产品尺寸测量报告Dimension measurement report
质量管理常用缩写
【A】ABC Activity-Based Costing 作业制成本制度AR Account Receivable 应收款AP Account Payable 应支AVL Approval Vendor List 合格厂商ACC accept 允收APP Approve 核准,认可,承认ASSY Assembly 装配,组装A.S.A.P As Soon As Possible 尽可能快的AOD Accept On Deviation 特采（n,背离）AQL Acceptable Quality Level 运作类允收品质水准ANOVA Analysis of Variance 变异数分析/方差分析APQP Advanced Production Quality Plan 产品质量先期计划ADM Absolute Dimension Measurement 全尺寸测量AR Average Range 全距平均值AOQL Average Output Quality Level 平均出货品质水平【B】BOM Bill Of Material 物料清单BTF Build To Forecast 计划生产BTO Build To Order 订单生产BSC Balanced Scoreboard 平衡计分卡【C】CAR Corrective Action Request 改进对策要求CAR Correction Action Report 改善报告CPM Complaint per Million 每一百万个使用者会有几次抱怨CPM Critical Path Method 要径法CRM Customer Relationship Management 客户关系管理CRP Capacity Requirements Planning 产能需求规划CS Customer Satisfaction 顾客满意度CS Customer Service 顾客服务CTO Configuration To Order 客制化生产CTQ Critical to quality 质量关键COGS Cost Of Goods Sold 销售成本CQA Customer Quality Assurance 客户品质保证CSA Customer Simulate Analysis 客户模拟分析CIP Continual Improvement Plan 持续改善计划CRA corrective action report 改正行动报告(改善报告) CON Concession / Waive 特采CAT Carriage Alignment Tool 载器调整具CR Critical 极严重的CP capability index 能力指数/准确度C=0 Critical=0 极严重不允许CHK Check 确认CPU Central Processing Unit 中央处理器CTN Carton 卡通箱CPK capability process index 过程能力参数Conformity 合格（符合）Characteristic 特性continual improvement 持续改进Correction 纠正Cost down 降低成本Confidence interval 信赖区间Control chart 管制图Cause and Effect matrix 因果图.鱼骨图Center line 中心线check 检查Check Sheet 查检表Characteristic Diagram 特性要因图Complaint 投诉CPI: continuous Process Improvement 连续工序改善【D】DIM Dimension 尺寸DIA Diameter 直径DWG Drawing 图面DC Document Center 资料中心D/C Date Code 生产日期码DQA Design Quality Assurance 设计品质保证DOE Design of Experiments 实验设计DCC Document Control Center 数据控制中心DPPM Defective Pieces Per Million units 百万件中有损件数DPMO Defects per million opportunities 每百万个机会的缺点数DPU Defects per unit 单位缺点数DFSS Design for six sigma 六个希格玛设计DOE Design of experiment 实验设计DVT Design Verification Testing 设计验证DSS Decision Support System 决策支持系统DCN Design Change Notice 设计变更通知DMR Defective Material Report 材料缺陷报告DWG Drawing 图面系统文件类DOE Design of Experiments 实验设计DSA Defects Analysis System 缺陷分析系统Data Collection 数据收集Description 描述Device 装置Digital 数字Do 执行Design of manufacturing 制造设计deviation permit 偏离许可degrade 降级design and development 设计和开发dependability 可信性Defect 缺陷Decision 决心Data 数据Data Collection 数据收集Data concentrator 资料集中缓存器Decision 决策.判定Defects per unit 单位缺点数Description 描述Detection 难检度Device 装置Digital 数字Do 执行【E】EC Engineer Change 设计变更／工程变更EC Electronic Commerce 电子商务EMC Electric Magnetic Capability 电磁相容EOQ Economic Order Quantity 基本经济订购量ERP Enterprise Resource Planning 企业资源规划ECN Engineering Change Notice 工程变更通知(供货商) ECO Engineering Change Order 工程改动要求(客户)ERS External Reference Spec 外部规格ERP Enterprise Resource Programming 企业资源项目ES Engineering Standard 工程标准E-MAIL Electrical-Mail 电子邮件EAR Engineering Analysis Request 工程分析要求EV Equipment Variation 设备变异ES Engineering Standardization 工程标准Environmental 环境Equipment 