向图框AA4=散件A4竖向图框CA2=产品A2横向图框CA3=产品A3横向图框CA4=产品A4横向图框ZA1=组立A1横向图框ZA2=组立A2横向图框ZA3=组立A3横向图框要简化燕秀工具箱的命令名(例如：将et 代替yx_et 来启动“顶针”命令)请将(et, *yx_et)不含括号添加到AutoCAD的ACAD.PGP文件中(用yx_editpgp命令可打开ACAD.PGP)，详情请看yanxiu.pgp文件内说明或AutoCAD的帮助命令参考---------------------------yx_mlck*选项-------------------------------yx_zdy*新建全部---------------------------yx_newall新建图层---------------------------yx_lay_newall新建文字样式-----------------------yx_newstyle新建标注样式-----------------------yx_newdimsty设置当前线型为公制-----------------yx_stmCAD中毒修复------------------------yx_bdxf打开燕秀工具箱目录-----------------yx_yxml*隐藏对象---------------------------yx_hide取消全部隐藏-----------------------yx_show隐藏同名块-------------------------yx_sb隐藏对象到A组----------------------yx_hidea取消A组隐藏------------------------yx_showa隐藏对象到B组----------------------yx_hideb取消B组隐藏------------------------yx_showb*浏览图层---------------------------yx_bl关闭选取图层-----------------------yx_lay_offsel关闭选取外图层---------------------yx_lay_offselo反向关闭图层-----------------------yx_lay_offp打开全部图层-----------------------yx_lay_allon锁定选取图层-----------------------yx_lay_locksel锁定选取外图层---------------------yx_lay_locksell反向锁定图层-----------------------yx_lay_lockp解锁选取图层-----------------------yx_lay_unlocksel解锁全部图层-----------------------yx_lay_allunlock冻结选取图层-----------------------yx_lay_Freezesel冻结选取外图层---------------------yx_lay_Freezeself反向冻结图层-----------------------yx_lay_Freezep解冻全部图层-----------------------yx_lay_allthaw解冻,解锁,打开全部图层-------------yx_lay_alltuo将所有标注改变为dim层--------------yx_lay_dimall将所有标注改变为dim_temp层---------yx_lay_dimtmpall *将对象的图层置为当前---------------yx_ai_molc设置当前图层为center层-------------yx_lay_set_center设置当前图层为cool层---------------yx_lay_set_cool设置当前图层为core层---------------yx_lay_set_core设置当前图层为dim层----------------yx_lay_set_dim设置当前图层为dim_temp层-----------yx_lay_set_dim_temp 设置当前图层为epin层---------------yx_lay_set_epin设置当前图层为fromat层-------------yx_lay_set_fromat设置当前图层为hatch层--------------yx_lay_set_hatch设置当前图层为insert层-------------yx_lay_set_insert设置当前图层为life层---------------yx_lay_set_life设置当前图层为moldbase层-----------yx_lay_set_moldbase 设置当前图层为part层---------------yx_lay_set_part设置当前图层为runner层-------------yx_lay_set_runner设置当前图层为screw层--------------yx_lay_set_screw设置当前图层为slide层--------------yx_lay_set_slide设置当前图层为sp层-----------------yx_lay_set_sp设置当前图层为spring层-------------yx_lay_set_spring设置当前图层为std层----------------yx_lay_set_std设置当前图层为temp层---------------yx_lay_set_temp设置当前图层为text层---------------yx_lay_set_text*智能中心线-------------------------yx_cen删除重复线-------------------------yx_scf自动调整线型比例-------------------yx_axs画剖面线---------------------------yx_sec画截断线---------------------------yx_sx画折断线---------------------------yx_kl画圆柱断面线-----------------------yx_hl画线修剪---------------------------yx_tt直线修剪---------------------------yx_ty连接线段---------------------------yx_ff智能连接---------------------------yx_fd检查线段是否断开-------------------yx_chl样条曲线转圆弧(标注用)-------------yx_as样条曲线转圆弧(线割用)-------------yx_sl直样条曲线转直线(UG图)-------------yx_zs 双边偏移---------------------------yx_ou动态拉长---------------------------yx_yl合并线段---------------------------yx_lm直线两端延长-----------------------yx_yt样条曲线去除相切-------------------yx_sts计算多线条的总长度-----------------yx_ln等分线条---------------------------yx_dfx重复打断于点-----------------------yx_break 直线交点打断-----------------------yx_ol水平构造线-------------------------yx_hh垂直构造线-------------------------yx_vv直线转构造线-----------------------yx_xc*圆弧转圆---------------------------yx_ac圆坐标列表-------------------------yx_cty圆数量统计-------------------------yx_ctu批量修改圆,圆弧半径----------------yx_edr *编辑块-----------------------------yx_eb替换块-----------------------------yx_bg块旋转还原-------------------------yx_bf统计块的数量-----------------------yx_bs块坐标值零数转整数-----------------yx_ec统一块内对象图层-------------------yx_baa 统一块内对象颜色-------------------yx_bac 复制块内图元-----------------------yx_bc分解含属性的块保持属性值-----------yx_ebt 修改图块名-------------------------yx_bre建立匿名块-------------------------yx_nb匿名块转有名块---------------------yx_bun有名块转匿名块---------------------yx_bnu分解所有组-------------------------yx_eg分解所有匿名组---------------------yx_eug*旋转+1度---------------------------yx_e1旋转-1度---------------------------yx_r1旋转+2度---------------------------yx_e2旋转-2度---------------------------yx_r2旋转+3度---------------------------yx_e3旋转-3度---------------------------yx_r3旋转+45度--------------------------yx_e45旋转-45度--------------------------yx_r45旋转+90度--------------------------yx_e4旋转-90度--------------------------yx_r4旋转+180度-------------------------yx_r5*旋转复制---------------------------yx_cr旋转复制+1度-----------------------yx_ce1 旋转复制-1度-----------------------yx_cr1旋转复制+2度-----------------------yx_ce2 旋转复制-2度-----------------------yx_cr2旋转复制+3度-----------------------yx_ce3 旋转复制-3度-----------------------yx_cr3旋转复制+45度----------------------yx_ce45 旋转复制-45度----------------------yx_cr45 旋转复制+90度----------------------yx_ce4 旋转复制-90度----------------------yx_cr4 旋转复制+180度---------------------yx_cr5 *改变对象颜色-----------------------yx_cv改变对象颜色为1--------------------yx_c1 改变对象颜色为2--------------------yx_c2 改变对象颜色为3--------------------yx_c3 改变对象颜色为4--------------------yx_c4 改变对象颜色为5--------------------yx_c5 改变对象颜色为6--------------------yx_c6 改变对象颜色为7--------------------yx_c7改变对象颜色为8--------------------yx_c8改变对象颜色为9--------------------yx_c9将对象属性改为该层默认值-----------yx_bylayerobj *改变对象线型比例因子---------------yx_xs改变对象线型为Continuous-----------yx_x1改变对象线型为CENTER---------------yx_x2改变对象线型为HIDDEN---------------yx_x3改变对象线型为DASHED---------------yx_x4改变对象线型为PHANTOM--------------yx_x5改变颜色+线型+线型比例1------------yx_a1改变颜色+线型+线型比例2------------yx_a2改变颜色+线型+线型比例3------------yx_a3改变颜色+线型+线型比例4------------yx_a4改变颜色+线型+线型比例5------------yx_a5*快速旋转---------------------------yx_roo快速旋转复制-----------------------yx_crr保存视图---------------------------yx_vs对象快速过滤-----------------------yx_ew对象匹配过滤-----------------------yx_eq标记选取记号-----------------------yx_bj选取标记后的对象-------------------yx_bx以直线镜像-------------------------yx_ml4分之1镜像-------------------------yx_4mi4分之1旋转复制---------------------yx_4rc画箭头-----------------------------yx_jtZ轴归零----------------------------yx_zg局部对象重生-----------------------yx_regss未知角度转正-----------------------yx_rh相同比例重复缩放-------------------yx_ss相同角度重复旋转-------------------yx_rr相同距离重复移动-------------------yx_mm相同距离重复复制-------------------yx_cc清理全部垃圾-----------------------yx_pu删除垃圾文件-----------------------yx_lj缩放范围清理保存-------------------yx_fs缩放范围清理保存退出---------------yx_fcc *词库-------------------------------yx_ck连续命名---------------------------yx_mj修改文字高度-----------------------yx_th文字分解<变成线>-------------------yx_txtexp *重量计算---------------------------yx_cm斜顶角度计算-----------------------yx_ca承板厚度计算-----------------------yx_cs三板模导柱变形量计算---------------yx_cg *BOM--------------------------------yx_bm球标编号---------------------------yx_qb定料尺寸---------------------------yx_dt小标题-----------------------------yx_cj修改版次---------------------------yx_ve局部放大---------------------------yx_jbfd组立图3D输出-----------------------yx_asmout 输入图元自动分层-------------------yx_fc顶针过滤---------------------------yx_ewe顶针数量统计-----------------------yx_etu顶针坐标列表-----------------------yx_ety顶针孔输出清理---------------------yx_exe模仁角避空-------------------------yx_mk*塑料资料---------------------------yx_pi模具钢材资料-----------------------yx_pm AutoCAD使用技巧--------------------yx_pc注塑不良解決方法-------------------yx_pe塑胶模具经典结构-------------------yx_pg塑胶模具设计注意事项---------------yx_py *零件库-----------------------------yx_k模胚-------------------------------yx_mb水路-------------------------------yx_cl顶针-------------------------------yx_et弹簧-------------------------------yx_tf内六角螺丝-------------------------yx_sw定位环/唧咀------------------------yx_sprue 热流道-----------------------------yx_hs支撑柱-----------------------------yx_sp斜导柱-----------------------------yx_ag垃圾钉-----------------------------yx_lp限位块-----------------------------yx_xw中托司-----------------------------yx_egp直齿轮-----------------------------yx_ge穿丝孔-----------------------------yx_es其他螺丝---------------------------yx_sw2三板模相关-------------------------yx_sbm*快速标注<加强>---------------------yx_dq线性标注(1)<加强>------------------yx_d线性标注(2)<加强>------------------yx_de对齐标注(1)<加强>------------------yx_dx对齐标注(2)<加强>------------------yx_dw坐标标注<加强>---------------------yx_da半径标注<加强>---------------------yx_ddr直径标注<加强>---------------------yx_dd角度标注<加强>---------------------yx_dv连续标注<加强>---------------------yx_dc基线标注<加强>---------------------yx_db快速引线标注<加强>-----------------yx_q*计算打印区域标注文字高度-----------yx_aq设定放大图原点---------------------yx_uyf设置当前标注文字高度---------------yx_sh智能标注---------------------------yx_n坐标标注+连续标注------------------yx_df表面粗糙度标注---------------------yx_ccd批量坐标标注-----------------------yx_ds坐标标注(单点)---------------------yx_dh引线坐标标注-----------------------yx_daq线性直径标注-----------------------yx_dde对齐直径标注-----------------------yx_ddw批量直径标注+半径标注--------------yx_dda直径标注+半径标注(可加文字)--------yx_dr*标注刷子---------------------------yx_ad标注删除---------------------------yx_eed修改标注文字高度-------------------yx_dth修改坐标标注原点-------------------yx_uyu修改引线坐标标注原点---------------yx_uyq修改标注精度-----------------------yx_dup修改角度标注精度-------------------yx_daup修改标注是否消零-------------------yx_dtz修改标注比例因子-------------------yx_dsc修改标注文字颜色-------------------yx_dtc修改尺寸线颜色---------------------yx_dcc修改尺寸界线颜色-------------------yx_dec添加公差---------------------------yx_dg添加标注文字边框-------------------yx_dtk翻转标注文字方向-------------------yx_dfz坐标标注尺寸界线变直---------------yx_daf坐标标注文字重叠整理---------------yx_daz线性标注文字重叠整理---------------yx_ddz将所有标注设置为当前标注样式-------yx_sdta *检查坐标标注定义点是否正确---------yx_cda 检查标注点上是否有对象-------------yx_cdd 检查全部标注是否有公差-------------yx_cdt 检查标注测量值是否被修改-----------yx_cde 检查全部标注的比例因子-------------yx_cds *标注文字还原-----------------------yx_dty文字前加数量-----------------------yx_dn文字前加螺丝数量-------------------yx_dm文字后加拔模斜度<单边>-------------yx_ds1 文字后加拔模斜度<双边>-------------yx_ds2 *文字前加%%c------------------------yx_d1文字后加%%d------------------------yx_d2文字前加M--------------------------yx_d3文字后加(ref)----------------------yx_d4文字前加%%p------------------------yx_d5文字前后加()-----------------------yx_d6文字前后加<>-----------------------yx_d7文字后加X45%%D---------------------yx_d8文字后加(NODRAFT)------------------yx_d9 *添加文字(自定义1)------------------yx_at1添加文字(自定义2)------------------yx_at2添加文字(自定义3)------------------yx_at3*文字后加(镶针)---------------------yx_da1文字后加(司筒)---------------------yx_da2文字后加(穿丝孔)-------------------yx_da3文字后加(盲孔)---------------------yx_da4文字后加(通孔)---------------------yx_da5文字后加(全周)---------------------yx_da6文字后加(直身)---------------------yx_da7文字后加(无斜度)-------------------yx_da8*创建幻灯文件(改零件库用)-----------yx_newsld DWG文件列表(改零件库用)------------yx_filelst *燕秀模具技术论坛-------------------yx_yxlt燕秀工具帮助-----------------------yx_help关于燕秀工具箱---------------------yx_about命令参考---------------------------yx_mlck*选项-------------------------------yx_zdy*新建全部---------------------------yx_newall新建图层---------------------------yx_lay_newall 新建文字样式-----------------------yx_newstyle新建标注样式-----------------------yx_newdimsty 设置当前线型为公制-----------------yx_stm CAD中毒修复------------------------yx_bdxf打开燕秀工具箱目录-----------------yx_yxml*隐藏对象---------------------------yx_hide取消全部隐藏-----------------------yx_show隐藏同名块-------------------------yx_sb隐藏对象到A组----------------------yx_hidea取消A组隐藏------------------------yx_showa隐藏对象到B组----------------------yx_hideb取消B组隐藏------------------------yx_showb*浏览图层---------------------------yx_bl关闭选取图层-----------------------yx_lay_offsel 关闭选取外图层---------------------yx_lay_offselo 