ODS Form作业指导书 样表(一种是传统格式,一种是可视化格式)

Approval:QUALITY 质量部批准人

Approval: MANUFACTURING 制造部批准人

VISUAL OPERATION DESCRIPTION SHEET

可视化作业指导书

工艺室

DESCRIPTION:描述

Issued by 编制:T.BRIDLE

Issue Date:编制日期1999-10-27Models:Visual Aid No: VA001可视化指导书文件编号： VA001Reviewed by 审核:Revision Date:神恶化日期1999-10-27BE91

BE91 SAB FIT SAB MODULE TO FSB FRAME

Revision Level:版本1Operation Number 操作号

325,000

MOD

*

5S

HEALTH & SAFETY 安全及健康

TPM 全员生产维修

ENGINEERING

DEPARTMENT JOB ROTATION 工作轮换

ROTATE EVERY 2 HOURS

2H 轮换1次

Customer:用户

FORD 福特B E 91 S A B

1-Fit Frame to jig and press 2 green start buttons together this will lock the frame in the machine

1.将产品放到夹具上，双手同时按绿色启动按钮，固定产品到夹具上

2-Take SAB Module and fit Liner to module

2 取出SAB 模块，安装内衬到模块上

3-Fit SAB module to outboard side of FSB 3.安装SAB 模块到FSB 的外侧

4-Fit and Torque 2 M6 nuts to 5.4 +/-.9Nm

4.参数设定：调整M6螺母的紧固扭矩为

5.4 +/-.9Nm

5-Fit cable clip onto FSB frame, printer will Automatically print a copy Barcode label 5.安装线缆夹到FSB 框架上，打印机自动打印副本条形码标签

6-Take Barcode label from printer and place on side Airbag cable near to plug place completed FSB frame in correct buffer 5.撕下条形码并粘帖到靠近插头位置的气囊线缆附近，并将FSB 放在正确的托架上

1-'SEAT LOCK' Green light will come on if OK Green light will flash if operation is NOT OK

3-'Module and Liner located'

and 'Module Scanned' Green light will come on if OK

Green light will flash if operation is NOT OK 无异常时，图中指示两灯保持绿色常亮，如闪烁时，则存在异常

4-'Nut(s) Torqued' Green light will come on if OK

Green light will flash if operation is NOT OK 无异常时，图中指示”扭矩“保持绿色常亮，如闪烁时，则存在异常

5-'Cable Routed'

and 'Label Printed' Green light will come on if OK

Green light will flash if operation is NOT OK

SAFETY GLASSES MUST BE WORN ON THIS STATION SAFETY BOOTS MUST BE WORN

KEEP AREA CLEAN AND TIDY THROUGHOUT THE DAY 保持区域内的清洁和整齐

此工位必须佩戴安全护目镜和穿安全鞋

如图示，无异常时，“SEAT LOCK"绿色指示灯保持常亮，如闪

无异常时，图中所示”电缆位置“和”标签打印“指示灯保持绿色常亮，如闪烁时，则存在异常