linux错误号对应信息
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
以下错误信息是从linux内核中提取,并使用baidu翻译得出中文含义,在后半部分英文部分,是内核标记错误的原文。
新内核中未能提取到,不过差异不会很大。
linux错误号及对应的意义
error.00是:成功
error.01是:不允许操作
error.02是:没有这样的文件或目录
error.03是:没有这样的过程
error.04:中断的系统调用
error.05是:输入/输出错误
error.06是:没有这样的设备或地址
error.07是:列表太长
error.08是:执行格式错误
error.09:坏的文件描述符
error.10是:没有子进程
error.11是:资源暂时不可用
error.12是:无法分配内存
error.13是:拒绝许可
error.14是:错误的地址
error.15是块设备请求
error.16是:设备或资源忙
error.17是:文件存在
error.18是无效的交叉链接
error.19是:没有这样的设备
error.20是:不是一个目录
error.21:是一个目录
error.22是无效的参数
error.23是:打开太多的文件系统
error.24是:打开的文件太多error.25是:不适当的ioctl error.26:文本文件忙
error.27是:文件太大
error.28是:在设备上没有空间error.29是:非法谋取
error.30是只读文件系统error.31是:太多的链接error.32是:断管
error.33:数值参数的域名error.34:数值结果超出范围error.35是:资源死锁避免error.36是:文件名太长error.37是:没有可用锁error.38是:功能没有实现error.39:目录不空
error.40:符号链接层次太多error.41是:未知错误41 error.42是:没有期望类型的消息error.43:标识符删除
error.44:频道数目超出范围error.45是:2级不同步
error.46是:3级中断
error.47是:3级复位
error.48:链接数超出范围error.49:协议驱动程序没有连接error.50是:没有可用之结构error.51是:2级中断
error.52是无效的交换
error.53是:请求描述符无效error.54是:交换全
error.55是:没有阳极
error.56是无效的请求的代码error.57是无效的槽
error.58是:未知错误58 error.59是:错误的字体文件格式error.60是:设备不流
error.61是:无可用数据
error.62:计时器过期
error.63是:出流资源
error.64是:机上的不是网error.65是:没有安装软件包error.66是:对象是远程的error.67是:联系被切断
error.68是:广告的错误
error.69是:srmount误差error.70是:发送时的通讯错误error.71:协议错误
error.72企图是:跳
error.73:范畴专题具体的错误error.74是坏消息
error.75:值太大,定义数据类型error.76是:名不是唯一的网络error.77是:文件描述符在坏状态error.78:远程地址改变了
error.79是:无法访问必要的共享库
error.80是:访问损坏的共享库
error.81:库段. out损坏。
error.82是:试图链接太多的共享库error.83是:不能直接执行一个共享库error.84是无效的或不完整的多字节或宽字符error.85是:应该重新启动中断的系统调用error.86:流管误差
error.87是:用户太多
error.88套接字操作是:非套接字上error.89是:需要目标地址
error.90是:消息太长
error.91:协议类型错误的插座
error.92:协议不可用
error.93是:不支持的协议
error.94:套接字类型不受支持
error.95是:不支持的操作
error.96是:不支持的协议族
error.97:协议不支持的地址
error.98:地址已在使用
error.99是:无法分配请求的地址
error.100是:网络瘫痪
error.101是:网络不可达
error.102是:网络连接丢失
error.103是:软件导致连接中断
error.104是:连接被重置
error.105是:没有可用的缓冲空间
error.106是:传输端点已经连接
error.107是:运输终点没有连接
error.108是:无法发送后运输终点关机error.109是:太多的参考文献:不能接error.110是:连接超时
error.111是:拒绝连接
error.112是:主机已关闭
error.113是:没有主机的路由
error.114:进程已运行
error.115是:正在进行操作
error.116:陈旧的文件句柄
error.117是:结构需要清洗
error.118是:不是一个开发者指定类型的文件error.119是:开发者提供无信号
error.120:是一个命名的文件类型
error.121:远程输入/输出错误
error.122是:超出磁盘配额
error.123是:没有中发现
error.124是:错误的媒体类型
error.125是:取消操作
error.126是:所需的关键不可用
error.127:关键已过期
error.128:关键是被撤销
error.129:关键是拒绝服务
error.130是:人死了
error.131是:国家赔偿
error.132是:未知错误132
132-255全是未知错误
英文对照
error.00 is: Success
error.01 is: Operation not permitted
error.02 is: No such file or directory
error.03 is: No such process
error.04 is: Interrupted system call
error.05 is: Input/output error
error.06 is: No such device or address
error.07 is: Argum ent list too long
error.08 is: Exec form at error
error.09 is: Bad file descriptor
error.10 is: No child processes
error.11 is: Resource tem porarily unavailable error.12 is: Cannot allocate m emory
error.13 is: Permission denied
error.14 is: Bad address
error.15 is: Block device required
error.16 is: Device or resource busy
error.17 is: File exists
error.18 is: Invalid cross-device link
error.19 is: No such device
error.20 is: Not a directory
error.21 is: Is a directory
error.22 is: Invalid argument
error.23 is: Too m any open files in system error.24 is: Too m any open files
error.25 is: Inappropriate ioctl for device error.26 is: Text file busy
error.27 is: File too large
error.28 is: No space left on device
error.29 is: Illegal seek
error.30 is: Read-only file system
error.31 is: Too m any links
error.32 is: Broken pipe
error.33 is: Numerical argument out of dom ain error.34 is: Numerical result out of range error.35 is: Resource deadlock avoided error.36 is: File name too long