反向关闭图层-----------------------yx_lay_offp打开全部图层-----------------------yx_lay_allon锁定选取图层-----------------------yx_lay_locksel锁定选取外图层---------------------yx_lay_locksell反向锁定图层-----------------------yx_lay_lockp解锁选取图层-----------------------yx_lay_unlocksel解锁全部图层-----------------------yx_lay_allunlock冻结选取图层-----------------------yx_lay_Freezesel冻结选取外图层---------------------yx_lay_Freezeself反向冻结图层-----------------------yx_lay_Freezep解冻全部图层-----------------------yx_lay_allthaw解冻,解锁,打开全部图层-------------yx_lay_alltuo将所有标注改变为dim层--------------yx_lay_dimall将所有标注改变为dim_temp层---------yx_lay_dimtmpall*将对象的图层置为当前---------------yx_ai_molc设置当前图层为center层-------------yx_lay_set_center设置当前图层为cool层---------------yx_lay_set_cool设置当前图层为core层---------------yx_lay_set_core设置当前图层为dim层----------------yx_lay_set_dim设置当前图层为dim_temp层-----------yx_lay_set_dim_temp 设置当前图层为epin层---------------yx_lay_set_epin设置当前图层为fromat层-------------yx_lay_set_fromat设置当前图层为hatch层--------------yx_lay_set_hatch设置当前图层为insert层-------------yx_lay_set_insert设置当前图层为life层---------------yx_lay_set_life设置当前图层为moldbase层-----------yx_lay_set_moldbase 设置当前图层为part层---------------yx_lay_set_part设置当前图层为runner层-------------yx_lay_set_runner设置当前图层为screw层--------------yx_lay_set_screw设置当前图层为slide层--------------yx_lay_set_slide设置当前图层为sp层-----------------yx_lay_set_sp设置当前图层为spring层-------------yx_lay_set_spring设置当前图层为std层----------------yx_lay_set_std设置当前图层为temp层---------------yx_lay_set_temp设置当前图层为text层---------------yx_lay_set_text*删除重复线-------------------------yx_scf自动调整线型比例-------------------yx_axs 画剖面线---------------------------yx_sec画截断线---------------------------yx_sx画折断线---------------------------yx_kl画圆柱断面线-----------------------yx_hl画线修剪---------------------------yx_tt直线修剪---------------------------yx_ty连接线段---------------------------yx_ff智能连接---------------------------yx_fd检查线段是否断开-------------------yx_chl 样条曲线转圆弧(标注用)-------------yx_as 样条曲线转圆弧(线割用)-------------yx_sl 直样条曲线转直线(UG图)-------------yx_zs 双边偏移---------------------------yx_ou动态拉长---------------------------yx_yl合并线段---------------------------yx_lm直线两端延长-----------------------yx_yt样条曲线去除相切-------------------yx_sts 计算多线条的总长度-----------------yx_ln 等分线条---------------------------yx_dfx重复打断于点-----------------------yx_break 直线交点打断-----------------------yx_ol水平构造线-------------------------yx_hh垂直构造线-------------------------yx_vv直线转构造线-----------------------yx_xc*圆弧转圆---------------------------yx_ac圆坐标列表-------------------------yx_cty圆数量统计-------------------------yx_ctu批量修改圆,圆弧半径----------------yx_edr *编辑块-----------------------------yx_eb块旋转还原-------------------------yx_bf统计块的数量-----------------------yx_bs块坐标值零数转整数-----------------yx_ec统一块内对象图层-------------------yx_baa 统一块内对象颜色-------------------yx_bac 复制块内图元-----------------------yx_bc分解含属性的块保持属性值-----------yx_ebt 修改图块名-------------------------yx_bre建立匿名块-------------------------yx_nb匿名块转有名块---------------------yx_bun有名块转匿名块---------------------yx_bnu分解所有组-------------------------yx_eg分解所有匿名组---------------------yx_eug*旋转+1度---------------------------yx_e1旋转-1度---------------------------yx_r1旋转+2度---------------------------yx_e2旋转-2度---------------------------yx_r2旋转+3度---------------------------yx_e3旋转-3度---------------------------yx_r3旋转+45度--------------------------yx_e45旋转-45度--------------------------yx_r45旋转+90度--------------------------yx_e4旋转-90度--------------------------yx_r4旋转+180度-------------------------yx_r5*旋转复制---------------------------yx_cr旋转复制+1度-----------------------yx_ce1旋转复制-1度-----------------------yx_cr1旋转复制+2度-----------------------yx_ce2旋转复制-2度-----------------------yx_cr2旋转复制+3度-----------------------yx_ce3旋转复制-3度-----------------------yx_cr3旋转复制+45度----------------------yx_ce45旋转复制-45度----------------------yx_cr45旋转复制+90度----------------------yx_ce4旋转复制-90度----------------------yx_cr4旋转复制+180度---------------------yx_cr5*改变对象颜色-----------------------yx_cv改变对象颜色为1--------------------yx_c1改变对象颜色为2--------------------yx_c2改变对象颜色为3--------------------yx_c3改变对象颜色为4--------------------yx_c4改变对象颜色为5--------------------yx_c5改变对象颜色为6--------------------yx_c6改变对象颜色为7--------------------yx_c7改变对象颜色为8--------------------yx_c8改变对象颜色为9--------------------yx_c9将对象属性改为该层默认值-----------yx_bylayerobj *改变对象线型比例因子---------------yx_xs改变对象线型为Continuous-----------yx_x1改变对象线型为CENTER---------------yx_x2改变对象线型为HIDDEN---------------yx_x3改变对象线型为DASHED---------------yx_x4改变对象线型为PHANTOM--------------yx_x5改变颜色+线型+线型比例1------------yx_a1改变颜色+线型+线型比例2------------yx_a2改变颜色+线型+线型比例3------------yx_a3改变颜色+线型+线型比例4------------yx_a4改变颜色+线型+线型比例5------------yx_a5*快速旋转---------------------------yx_roo快速旋转复制-----------------------yx_crr保存视图---------------------------yx_vs对象快速过滤-----------------------yx_ew标记选取记号-----------------------yx_bj选取标记后的对象-------------------yx_bx以直线镜像-------------------------yx_ml4分之1镜像-------------------------yx_4mi4分之1旋转复制---------------------yx_4rc画箭头-----------------------------yx_jtZ轴归零----------------------------yx_zg局部对象重生-----------------------yx_regss 未知角度转正-----------------------yx_rh相同比例重复缩放-------------------yx_ss相同角度重复旋转-------------------yx_rr相同距离重复移动-------------------yx_mm相同距离重复复制-------------------yx_cc清理全部垃圾-----------------------yx_pu删除垃圾文件-----------------------yx_lj缩放范围清理保存-------------------yx_fs缩放范围清理保存退出---------------yx_fcc *词库-------------------------------yx_ck连续命名---------------------------yx_mj修改文字高度-----------------------yx_th文字分解<变成线>-------------------yx_txtexp *重量计算---------------------------yx_cm斜顶角度计算-----------------------yx_ca承板厚度计算-----------------------yx_cs三板模导柱变形量计算---------------yx_cg *BOM--------------------------------yx_bm球标编号---------------------------yx_qb定料尺寸---------------------------yx_dt小标题-----------------------------yx_cj修改版次---------------------------yx_ve组立图3D输出-----------------------yx_asmout 输入图元自动分层-------------------yx_fc顶针过滤---------------------------yx_ewe顶针数量统计-----------------------yx_etu顶针坐标列表-----------------------yx_ety顶针孔输出清理---------------------yx_exe模仁角避空-------------------------yx_mk*塑料资料---------------------------yx_pi模具钢材资料-----------------------yx_pm AutoCAD使用技巧--------------------yx_pc注塑不良解決方法-------------------yx_pe塑胶模具经典结构-------------------yx_pg塑胶模具设计注意事项---------------yx_py *零件库-----------------------------yx_k模胚-------------------------------yx_mb水路-------------------------------yx_cl顶针-------------------------------yx_et弹簧-------------------------------yx_tf内六角螺丝-------------------------yx_sw定位环/唧咀------------------------yx_sprue热流道-----------------------------yx_hs支撑柱-----------------------------yx_sp斜导柱-----------------------------yx_ag垃圾钉-----------------------------yx_lp限位块-----------------------------yx_xw中托司-----------------------------yx_egp直齿轮-----------------------------yx_ge穿丝孔-----------------------------yx_es其他螺丝---------------------------yx_sw2三板模相关-------------------------yx_sbm*线性标注(1)<加强>------------------yx_d线性标注(2)<加强>------------------yx_de对齐标注(1)<加强>------------------yx_dx对齐标注(2)<加强>------------------yx_dw坐标标注<加强>---------------------yx_da半径标注<加强>---------------------yx_ddr直径标注<加强>---------------------yx_dd角度标注<加强>---------------------yx_dv连续标注<加强>---------------------yx_dc基线标注<加强>---------------------yx_db快速引线标注<加强>-----------------yx_q*计算打印区域标注文字高度-----------yx_aq 设置当前坐标原点-------------------yx_uy设定放大图原点---------------------yx_uyf设置当前标注文字高度---------------yx_sh 智能标注---------------------------yx_n坐标标注+连续标注------------------yx_df表面粗糙度标注---------------------yx_ccd批量坐标标注-----------------------yx_ds坐标标注(单点)---------------------yx_dh引线坐标标注-----------------------yx_daq线性直径标注-----------------------yx_dde对齐直径标注-----------------------yx_ddw批量直径标注+半径标注--------------yx_dda 直径标注+半径标注(可加文字)--------yx_dr *标注刷子---------------------------yx_ad标注删除---------------------------yx_eed修改标注文字高度-------------------yx_dth修改坐标标注原点-------------------yx_uyu 修改引线坐标标注原点---------------yx_uyq 修改标注精度-----------------------yx_dup修改标注是否消零-------------------yx_dtz修改标注比例因子-------------------yx_dsc修改标注文字颜色-------------------yx_dtc修改尺寸线颜色---------------------yx_dcc修改尺寸界线颜色-------------------yx_dec添加公差---------------------------yx_dg添加标注文字边框-------------------yx_dtk翻转标注文字方向-------------------yx_dfz坐标标注尺寸界线变直---------------yx_daf坐标标注文字重叠整理---------------yx_daz线性标注文字重叠整理---------------yx_ddz将所有标注设置为当前标注样式-------yx_sdta *检查坐标标注原点个数---------------yx_cuy检查坐标标注定义点是否正确---------yx_cda 检查标注点上是否有对象-------------yx_cdd检查全部标注是否有公差-------------yx_cdt检查标注测量值是否被修改-----------yx_cde 检查全部标注的比例因子-------------yx_cds*标注文字还原-----------------------yx_dty文字前加数量-----------------------yx_dn文字前加螺丝数量-------------------yx_dm文字后加拔模斜度<单边>-------------yx_ds1 文字后加拔模斜度<双边>-------------yx_ds2 *文字前加%%c------------------------yx_d1文字后加%%d------------------------yx_d2文字前加M--------------------------yx_d3文字后加(ref)----------------------yx_d4文字前加%%p------------------------yx_d5文字前后加()-----------------------yx_d6文字前后加<>-----------------------yx_d7文字后加X45%%D---------------------yx_d8文字后加(NODRAFT)------------------yx_d9*添加文字(自定义1)------------------yx_at1添加文字(自定义2)------------------yx_at2添加文字(自定义3)------------------yx_at3*文字后加(镶针)---------------------yx_da1文字后加(司筒)---------------------yx_da2文字后加(穿丝孔)-------------------yx_da3文字后加(盲孔)---------------------yx_da4文字后加(通孔)---------------------yx_da5文字后加(全周)---------------------yx_da6文字后加(直身)---------------------yx_da7文字后加(无斜度)-------------------yx_da8*创建幻灯文件(改零件库用)-----------yx_newsld DWG文件列表(改零件库用)------------yx_filelst *燕秀模具技术论坛-------------------yx_yxlt燕秀工具帮助-----------------------yx_help关于燕秀工具箱---------------------yx_about。
燕秀工具箱快捷键
新建全部NA 新建图层NL 新建文字样式NS 新建标注样式ND 设置当前线型为公制STM CAD中毒修复XF 打开燕秀工具箱目录YM *隐藏对象HY 取消全部隐藏HU 隐藏同名块HB 取消块隐藏UB 隐藏对象到A组H取消A组隐藏U6隐藏对象到B组H7取消B组隐藏U7*浏览图层BL关闭选取图层LO关闭选取外图层LOO 反向关闭图层LOP 打开全部图层LUO锁定选取图层LK锁定选取外图层LKK反向锁定图层LKP解锁选取图层LKU解锁全部图层LUL冻结选取图层LF冻结选取外图层LFF反向冻结图层LFP解冻全部图层LUF解冻,解锁,打开全部图层LUU将所有标注改变为dim层KDA 将所有标注改变为dim_temp层KDTA *将对象的图层置为当前AI设置当前图层为center层LC设置当前图层为cool层- LCO设置当前图层为core层LCR设置当前图层为dim层LD设置当前图层为dim_temp层LDT 设置当前图层为epin层LE设置当前图层为from层LFR设置当前图层为hatch层LH设置当前图层为insert层LI设置当前图层为lift层LA 设置当前图层为moldbase层LM 设置当前图层为part层LP 设置当前图层为runner层LR 设置当前图层为screw层LS 设置当前图层为slide层LSL 设置当前图层为sp层LSP 设置当前图层为spring层LST 设置当前图层为std层LSR 设置当前图层为temp层LTE 设置当前图层为text层LT *智能中心线CE 删除重复线SCF 自动调整线型比例AXS 整数直线LL 画剖面线SEC 画截断线SX 画折断线KL 画圆柱断面线HL 画线修剪TT直线修剪TY 连接线段FF 智能连接FD 检查线段是否断开CHL 样条曲线转圆弧(标注用) AS样条曲线转圆弧(线割用) SL直样条曲线转直线(UG图) ZS 双边偏移OU 动态拉长YT 合并线段LLM 直线两端延长YT 样条曲线去除相切STS 计算多线条的总长度- LN 等分线条- DFX 重复打断于点BN 水平构造线HH 垂直构造线VV 直线转构造线XC *圆弧转圆AC 圆数量统计CTU 圆坐标列表CTY圆坐标值零数转整数EC 批量修改圆,圆弧半径ER *编辑块EB 替换块EG 块旋转还原BF 统计块的数量- BS 修改块插入基点BI 块坐标值零数转整数EC 统一块内对象图层BAA 统一块内对象颜色BAC 复制块内图元BC 炸开无法分解的块EXB 分解含属性的块保持属性值EBT 修改图块名BRE 建立匿名块NB 匿名块转有名块- BUN 有名块转匿名块BNU 分解所有组EG 分解所有匿名组EUG *词库CK文字加框JK连续命名MJ 文字批量替换WT 修改文字高度TH文字分解<变成线> TE *旋转+1度E1旋转-1度R1旋转+2度E2旋转-2度- R2旋转+3度E3旋转-3度- R3旋转+45度E45旋转-45度R45旋转+90度E4 旋转-90度R4 旋转+180度R5 *复制旋转CR 复制旋转+1度CE1复制旋转-1度CR1复制旋转+2度复制旋转-2度复制旋转+3度复制旋转-3度复制旋转+45度CE45复制旋转-45度CR45复制旋转+90度CE4复制旋转-90度CR4复制旋转+180度CR5 *颜色备忘板CB 改变对象颜色CV 改变对象颜色为1 C1改变对象颜色为2 C2改变对象颜色为3改变对象颜色为4改变对象颜色为5改变对象颜色为6改变对象颜色为7改变对象颜色为8改变对象颜色为9将对象属性改为该层默认值KBL *改变对象线型比例因子XS改变对象线型为Continuous X1改变对象线型为CENTER X2改变对象线型为HIDDEN X3改变对象线型为DASHED X4改变对象线型为PHANTOM X5改变颜色+线型+线型比例1 A1改变颜色+线型+线型比例2 A2 改变颜色+线型+线型比例3改变颜色+线型+线型比例4改变颜色+线型+线型比例5 A5 *快速旋转ROO 快速复制旋转CRR 视图对齐VD保存视图VS对象快速过滤EW对象匹配过滤EQ标记选取记号BJ选取标记后的对象BX 以直线镜像ML 4分之1镜像4MI4分之1复制旋转4RC 画箭头JTZ轴归零ZG 局部对象重生REGSS 未知角度转正RH相同距离重复拉伸SS相同比例重复缩放SCC 相同角度重复旋转RR相同距离重复移动MM 相同距离重复复制CC清理全部垃圾PU删除垃圾文件LJ查找远距离对象ZYT 缩放范围清理保存FS缩放范围清理保存退出FCC *重量计算CM斜顶角度计算CA承板厚度计算CS三板模导柱变形量计算CG*BOM- BM球标编号QB检查零件干涉JG定料尺寸DT小标题-CJ修改版次VE局部放大JB组立图3D输出AU输入图元自动分层FC 顶针过滤EVE顶针数量统计ETU顶针坐标列表ET顶针孔输出清理EXE模仁角避空MK*塑料资料P I 模具钢材资料P MAutoCAD使用技巧PC注塑不良解決方法PE塑胶模具经典结构PG塑胶模具设计注意事项PT*零件库K模胚MB水路CL顶针ET弹簧TF内六角螺丝SW定位环/唧咀SR热流道HS支撑柱SP斜导柱AG垃圾钉LP限位块XW中托司EGP直齿轮GE穿丝孔ES其他螺丝SW2三板模相关SBM*快速标注<加强>DQ 线性标注(1)<加强>D 线性标注(2)<加强>DE 对齐标注(1)<加强>DX 对齐标注(2)<加强>DW坐标标注<加强>DA半径标注<加强>DDR直径标注<加强>DD角度标注<加强>DV连续标注<加强>DC基线标注<加强>DB快速引线标注<加强>Q*计算打印区域标注文字高度AQ 设置当前坐标原点UY设定放大图原点UYF设置当前标注文字高度SH智能标注N坐标标注+连续标注DF表面粗糙度标注CCD批量坐标标注DS坐标标注(单点) DH引线坐标标注DAQ线性直径标注DDE对齐直径标注DDW批量直径标注+半径标注DDA直径标注+半径标注(可加文字) DR尺寸驱动QD标注刷子AD标注删除EED修改标注文字高度yx_dth修改坐标标注原点DTH修改引线坐标标注原点UYU修改标注精度UYQ修改角度标注精度DUP修改标注是否消零DAUP修改标注比例因子DTZ修改标注文字颜色DSC修改尺寸线颜色DTC修改尺寸界线颜色DEC添加公差DG添加标注文字边框DTK翻转标注文字方向DFZ坐标标注尺寸界线变直DAF坐标标注文字重叠整理DAZ线性标注文字重叠整理DDZ解除标注的关联性DGL将所有标注设置为当前标注样式SDTA检查坐标标注原点个数CUY检查坐标标注定义点是否正确CDA 检查标注点上是否有对象CDD检查全部标注是否有公差CDT检查标注测量值是否被修改CDE 检查全部标注的比例因子CDS*标注文字还原DTY文字前加数量DN文字前加螺丝数量DM文字后加拔模斜度<单边>DS1文字后加拔模斜度<双边>DS2*文字前加%%cD1文字后加%%dD2文字前加MD3文字后加(ref) D4文字前加%%pD5文字前后加()D6文字前后加<>D7文字后加X45%%DD8文字后加(NODRAFT) D9 *添加文字(自定义1) AT1 添加文字(自定义2) AT2 添加文字(自定义3) AT3 *文字后加(镶针) DA1文字后加(司筒) DA2文字后加(穿丝孔) DA3 文字后加(盲孔) DA4文字后加(通孔) DA5文字后加(全周) DA6文字后加(直身) DA7文字后加(无斜度) DA8。
燕秀工具最全快捷键
燕秀工具最全快捷键MLCK, *YX_MLCK;环境设置NA, *YX_NEWALL 新建全部NL, *YX_LAY_NEWALL 新建常用图层NS, *YX_NEWSTYLE 新建常用文字样式ND, *YX_NEWDIMSTY 新建YanXiu标注样式STM, *YX_STM 设置当前线型为公制;隐藏工具HY, *YX_HIDE 隐藏对象HU, *YX_SHOW 取消全部隐藏H6, *YX_HIDEA 隐藏对象到A 组U6, *YX_SHOWA 取消A 组隐藏H7, *YX_HIDEB 隐藏对象到B 组U7, *YX_SHOWB 取消B 组隐藏;图层工具BL, *YX_BL 浏览图层LO, *YX_LAY_OFFSEL 关闭选取图层LOO, *YX_LAY_OFFSELO 关闭选取以外的图层LOP, *YX_LAY_OFFP 反向关闭图层LUO, *YX_LAY_ALLON 全部图层已打开LL, *YX_LAY_LOCKSEL 锁定选取图层LLL, *YX_LAY_LOCKSELL 锁定选取以外的图层LLP, *YX_LAY_LOCKP 反向锁定图层LLU, *YX_LAY_UNLOCKSEL 解锁选取图层LUL, *YX_LAY_ALLUNLOCK 全部图层已解锁LF, *YX_LAY_FREEZESEL 冻结选取图层LFF, *YX_LAY_FREEZESELF 冻结选取以外的图层LFP, *YX_LAY_FREEZEP 反向冻结图层LUF, *YX_LAY_ALLTHAW 全部图层已解冻LUU, *YX_LAY_ALLTUO 全部图层已解冻,解锁,打开KDA, *YX_LAY_DIMALL 将所有标注改变为dim层KDTA, *YX_LAY_DIMTMPALL;设置当前图层AI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER 中心线层LCO, *YX_LAY_SET_COOL 水路层LCR, *YX_LAY_SET_CORE 模仁层LD, *YX_LAY_SET_DIM 标注层LDT, *YX_LAY_SET_DIM_TEMP 临时标注层LE, *YX_LAY_SET_EPIN 顶针层LFR, *YX_LAY_SET_FROMAT 产品层LH, *YX_LAY_SET_HATCH 填充层LI, *YX_LAY_SET_INSERT 镶件层LA, *YX_LAY_SET_LIFE 斜顶层LM, *YX_LAY_SET_MOLDBASE 模胚层LP, *YX_LAY_SET_PART 产品层LR, *YX_LAY_SET_RUNNER 流道层LS, *YX_LAY_SET_SCREW 螺丝层LSL, *YX_LAY_SET_SLIDE 滑块层LSP, *YX_LAY_SET_SP 撑头层LST, *YX_LAY_SET_STD 标准件层LSR, *YX_LAY_SET_SPRING 弹弓层LTE, *YX_LAY_SET_TEMP 临时层LT, *YX_LAY_SET_TEXT 文字层;线工具CE, *YX_CEN 智能中心线AXS, *YX_AXS 自动调整线型比例SEC, *YX_SEC 画剖面线SX, *YX_SX 画截断线KL, *YX_KL 画截断线HL, *YX_HL 画截断线TT, *YX_TT 画线修剪TY, *YX_TY 直线修剪FF, *YX_FF 连接线段FD, *YX_FD 智能连接CHL, *YX_CHL 检查线段是否断开AS, *YX_AS 不规则圆弧修正SL, *YX_SL 样条曲线转圆弧(线割用) OU, *YX_OU 双边偏移YL, *YX_YL 动态拉长LLM, *YX_LM 合并线段YT, *YX_YT 直线两端延长STS, *YX_STS 样条曲线去除相切LN, *YX_LN 计算多线条的总长度DFX, *YX_DFX 等分线条BN, *YX_BREAK 重复打断于点OL, *YX_OL 直线交点打断HH, *YX_HH 垂直构造线VV, *YX_VV 水平构造线XC, *YX_XC 直线转构造线;圆工具AC, *YX_AC 圆弧转圆CTY, *YX_CTY 圆坐标列表CTU, *YX_CTU 圆数量统计ER, *YX_EDR 批量修改圆,圆弧半径;块工具EB, *YX_EB 编辑块BG, *YX_BG 替换块BF, *YX_BF 块旋转还原BS, *YX_BS 统计块的数量EC, *YX_EC 坐标值零数转整数(整理顶针) BC, *YX_BC 复制块内图元EBT, *YX_EBT 分解含属性的块保持属性值BRE, *YX_BRE 修改图块名NB, *YX_NB 建立匿名块BUN, *YX_BUN 匿名块转有名块BNU, *YX_BNU 有名块转匿名块EG, *YX_EG 分解所有组EUG, *YX_EUG 分解所有匿名组;旋转E1, *YX_E1 旋转+1 度R1, *YX_R1 旋转-1 度E2, *YX_E2 旋转+2 度R2, *YX_R2 旋转-2 度E3, *YX_E3 旋转+3 度R3, *YX_R3 旋转-3 度E45, *YX_E45 旋转+45 度R45, *YX_R45 旋转-45度E4, *YX_E4 旋转+90 度R4, *YX_R4 旋转-90 度R5, *YX_R5 旋转+180 度;旋转复制CR, *YX_CR 旋转复制CE1, *YX_CE1 旋转复制+1 度CR1, *YX_CR1 旋转复制-1 度CE2, *YX_CE2 旋转复制+2 度CR2, *YX_CR2 旋转复制-2 度CE3, *YX_CE3 旋转复制+3 度CR3, *YX_CR3 旋转复制-3 度CE45, *YX_CE45 旋转复制+45 度CR45, *YX_CR45 旋转复制-45度CE4, *YX_CE4 旋转复制+90 度CR4, *YX_CR4 旋转复制-90 度CR5, *YX_CR5 旋转复制+180 度;颜色工具CV, *YX_CV 改变对象颜色C1, *YX_C1 改变对象颜色为红色C2, *YX_C2 改变对象颜色为黄色C3, *YX_C3 改变对象颜色为绿色C4, *YX_C4 改变对象颜色为青色C5, *YX_C5 改变对象颜色为蓝色C6, *YX_C6 改变对象颜色为洋红C7, *YX_C7 改变对象颜色为白色C8, *YX_C8 改变对象颜色为灰色C9, *YX_C9 改变对象颜色为浅灰色KBL, *YX_BYLAYEROBJ 将对象属性改为该层默认值XS, *YX_XS 改变对象线型比例因子X1, *YX_X1 改变对象线型为ContinuousX2, *YX_X2 改变对象线型为CENTERX3, *YX_X3 改变对象线型为HIDDENX4, *YX_X4 改变对象线型为CENTERX5, *YX_X5 改变对象线型为PHANTOM A1, *YX_A1 改变线性+颜色+比例1A2, *YX_A2 改变线性+颜色+比例2A3, *YX_A3 改变线性+颜色+比例3A4, *YX_A4 改变线性+颜色+比例4A5, *YX_A5 改变线性+颜色+比例5;常用工具VS, *YX_VS 保存视图EW, *YX_EW 对象快速过滤EQ, *YX_EQ 对象匹配过滤ML, *YX_ML 以直线镜像4MI, *YX_4MI 4分之1镜像4RC, *YX_4RC 4分之1旋转复制JT, *YX_JT 画箭头REGSS, *YX_REGSS 局部对象重生RH, *YX_RH 未知角度转正SS, *YX_SS 相同比例重复缩放RR, *YX_RR 相同角度重复旋转MM, *YX_MM 相同距离重复移动CC, *YX_CC 相同距离重复复制PU, *YX_PU 清理全部垃圾LJ, *YX_LJ 删除垃圾文件FS, *YX_FS 清理保存FCC, *YX_FCC 清理保存退出;文字工具CK, *YX_CK 词库MJ, *YX_MJ 连续命名TH, *YX_TH 修改文字高度TE, *YX_TXTEXP 文字分解;计算工具CM, *YX_CM 重量计算CA, *YX_CA 斜顶角度计算CS, *YX_CS 承板厚度计算CG, *YX_CG 三板模导柱变形量计算;模具工具BM, *YX_BM BOMDT, *YX_DT 定料尺寸CJ, *YX_CJ 小标题VE, *YX_VE 修改版次JB, *YX_JBFD 局部放大AU, *YX_ASMOUT 组立图3D输出EWE, *YX_EWE 顶针过滤ETU, *YX_ETU 顶针数量统计ETY, *YX_ETY 顶针坐标列表EXE, *YX_EXE 顶针孔输出清理MK, *YX_MK 模仁角避空;模具资料PI, *YX_PI 塑料资料PM, *YX_PM 模具钢材资料PC, *YX_PC AutoCAD使用技巧PE, *YX_PE 注塑不良解決方法PG, *YX_PG 塑胶模具经典结构PY, *YX_PY 塑胶模具设计注意事项;模具标准件K, *YX_K 零件库MB, *YX_MB 模胚CL, *YX_CL 水路ET, *YX_ET 顶针TF, *YX_TF 弹簧SW, *YX_SW 内六角螺丝SR, *YX_SPRUE 定位环/唧咀HS, *YX_HS 热流道SP, *YX_SP 支撑柱AG, *YX_AG 斜导柱LP, *YX_LP 垃圾钉XW, *YX_XW 限位块EGP, *YX_EGP 顶针板导柱GE, *YX_GE 直齿轮ES, *YX_ES 穿丝孔SW2, *YX_SW2 其他螺丝SBM, *YX_SBM 三板模相关;标注加强工具DQ, *YX_DQ 快速标注D, *YX_D 线性标注DE, *YX_DE 线性标注(2)DX, *YX_DX 对齐标注(1)DW, *YX_DW 对齐标注(2)DA, *YX_DA 坐标标注DDR, *YX_DDR 半径标注DD, *YX_DD 直径标注DV, *YX_DV 角度标注DC, *YX_DC 连续标注DB, *YX_DB 基线标注Q, *YX_Q 快速引线标注;标注超强工具AQ, *YX_AQ 计算打印区域标注文字高度UY, *YX_UY 设置当前坐标原点SH, *YX_SH 设置当前标注文字高度N, *YX_N 智能标注DF, *YX_DF 坐标标注+连续标注CCD, *YX_CCD 表面粗糙度标注DS, *YX_DS 批量坐标标注DH, *YX_DH 坐标标注(单点)DAQ, *YX_DAQ 引线坐标标注DDE, *YX_DDE 线性直径标注DDW, *YX_DDW 对齐直径标注DDA, *YX_DDA 批量直径标注+半径标注DR, *YX_DR 直径标注+半径标注(可添加文字) ;标注修改工具AD, *YX_AD 标注刷子EED, *YX_EED 标注删除DTH, *YX_DTH 修改标注文字高度UYU, *YX_UYU 修改坐标标注原点UYQ, *YX_UYQ 修改引线坐标标注原点DUP, *YX_DUP 修改标注精度DAUP, *YX_DAUP 修改角度标注精度DTZ, *YX_DTZ 修改标注是否消零DSC, *YX_DSC 修改标注比例因子DTC, *YX_DTC 修改标注文字颜色DCC, *YX_DCC 修改尺寸线颜色DEC, *YX_DEC 修改尺寸界线颜色DG, *YX_DG 添加公差DTK, *YX_DTK 添加标注文字边框DFZ, *YX_DFZ 翻转标注文字方向DAF, *YX_DAF 坐标标注尺寸界线变直DAZ, *YX_DAZ 坐标标注文字重叠整理DDZ, *YX_DDZ 线性标注文字重叠整理SDTA, *YX_SDTA 所有标注已改变到当前标注样式;标注检查工具CUY, *YX_CUY 检查坐标标注原点个数CDA, *YX_CDA 检查坐标标注定义点是否正确CDT, *YX_CDT 检查全部标注是否有公差CDE, *YX_CDE 检查标注测量值是否被修改CDS, *YX_CDS 检查全部标注的比例因子;标注文字工具DTY, *YX_DTY 标注文字还原DN, *YX_DN 文字前加数量DM, *YX_DM 文字前加螺丝数量DS1, *YX_DS1 文字后加拔模斜度<单边>DS2, *YX_DS2 文字后加拔模斜度<双边>D1, *YX_D1 文字前加%%cD2, *YX_D2 文字后加%%dD3, *YX_D3 文字前加MD4, *YX_D4 文字后加(ref)D5, *YX_D5 文字前加%%pD6, *YX_D6 文字前后加()D7, *YX_D7 文字前后加<>D8, *YX_D8 文字后加X45%%DD9, *YX_D9 文字后加(NO DRAFT)DA1, *YX_DA1 文字后加(镶针)DA2, *YX_DA2 文字后加(司筒)DA3, *YX_DA3 文字后加(穿丝孔)DA4, *YX_DA4 文字后加(盲孔)DA5, *YX_DA5 文字后加(通孔)DA6, *YX_DA6 文字后加(全周)DA7, *YX_DA7 文字后加(直身)DA8, *YX_DA8 文字后加(无斜度);倒圆角F, *YX_F 倒圆角FT, *YX_FT 倒圆角<不剪切> F01, *YX_F01F02, *YX_F02F03, *YX_F03F05, *YX_F05F1, *YX_F1F2, *YX_F2F3, *YX_F3F4, *YX_F4F5, *YX_F5F6, *YX_F6F7, *YX_F7F8, *YX_F8F9, *YX_F9F10, *YX_F10F12, *YX_F12F20, *YX_F20F30, *YX_F30F50, *YX_F50;倒角G, *YX_G 倒角<剪切> GT, *YX_GT 倒角<不剪切> G01, *YX_G01G02, *YX_G02G03, *YX_G03G05, *YX_G05G1, *YX_G1G2, *YX_G2G3, *YX_G3G4, *YX_G4G5, *YX_G5G6, *YX_G6G7, *YX_G7G8, *YX_G8G9, *YX_G9G10, *YX_G10G12, *YX_G12G20, *YX_G20G30, *YX_G30G50, *YX_G50;延长Y, *YX_Y 延长Y01, *YX_Y01Y02, *YX_Y02Y03, *YX_Y03Y05, *YX_Y05Y1, *YX_Y1Y2, *YX_Y2Y3, *YX_Y3Y4, *YX_Y4Y5, *YX_Y5Y6, *YX_Y6Y7, *YX_Y7Y8, *YX_Y8Y9, *YX_Y9Y10, *YX_Y10Y12, *YX_Y12Y20, *YX_Y20Y30, *YX_Y30Y50, *YX_Y50;偏移OO, *YX_OO 偏移O01, *YX_O01O02, *YX_O02O03, *YX_O03O05, *YX_O05O1, *YX_O1O2, *YX_O2O3, *YX_O3O4, *YX_O4O5, *YX_O5O6, *YX_O6O7, *YX_O7O8, *YX_O8O9, *YX_O9O10, *YX_O10O12, *YX_O12O20, *YX_O20O30, *YX_O30O50, *YX_O50;CAD自带命令;C, *COPY;CD, *CIRCLE;WW, *MIRROR;AA, *MATCHPROP;QQ, *PLOT;CCA, *CLOSEALL。
燕秀工具快捷键
MLCK, *YX_MLCK;环境设置NA, *YX_NEWALL 新建全部NL, *YX_LAY_NEWALL 新建常用图层NS, *YX_NEWSTYLE 新建常用文字样式ND, *YX_NEWDIMSTY 新建YanXiu标注样式STM, *YX_STM 设置当前线型为公制;隐藏工具HY, *YX_HIDE 隐藏对象HU, *YX_SHOW 取消全部隐藏H6, *YX_HIDEA 隐藏对象到A 组U6, *YX_SHOWA 取消A 组隐藏H7, *YX_HIDEB 隐藏对象到B 组U7, *YX_SHOWB 取消B 组隐藏;图层工具BL, *YX_BL 浏览图层LO, *YX_LAY_OFFSEL 关闭选取图层LOO, *YX_LAY_OFFSELO 关闭选取以外的图层LOP, *YX_LAY_OFFP 反向关闭图层LUO, *YX_LAY_ALLON 全部图层已打开LL, *YX_LAY_LOCKSEL 锁定选取图层LLL, *YX_LAY_LOCKSELL 锁定选取以外的图层LLP, *YX_LAY_LOCKP 反向锁定图层LLU, *YX_LAY_UNLOCKSEL 解锁选取图层LUL, *YX_LAY_ALLUNLOCK 全部图层已解锁LF, *YX_LAY_FREEZESEL 冻结选取图层LFF, *YX_LAY_FREEZESELF 冻结选取以外的图层LFP, *YX_LAY_FREEZEP 反向冻结图层LUF, *YX_LAY_ALLTHAW 全部图层已解冻LUU, *YX_LAY_ALLTUO 全部图层已解冻,解锁,打开KDA, *YX_LAY_DIMALL 将所有标注改变为dim层KDTA, *YX_LAY_DIMTMPALL;设置当前图层AI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER 中心线层LCO, *YX_LAY_SET_COOL 水路层LCR, *YX_LAY_SET_CORE 模仁层LD, *YX_LAY_SET_DIM 标注层LDT, *YX_LAY_SET_DIM_TEMP 临时标注层LE, *YX_LAY_SET_EPIN 顶针层LFR, *YX_LAY_SET_FROMAT 产品层LH, *YX_LAY_SET_HATCH 填充层LI, *YX_LAY_SET_INSERT 镶件层LA, *YX_LAY_SET_LIFE 斜顶层LM, *YX_LAY_SET_MOLDBASE 模胚层LP, *YX_LAY_SET_PART 产品层LR, *YX_LAY_SET_RUNNER 流道层LS, *YX_LAY_SET_SCREW 螺丝层LSL, *YX_LAY_SET_SLIDE 滑块层LSP, *YX_LAY_SET_SP 撑头层LST, *YX_LAY_SET_STD 标准件层LSR, *YX_LAY_SET_SPRING 弹弓层LTE, *YX_LAY_SET_TEMP 临时层LT, *YX_LAY_SET_TEXT 文字层;线工具CE, *YX_CEN 智能中心线AXS, *YX_AXS 自动调整线型比例SEC, *YX_SEC 画剖面线SX, *YX_SX 画截断线KL, *YX_KL 画截断线HL, *YX_HL 画截断线TT, *YX_TT 画线修剪TY, *YX_TY 直线修剪FF, *YX_FF 连接线段FD, *YX_FD 智能连接CHL, *YX_CHL 检查线段是否断开AS, *YX_AS 不规则圆弧修正SL, *YX_SL 样条曲线转圆弧(线割用) OU, *YX_OU 双边偏移YL, *YX_YL 动态拉长LLM, *YX_LM 合并线段YT, *YX_YT 直线两端延长STS, *YX_STS 样条曲线去除相切LN, *YX_LN 计算多线条的总长度DFX, *YX_DFX 等分线条BN, *YX_BREAK 重复打断于点OL, *YX_OL 直线交点打断HH, *YX_HH 垂直构造线VV, *YX_VV 水平构造线XC, *YX_XC 直线转构造线;圆工具AC, *YX_AC 圆弧转圆CTY, *YX_CTY 圆坐标列表CTU, *YX_CTU 圆数量统计ER, *YX_EDR 批量修改圆,圆弧半径;块工具EB, *YX_EB 编辑块BG, *YX_BG 替换块BF, *YX_BF 块旋转还原BS, *YX_BS 统计块的数量EC, *YX_EC 坐标值零数转整数(整理顶针) BC, *YX_BC 复制块内图元EBT, *YX_EBT 分解含属性的块保持属性值BRE, *YX_BRE 修改图块名NB, *YX_NB 建立匿名块BUN, *YX_BUN 匿名块转有名块BNU, *YX_BNU 有名块转匿名块EG, *YX_EG 分解所有组EUG, *YX_EUG 分解所有匿名组;旋转E1, *YX_E1 旋转+1 度R1, *YX_R1 旋转-1 度E2, *YX_E2 旋转+2 度R2, *YX_R2 旋转-2 度E3, *YX_E3 旋转+3 度R3, *YX_R3 旋转-3 度E45, *YX_E45 旋转+45 度R45, *YX_R45 旋转-45度E4, *YX_E4 旋转+90 度R4, *YX_R4 旋转-90 度R5, *YX_R5 旋转+180 度;旋转复制CR, *YX_CR 旋转复制CE1, *YX_CE1 旋转复制+1 度CR1, *YX_CR1 旋转复制-1 度CE2, *YX_CE2 旋转复制+2 度CR2, *YX_CR2 旋转复制-2 度CE3, *YX_CE3 旋转复制+3 度CR3, *YX_CR3 旋转复制-3 度CE45, *YX_CE45 旋转复制+45 度CR45, *YX_CR45 旋转复制-45度CE4, *YX_CE4 旋转复制+90 度CR4, *YX_CR4 旋转复制-90 度CR5, *YX_CR5 旋转复制+180 度;颜色工具CV, *YX_CV 改变对象颜色C1, *YX_C1 改变对象颜色为红色C2, *YX_C2 改变对象颜色为黄色C3, *YX_C3 改变对象颜色为绿色C4, *YX_C4 改变对象颜色为青色C5, *YX_C5 改变对象颜色为蓝色C6, *YX_C6 改变对象颜色为洋红C7, *YX_C7 改变对象颜色为白色C8, *YX_C8 改变对象颜色为灰色C9, *YX_C9 改变对象颜色为浅灰色KBL, *YX_BYLAYEROBJ 将对象属性改为该层默认值XS, *YX_XS 改变对象线型比例因子X1, *YX_X1 改变对象线型为Continuous 细实线X2, *YX_X2 改变对象线型为CENTER 中心线X3, *YX_X3 改变对象线型为HIDDEN 虚线X4, *YX_X4 改变对象线型为CENTER 虚线X5, *YX_X5 改变对象线型为PHANTOM 双点画线A1, *YX_A1 改变线性+颜色+比例1A2, *YX_A2 改变线性+颜色+比例2A3, *YX_A3 改变线性+颜色+比例3A4, *YX_A4 改变线性+颜色+比例4A5, *YX_A5 改变线性+颜色+比例5;常用工具VS, *YX_VS 保存视图EW, *YX_EW 对象快速过滤EQ, *YX_EQ 对象匹配过滤ML, *YX_ML 以直线镜像4MI, *YX_4MI 4分之1镜像4RC, *YX_4RC 4分之1旋转复制JT, *YX_JT 画箭头REGSS, *YX_REGSS 局部对象重生RH, *YX_RH 未知角度转正SS, *YX_SS 相同比例重复缩放RR, *YX_RR 相同角度重复旋转MM, *YX_MM 相同距离重复移动CC, *YX_CC 相同距离重复复制PU, *YX_PU 清理全部垃圾LJ, *YX_LJ 删除垃圾文件FS, *YX_FS 清理保存FCC, *YX_FCC 清理保存退出;文字工具CK, *YX_CK 词库MJ, *YX_MJ 连续命名TH, *YX_TH 修改文字高度TE, *YX_TXTEXP 文字分解;计算工具CM, *YX_CM 重量计算CA, *YX_CA 斜顶角度计算CS, *YX_CS 承板厚度计算CG, *YX_CG 三板模导柱变形量计算;模具工具BM, *YX_BM BOMDT, *YX_DT 定料尺寸CJ, *YX_CJ 小标题VE, *YX_VE 修改版次JB, *YX_JBFD 局部放大AU, *YX_ASMOUT 组立图3D输出EWE, *YX_EWE 顶针过滤ETU, *YX_ETU 顶针数量统计ETY, *YX_ETY 顶针坐标列表EXE, *YX_EXE 顶针孔输出清理MK, *YX_MK 模仁角避空;模具资料PI, *YX_PI 塑料资料PM, *YX_PM 模具钢材资料PC, *YX_PC AutoCAD使用技巧PE, *YX_PE 注塑不良解決方法PG, *YX_PG 塑胶模具经典结构PY, *YX_PY 塑胶模具设计注意事项;模具标准件K, *YX_K 零件库MB, *YX_MB 模胚CL, *YX_CL 水路ET, *YX_ET 顶针TF, *YX_TF 弹簧SW, *YX_SW 内六角螺丝SR, *YX_SPRUE 定位环/唧咀HS, *YX_HS 热流道SP, *YX_SP 支撑柱AG, *YX_AG 斜导柱LP, *YX_LP 垃圾钉XW, *YX_XW 限位块EGP, *YX_EGP 顶针板导柱GE, *YX_GE 直齿轮ES, *YX_ES 穿丝孔SW2, *YX_SW2 其他螺丝SBM, *YX_SBM 三板模相关;标注加强工具DQ, *YX_DQ 快速标注D, *YX_D 线性标注DE, *YX_DE 线性标注(2)DX, *YX_DX 对齐标注(1)DW, *YX_DW 对齐标注(2)DA, *YX_DA 坐标标注DDR, *YX_DDR 半径标注DD, *YX_DD 直径标注DV, *YX_DV 角度标注DC, *YX_DC 连续标注DB, *YX_DB 基线标注Q, *YX_Q 快速引线标注;标注超强工具AQ, *YX_AQ 计算打印区域标注文字高度UY, *YX_UY 设置当前坐标原点SH, *YX_SH 设置当前标注文字高度N, *YX_N 智能标注DF, *YX_DF 坐标标注+连续标注CCD, *YX_CCD 表面粗糙度标注DS, *YX_DS 批量坐标标注DH, *YX_DH 坐标标注(单点)DAQ, *YX_DAQ 引线坐标标注DDE, *YX_DDE 线性直径标注DDW, *YX_DDW 对齐直径标注DDA, *YX_DDA 批量直径标注+半径标注DR, *YX_DR 直径标注+半径标注(可添加文字) ;标注修改工具AD, *YX_AD 标注刷子EED, *YX_EED 标注删除DTH, *YX_DTH 修改标注文字高度UYU, *YX_UYU 修改坐标标注原点UYQ, *YX_UYQ 修改引线坐标标注原点DUP, *YX_DUP 修改标注精度DAUP, *YX_DAUP 修改角度标注精度DTZ, *YX_DTZ 修改标注是否消零DSC, *YX_DSC 修改标注比例因子DTC, *YX_DTC 修改标注文字颜色DCC, *YX_DCC 修改尺寸线颜色DEC, *YX_DEC 修改尺寸界线颜色DG, *YX_DG 添加公差DTK, *YX_DTK 添加标注文字边框DFZ, *YX_DFZ 翻转标注文字方向DAF, *YX_DAF 坐标标注尺寸界线变直DAZ, *YX_DAZ 坐标标注文字重叠整理DDZ, *YX_DDZ 线性标注文字重叠整理SDTA, *YX_SDTA 所有标注已改变到当前标注样式;标注检查工具CUY, *YX_CUY 检查坐标标注原点个数CDA, *YX_CDA 检查坐标标注定义点是否正确CDT, *YX_CDT 检查全部标注是否有公差CDE, *YX_CDE 检查标注测量值是否被修改CDS, *YX_CDS 检查全部标注的比例因子;标注文字工具DTY, *YX_DTY 标注文字还原DN, *YX_DN 文字前加数量DM, *YX_DM 文字前加螺丝数量DS1, *YX_DS1 文字后加拔模斜度<单边>DS2, *YX_DS2 文字后加拔模斜度<双边>D1, *YX_D1 文字前加%%cD2, *YX_D2 文字后加%%dD3, *YX_D3 文字前加MD4, *YX_D4 文字后加(ref)D5, *YX_D5 文字前加%%pD6, *YX_D6 文字前后加()D7, *YX_D7 文字前后加<>D8, *YX_D8 文字后加X45%%DD9, *YX_D9 文字后加(NO DRAFT)DA1, *YX_DA1 文字后加(镶针)DA2, *YX_DA2 文字后加(司筒)DA3, *YX_DA3 文字后加(穿丝孔)DA4, *YX_DA4 文字后加(盲孔)DA5, *YX_DA5 文字后加(通孔)DA6, *YX_DA6 文字后加(全周)DA7, *YX_DA7 文字后加(直身)DA8, *YX_DA8 文字后加(无斜度);倒圆角F, *YX_F 倒圆角FT, *YX_FT 倒圆角<不剪切>F01, *YX_F01F02, *YX_F02F03, *YX_F03F05, *YX_F05F1, *YX_F1F2, *YX_F2F4, *YX_F4F5, *YX_F5F6, *YX_F6F7, *YX_F7F8, *YX_F8F9, *YX_F9F10, *YX_F10F12, *YX_F12F20, *YX_F20F30, *YX_F30F50, *YX_F50;倒角G, *YX_G 倒角<剪切> GT, *YX_GT 倒角<不剪切> G01, *YX_G01G02, *YX_G02G03, *YX_G03G05, *YX_G05G1, *YX_G1G2, *YX_G2G3, *YX_G3G4, *YX_G4G5, *YX_G5G6, *YX_G6G7, *YX_G7G8, *YX_G8G9, *YX_G9G10, *YX_G10G12, *YX_G12G20, *YX_G20G30, *YX_G30G50, *YX_G50;延长Y, *YX_Y 延长Y01, *YX_Y01Y02, *YX_Y02Y03, *YX_Y03Y05, *YX_Y05Y1, *YX_Y1Y2, *YX_Y2Y3, *YX_Y3Y4, *YX_Y4Y5, *YX_Y5Y6, *YX_Y6Y7, *YX_Y7Y8, *YX_Y8Y9, *YX_Y9Y10, *YX_Y10Y12, *YX_Y12Y20, *YX_Y20Y30, *YX_Y30Y50, *YX_Y50;偏移OO, *YX_OO 偏移O02, *YX_O02O03, *YX_O03O05, *YX_O05O1, *YX_O1O2, *YX_O2O3, *YX_O3O4, *YX_O4O5, *YX_O5O6, *YX_O6O7, *YX_O7O8, *YX_O8O9, *YX_O9O10, *YX_O10O12, *YX_O12O20, *YX_O20O30, *YX_O30O50, *YX_O50;CAD自带命令;C, *COPY;CD, *CIRCLE;WW, *MIRROR;AA, *MATCHPROP;QQ, *PLOT;CCA, *CLOSEALL1.当打开多个CAD文件时，可以按Ctrl+Tab来进行图形窗口的切换。