error.37 is: No locks available
error.38 is: Function not im plemented
error.39 is: Directory not em pty
error.40 is: Too m any levels of sym bolic links
error.41 is: Unknown error 41
error.42 is: No message of desired type
error.43 is: Identifier removed
error.44 is: Channel number out of range
error.45 is: Level 2 not synchronized
error.46 is: Level 3 halted
error.47 is: Level 3 reset
error.48 is: Link number out of range
error.49 is: Protocol driver not attached
error.50 is: No CSI structure available
error.51 is: Level 2 halted
error.52 is: Invalid exchange
error.53 is: Invalid request descriptor
error.54 is: Exchange full
error.55 is: No anode
error.56 is: Invalid request code
error.57 is: Invalid slot
error.58 is: Unknown error 58
error.59 is: Bad font file format
error.60 is: Device not a stream
error.61 is: No data available
error.62 is: Timer expired
error.63 is: Out of stream s resources
error.64 is: Machine is not on the network
error.65 is: Package not installed
error.66 is: Object is rem ote
error.67 is: Link has been severed
error.68 is: Advertise error
error.69 is: Srmount error
error.70 is: Communication error on send
error.71 is: Protocol error
error.72 is: Multihop attempted
error.73 is: RFS specific error
error.74 is: Bad message
error.75 is: Value too large for defined data type
error.76 is: Name not unique on network
error.77 is: File descriptor in bad state
error.78 is: Remote address changed
error.79 is: Can not access a needed shared library
error.80 is: Accessing a corrupted shared library
error.81 is: .lib section in a.out corrupted
error.82 is: Attem pting to link in too m any shared libraries error.83 is: Cannot exec a shared library directly
error.84 is: Invalid or incom plete m ultibyte or wide character
error.85 is: Interrupted system call should be restarted error.86 is: Streams pipe error
error.87 is: Too m any users
error.88 is: Socket operation on non-socket
error.89 is: Destination address required
error.90 is: Message too long
error.91 is: Protocol wrong type for socket
error.92 is: Protocol not available
error.93 is: Protocol not supported
error.94 is: Socket type not supported
error.95 is: Operation not supported
error.96 is: Protocol family not supported
error.97 is: Address family not supported by protocol error.98 is: Address already in use
error.99 is: Cannot assign requested address
error.100 is: Network is down
error.101 is: Network is unreachable
error.102 is: Network dropped connection on reset
error.103 is: Software caused connection abort
error.104 is: Connection reset by peer
error.105 is: No buffer space available
error.106 is: Transport endpoint is already connected error.107 is: Transport endpoint is not connected
error.108 is: Cannot send after transport endpoint shutdown error.109 is: Too m any references: cannot splice
error.110 is: Connection tim ed out
error.111 is: Connection refused
error.112 is: Host is down
error.113 is: No route to host
error.114 is: Operation already in progress
error.115 is: Operation now in progress
error.116 is: Stale NFS file handle
error.117 is: Structure needs cleaning
error.118 is: Not a XENIX named type file
error.119 is: No XENIX sem aphores available
error.120 is: Is a named type file
error.121 is: Remote I/O error
error.122 is: Disk quota exceeded
error.123 is: No m edium found
error.124 is: Wrong medium type
error.125 is: Operation canceled
error.126 is: Required key not available
error.127 is: Key has expired
error.128 is: Key has been revoked
error.129 is: Key was rejected by service error.130 is: Owner died
error.131 is: State not recoverable error.132 is: Unknown error 132
132-255全是Unknown error。