燕秀快捷键自定义,图片,文字演示-20页word资料
下面是燕秀工具箱快捷键定义方法，文档下方有快捷键功能介绍，和整理好的的快键键1装完燕秀工具箱的CAD打开后会处出现燕秀工具条2.单击点击CAD中出现的燕秀工具条会出一选择界面，第二项现环境设置，3鼠标移动到上面会出先另一选择界面，点击自定义快捷键弹出下面图框，里面介绍可以看一下，看不懂也没关系，不用管它直接点确定弹出下面TXT文本，这里面都是CAD自带快捷命令什么都不要动，否则会带导致CAD 中自带快捷命令有些就不能用了，4拖动滚动条到最下面，No xlate ; DO NOT REMOVE到此处就把你想要的快捷指令复制进来关闭，保存5，上面的做完后要重新加载快捷键，方法如下：a单击点击CAD中出现的燕秀工具条会出一选择界面，b鼠标移动到第二项环境设置出现选择框，点击重新加载快捷键文件（R），到此处快捷键加载就完成了。
下面是快捷键所表达的功能MLCK, *YX_MLCK;环境设置NA, *YX_NEWALL 新建全部NL, *YX_LAY_NEWALL 新建常用图层NS, *YX_NEWSTYLE 新建常用文字样式ND, *YX_NEWDIMSTY 新建YanXiu标注样式STM, *YX_STM 设置当前线型为公制;隐藏工具HY, *YX_HIDE 隐藏对象HU, *YX_SHOW 取消全部隐藏H6, *YX_HIDEA 隐藏对象到A 组U6, *YX_SHOWA 取消A 组隐藏H7, *YX_HIDEB 隐藏对象到B 组U7, *YX_SHOWB 取消B 组隐藏;图层工具BL, *YX_BL 浏览图层LO, *YX_LAY_OFFSEL 关闭选取图层LOO, *YX_LAY_OFFSELO 关闭选取以外的图层LOP, *YX_LAY_OFFP 反向关闭图层LUO, *YX_LAY_ALLON 全部图层已打开LL, *YX_LAY_LOCKSEL 锁定选取图层LLL, *YX_LAY_LOCKSELL 锁定选取以外的图层LLP, *YX_LAY_LOCKP 反向锁定图层LLU, *YX_LAY_UNLOCKSEL 解锁选取图层LUL, *YX_LAY_ALLUNLOCK 全部图层已解锁LF, *YX_LAY_FREEZESEL 冻结选取图层LFF, *YX_LAY_FREEZESELF 冻结选取以外的图层LFP, *YX_LAY_FREEZEP 反向冻结图层LUF, *YX_LAY_ALLTHAW 全部图层已解冻LUU, *YX_LAY_ALLTUO 全部图层已解冻,解锁,打开KDA, *YX_LAY_DIMALL 将所有标注改变为dim层KDTA, *YX_LAY_DIMTMPALL;设置当前图层AI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER 中心线层LCO, *YX_LAY_SET_COOL 水路层LCR, *YX_LAY_SET_CORE 模仁层LD, *YX_LAY_SET_DIM 标注层LDT, *YX_LAY_SET_DIM_TEMP 临时标注层LE, *YX_LAY_SET_EPIN 顶针层LFR, *YX_LAY_SET_FROMAT 产品层LH, *YX_LAY_SET_HATCH 填充层LI, *YX_LAY_SET_INSERT 镶件层LA, *YX_LAY_SET_LIFE 斜顶层LM, *YX_LAY_SET_MOLDBASE 模胚层LP, *YX_LAY_SET_PART 产品层LR, *YX_LAY_SET_RUNNER 流道层LS, *YX_LAY_SET_SCREW 螺丝层LSL, *YX_LAY_SET_SLIDE 滑块层LSP, *YX_LAY_SET_SP 撑头层LST, *YX_LAY_SET_STD 标准件层LSR, *YX_LAY_SET_SPRING 弹弓层LTE, *YX_LAY_SET_TEMP 临时层LT, *YX_LAY_SET_TEXT 文字层;线工具CE, *YX_CEN 智能中心线AXS, *YX_AXS 自动调整线型比例SEC, *YX_SEC 画剖面线SX, *YX_SX 画截断线KL, *YX_KL 画截断线HL, *YX_HL 画截断线TT, *YX_TT 画线修剪TY, *YX_TY 直线修剪FF, *YX_FF 连接线段FD, *YX_FD 智能连接CHL, *YX_CHL 检查线段是否断开AS, *YX_AS 不规则圆弧修正SL, *YX_SL 样条曲线转圆弧(线割用) OU, *YX_OU 双边偏移YL, *YX_YL 动态拉长LLM, *YX_LM 合并线段YT, *YX_YT 直线两端延长STS, *YX_STS 样条曲线去除相切LN, *YX_LN 计算多线条的总长度DFX, *YX_DFX 等分线条BN, *YX_BREAK 重复打断于点OL, *YX_OL 直线交点打断HH, *YX_HH 垂直构造线VV, *YX_VV 水平构造线XC, *YX_XC 直线转构造线;圆工具AC, *YX_AC 圆弧转圆CTY, *YX_CTY 圆坐标列表CTU, *YX_CTU 圆数量统计ER, *YX_EDR 批量修改圆,圆弧半径;块工具EB, *YX_EB 编辑块BG, *YX_BG 替换块BF, *YX_BF 块旋转还原BS, *YX_BS 统计块的数量EC, *YX_EC 坐标值零数转整数(整理顶针) BC, *YX_BC 复制块内图元EBT, *YX_EBT 分解含属性的块保持属性值BRE, *YX_BRE 修改图块名NB, *YX_NB 建立匿名块BUN, *YX_BUN 匿名块转有名块BNU, *YX_BNU 有名块转匿名块EG, *YX_EG 分解所有组EUG, *YX_EUG 分解所有匿名组;旋转E1, *YX_E1 旋转+1 度R1, *YX_R1 旋转-1 度E2, *YX_E2 旋转+2 度R2, *YX_R2 旋转-2 度E3, *YX_E3 旋转+3 度R3, *YX_R3 旋转-3 度E45, *YX_E45 旋转+45 度R45, *YX_R45 旋转-45度E4, *YX_E4 旋转+90 度R4, *YX_R4 旋转-90 度R5, *YX_R5 旋转+180 度;旋转复制CR, *YX_CR 旋转复制CE1, *YX_CE1 旋转复制+1 度CR1, *YX_CR1 旋转复制-1 度CE2, *YX_CE2 旋转复制+2 度CR2, *YX_CR2 旋转复制-2 度CE3, *YX_CE3 旋转复制+3 度CR3, *YX_CR3 旋转复制-3 度CE45, *YX_CE45 旋转复制+45 度CR45, *YX_CR45 旋转复制-45度CE4, *YX_CE4 旋转复制+90 度CR4, *YX_CR4 旋转复制-90 度CR5, *YX_CR5 旋转复制+180 度;颜色工具CV, *YX_CV 改变对象颜色C1, *YX_C1 改变对象颜色为红色C2, *YX_C2 改变对象颜色为黄色C3, *YX_C3 改变对象颜色为绿色C4, *YX_C4 改变对象颜色为青色C5, *YX_C5 改变对象颜色为蓝色C6, *YX_C6 改变对象颜色为洋红C7, *YX_C7 改变对象颜色为白色C8, *YX_C8 改变对象颜色为灰色C9, *YX_C9 改变对象颜色为浅灰色KBL, *YX_BYLAYEROBJ 将对象属性改为该层默认值XS, *YX_XS 改变对象线型比例因子X1, *YX_X1 改变对象线型为Continuous X2, *YX_X2 改变对象线型为CENTER X3, *YX_X3 改变对象线型为HIDDENX4, *YX_X4 改变对象线型为CENTER X5, *YX_X5 改变对象线型为PHANTOM A1, *YX_A1 改变线性+颜色+比例1A2, *YX_A2 改变线性+颜色+比例2A3, *YX_A3 改变线性+颜色+比例3A4, *YX_A4 改变线性+颜色+比例4A5, *YX_A5 改变线性+颜色+比例5;常用工具VS, *YX_VS 保存视图EW, *YX_EW 对象快速过滤EQ, *YX_EQ 对象匹配过滤ML, *YX_ML 以直线镜像4MI, *YX_4MI 4分之1镜像4RC, *YX_4RC 4分之1旋转复制JT, *YX_JT 画箭头REGSS, *YX_REGSS 局部对象重生RH, *YX_RH 未知角度转正SS, *YX_SS 相同比例重复缩放RR, *YX_RR 相同角度重复旋转MM, *YX_MM 相同距离重复移动CC, *YX_CC 相同距离重复复制PU, *YX_PU 清理全部垃圾LJ, *YX_LJ 删除垃圾文件FS, *YX_FS 清理保存FCC, *YX_FCC 清理保存退出;文字工具CK, *YX_CK 词库MJ, *YX_MJ 连续命名TH, *YX_TH 修改文字高度TE, *YX_TXTEXP 文字分解;计算工具CM, *YX_CM 重量计算CA, *YX_CA 斜顶角度计算CS, *YX_CS 承板厚度计算CG, *YX_CG 三板模导柱变形量计算;模具工具BM, *YX_BM BOMDT, *YX_DT 定料尺寸CJ, *YX_CJ 小标题VE, *YX_VE 修改版次JB, *YX_JBFD 局部放大AU, *YX_ASMOUT 组立图3D输出EWE, *YX_EWE 顶针过滤ETU, *YX_ETU 顶针数量统计ETY, *YX_ETY 顶针坐标列表EXE, *YX_EXE 顶针孔输出清理MK, *YX_MK 模仁角避空;模具资料PI, *YX_PI 塑料资料PM, *YX_PM 模具钢材资料PC, *YX_PC AutoCAD使用技巧PE, *YX_PE 注塑不良解決方法PG, *YX_PG 塑胶模具经典结构PY, *YX_PY 塑胶模具设计注意事项;模具标准件K, *YX_K 零件库MB, *YX_MB 模胚CL, *YX_CL 水路ET, *YX_ET 顶针TF, *YX_TF 弹簧SW, *YX_SW 内六角螺丝SR, *YX_SPRUE 定位环/唧咀HS, *YX_HS 热流道SP, *YX_SP 支撑柱AG, *YX_AG 斜导柱LP, *YX_LP 垃圾钉XW, *YX_XW 限位块EGP, *YX_EGP 顶针板导柱GE, *YX_GE 直齿轮ES, *YX_ES 穿丝孔SW2, *YX_SW2 其他螺丝SBM, *YX_SBM 三板模相关;标注加强工具DQ, *YX_DQ 快速标注D, *YX_D 线性标注DE, *YX_DE 线性标注(2)DX, *YX_DX 对齐标注(1)DW, *YX_DW 对齐标注(2)DA, *YX_DA 坐标标注DDR, *YX_DDR 半径标注DD, *YX_DD 直径标注DV, *YX_DV 角度标注DC, *YX_DC 连续标注DB, *YX_DB 基线标注Q, *YX_Q 快速引线标注;标注超强工具AQ, *YX_AQ 计算打印区域标注文字高度UY, *YX_UY 设置当前坐标原点SH, *YX_SH 设置当前标注文字高度N, *YX_N 智能标注DF, *YX_DF 坐标标注+连续标注CCD, *YX_CCD 表面粗糙度标注DS, *YX_DS 批量坐标标注DH, *YX_DH 坐标标注(单点)DAQ, *YX_DAQ 引线坐标标注DDE, *YX_DDE 线性直径标注DDW, *YX_DDW 对齐直径标注DDA, *YX_DDA 批量直径标注+半径标注DR, *YX_DR 直径标注+半径标注(可添加文字) ;标注修改工具AD, *YX_AD 标注刷子EED, *YX_EED 标注删除DTH, *YX_DTH 修改标注文字高度UYU, *YX_UYU 修改坐标标注原点UYQ, *YX_UYQ 修改引线坐标标注原点DUP, *YX_DUP 修改标注精度DAUP, *YX_DAUP 修改角度标注精度DTZ, *YX_DTZ 修改标注是否消零DSC, *YX_DSC 修改标注比例因子DTC, *YX_DTC 修改标注文字颜色DCC, *YX_DCC 修改尺寸线颜色DEC, *YX_DEC 修改尺寸界线颜色DG, *YX_DG 添加公差DTK, *YX_DTK 添加标注文字边框DFZ, *YX_DFZ 翻转标注文字方向DAF, *YX_DAF 坐标标注尺寸界线变直DAZ, *YX_DAZ 坐标标注文字重叠整理DDZ, *YX_DDZ 线性标注文字重叠整理SDTA, *YX_SDTA 所有标注已改变到当前标注样式;标注检查工具CUY, *YX_CUY 检查坐标标注原点个数CDA, *YX_CDA 检查坐标标注定义点是否正确CDT, *YX_CDT 检查全部标注是否有公差CDE, *YX_CDE 检查标注测量值是否被修改CDS, *YX_CDS 检查全部标注的比例因子;标注文字工具DTY, *YX_DTY 标注文字还原DN, *YX_DN 文字前加数量DM, *YX_DM 文字前加螺丝数量DS1, *YX_DS1 文字后加拔模斜度<单边> DS2, *YX_DS2 文字后加拔模斜度<双边> D1, *YX_D1 文字前加%%cD2, *YX_D2 文字后加%%dD3, *YX_D3 文字前加MD4, *YX_D4 文字后加(ref)D5, *YX_D5 文字前加%%pD6, *YX_D6 文字前后加()D7, *YX_D7 文字前后加<>D8, *YX_D8 文字后加X45%%DD9, *YX_D9 文字后加(NO DRAFT) DA1, *YX_DA1 文字后加(镶针)DA2, *YX_DA2 文字后加(司筒)DA3, *YX_DA3 文字后加(穿丝孔)DA4, *YX_DA4 文字后加(盲孔)DA5, *YX_DA5 文字后加(通孔)DA6, *YX_DA6 文字后加(全周)DA7, *YX_DA7 文字后加(直身)DA8, *YX_DA8 文字后加(无斜度);倒圆角F, *YX_F 倒圆角FT, *YX_FT 倒圆角<不剪切> F01, *YX_F01F02, *YX_F02F03, *YX_F03F05, *YX_F05F1, *YX_F1F2, *YX_F2F3, *YX_F3F4, *YX_F4F5, *YX_F5F6, *YX_F6F7, *YX_F7F8, *YX_F8F9, *YX_F9F10, *YX_F10F12, *YX_F12F20, *YX_F20F30, *YX_F30F50, *YX_F50;倒角G, *YX_G 倒角<剪切> GT, *YX_GT 倒角<不剪切>G01, *YX_G01G02, *YX_G02G03, *YX_G03G05, *YX_G05G1, *YX_G1G2, *YX_G2G3, *YX_G3G4, *YX_G4G5, *YX_G5G6, *YX_G6G7, *YX_G7G8, *YX_G8G9, *YX_G9G10, *YX_G10G12, *YX_G12G20, *YX_G20G30, *YX_G30G50, *YX_G50;延长Y, *YX_Y 延长Y01, *YX_Y01Y02, *YX_Y02Y03, *YX_Y03Y05, *YX_Y05Y1, *YX_Y1Y2, *YX_Y2Y3, *YX_Y3Y4, *YX_Y4Y5, *YX_Y5Y6, *YX_Y6Y7, *YX_Y7Y8, *YX_Y8Y9, *YX_Y9Y10, *YX_Y10Y12, *YX_Y12Y20, *YX_Y20Y30, *YX_Y30Y50, *YX_Y50;偏移OO, *YX_OO 偏移O01, *YX_O01O02, *YX_O02O03, *YX_O03O05, *YX_O05O2, *YX_O2O3, *YX_O3O4, *YX_O4O5, *YX_O5O6, *YX_O6O7, *YX_O7O8, *YX_O8O9, *YX_O9O10, *YX_O10O12, *YX_O12O20, *YX_O20O30, *YX_O30O50, *YX_O50;CAD自带命令;C, *COPY;CD, *CIRCLE;WW, *MIRROR;AA, *MATCHPROP;QQ, *PLOT;CCA, *CLOSEALL上面的命令可以选择自己想要的命令，（后面汉字要删除），到CAD中若果不想自己整理下面是燕秀的全部快捷指令，，直接复制到上面所讲的TXT文本中就行，下面的快捷指令都是上面叙述的，不知快捷键的功能，可以参照上面，指令后面的文字解释NA, *YX_NEW ALLNL, *YX_LAY_NEWALLNS, *YX_NEWSTYLEND, *YX_NEWDIMSTYSTM, *YX_STMXF, *YX_BDXFYM, *YX_YXMLHY, *YX_HIDEHU, *YX_SHOWHB, *YX_HBUB, *YX_UBU6, *YX_SHOW AH7, *YX_HIDEBU7, *YX_SHOWBBL, *YX_BLLO, *YX_LAY_OFFSELLOO, *YX_LAY_OFFSELO LOP, *YX_LAY_OFFPLUO, *YX_LAY_ALLONLk, *YX_LAY_LOCKSELLkk, *YX_LAY_LOCKSELL LkP, *YX_LAY_LOCKPLkU, *YX_LAY_UNLOCKSEL LUL, *YX_LAY_ALLUNLOCK LF, *YX_LAY_FREEZESEL LFF, *YX_LAY_FREEZESELF LFP, *YX_LAY_FREEZEPLUF, *YX_LAY_ALLTHAW LUU, *YX_LAY_ALLTUOKDA, *YX_LAY_DIMALL KDTA, *YX_LAY_DIMTMPALLAI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER LCO, *YX_LAY_SET_COOL LCR, *YX_LAY_SET_CORELD, *YX_LAY_SET_DIMLDT, *YX_LAY_SET_DIM_TEMP LE, *YX_LAY_SET_EPINLFR, *YX_LAY_SET_FROMLH, *YX_LAY_SET_HA TCHLI, *YX_LAY_SET_INSERT LA, *YX_LAY_SET_LIFTLM, *YX_LAY_SET_MOLDBASE LP, *YX_LAY_SET_PARTLR, *YX_LAY_SET_RUNNER LS, *YX_LAY_SET_SCREW LSL, *YX_LAY_SET_SLIDE LSP, *YX_LAY_SET_SPLST, *YX_LAY_SET_STDLSR, *YX_LAY_SET_SPRING LTE, *YX_LAY_SET_TEMPLT, *YX_LAY_SET_TEXTCE, *YX_CENSCF, *YX_SCFLL, *YX_LL SEC, *YX_SEC SX, *YX_SX KL, *YX_KL HL, *YX_HL TT, *YX_TT TY, *YX_TY FF, *YX_FF FD, *YX_FD CHL, *YX_CHL AS, *YX_AS SL, *YX_SL ZS, *YX_ZS OU, *YX_OU YL, *YX_YL LLM, *YX_LM YT, *YX_YT STS, *YX_STS LN, *YX_LN DFX, *YX_DFX BN, *YX_BREAK OL, *YX_OL HH, *YX_HH VV, *YX_VV XC, *YX_XC AC, *YX_AC CTY, *YX_CTY CTU, *YX_CTU ER, *YX_EDR EB, *YX_EB BG, *YX_BG BF, *YX_BF BS, *YX_BS BI, *YX_BI EC, *YX_EC BAA, *YX_BAA BAC, *YX_BAC BC, *YX_BC EXB, *YX_EXB EBT, *YX_EBT BRE, *YX_BRE NB, *YX_NB BUN, *YX_BUNEG, *YX_EGEUG, *YX_EUGCK, *YX_CKJK, *YX_JKMJ, *YX_MJWT, *YX_WTTH, *YX_THTE, *YX_TXTEXPE1, *YX_E1R1, *YX_R1E2, *YX_E2R2, *YX_R2E3, *YX_E3R3, *YX_R3E45, *YX_E45R45, *YX_R45E4, *YX_E4R4, *YX_R4R5, *YX_R5CR, *YX_CRCE1, *YX_CE1CR1, *YX_CR1CE2, *YX_CE2CR2, *YX_CR2CE3, *YX_CE3CR3, *YX_CR3CE45, *YX_CE45CR45, *YX_CR45CE4, *YX_CE4CR4, *YX_CR4CR5, *YX_CR5CB, *YX_CBCV, *YX_CVC1, *YX_C1C2, *YX_C2C3, *YX_C3C4, *YX_C4C5, *YX_C5C6, *YX_C6C7, *YX_C7C8, *YX_C8C9, *YX_C9KBL, *YX_BYLAYEROBJX1, *YX_X1X2, *YX_X2X3, *YX_X3X4, *YX_X4X5, *YX_X5A1, *YX_A1A2, *YX_A2A3, *YX_A3A4, *YX_A4A5, *YX_A5 ROO, *YX_ROO CRR, *YX_CRR VD, *YX_VD VS, *YX_VS EW, *YX_EW EQ, *YX_EQ BJ, *YX_BJ BX, *YX_BX ML, *YX_ML4MI, *YX_4MI4RC, *YX_4RC JT, *YX_JT ZG, *YX_ZG REGSS, *YX_REGSS RH, *YX_RH SS, *YX_SS SCC, *YX_SCC RR, *YX_RR MM, *YX_MM CC, *YX_CC PU, *YX_PU LJ, *YX_LJ ZYT, *YX_ZYT FS, *YX_FS FCC, *YX_FCC CM, *YX_CM CA, *YX_CA CS, *YX_CS CG, *YX_CG BM, *YX_BM QB, *YX_QB JG, *YX_JG DT, *YX_DTVE, *YX_VEJB, *YX_JBFD AU, *YX_ASMOUT FC, *YX_FC EWE, *YX_EWE ETU, *YX_ETU ETY, *YX_ETY EXE, *YX_EXE MK, *YX_MKPI, *YX_PIPM, *YX_PM PC, *YX_PCPE, *YX_PEPG, *YX_PGPT, *YX_PTK, *YX_KMB, *YX_MB CL, *YX_CLET, *YX_ETTF, *YX_TFSW, *YX_SW SR, *YX_SPRUE HS, *YX_HSSP, *YX_SPAG, *YX_AGLP, *YX_LPXW, *YX_XW EGP, *YX_EGP GE, *YX_GEES, *YX_ESSW2, *YX_SW2 SBM, *YX_SBM DQ, *YX_DQD, *YX_DDE, *YX_DEDX, *YX_DX DW, *YX_DW DA, *YX_DA DDR, *YX_DDR DD, *YX_DD DV, *YX_DV DC, *YX_DCDB, *YX_DBAQ, *YX_AQ UY, *YX_UY UYF, *YX_UYF SH, *YX_SH N, *YX_N DF, *YX_DF CCD, *YX_CCD DS, *YX_DS DH, *YX_DH DAQ, *YX_DAQ DDE, *YX_DDE DDW, *YX_DDW DDA, *YX_DDA DR, *YX_DR QD, *YX_QD AD, *YX_AD EED, *YX_EED DTH, *YX_DTH UYU, *YX_UYU UYQ, *YX_UYQ DUP, *YX_DUP DAUP, *YX_DAUP DTZ, *YX_DTZ DSC, *YX_DSC DTC, *YX_DTC DCC, *YX_DCC DEC, *YX_DEC DG, *YX_DG DTK, *YX_DTK DFZ, *YX_DFZ DAF, *YX_DAF DAZ, *YX_DAZ DDZ, *YX_DDZ DGL, *YX_DGL SDTA, *YX_SDTA CUY, *YX_CUY CDA, *YX_CDA CDD, *YX_CDD CDT, *YX_CDT CDE, *YX_CDE CDS, *YX_CDS DTY, *YX_DTY DN, *YX_DNDS1, *YX_DS1 DS2, *YX_DS2 D1, *YX_D1 D2, *YX_D2 D3, *YX_D3 D4, *YX_D4 D5, *YX_D5 D6, *YX_D6 D7, *YX_D7 D8, *YX_D8 D9, *YX_D9 AT1, *YX_AT1 AT2, *YX_AT2 AT3, *YX_AT3 DA1, *YX_DA1 DA2, *YX_DA2 DA3, *YX_DA3 DA4, *YX_DA4 DA5, *YX_DA5 DA6, *YX_DA6 DA7, *YX_DA7 DA8, *YX_DA8 F, *YX_F FT, *YX_FTF01, *YX_F01 F02, *YX_F02 F03, *YX_F03 F05, *YX_F05 F1, *YX_F1F2, *YX_F2F3, *YX_F3F4, *YX_F4F5, *YX_F5F6, *YX_F6F7, *YX_F7F8, *YX_F8F9, *YX_F9F10, *YX_F10 F20, *YX_F20 F30, *YX_F30 F50, *YX_F50 G, *YX_G GT, *YX_GTG02, *YX_G02 G03, *YX_G03 G05, *YX_G05 G1, *YX_G1 G2, *YX_G2 G3, *YX_G3 G4, *YX_G4 G5, *YX_G5 G6, *YX_G6 G7, *YX_G7 G8, *YX_G8 G9, *YX_G9 G10, *YX_G10 G12, *YX_G12 G20, *YX_G20 G30, *YX_G30 G50, *YX_G50 Y, *YX_YY01, *YX_Y01 Y02, *YX_Y02 Y03, *YX_Y03 Y05, *YX_Y05 Y1, *YX_Y1 Y2, *YX_Y2 Y3, *YX_Y3 Y4, *YX_Y4 Y5, *YX_Y5 Y6, *YX_Y6 Y7, *YX_Y7 Y8, *YX_Y8 Y9, *YX_Y9 Y10, *YX_Y10 Y12, *YX_Y12 Y20, *YX_Y20 Y30, *YX_Y30 Y50, *YX_Y50 OO, *YX_OO O01, *YX_O01 O02, *YX_O02 O03, *YX_O03 O05, *YX_O05 O1, *YX_O1 O2, *YX_O2O4, *YX_O4 O5, *YX_O5 O6, *YX_O6 O7, *YX_O7 O8, *YX_O8 O9, *YX_O9 O10, *YX_O10 O12, *YX_O12 O20, *YX_O20 O30, *YX_O30 O50, *YX_O50。
燕秀快捷键设置图文教程
; AutoCAD Program Parameters File For AutoCAD 2012; External Command and Command Alias Definitions; Copyright (C) 1997-2002 by Autodesk, Inc.; Each time you open a new or existing drawing, AutoCAD searches; the support path and reads the first acad.pgp file that it finds.; -- External Commands --; While AutoCAD is running, you can invoke other programs or utilities; such Windows system commands, utilities, and applications.; You define external commands by specifying a command name to be used ; from the AutoCAD command prompt and an executable command string ; that is passed to the operating system.; -- Command Aliases --; You can abbreviate frequently used AutoCAD commands by defining; aliases for them in the command alias section of acad.pgp.; You can create a command alias for any AutoCAD command,; device driver command, or external command.; Recommendation: back up this file before editing it.; External command format:; <Command name>,[<DOS request>],<Bit flag>,[*]<Prompt>,; The bits of the bit flag have the following meanings:; Bit 1: if set, don't wait for the application to finish; Bit 2: if set, run the application minimized; Bit 4: if set, run the application "hidden"; Bit 8: if set, put the argument string in quotes;; Fill the "bit flag" field with the sum of the desired bits.; Bits 2 and 4 are mutually exclusive; if both are specified, only; the 2 bit is used. The most useful values are likely to be 0; (start the application and wait for it to finish), 1 (start the; application and don't wait), 3 (minimize and don't wait), and 5; (hide and don't wait). Values of 2 and 4 should normally be avoided,; as they make AutoCAD unavailable until the application has completed. ;; Bit 8 allows commands like DEL to work properly with filenames that; have spaces such as "long filename.dwg". Note that this will interfere ; with passing space delimited lists of file names to these same commands.; If you prefer multiplefile support to using long file names, turn off; the "8" bit in those commands.; Examples of external commands for command windowsCATALOG, DIR /W, 8,指定文件: ,DEL, DEL, 8,要删除的文件: ,DIR, DIR, 8,指定文件: ,EDIT, START EDIT, 9,要编辑的文件: ,SH, , 1,*操作系统命令: ,SHELL, , 1,*操作系统命令: ,START, START, 1,*要启动的应用程序: ,TYPE, TYPE, 8,要列出的文件: ,; Examples of external commands for Windows; See also the (STARTAPP) AutoLISP function for an alternative method.EXPLORER, START EXPLORER, 1,,NOTEPAD, START NOTEPAD, 1,*要列出的文件: , PBRUSH, START PBRUSH, 1,,; Command alias format:; <Alias>,*<Full command name>; The following are guidelines for creating new command aliases.; 1. An alias should reduce a command by at least two characters.; Commands with a control key equivalent, status bar button,; or function key do not require a command alias.; Examples: Control N, O, P, and S for New, Open, Print, Save.; 2. Try the first character of the command, then try the first two,; then the first three.; 3. Once an alias is defined, add suffixes for related aliases:; Examples: R for Redraw, RA for Redrawall, L for Line, LT for ; Linetype.; 4. Use a hyphen to differentiate between command line and dialog; box commands.; Example: B for Block, -B for -Block.;; Exceptions to the rules include AA for Area, T for Mtext, X for Explode.; -- Sample aliases for AutoCAD commands --; These examples include most frequently used commands.3DO, *3DORBIT3F, *3DFACE3P, *3DPOLYA, *ARCADC, *ADCENTERAA, *AREAAL, *ALIGNAP, *APPLOADAR, *ARRAY-AR, *-ARRAYATT, *ATTDEF-ATT, *-ATTDEFATE, *ATTEDIT-ATE, *-ATTEDITATTE, *-ATTEDITB, *BLOCK-B, *-BLOCKBH, *BHATCHBO, *BOUNDARY-BO, *-BOUNDARYBR, *BREAKC, *CIRCLECH, *PROPERTIES-CH, *CHANGECHA, *CHAMFERCHK, *CHECKSTANDARDS COL, *COLOR COLOUR, *COLORCO, *COPYCP, *COPYD, *DIMSTYLEDAL, *DIMALIGNED DAN, *DIMANGULAR DBA, *DIMBASELINE DBC, *DBCONNECTDC, *ADCENTERDCE, *DIMCENTER DCENTER, *ADCENTER DCO, *DIMCONTINUE DDA, *DIMDISASSOCIATE DDI, *DIMDIAMETER DED, *DIMEDITDI, *DISTDLI, *DIMLINEARDO, *DONUTDOR, *DIMORDINATE DOV, *DIMOVERRIDE DR, *DRAWORDER DRA, *DIMRADIUS DRE, *DIMREASSOCIATE DS, *DSETTINGS DST, *DIMSTYLEDT, *TEXTDV, *DVIEWE, *ERASEED, *DDEDITEL, *ELLIPSEEX, *EXTENDEXIT, *QUITEXP, *EXPORTEXT, *EXTRUDEF, *FILLETFI, *FILTERG, *GROUP-G, *-GROUPGR, *DDGRIPSH, *BHATCH-H, *HATCHHE, *HATCHEDITHI, *HIDEI, *INSERT-I, *-INSERTIAD, *IMAGEADJUST IAT, *IMAGEATTACH ICL, *IMAGECLIPIM, *IMAGE-IM, *-IMAGEIMP, *IMPORTIN, *INTERSECTINF, *INTERFEREIO, *INSERTOBJL, *LINELA, *LAYER-LA, *-LAYERLE, *QLEADERLEN, *LENGTHENLI, *LIST LINEWEIGHT, *LWEIGHTLO, *-LAYOUTLS, *LISTLT, *LINETYPE-LT, *-LINETYPE LTYPE, *LINETYPE-LTYPE, *-LINETYPELTS, *LTSCALELW, *LWEIGHTM, *MOVEMA, *MATCHPROPME, *MEASUREMI, *MIRRORML, *MLINEMO, *PROPERTIESMS, *MSPACEMT, *MTEXTMV, *MVIEWO, *OFFSETOP, *OPTIONSORBIT, *3DORBITOS, *OSNAP-OS, *-OSNAPP, *PAN-P, *-PANPA, *PASTESPEC PARTIALOPEN, *-PARTIALOPEN PE, *PEDITPL, *PLINEPO, *POINTPOL, *POLYGONPR, *PROPERTIES PRCLOSE, *PROPERTIESCLOSE PROPS, *PROPERTIES PRE, *PREVIEWPRINT, *PLOTPS, *PSPACEPTW, *PUBLISHTOWEB PU, *PURGE-PU, *-PURGER, *REDRAWRA, *REDRAWALLRE, *REGENREA, *REGENALL REC, *RECTANG REG, *REGION REN, *RENAME-REN, *-RENAME REV, *REVOLVE RO, *ROTATE RPR, *RPREFRR, *RENDERS, *STRETCHSC, *SCALESCR, *SCRIPTSE, *DSETTINGS SEC, *SECTION SET, *SETVAR SHA, *SHADEMODE SL, *SLICESN, *SNAPSO, *SOLIDSP, *SPELLSPL, *SPLINESPE, *SPLINEDIT ST, *STYLESTA, *STANDARDS SU, *SUBTRACTT, *MTEXT-T, *-MTEXTTA, *TABLETTH, *THICKNESS TI, *TILEMODE TO, *TOOLBAR TOL, *TOLERANCE TOR, *TORUSTP, *TOOLPALETTES TR, *TRIMUC, *UCSMANUN, *UNITS-UN, *-UNITSUNI, *UNIONV, *VIEW-V, *-VIEWVP, *DDVPOINT-VP, *VPOINTW, *WBLOCK-W, *-WBLOCKWE, *WEDGEX, *EXPLODEXA, *XATTACHXB, *XBIND-XB, *-XBINDXC, *XCLIPXL, *XLINEXR, *XREF-XR, *-XREFZ, *ZOOM; The following are alternative aliases and aliases as supplied ; in AutoCAD Release 13.AV, *DSVIEWERCP, *COPYDIMALI, *DIMALIGNEDDIMANG, *DIMANGULARDIMBASE, *DIMBASELINEDIMCONT, *DIMCONTINUEDIMDIA, *DIMDIAMETERDIMED, *DIMEDITDIMTED, *DIMTEDITDIMLIN, *DIMLINEARDIMORD, *DIMORDINATEDIMRAD, *DIMRADIUSDIMSTY, *DIMSTYLEDIMOVER, *DIMOVERRIDELEAD, *LEADERTM, *TILEMODE; Aliases for Hyperlink/URL Release 14 compatibility SAVEURL, *SAVEOPENURL, *OPENINSERTURL, *INSERT; Aliases for commands discontinued in AutoCAD 2000: AAD, *DBCONNECTAEX, *DBCONNECTALI, *DBCONNECTASQ, *DBCONNECTARO, *DBCONNECTASE, *DBCONNECTDDATTDEF, *ATTDEFDDATTEXT, *ATTEXTDDCHPROP, *PROPERTIESDDCOLOR, *COLORDDLMODES, *LAYERDDLTYPE, *LINETYPEDDMODIFY, *PROPERTIESDDOSNAP, *OSNAPDDUCS, *UCS; Aliases for commands discontinued in AutoCAD 2004: ACADBLOCKDIALOG,*BLOCK ACADWBLOCKDIALOG,*WBLOCK ADCENTER,*ADCENTERBMAKE,*BLOCKBMOD,*BLOCKBPOLY,*BOUNDARY CONTENT,*ADCENTERDDATTE,*ATTEDITDDIM,*DIMSTYLE DDINSERT,*INSERT DDPLOTSTAMP,*PLOTSTAMP DDRMODES,*DSETTINGS DDSTYLE,*STYLEDDUCS,*UCSMANDDUCSP,*UCSMAN DDUNITS,*UNITSDDVIEW,*VIEW DIMHORIZONTAL,*DIMLINEAR DIMROTATED,*DIMLINEAR DIMVERTICAL,*DIMLINEAR DOUGHNUT, *DONUTDTEXT,*TEXTDWFOUT,*PLOTDXFIN,*OPENDXFOUT,*SAVEAS PAINTER,*MATCHPROP PREFERENCES,*OPTIONS RECTANGLE,*RECTANGSHADE,*SHADEMODE VIEWPORTS, *VPORTSMLCK, *YX_MLCK;选项ZDY, *YX_ZDY;环境设置NA, *YX_NEWALLNL, *YX_LAY_NEWALLNS, *YX_NEWSTYLEND, *YX_NEWDIMSTYSTM, *YX_STMXF, *YX_BDXFYM, *YX_YXML;隐藏工具HY, *YX_HIDEHU, *YX_SHOWHB, *YX_HBUB, *YX_UBH6, *YX_HIDEAU6, *YX_SHOWAH7, *YX_HIDEBU7, *YX_SHOWB;图层工具BL, *YX_BLLO, *YX_LAY_OFFSELLOO, *YX_LAY_OFFSELO LOP, *YX_LAY_OFFPLUO, *YX_LAY_ALLONLL, *YX_LAY_LOCKSEL LLL, *YX_LAY_LOCKSELL LLP, *YX_LAY_LOCKPLLU, *YX_LAY_UNLOCKSEL LUL, *YX_LAY_ALLUNLOCK LF, *YX_LAY_FREEZESEL LFF, *YX_LAY_FREEZESELF LFP, *YX_LAY_FREEZEP LUF, *YX_LAY_ALLTHAW LUU, *YX_LAY_ALLTUO KDA, *YX_LAY_DIMALL KDTA, *YX_LAY_DIMTMPALL ;设置当前图层AI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER LCO, *YX_LAY_SET_COOL LCR, *YX_LAY_SET_CORE LD, *YX_LAY_SET_DIM LDT, *YX_LAY_SET_DIM_TEMP LE, *YX_LAY_SET_EPIN LFR, *YX_LAY_SET_FROMLH, *YX_LAY_SET_HATCH LI, *YX_LAY_SET_INSERT LA, *YX_LAY_SET_LIFTLM, *YX_LAY_SET_MOLDBASE LP, *YX_LAY_SET_PARTLR, *YX_LAY_SET_RUNNER LS, *YX_LAY_SET_SCREW LSL, *YX_LAY_SET_SLIDE LSP, *YX_LAY_SET_SPLST, *YX_LAY_SET_STDLSR, *YX_LAY_SET_SPRING LTE, *YX_LAY_SET_TEMPLT, *YX_LAY_SET_TEXT;线工具CE, *YX_CENSCF, *YX_SCFAXS, *YX_AXSSEC, *YX_SECSX, *YX_SXKL, *YX_KLHL, *YX_HLTT, *YX_TTTY, *YX_TYFF, *YX_FFFD, *YX_FDCHL, *YX_CHLAS, *YX_ASSL, *YX_SLZS, *YX_ZSOU, *YX_OUYL, *YX_YLLLM, *YX_LMYT, *YX_YTSTS, *YX_STSLN, *YX_LNDFX, *YX_DFXBN, *YX_BREAKOL, *YX_OLHH, *YX_HHVV, *YX_VVXC, *YX_XC;圆工具AC, *YX_ACCTY, *YX_CTYER, *YX_EDR;块工具EB, *YX_EB BG, *YX_BG BF, *YX_BF BS, *YX_BS EC, *YX_EC BAA, *YX_BAA BAC, *YX_BAC BC, *YX_BC EBT, *YX_EBT BRE, *YX_BRE NB, *YX_NB BUN, *YX_BUN BNU, *YX_BNU EG, *YX_EG EUG, *YX_EUG;文字工具CK, *YX_CK JK, *YX_JK MJ, *YX_MJ WT, *YX_WT TH, *YX_TH TE, *YX_TXTEXP ;旋转E1, *YX_E1R1, *YX_R1E2, *YX_E2R2, *YX_R2E3, *YX_E3R3, *YX_R3E45, *YX_E45R45, *YX_R45E4, *YX_E4R4, *YX_R4R5, *YX_R5;旋转复制CR, *YX_CRCE1, *YX_CE1CR1, *YX_CR1CE2, *YX_CE2CR2, *YX_CR2CE3, *YX_CE3CE45, *YX_CE45CR45, *YX_CR45CE4, *YX_CE4CR4, *YX_CR4CR5, *YX_CR5;颜色工具CV, *YX_CVC1, *YX_C1C2, *YX_C2C3, *YX_C3C4, *YX_C4C5, *YX_C5C6, *YX_C6C7, *YX_C7C8, *YX_C8 C9, *YX_C9KBL, *YX_BYLAYEROBJXS, *YX_XSX1, *YX_X1X2, *YX_X2X3, *YX_X3X4, *YX_X4X5, *YX_X5A1, *YX_A1A2, *YX_A2A3, *YX_A3A4, *YX_A4A5, *YX_A5;常用工具ROO, *YX_ROOCRR, *YX_CRRVS, *YX_VSEW, *YX_EWEQ, *YX_EQBJ, *YX_BJBX, *YX_BXML, *YX_ML4MI, *YX_4MI4RC, *YX_4RCJT, *YX_JTZG, *YX_ZGREGSS, *YX_REGSSRH, *YX_RHSS, *YX_SSMM, *YX_MM CC, *YX_CCPU, *YX_PULJ, *YX_LJFS, *YX_FS FCC, *YX_FCC;计算工具CM, *YX_CM CA, *YX_CA CS, *YX_CSCG, *YX_CG;模具工具BM, *YX_BM QB, *YX_QBDT, *YX_DTCJ, *YX_CJVE, *YX_VEJB, *YX_JBFD AU, *YX_ASMOUT FC, *YX_FC EWE, *YX_EWE ETU, *YX_ETU ETY, *YX_ETY EXE, *YX_EXE MK, *YX_MK;模具资料PI, *YX_PIPM, *YX_PM PC, *YX_PCPE, *YX_PEPG, *YX_PGPY, *YX_PY;模具标准件K, *YX_KMB, *YX_MB CL, *YX_CLET, *YX_ETTF, *YX_TFSW, *YX_SW SR, *YX_SPRUE HS, *YX_HSSP, *YX_SPAG, *YX_AGXW, *YX_XW EGP, *YX_EGP GE, *YX_GE ES, *YX_ESSW2, *YX_SW2 SBM, *YX_SBM ;标注加强工具DQ, *YX_DQ D, *YX_D DE, *YX_DE DX, *YX_DX DW, *YX_DW DA, *YX_DA DDR, *YX_DDR DD, *YX_DD DV, *YX_DV DC, *YX_DC DB, *YX_DB Q, *YX_Q;标注超强工具AQ, *YX_AQ UY, *YX_UY UYF, *YX_UYF SH, *YX_SH N, *YX_N DF, *YX_DF CCD, *YX_CCD DS, *YX_DS DH, *YX_DH DAQ, *YX_DAQ DDE, *YX_DDE DDW, *YX_DDW DDA, *YX_DDA DR, *YX_DR;标注修改工具QD, *YX_QD AD, *YX_AD EED, *YX_EED DTH, *YX_DTH UYU, *YX_UYU UYQ, *YX_UYQ DUP, *YX_DUP DAUP, *YX_DAUPDSC, *YX_DSC DTC, *YX_DTC DCC, *YX_DCC DEC, *YX_DEC DG, *YX_DG DTK, *YX_DTK DFZ, *YX_DFZ DAF, *YX_DAF DAZ, *YX_DAZ DDZ, *YX_DDZ SDTA, *YX_SDTA ;标注检查工具CUY, *YX_CUY CDA, *YX_CDA CDD, *YX_CDD CDT, *YX_CDT CDE, *YX_CDE CDS, *YX_CDS ;标注文字工具DTY, *YX_DTY DN, *YX_DN DM, *YX_DM DS1, *YX_DS1 DS2, *YX_DS2D1, *YX_D1D2, *YX_D2D3, *YX_D3D4, *YX_D4D5, *YX_D5D6, *YX_D6D7, *YX_D7D8, *YX_D8D9, *YX_D9AT1, *YX_AT1 AT2, *YX_AT2 AT3, *YX_AT3 DA1, *YX_DA1 DA2, *YX_DA2 DA3, *YX_DA3 DA4, *YX_DA4 DA5, *YX_DA5 DA6, *YX_DA6 DA7, *YX_DA7;倒圆角F, *YX_F FT, *YX_FT F01, *YX_F01 F02, *YX_F02 F03, *YX_F03 F05, *YX_F05 F1, *YX_F1 F2, *YX_F2 F3, *YX_F3 F4, *YX_F4 F5, *YX_F5 F6, *YX_F6 F7, *YX_F7 F8, *YX_F8 F9, *YX_F9 F10, *YX_F10 F20, *YX_F20 F30, *YX_F30 F50, *YX_F50 ;倒角G, *YX_G GT, *YX_GT G01, *YX_G01 G02, *YX_G02 G03, *YX_G03 G05, *YX_G05 G1, *YX_G1 G2, *YX_G2 G3, *YX_G3 G4, *YX_G4 G5, *YX_G5 G6, *YX_G6 G7, *YX_G7 G8, *YX_G8 G9, *YX_G9 G10, *YX_G10 G12, *YX_G12 G20, *YX_G20 G30, *YX_G30 G50, *YX_G50 ;延长Y, *YX_YY02, *YX_Y02Y03, *YX_Y03Y05, *YX_Y05Y1, *YX_Y1Y2, *YX_Y2Y3, *YX_Y3Y4, *YX_Y4Y5, *YX_Y5Y6, *YX_Y6Y7, *YX_Y7Y8, *YX_Y8Y9, *YX_Y9Y10, *YX_Y10Y12, *YX_Y12Y20, *YX_Y20Y30, *YX_Y30Y50, *YX_Y50;偏移OO, *YX_OOO01, *YX_O01O02, *YX_O02O03, *YX_O03O05, *YX_O05O1, *YX_O1O2, *YX_O2O3, *YX_O3O4, *YX_O4O5, *YX_O5O6, *YX_O6O7, *YX_O7O8, *YX_O8O9, *YX_O9O10, *YX_O10O12, *YX_O12O20, *YX_O20O30, *YX_O30O50, *YX_O50;燕秀个人习惯的CAD自带命令快捷键;C, *COPY;CD, *CIRCLE;WW, *MIRROR;AA, *MATCHPROP;QQ, *PLOT。
燕秀快捷键
命令参考命令参考---------------------------yx_mlck*选项-------------------------------yx_zdy*新建全部---------------------------yx_newall新建图层---------------------------yx_lay_newall新建文字样式-----------------------yx_newstyle新建标注样式-----------------------yx_newdimsty设置当前线型为公制-----------------yx_stmCAD中毒修复------------------------yx_bdxf打开燕秀工具箱目录-----------------yx_yxml*隐藏对象---------------------------yx_hide取消全部隐藏-----------------------yx_show隐藏同名块-------------------------yx_sb取消块隐藏-------------------------yx_ub隐藏对象到A组----------------------yx_hidea取消A组隐藏------------------------yx_showa隐藏对象到B组----------------------yx_hideb取消B组隐藏------------------------yx_showb*浏览图层---------------------------yx_bl关闭选取图层-----------------------yx_lay_offsel关闭选取外图层---------------------yx_lay_offselo反向关闭图层-----------------------yx_lay_offp打开全部图层-----------------------yx_lay_allon锁定选取图层-----------------------yx_lay_locksel锁定选取外图层---------------------yx_lay_locksell反向锁定图层-----------------------yx_lay_lockp解锁选取图层-----------------------yx_lay_unlocksel解锁全部图层-----------------------yx_lay_allunlock冻结选取图层-----------------------yx_lay_Freezesel冻结选取外图层---------------------yx_lay_Freezeself反向冻结图层-----------------------yx_lay_Freezep解冻全部图层-----------------------yx_lay_allthaw解冻,解锁,打开全部图层-------------yx_lay_alltuo将所有标注改变为dim层--------------yx_lay_dimall将所有标注改变为dim_temp层---------yx_lay_dimtmpall*将对象的图层置为当前---------------yx_ai_molc设置当前图层为center层-------------yx_lay_set_center设置当前图层为cool层---------------yx_lay_set_cool设置当前图层为core层---------------yx_lay_set_core设置当前图层为dim层----------------yx_lay_set_dim设置当前图层为dim_temp层-----------yx_lay_set_dim_temp 设置当前图层为epin层---------------yx_lay_set_epin设置当前图层为from层---------------yx_lay_set_from设置当前图层为hatch层--------------yx_lay_set_hatch设置当前图层为insert层-------------yx_lay_set_insert设置当前图层为lift层---------------yx_lay_set_lift设置当前图层为moldbase层-----------yx_lay_set_moldbase 设置当前图层为part层---------------yx_lay_set_part设置当前图层为runner层-------------yx_lay_set_runner设置当前图层为screw层--------------yx_lay_set_screw设置当前图层为slide层--------------yx_lay_set_slide设置当前图层为sp层-----------------yx_lay_set_sp设置当前图层为spring层-------------yx_lay_set_spring设置当前图层为std层----------------yx_lay_set_std设置当前图层为temp层---------------yx_lay_set_temp设置当前图层为text层---------------yx_lay_set_text*智能中心线-------------------------yx_cen删除重复线-------------------------yx_scf自动调整线型比例-------------------yx_axs整数直线---------------------------yx_ll画剖面线---------------------------yx_sec画截断线---------------------------yx_sx画折断线---------------------------yx_kl画圆柱断面线-----------------------yx_hl画线修剪---------------------------yx_tt直线修剪---------------------------yx_ty连接线段---------------------------yx_ff智能连接---------------------------yx_fd检查线段是否断开-------------------yx_chl样条曲线转圆弧(标注用)-------------yx_as样条曲线转圆弧(线割用)-------------yx_sl直样条曲线转直线(UG图)-------------yx_zs双边偏移---------------------------yx_ou动态拉长---------------------------yx_yl合并线段---------------------------yx_lm直线两端延长-----------------------yx_yt样条曲线去除相切-------------------yx_sts计算多线条的总长度-----------------yx_ln等分线条---------------------------yx_dfx重复打断于点-----------------------yx_break直线交点打断-----------------------yx_ol水平构造线-------------------------yx_hh垂直构造线-------------------------yx_vv直线转构造线-----------------------yx_xc*圆弧转圆---------------------------yx_ac圆数量统计-------------------------yx_ctu圆坐标列表-------------------------yx_cty圆坐标值零数转整数-----------------yx_ec批量修改圆,圆弧半径----------------yx_edr*编辑块-----------------------------yx_eb替换块-----------------------------yx_bg块旋转还原-------------------------yx_bf统计块的数量-----------------------yx_bs块坐标值零数转整数-----------------yx_ec统一块内对象图层-------------------yx_baa统一块内对象颜色-------------------yx_bac复制块内图元-----------------------yx_bc炸开无法分解的块-------------------yx_exb分解含属性的块保持属性值-----------yx_ebt 修改图块名-------------------------yx_bre建立匿名块-------------------------yx_nb匿名块转有名块---------------------yx_bun有名块转匿名块---------------------yx_bnu分解所有组-------------------------yx_eg分解所有匿名组---------------------yx_eug*词库-------------------------------yx_ck文字加框---------------------------yx_jk连续命名---------------------------yx_mj文字批量替换-----------------------yx_wt修改文字高度-----------------------yx_th文字分解<变成线>-------------------yx_txtexp *旋转+1度---------------------------yx_e1旋转-1度---------------------------yx_r1旋转+2度---------------------------yx_e2旋转-2度---------------------------yx_r2旋转+3度---------------------------yx_e3旋转-3度---------------------------yx_r3旋转+45度--------------------------yx_e45旋转-45度--------------------------yx_r45旋转+90度--------------------------yx_e4旋转-90度--------------------------yx_r4旋转+180度-------------------------yx_r5*复制旋转---------------------------yx_cr复制旋转+1度-----------------------yx_ce1复制旋转-1度-----------------------yx_cr1复制旋转+2度-----------------------yx_ce2复制旋转-2度-----------------------yx_cr2复制旋转+3度-----------------------yx_ce3复制旋转-3度-----------------------yx_cr3复制旋转+45度----------------------yx_ce45 复制旋转-45度----------------------yx_cr45复制旋转+90度----------------------yx_ce4复制旋转-90度----------------------yx_cr4复制旋转+180度---------------------yx_cr5*颜色备忘板-------------------------yx_cb改变对象颜色-----------------------yx_cv改变对象颜色为1--------------------yx_c1改变对象颜色为2--------------------yx_c2改变对象颜色为3--------------------yx_c3改变对象颜色为5--------------------yx_c5改变对象颜色为6--------------------yx_c6改变对象颜色为7--------------------yx_c7改变对象颜色为8--------------------yx_c8改变对象颜色为9--------------------yx_c9将对象属性改为该层默认值-----------yx_bylayerobj *改变对象线型比例因子---------------yx_xs改变对象线型为Continuous-----------yx_x1改变对象线型为CENTER---------------yx_x2改变对象线型为HIDDEN---------------yx_x3改变对象线型为DASHED---------------yx_x4改变对象线型为PHANTOM--------------yx_x5改变颜色+线型+线型比例1------------yx_a1改变颜色+线型+线型比例2------------yx_a2改变颜色+线型+线型比例3------------yx_a3改变颜色+线型+线型比例4------------yx_a4改变颜色+线型+线型比例5------------yx_a5*快速旋转---------------------------yx_roo快速复制旋转-----------------------yx_crr视图对齐---------------------------yx_vd保存视图---------------------------yx_vs对象快速过滤-----------------------yx_ew对象匹配过滤-----------------------yx_eq标记选取记号-----------------------yx_bj选取标记后的对象-------------------yx_bx以直线镜像-------------------------yx_ml4分之1镜像-------------------------yx_4mi4分之1复制旋转---------------------yx_4rc画箭头-----------------------------yx_jtZ轴归零----------------------------yx_zg局部对象重生-----------------------yx_regss未知角度转正-----------------------yx_rh相同距离重复拉伸-------------------yx_ss相同比例重复缩放-------------------yx_scc相同角度重复旋转-------------------yx_rr相同距离重复移动-------------------yx_mm相同距离重复复制-------------------yx_cc清理全部垃圾-----------------------yx_pu删除垃圾文件-----------------------yx_lj查找远距离对象---------------------yx_zyt缩放范围清理保存-------------------yx_fs缩放范围清理保存退出---------------yx_fcc*重量计算---------------------------yx_cm斜顶角度计算-----------------------yx_ca承板厚度计算-----------------------yx_cs三板模导柱变形量计算---------------yx_cg*BOM--------------------------------yx_bm球标编号---------------------------yx_qb检查零件干涉-----------------------yx_jg定料尺寸---------------------------yx_dt小标题-----------------------------yx_cj修改版次---------------------------yx_ve局部放大---------------------------yx_jbfd组立图3D输出-----------------------yx_asmout 输入图元自动分层-------------------yx_fc顶针过滤---------------------------yx_ewe顶针数量统计-----------------------yx_etu顶针坐标列表-----------------------yx_ety顶针孔输出清理---------------------yx_exe模仁角避空-------------------------yx_mk*塑料资料---------------------------yx_pi模具钢材资料-----------------------yx_pm AutoCAD使用技巧--------------------yx_pc注塑不良解決方法-------------------yx_pe塑胶模具经典结构-------------------yx_pg塑胶模具设计注意事项---------------yx_py*零件库-----------------------------yx_k模胚-------------------------------yx_mb水路-------------------------------yx_cl顶针-------------------------------yx_et弹簧-------------------------------yx_tf内六角螺丝-------------------------yx_sw定位环/唧咀------------------------yx_sprue热流道-----------------------------yx_hs支撑柱-----------------------------yx_sp斜导柱-----------------------------yx_ag垃圾钉-----------------------------yx_lp限位块-----------------------------yx_xw中托司-----------------------------yx_egp直齿轮-----------------------------yx_ge穿丝孔-----------------------------yx_es其他螺丝---------------------------yx_sw2三板模相关-------------------------yx_sbm*快速标注<加强>---------------------yx_dq线性标注(1)<加强>------------------yx_d线性标注(2)<加强>------------------yx_de对齐标注(1)<加强>------------------yx_dx对齐标注(2)<加强>------------------yx_dw坐标标注<加强>---------------------yx_da半径标注<加强>---------------------yx_ddr直径标注<加强>---------------------yx_dd角度标注<加强>---------------------yx_dv连续标注<加强>---------------------yx_dc基线标注<加强>---------------------yx_db快速引线标注<加强>-----------------yx_q*计算打印区域标注文字高度-----------yx_aq设置当前坐标原点-------------------yx_uy设定放大图原点---------------------yx_uyf设置当前标注文字高度---------------yx_sh智能标注---------------------------yx_n坐标标注+连续标注------------------yx_df表面粗糙度标注---------------------yx_ccd批量坐标标注-----------------------yx_ds坐标标注(单点)---------------------yx_dh引线坐标标注-----------------------yx_daq线性直径标注-----------------------yx_dde对齐直径标注-----------------------yx_ddw批量直径标注+半径标注--------------yx_dda直径标注+半径标注(可加文字)--------yx_dr*尺寸驱动---------------------------yx_qd标注刷子---------------------------yx_ad标注删除---------------------------yx_eed修改标注文字高度-------------------yx_dth修改坐标标注原点-------------------yx_uyu修改引线坐标标注原点---------------yx_uyq修改标注精度-----------------------yx_dup修改角度标注精度-------------------yx_daup修改标注是否消零-------------------yx_dtz修改标注比例因子-------------------yx_dsc修改标注文字颜色-------------------yx_dtc修改尺寸线颜色---------------------yx_dcc修改尺寸界线颜色-------------------yx_dec添加公差---------------------------yx_dg添加标注文字边框-------------------yx_dtk翻转标注文字方向-------------------yx_dfz坐标标注尺寸界线变直---------------yx_daf坐标标注文字重叠整理---------------yx_daz线性标注文字重叠整理---------------yx_ddz解除标注的关联性-------------------yx_dgl将所有标注设置为当前标注样式-------yx_sdta *检查坐标标注原点个数---------------yx_cuy检查坐标标注定义点是否正确---------yx_cda 检查标注点上是否有对象-------------yx_cdd检查全部标注是否有公差-------------yx_cdt检查标注测量值是否被修改-----------yx_cde 检查全部标注的比例因子-------------yx_cds*标注文字还原-----------------------yx_dty文字前加数量-----------------------yx_dn文字前加螺丝数量-------------------yx_dm文字后加拔模斜度<单边>-------------yx_ds1 文字后加拔模斜度<双边>-------------yx_ds2*文字前加%%c------------------------yx_d1文字后加%%d------------------------yx_d2文字前加M--------------------------yx_d3文字后加(ref)----------------------yx_d4文字前加%%p------------------------yx_d5文字前后加()-----------------------yx_d6文字前后加<>-----------------------yx_d7文字后加X45%%D---------------------yx_d8文字后加(NODRAFT)------------------yx_d9*添加文字(自定义1)------------------yx_at1添加文字(自定义2)------------------yx_at2添加文字(自定义3)------------------yx_at3*文字后加(镶针)---------------------yx_da1文字后加(司筒)---------------------yx_da2文字后加(穿丝孔)-------------------yx_da3文字后加(盲孔)---------------------yx_da4文字后加(通孔)---------------------yx_da5文字后加(全周)---------------------yx_da6文字后加(直身)---------------------yx_da7文字后加(无斜度)-------------------yx_da8*创建幻灯文件(改零件库用)-----------yx_newsld DWG文件列表(改零件库用)------------yx_filelst*燕秀模具技术论坛-------------------yx_yxlt燕秀工具帮助-----------------------yx_help关于燕秀工具箱---------------------yx_about返回首页硬度換算公式:1.肖氏硬度(HS)=勃式硬度(BHN)/10+122.肖式硬度(HS)=洛式硬度(HRC)+153.勃式硬度(BHN)= 维式硬度(HV)4.洛式硬度(HRC)= 勃式硬度(BHN)/10-3硬度測定範圍:HS<100HB<500HRC<70HV<1300(80~88)HRA, (85~95)HRB, (20~70)HRC洛氏硬度中HRA、HRB、HRC等中的A、B、C为三种不同的标准，称为标尺A、标尺B、标尺C。
燕秀快捷键
快捷键说明：要简化燕秀工具箱的命令名(例如：将et 代替yx_et 来启动“顶针”命令)请将(et, *yx_et)不含括号添加到AutoCAD的ACAD.PGP文件中(用yx_editpgp命令可打开ACAD.PGP)，详情请看yanxiu.pgp文件内说明或AutoCAD的帮助**命令参考---------------------------yx_mlck*选项-------------------------------yx_zdy*新建全部---------------------------yx_newall新建图层---------------------------yx_lay_newall新建文字样式-----------------------yx_newstyle新建标注样式-----------------------yx_newdimsty设置当前线型为公制-----------------yx_stmCAD中毒修复------------------------yx_bdxf打开燕秀工具箱目录-----------------yx_yxml*隐藏对象---------------------------yx_hide取消全部隐藏-----------------------yx_show隐藏同名块-------------------------yx_sb取消块隐藏-------------------------yx_ub隐藏对象到A组----------------------yx_hidea取消A组隐藏------------------------yx_showa隐藏对象到B组----------------------yx_hideb取消B组隐藏------------------------yx_showb*浏览图层---------------------------yx_bl关闭选取图层-----------------------yx_lay_offsel关闭选取外图层---------------------yx_lay_offselo反向关闭图层-----------------------yx_lay_offp打开全部图层-----------------------yx_lay_allon锁定选取图层-----------------------yx_lay_locksel锁定选取外图层---------------------yx_lay_locksell反向锁定图层-----------------------yx_lay_lockp解锁选取图层-----------------------yx_lay_unlocksel解锁全部图层-----------------------yx_lay_allunlock冻结选取图层-----------------------yx_lay_Freezesel冻结选取外图层---------------------yx_lay_Freezeself反向冻结图层-----------------------yx_lay_Freezep解冻全部图层-----------------------yx_lay_allthaw解冻,解锁,打开全部图层-------------yx_lay_alltuo将所有标注改变为dim层--------------yx_lay_dimall将所有标注改变为dim_temp层---------yx_lay_dimtmpall*将对象的图层置为当前---------------yx_ai_molc设置当前图层为center层-------------yx_lay_set_center设置当前图层为cool层---------------yx_lay_set_cool设置当前图层为core层---------------yx_lay_set_core设置当前图层为dim层----------------yx_lay_set_dim设置当前图层为dim_temp层-----------yx_lay_set_dim_temp 设置当前图层为epin层---------------yx_lay_set_epin设置当前图层为from层---------------yx_lay_set_from设置当前图层为hatch层--------------yx_lay_set_hatch设置当前图层为insert层-------------yx_lay_set_insert设置当前图层为lift层---------------yx_lay_set_lift设置当前图层为moldbase层-----------yx_lay_set_moldbase 设置当前图层为part层---------------yx_lay_set_part设置当前图层为runner层-------------yx_lay_set_runner设置当前图层为screw层--------------yx_lay_set_screw设置当前图层为slide层--------------yx_lay_set_slide设置当前图层为sp层-----------------yx_lay_set_sp设置当前图层为spring层-------------yx_lay_set_spring设置当前图层为std层----------------yx_lay_set_std设置当前图层为temp层---------------yx_lay_set_temp设置当前图层为text层---------------yx_lay_set_text*智能中心线-------------------------yx_cen删除重复线-------------------------yx_scf自动调整线型比例-------------------yx_axs整数直线---------------------------yx_ll画剖面线---------------------------yx_sec画截断线---------------------------yx_sx画折断线---------------------------yx_kl画圆柱断面线-----------------------yx_hl画线修剪---------------------------yx_tt直线修剪---------------------------yx_ty连接线段---------------------------yx_ff智能连接---------------------------yx_fd检查线段是否断开-------------------yx_chl样条曲线转圆弧(标注用)-------------yx_as样条曲线转圆弧(线割用)-------------yx_sl直样条曲线转直线(UG图)-------------yx_zs双边偏移---------------------------yx_ou动态拉长---------------------------yx_yl合并线段---------------------------yx_lm直线两端延长-----------------------yx_yt样条曲线去除相切-------------------yx_sts计算多线条的总长度-----------------yx_ln等分线条---------------------------yx_dfx重复打断于点-----------------------yx_break直线交点打断-----------------------yx_ol水平构造线-------------------------yx_hh垂直构造线-------------------------yx_vv直线转构造线-----------------------yx_xc*圆弧转圆---------------------------yx_ac圆数量统计-------------------------yx_ctu圆坐标列表-------------------------yx_cty圆坐标值零数转整数-----------------yx_ec批量修改圆,圆弧半径----------------yx_edr *编辑块-----------------------------yx_eb替换块-----------------------------yx_bg块旋转还原-------------------------yx_bf统计块的数量-----------------------yx_bs修改块插入基点---------------------yx_bi块坐标值零数转整数-----------------yx_ec统一块内对象图层-------------------yx_baa统一块内对象颜色-------------------yx_bac复制块内图元-----------------------yx_bc炸开无法分解的块-------------------yx_exb分解含属性的块保持属性值-----------yx_ebt 修改图块名-------------------------yx_bre建立匿名块-------------------------yx_nb匿名块转有名块---------------------yx_bun有名块转匿名块---------------------yx_bnu分解所有组-------------------------yx_eg分解所有匿名组---------------------yx_eug*词库-------------------------------yx_ck文字加框---------------------------yx_jk连续命名---------------------------yx_mj文字批量替换-----------------------yx_wt修改文字高度-----------------------yx_th文字分解<变成线>-------------------yx_txtexp *旋转+1度---------------------------yx_e1旋转-1度---------------------------yx_r1旋转+2度---------------------------yx_e2旋转-2度---------------------------yx_r2旋转+3度---------------------------yx_e3旋转-3度---------------------------yx_r3旋转+45度--------------------------yx_e45旋转-45度--------------------------yx_r45旋转+90度--------------------------yx_e4旋转-90度--------------------------yx_r4旋转+180度-------------------------yx_r5*复制旋转---------------------------yx_cr复制旋转+1度-----------------------yx_ce1复制旋转-1度-----------------------yx_cr1复制旋转+2度-----------------------yx_ce2复制旋转-2度-----------------------yx_cr2复制旋转+3度-----------------------yx_ce3复制旋转-3度-----------------------yx_cr3复制旋转+45度----------------------yx_ce45 复制旋转-45度----------------------yx_cr45复制旋转+90度----------------------yx_ce4复制旋转-90度----------------------yx_cr4复制旋转+180度---------------------yx_cr5颜色备忘板-------------------------yx_cb改变对象颜色-----------------------yx_cv改变对象颜色为1--------------------yx_c1改变对象颜色为2--------------------yx_c2改变对象颜色为3--------------------yx_c3改变对象颜色为4--------------------yx_c4改变对象颜色为5--------------------yx_c5改变对象颜色为6--------------------yx_c6改变对象颜色为7--------------------yx_c7改变对象颜色为8--------------------yx_c8改变对象颜色为9--------------------yx_c9将对象属性改为该层默认值-----------yx_bylayerobj *改变对象线型比例因子---------------yx_xs改变对象线型为Continuous-----------yx_x1改变对象线型为CENTER---------------yx_x2改变对象线型为HIDDEN---------------yx_x3改变对象线型为DASHED---------------yx_x4改变对象线型为PHANTOM--------------yx_x5改变颜色+线型+线型比例1------------yx_a1改变颜色+线型+线型比例2------------yx_a2改变颜色+线型+线型比例3------------yx_a3改变颜色+线型+线型比例4------------yx_a4改变颜色+线型+线型比例5------------yx_a5*快速旋转---------------------------yx_roo快速复制旋转-----------------------yx_crr视图对齐---------------------------yx_vd保存视图---------------------------yx_vs对象快速过滤-----------------------yx_ew对象匹配过滤-----------------------yx_eq标记选取记号-----------------------yx_bj选取标记后的对象-------------------yx_bx以直线镜像-------------------------yx_ml4分之1镜像-------------------------yx_4mi4分之1复制旋转---------------------yx_4rc画箭头-----------------------------yx_jtZ轴归零----------------------------yx_zg局部对象重生-----------------------yx_regss未知角度转正-----------------------yx_rh相同距离重复拉伸-------------------yx_ss相同比例重复缩放-------------------yx_scc相同角度重复旋转-------------------yx_rr相同距离重复移动-------------------yx_mm相同距离重复复制-------------------yx_cc清理全部垃圾-----------------------yx_pu删除垃圾文件-----------------------yx_lj查找远距离对象---------------------yx_zyt缩放范围清理保存-------------------yx_fs缩放范围清理保存退出---------------yx_fcc重量计算---------------------------yx_cm斜顶角度计算-----------------------yx_ca承板厚度计算-----------------------yx_cs三板模导柱变形量计算---------------yx_cg*BOM--------------------------------yx_bm球标编号---------------------------yx_qb检查零件干涉-----------------------yx_jg定料尺寸---------------------------yx_dt小标题-----------------------------yx_cj修改版次---------------------------yx_ve局部放大---------------------------yx_jbfd组立图3D输出-----------------------yx_asmout 输入图元自动分层-------------------yx_fc顶针过滤---------------------------yx_ewe顶针数量统计-----------------------yx_etu顶针坐标列表-----------------------yx_ety顶针孔输出清理---------------------yx_exe模仁角避空-------------------------yx_mk*塑料资料---------------------------yx_pi模具钢材资料-----------------------yx_pm AutoCAD使用技巧--------------------yx_pc注塑不良解決方法-------------------yx_pe塑胶模具经典结构-------------------yx_pg塑胶模具设计注意事项---------------yx_py*零件库-----------------------------yx_k模胚-------------------------------yx_mb水路-------------------------------yx_cl顶针-------------------------------yx_et弹簧-------------------------------yx_tf内六角螺丝-------------------------yx_sw定位环/唧咀------------------------yx_sprue热流道-----------------------------yx_hs支撑柱-----------------------------yx_sp斜导柱-----------------------------yx_ag垃圾钉-----------------------------yx_lp限位块-----------------------------yx_xw中托司-----------------------------yx_egp直齿轮-----------------------------yx_ge穿丝孔-----------------------------yx_es其他螺丝---------------------------yx_sw2三板模相关-------------------------yx_sbm*快速标注<加强>---------------------yx_dq线性标注(1)<加强>------------------yx_d线性标注(2)<加强>------------------yx_de对齐标注(1)<加强>------------------yx_dx对齐标注(2)<加强>------------------yx_dw坐标标注<加强>---------------------yx_da半径标注<加强>---------------------yx_ddr直径标注<加强>---------------------yx_dd角度标注<加强>---------------------yx_dv连续标注<加强>---------------------yx_dc基线标注<加强>---------------------yx_db快速引线标注<加强>-----------------yx_q*计算打印区域标注文字高度-----------yx_aq设置当前坐标原点-------------------yx_uy设定放大图原点---------------------yx_uyf设置当前标注文字高度---------------yx_sh智能标注---------------------------yx_n坐标标注+连续标注------------------yx_df表面粗糙度标注---------------------yx_ccd批量坐标标注-----------------------yx_ds坐标标注(单点)---------------------yx_dh引线坐标标注-----------------------yx_daq线性直径标注-----------------------yx_dde对齐直径标注-----------------------yx_ddw批量直径标注+半径标注--------------yx_dda直径标注+半径标注(可加文字)--------yx_dr*尺寸驱动---------------------------yx_qd标注刷子---------------------------yx_ad标注删除---------------------------yx_eed修改标注文字高度-------------------yx_dth修改坐标标注原点-------------------yx_uyu修改引线坐标标注原点---------------yx_uyq修改标注精度-----------------------yx_dup修改角度标注精度-------------------yx_daup修改标注是否消零-------------------yx_dtz修改标注比例因子-------------------yx_dsc修改标注文字颜色-------------------yx_dtc修改尺寸线颜色---------------------yx_dcc修改尺寸界线颜色-------------------yx_dec添加公差---------------------------yx_dg添加标注文字边框-------------------yx_dtk翻转标注文字方向-------------------yx_dfz坐标标注尺寸界线变直---------------yx_daf坐标标注文字重叠整理---------------yx_daz线性标注文字重叠整理---------------yx_ddz解除标注的关联性-------------------yx_dgl将所有标注设置为当前标注样式-------yx_sdta *检查坐标标注原点个数---------------yx_cuy检查坐标标注定义点是否正确---------yx_cda 检查标注点上是否有对象-------------yx_cdd检查全部标注是否有公差-------------yx_cdt检查标注测量值是否被修改-----------yx_cde 检查全部标注的比例因子-------------yx_cds*标注文字还原-----------------------yx_dty文字前加数量-----------------------yx_dn文字前加螺丝数量-------------------yx_dm文字后加拔模斜度<单边>-------------yx_ds1文字后加拔模斜度<双边>-------------yx_ds2*文字前加%%c------------------------yx_d1文字后加%%d------------------------yx_d2文字前加M--------------------------yx_d3文字后加(ref)----------------------yx_d4文字前加%%p------------------------yx_d5文字前后加()-----------------------yx_d6文字前后加<>-----------------------yx_d7文字后加X45%%D---------------------yx_d8文字后加(NODRAFT)------------------yx_d9*添加文字(自定义1)------------------yx_at1添加文字(自定义2)------------------yx_at2添加文字(自定义3)------------------yx_at3*文字后加(镶针)---------------------yx_da1文字后加(司筒)---------------------yx_da2文字后加(穿丝孔)-------------------yx_da3文字后加(盲孔)---------------------yx_da4文字后加(通孔)---------------------yx_da5文字后加(全周)---------------------yx_da6文字后加(直身)---------------------yx_da7文字后加(无斜度)-------------------yx_da8*创建幻灯文件(改零件库用)-----------yx_newsld DWG文件列表(改零件库用)------------yx_filelst *燕秀模具技术论坛-------------------yx_yxlt燕秀工具帮助-----------------------yx_help关于燕秀工具箱---------------------yx_about。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
下面是燕秀工具箱快捷键定义方法，文档下方有快捷键功能介绍，和整理好的的快键键1装完燕秀工具箱的CAD打开后会处出现燕秀工具条2.单击点击CAD中出现的燕秀工具条会出一选择界面，第二项现环境设置，3鼠标移动到上面会出先另一选择界面，点击自定义快捷键弹出下面图框，里面介绍可以看一下，看不懂也没关系，不用管它直接点确定弹出下面TXT文本，这里面都是CAD自带快捷命令什么都不要动，否则会带导致CAD中自带快捷命令有些就不能用了，4拖动滚动条到最下面，No xlate ; DO NOT REMOVE到此处就把你想要的快捷指令复制进来关闭，保存5，上面的做完后要重新加载快捷键，方法如下：a单击点击CAD中出现的燕秀工具条会出一选择界面，b鼠标移动到第二项环境设置出现选择框，点击重新加载快捷键文件（R），到此处快捷键加载就完成了。
下面是快捷键所表达的功能MLCK, *YX_MLCK;环境设置NA, *YX_NEWALL 新建全部NL, *YX_LAY_NEWALL 新建常用图层NS, *YX_NEWSTYLE 新建常用文字样式ND, *YX_NEWDIMSTY 新建YanXiu标注样式STM, *YX_STM 设置当前线型为公制;隐藏工具HY, *YX_HIDE 隐藏对象HU, *YX_SHOW 取消全部隐藏H6, *YX_HIDEA 隐藏对象到 A 组U6, *YX_SHOWA 取消 A 组隐藏H7, *YX_HIDEB 隐藏对象到 B 组U7, *YX_SHOWB 取消 B 组隐藏;图层工具BL, *YX_BL 浏览图层LO, *YX_LAY_OFFSEL 关闭选取图层LOO, *YX_LAY_OFFSELO 关闭选取以外的图层LOP, *YX_LAY_OFFP 反向关闭图层LUO, *YX_LAY_ALLON 全部图层已打开LL, *YX_LAY_LOCKSEL 锁定选取图层LLL, *YX_LAY_LOCKSELL 锁定选取以外的图层LLP, *YX_LAY_LOCKP 反向锁定图层LLU, *YX_LAY_UNLOCKSEL 解锁选取图层LUL, *YX_LAY_ALLUNLOCK 全部图层已解锁LF, *YX_LAY_FREEZESEL 冻结选取图层LFF, *YX_LAY_FREEZESELF 冻结选取以外的图层LFP, *YX_LAY_FREEZEP 反向冻结图层LUF, *YX_LAY_ALLTHAW 全部图层已解冻LUU, *YX_LAY_ALLTUO 全部图层已解冻,解锁,打开KDA, *YX_LAY_DIMALL 将所有标注改变为dim层KDTA, *YX_LAY_DIMTMPALL;设置当前图层AI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER 中心线层LCO, *YX_LAY_SET_COOL 水路层LCR, *YX_LAY_SET_CORE 模仁层LD, *YX_LAY_SET_DIM 标注层LDT, *YX_LAY_SET_DIM_TEMP 临时标注层LE, *YX_LAY_SET_EPIN 顶针层LFR, *YX_LAY_SET_FROMAT 产品层LH, *YX_LAY_SET_HATCH 填充层LI, *YX_LAY_SET_INSERT 镶件层LA, *YX_LAY_SET_LIFE 斜顶层LM, *YX_LAY_SET_MOLDBASE 模胚层LP, *YX_LAY_SET_PART 产品层LR, *YX_LAY_SET_RUNNER 流道层LS, *YX_LAY_SET_SCREW 螺丝层LSL, *YX_LAY_SET_SLIDE 滑块层LSP, *YX_LAY_SET_SP 撑头层LST, *YX_LAY_SET_STD 标准件层LSR, *YX_LAY_SET_SPRING 弹弓层LTE, *YX_LAY_SET_TEMP 临时层LT, *YX_LAY_SET_TEXT 文字层;线工具CE, *YX_CEN 智能中心线AXS, *YX_AXS 自动调整线型比例SEC, *YX_SEC 画剖面线SX, *YX_SX 画截断线KL, *YX_KL 画截断线HL, *YX_HL 画截断线TT, *YX_TT 画线修剪TY, *YX_TY 直线修剪FF, *YX_FF 连接线段FD, *YX_FD 智能连接CHL, *YX_CHL 检查线段是否断开AS, *YX_AS 不规则圆弧修正SL, *YX_SL 样条曲线转圆弧(线割用) OU, *YX_OU 双边偏移YL, *YX_YL 动态拉长LLM, *YX_LM 合并线段YT, *YX_YT 直线两端延长STS, *YX_STS 样条曲线去除相切LN, *YX_LN 计算多线条的总长度DFX, *YX_DFX 等分线条BN, *YX_BREAK 重复打断于点OL, *YX_OL 直线交点打断HH, *YX_HH 垂直构造线VV, *YX_VV 水平构造线XC, *YX_XC 直线转构造线;圆工具AC, *YX_AC 圆弧转圆CTY, *YX_CTY 圆坐标列表CTU, *YX_CTU 圆数量统计ER, *YX_EDR 批量修改圆,圆弧半径;块工具EB, *YX_EB 编辑块BG, *YX_BG 替换块BF, *YX_BF 块旋转还原BS, *YX_BS 统计块的数量EC, *YX_EC 坐标值零数转整数(整理顶针) BC, *YX_BC 复制块内图元EBT, *YX_EBT 分解含属性的块保持属性值BRE, *YX_BRE 修改图块名NB, *YX_NB 建立匿名块BUN, *YX_BUN 匿名块转有名块BNU, *YX_BNU 有名块转匿名块EG, *YX_EG 分解所有组EUG, *YX_EUG 分解所有匿名组;旋转E1, *YX_E1 旋转 +1 度R1, *YX_R1 旋转 -1 度E2, *YX_E2 旋转 +2 度R2, *YX_R2 旋转 -2 度E3, *YX_E3 旋转 +3 度R3, *YX_R3 旋转 -3 度E45, *YX_E45 旋转 +45 度R45, *YX_R45 旋转 -45度E4, *YX_E4 旋转 +90 度R4, *YX_R4 旋转 -90 度R5, *YX_R5 旋转 +180 度;旋转复制CR, *YX_CR 旋转复制CE1, *YX_CE1 旋转复制+1 度CR1, *YX_CR1 旋转复制-1 度CE2, *YX_CE2 旋转复制+2 度CR2, *YX_CR2 旋转复制-2 度CE3, *YX_CE3 旋转复制+3 度CR3, *YX_CR3 旋转复制-3 度CE45, *YX_CE45 旋转复制+45 度CR45, *YX_CR45 旋转复制-45度CE4, *YX_CE4 旋转复制+90 度CR4, *YX_CR4 旋转复制-90 度CR5, *YX_CR5 旋转复制+180 度;颜色工具CV, *YX_CV 改变对象颜色C1, *YX_C1 改变对象颜色为红色C2, *YX_C2 改变对象颜色为黄色C3, *YX_C3 改变对象颜色为绿色C4, *YX_C4 改变对象颜色为青色C5, *YX_C5 改变对象颜色为蓝色C6, *YX_C6 改变对象颜色为洋红C7, *YX_C7 改变对象颜色为白色C8, *YX_C8 改变对象颜色为灰色C9, *YX_C9 改变对象颜色为浅灰色KBL, *YX_BYLAYEROBJ 将对象属性改为该层默认值XS, *YX_XS 改变对象线型比例因子X1, *YX_X1 改变对象线型为 Continuous X2, *YX_X2 改变对象线型为 CENTERX3, *YX_X3 改变对象线型为 HIDDENX4, *YX_X4 改变对象线型为 CENTERX5, *YX_X5 改变对象线型为 PHANTOM A1, *YX_A1 改变线性+颜色+比例1A2, *YX_A2 改变线性+颜色+比例2A3, *YX_A3 改变线性+颜色+比例3A4, *YX_A4 改变线性+颜色+比例4A5, *YX_A5 改变线性+颜色+比例5;常用工具VS, *YX_VS 保存视图EW, *YX_EW 对象快速过滤EQ, *YX_EQ 对象匹配过滤ML, *YX_ML 以直线镜像4MI, *YX_4MI 4分之1镜像4RC, *YX_4RC 4分之1旋转复制JT, *YX_JT 画箭头REGSS, *YX_REGSS 局部对象重生RH, *YX_RH 未知角度转正SS, *YX_SS 相同比例重复缩放RR, *YX_RR 相同角度重复旋转MM, *YX_MM 相同距离重复移动CC, *YX_CC 相同距离重复复制PU, *YX_PU 清理全部垃圾LJ, *YX_LJ 删除垃圾文件FS, *YX_FS 清理保存FCC, *YX_FCC 清理保存退出;文字工具CK, *YX_CK 词库MJ, *YX_MJ 连续命名TH, *YX_TH 修改文字高度TE, *YX_TXTEXP 文字分解;计算工具CM, *YX_CM 重量计算CA, *YX_CA 斜顶角度计算CS, *YX_CS 承板厚度计算CG, *YX_CG 三板模导柱变形量计算;模具工具BM, *YX_BM BOMDT, *YX_DT 定料尺寸CJ, *YX_CJ 小标题VE, *YX_VE 修改版次JB, *YX_JBFD 局部放大AU, *YX_ASMOUT 组立图3D输出EWE, *YX_EWE 顶针过滤ETU, *YX_ETU 顶针数量统计ETY, *YX_ETY 顶针坐标列表EXE, *YX_EXE 顶针孔输出清理MK, *YX_MK 模仁角避空;模具资料PI, *YX_PI 塑料资料PM, *YX_PM 模具钢材资料PC, *YX_PC AutoCAD使用技巧PE, *YX_PE 注塑不良解決方法PG, *YX_PG 塑胶模具经典结构PY, *YX_PY 塑胶模具设计注意事项;模具标准件K, *YX_K 零件库MB, *YX_MB 模胚CL, *YX_CL 水路ET, *YX_ET 顶针TF, *YX_TF 弹簧SW, *YX_SW 内六角螺丝SR, *YX_SPRUE 定位环/唧咀HS, *YX_HS 热流道SP, *YX_SP 支撑柱AG, *YX_AG 斜导柱LP, *YX_LP 垃圾钉XW, *YX_XW 限位块EGP, *YX_EGP 顶针板导柱GE, *YX_GE 直齿轮ES, *YX_ES 穿丝孔SW2, *YX_SW2 其他螺丝SBM, *YX_SBM 三板模相关;标注加强工具DQ, *YX_DQ 快速标注D, *YX_D 线性标注DE, *YX_DE 线性标注(2)DX, *YX_DX 对齐标注(1)DW, *YX_DW 对齐标注(2)DA, *YX_DA 坐标标注DDR, *YX_DDR 半径标注DD, *YX_DD 直径标注DV, *YX_DV 角度标注DC, *YX_DC 连续标注DB, *YX_DB 基线标注Q, *YX_Q 快速引线标注;标注超强工具AQ, *YX_AQ 计算打印区域标注文字高度UY, *YX_UY 设置当前坐标原点SH, *YX_SH 设置当前标注文字高度N, *YX_N 智能标注DF, *YX_DF 坐标标注+连续标注CCD, *YX_CCD 表面粗糙度标注DS, *YX_DS 批量坐标标注DH, *YX_DH 坐标标注(单点)DAQ, *YX_DAQ 引线坐标标注DDE, *YX_DDE 线性直径标注DDW, *YX_DDW 对齐直径标注DDA, *YX_DDA 批量直径标注+半径标注DR, *YX_DR 直径标注+半径标注(可添加文字);标注修改工具AD, *YX_AD 标注刷子EED, *YX_EED 标注删除DTH, *YX_DTH 修改标注文字高度UYU, *YX_UYU 修改坐标标注原点UYQ, *YX_UYQ 修改引线坐标标注原点DUP, *YX_DUP 修改标注精度DAUP, *YX_DAUP 修改角度标注精度DTZ, *YX_DTZ 修改标注是否消零DSC, *YX_DSC 修改标注比例因子DTC, *YX_DTC 修改标注文字颜色DCC, *YX_DCC 修改尺寸线颜色DEC, *YX_DEC 修改尺寸界线颜色DG, *YX_DG 添加公差DTK, *YX_DTK 添加标注文字边框DFZ, *YX_DFZ 翻转标注文字方向DAF, *YX_DAF 坐标标注尺寸界线变直DAZ, *YX_DAZ 坐标标注文字重叠整理DDZ, *YX_DDZ 线性标注文字重叠整理SDTA, *YX_SDTA 所有标注已改变到当前标注样式;标注检查工具CUY, *YX_CUY 检查坐标标注原点个数CDA, *YX_CDA 检查坐标标注定义点是否正确CDT, *YX_CDT 检查全部标注是否有公差CDE, *YX_CDE 检查标注测量值是否被修改CDS, *YX_CDS 检查全部标注的比例因子;标注文字工具DTY, *YX_DTY 标注文字还原DN, *YX_DN 文字前加数量DM, *YX_DM 文字前加螺丝数量DS1, *YX_DS1 文字后加拔模斜度<单边>DS2, *YX_DS2 文字后加拔模斜度<双边>D1, *YX_D1 文字前加 %%cD2, *YX_D2 文字后加 %%dD3, *YX_D3 文字前加 MD4, *YX_D4 文字后加 (ref)D5, *YX_D5 文字前加 %%pD6, *YX_D6 文字前后加 ()D7, *YX_D7 文字前后加 <>D8, *YX_D8 文字后加 X45%%DD9, *YX_D9 文字后加 (NO DRAFT)DA1, *YX_DA1 文字后加 (镶针)DA2, *YX_DA2 文字后加 (司筒)DA3, *YX_DA3 文字后加 (穿丝孔)DA4, *YX_DA4 文字后加 (盲孔)DA5, *YX_DA5 文字后加 (通孔)DA6, *YX_DA6 文字后加 (全周)DA7, *YX_DA7 文字后加 (直身)DA8, *YX_DA8 文字后加 (无斜度);倒圆角F, *YX_F 倒圆角FT, *YX_FT 倒圆角<不剪切> F01, *YX_F01F02, *YX_F02F05, *YX_F05F1, *YX_F1F2, *YX_F2F3, *YX_F3F4, *YX_F4F5, *YX_F5F6, *YX_F6F7, *YX_F7F8, *YX_F8F9, *YX_F9F10, *YX_F10F12, *YX_F12F20, *YX_F20F30, *YX_F30F50, *YX_F50;倒角G, *YX_G 倒角<剪切> GT, *YX_GT 倒角<不剪切> G01, *YX_G01G02, *YX_G02G03, *YX_G03G1, *YX_G1G2, *YX_G2G3, *YX_G3G4, *YX_G4G5, *YX_G5G6, *YX_G6G7, *YX_G7G8, *YX_G8G9, *YX_G9G10, *YX_G10G12, *YX_G12G20, *YX_G20G30, *YX_G30G50, *YX_G50;延长Y, *YX_Y 延长Y01, *YX_Y01Y02, *YX_Y02Y03, *YX_Y03Y05, *YX_Y05Y1, *YX_Y1Y3, *YX_Y3Y4, *YX_Y4Y5, *YX_Y5Y6, *YX_Y6Y7, *YX_Y7Y8, *YX_Y8Y9, *YX_Y9Y10, *YX_Y10Y12, *YX_Y12Y20, *YX_Y20Y30, *YX_Y30Y50, *YX_Y50;偏移OO, *YX_OO 偏移O01, *YX_O01O02, *YX_O02O03, *YX_O03O05, *YX_O05O1, *YX_O1O2, *YX_O2O3, *YX_O3O5, *YX_O5O6, *YX_O6O7, *YX_O7O8, *YX_O8O9, *YX_O9O10, *YX_O10O12, *YX_O12O20, *YX_O20O30, *YX_O30O50, *YX_O50;CAD自带命令;C, *COPY;CD, *CIRCLE;WW, *MIRROR;AA, *MATCHPROP;QQ, *PLOT;CCA, *CLOSEALL上面的命令可以选择自己想要的命令，（后面汉字要删除），到CAD中若果不想自己整理下面是燕秀的全部快捷指令，，直接复制到上面所讲的TXT文本中就行，下面的快捷指令都是上面叙述的，不知快捷键的功能，可以参照上面，指令后面的文字解释NA, *YX_NEWALLNL, *YX_LAY_NEWALL NS, *YX_NEWSTYLE ND, *YX_NEWDIMSTY STM, *YX_STMXF, *YX_BDXFYM, *YX_YXMLHY, *YX_HIDEHU, *YX_SHOWHB, *YX_HBUB, *YX_UBH6, *YX_HIDEAU6, *YX_SHOWAH7, *YX_HIDEBU7, *YX_SHOWBBL, *YX_BLLO, *YX_LAY_OFFSEL LOO, *YX_LAY_OFFSELO LOP, *YX_LAY_OFFP LUO, *YX_LAY_ALLON Lk, *YX_LAY_LOCKSEL Lkk, *YX_LAY_LOCKSELLLkP, *YX_LAY_LOCKPLkU, *YX_LAY_UNLOCKSEL LUL, *YX_LAY_ALLUNLOCK LF, *YX_LAY_FREEZESEL LFF, *YX_LAY_FREEZESELF LFP, *YX_LAY_FREEZEP LUF, *YX_LAY_ALLTHAW LUU, *YX_LAY_ALLTUO KDA, *YX_LAY_DIMALL KDTA, *YX_LAY_DIMTMPALLAI_MOLC, *YX_AI_MOLCLC, *YX_LAY_SET_CENTER LCO, *YX_LAY_SET_COOL LCR, *YX_LAY_SET_CORE LD, *YX_LAY_SET_DIM LDT, *YX_LAY_SET_DIM_TEMP LE, *YX_LAY_SET_EPIN LFR, *YX_LAY_SET_FROM LH, *YX_LAY_SET_HATCH LI, *YX_LAY_SET_INSERT LA, *YX_LAY_SET_LIFT LM, *YX_LAY_SET_MOLDBASELP, *YX_LAY_SET_PART LR, *YX_LAY_SET_RUNNER LS, *YX_LAY_SET_SCREW LSL, *YX_LAY_SET_SLIDE LSP, *YX_LAY_SET_SP LST, *YX_LAY_SET_STD LSR, *YX_LAY_SET_SPRING LTE, *YX_LAY_SET_TEMP LT, *YX_LAY_SET_TEXT CE, *YX_CENSCF, *YX_SCFAXS, *YX_AXSLL, *YX_LLSEC, *YX_SECSX, *YX_SXKL, *YX_KLHL, *YX_HLTT, *YX_TTTY, *YX_TYFF, *YX_FFFD, *YX_FDCHL, *YX_CHLSL, *YX_SL ZS, *YX_ZS OU, *YX_OU YL, *YX_YL LLM, *YX_LM YT, *YX_YT STS, *YX_STS LN, *YX_LN DFX, *YX_DFX BN, *YX_BREAK OL, *YX_OL HH, *YX_HH VV, *YX_VV XC, *YX_XC AC, *YX_AC CTY, *YX_CTY CTU, *YX_CTU ER, *YX_EDR EB, *YX_EB BG, *YX_BG BF, *YX_BFBI, *YX_BI EC, *YX_EC BAA, *YX_BAA BAC, *YX_BAC BC, *YX_BC EXB, *YX_EXB EBT, *YX_EBT BRE, *YX_BRE NB, *YX_NB BUN, *YX_BUN BNU, *YX_BNU EG, *YX_EG EUG, *YX_EUG CK, *YX_CK JK, *YX_JK MJ, *YX_MJ WT, *YX_WT TH, *YX_TH TE, *YX_TXTEXP E1, *YX_E1R1, *YX_R1R2, *YX_R2E3, *YX_E3R3, *YX_R3E45, *YX_E45 R45, *YX_R45 E4, *YX_E4R4, *YX_R4R5, *YX_R5 CR, *YX_CR CE1, *YX_CE1 CR1, *YX_CR1 CE2, *YX_CE2 CR2, *YX_CR2 CE3, *YX_CE3 CR3, *YX_CR3 CE45, *YX_CE45 CR45, *YX_CR45 CE4, *YX_CE4 CR4, *YX_CR4 CR5, *YX_CR5 CB, *YX_CBC1, *YX_C1C2, *YX_C2C3, *YX_C3C4, *YX_C4C5, *YX_C5C6, *YX_C6C7, *YX_C7C8, *YX_C8C9, *YX_C9KBL, *YX_BYLAYEROBJ XS, *YX_XSX1, *YX_X1X2, *YX_X2X3, *YX_X3X4, *YX_X4X5, *YX_X5A1, *YX_A1A2, *YX_A2A3, *YX_A3A4, *YX_A4A5, *YX_A5CRR, *YX_CRR VD, *YX_VD VS, *YX_VS EW, *YX_EW EQ, *YX_EQ BJ, *YX_BJ BX, *YX_BX ML, *YX_ML4MI, *YX_4MI4RC, *YX_4RC JT, *YX_JT ZG, *YX_ZG REGSS, *YX_REGSS RH, *YX_RH SS, *YX_SS SCC, *YX_SCC RR, *YX_RR MM, *YX_MM CC, *YX_CC PU, *YX_PU LJ, *YX_LJFS, *YX_FS FCC, *YX_FCC CM, *YX_CM CA, *YX_CA CS, *YX_CS CG, *YX_CG BM, *YX_BM QB, *YX_QB JG, *YX_JG DT, *YX_DT CJ, *YX_CJ VE, *YX_VE JB, *YX_JBFD AU, *YX_ASMOUT FC, *YX_FC EWE, *YX_EWE ETU, *YX_ETU ETY, *YX_ETY EXE, *YX_EXE MK, *YX_MK PI, *YX_PIPC, *YX_PC PE, *YX_PE PG, *YX_PG PT, *YX_PT K, *YX_K MB, *YX_MB CL, *YX_CL ET, *YX_ET TF, *YX_TF SW, *YX_SW SR, *YX_SPRUE HS, *YX_HS SP, *YX_SP AG, *YX_AG LP, *YX_LP XW, *YX_XW EGP, *YX_EGP GE, *YX_GE ES, *YX_ES SW2, *YX_SW2 SBM, *YX_SBMD, *YX_D DE, *YX_DE DX, *YX_DX DW, *YX_DW DA, *YX_DA DDR, *YX_DDR DD, *YX_DD DV, *YX_DV DC, *YX_DC DB, *YX_DB Q, *YX_Q AQ, *YX_AQ UY, *YX_UY UYF, *YX_UYF SH, *YX_SH N, *YX_N DF, *YX_DF CCD, *YX_CCD DS, *YX_DS DH, *YX_DH DAQ, *YX_DAQDDW, *YX_DDW DDA, *YX_DDA DR, *YX_DR QD, *YX_QD AD, *YX_AD EED, *YX_EED DTH, *YX_DTH UYU, *YX_UYU UYQ, *YX_UYQ DUP, *YX_DUP DAUP, *YX_DAUP DTZ, *YX_DTZ DSC, *YX_DSC DTC, *YX_DTC DCC, *YX_DCC DEC, *YX_DEC DG, *YX_DG DTK, *YX_DTK DFZ, *YX_DFZ DAF, *YX_DAF DAZ, *YX_DAZDGL, *YX_DGL SDTA, *YX_SDTA CUY, *YX_CUY CDA, *YX_CDA CDD, *YX_CDD CDT, *YX_CDT CDE, *YX_CDE CDS, *YX_CDS DTY, *YX_DTY DN, *YX_DN DM, *YX_DM DS1, *YX_DS1 DS2, *YX_DS2 D1, *YX_D1D2, *YX_D2D3, *YX_D3D4, *YX_D4D5, *YX_D5D6, *YX_D6D7, *YX_D7D8, *YX_D8AT1, *YX_AT1 AT2, *YX_AT2 AT3, *YX_AT3 DA1, *YX_DA1 DA2, *YX_DA2 DA3, *YX_DA3 DA4, *YX_DA4 DA5, *YX_DA5 DA6, *YX_DA6 DA7, *YX_DA7 DA8, *YX_DA8 F, *YX_F FT, *YX_FT F01, *YX_F01 F02, *YX_F02 F03, *YX_F03 F05, *YX_F05 F1, *YX_F1 F2, *YX_F2 F3, *YX_F3 F4, *YX_F4F6, *YX_F6 F7, *YX_F7 F8, *YX_F8 F9, *YX_F9 F10, *YX_F10 F20, *YX_F20 F30, *YX_F30 F50, *YX_F50 G, *YX_G GT, *YX_GT G01, *YX_G01 G02, *YX_G02 G03, *YX_G03 G05, *YX_G05 G1, *YX_G1 G2, *YX_G2 G3, *YX_G3 G4, *YX_G4 G5, *YX_G5 G6, *YX_G6 G7, *YX_G7G9, *YX_G9 G10, *YX_G10 G12, *YX_G12 G20, *YX_G20 G30, *YX_G30 G50, *YX_G50 Y, *YX_YY01, *YX_Y01 Y02, *YX_Y02 Y03, *YX_Y03 Y05, *YX_Y05 Y1, *YX_Y1 Y2, *YX_Y2 Y3, *YX_Y3 Y4, *YX_Y4 Y5, *YX_Y5 Y6, *YX_Y6 Y7, *YX_Y7 Y8, *YX_Y8 Y9, *YX_Y9 Y10, *YX_Y10Y20, *YX_Y20 Y30, *YX_Y30 Y50, *YX_Y50 OO, *YX_OO O01, *YX_O01 O02, *YX_O02 O03, *YX_O03 O05, *YX_O05 O1, *YX_O1 O2, *YX_O2 O3, *YX_O3 O4, *YX_O4 O5, *YX_O5 O6, *YX_O6 O7, *YX_O7 O8, *YX_O8 O9, *YX_O9 O10, *YX_O10 O12, *YX_O12 O20, *YX_O20 O30, *YX_O30O50, *YX_O50希望以上资料对你有所帮助，附励志名言3条：1、宁可辛苦一阵子，不要苦一辈子。