设备Effectiveness 有效性Efficiency 效率Element 元素Else 否则Engineering technology 工程技术Entropy 函数Estimated accumulative frequency 计算估计累计数External Failure 外部失效,外部缺陷Event 事件【F】FMEA Failure Mode and Effect analysis 失效模式与效果分析FA Failure Analysis 不良分析FQA Final Quality Assurance 最终品质保证FQC Final Quality control 最终品质控制FAI first article inspection 首件检查FAA first article assurance 首件确认FPIR First Piece Inspection Report 首件检查报告F/T Function Test 功能测试FMS Flexible Manufacture System 弹性制造系统FQC Finish or Final Quality Control 成品质量管理FGI Finished goods Inventory 成品存货FTA Fault Tree Analysis 故障树分析FREQ Frequency 频率FIN Finance 财务Fix OH Fix Overhead 固定管理费用Finance Accounting 财务账目Failure rate 故障率Fact control 事实管理FPY 合格率Full-steer 完全转向function 职能【G】GS General Specification 一般规格GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量测可靠与否Gauge system 量测系统Grade 等级General Affair 总务【H】H/W hardware 硬件H/T High Temperature Test 高温测试HQ Headquarter 总公司HR Human Resource 人力资源部Histogram 直方图Hypothesis testing 假设检定Health meter 体重计Heat press 冲压粘着Hi-tech 高科技【I】IMD Image Management Division 影像管理事业部ITS Information Technology System 计算机部IPQC In Process Quality Control 制程品质控制IQC Incoming Quality Control 来料品质控制IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织IS Inspection Specification 成品检验规范IE Industrial Engineering 工业工程ID/C Identification Code (供货商)识别码ID Industrial Design 工业设计(外观设计)IS Information System 资讯系统IT Information Technology 系统技术ISAR Initial Sample Approval Request 首批样品认可I/O input/output 输入/输出Improvement 改善Inductance 电感Information 信息Initial review 先期审查Inspection 检验Internal Failure 内部失效,内部缺陷Interested party 相关方Infrastructure 基础设施Inspection 检验【J】JIT Just In Time 实时管理JQE Joint Quality Engineer 客服工程师【L】LCL Lower Control limit 管制下限LQC Line Quality Control 生产线品质控制LQL Limiting Quality Level 最低品质水准L/T Lead Time 前置时间(生产前准备时间)LRR Lot Reject Rate 批退率LSL Lower Size Limit 规格下限L/T Low Temperature Test 低温测试L/N Lot Number 批号LAB Laboratory 实验室LPCL Lower Per-control Limit 前置管制下限Love 爱心Link 连接Life Test 寿命测试Law of large number 大数法则【M】MSA Measurement System Analysis 量测系统分析MPS Mass Production Schedule 量产计划MTF Modulation Transfer Function 调整转换功能MC Material Control 物料控制MVT Mass Verification Test 多项验证测试MIL-STD Military Standard 军用标准MIS Management Information System 管理资讯系统MTBF Mean Time Between Failure 平均故障间隔MAJ Major 主要的MIN Minor 轻微的MIN Minimum 最小值MAX Maximum 最大值MQA Manufacture Quality Assurance 制造品质保证MRP Material Requirement Planning 物料需求计划MRB Material Review Board 物料评审委员会MRB Material Reject Bill 退货单MO Manufacture Order 生产单MFG Manufacturing 制造部MES Manufacturing Execution System 制造执行系统management system 管理体系Materials 物料Measurement 量测management 管理Machine 机械Materials 物料Median 中位数Miss feed 漏送Momentum 原动力Multiplication rule 乘法运算规则【N】N/A Not Applicable 不适用NG Not Good 不行,不合格N Number 样品数NFCF Notice for Changing Forecast 更改预估量的通知Nonconformity 不合格（不符合）Normal distribution 常态分配【O】OQA output quality assurance 出货质量保证OQC Out going Quality Control 出货质量控制OPT Optimized Production Technology 最佳生产技术ORT On Going Reliability Test 出货可靠性测试OBA Open Box Audit 成品检验OEM Original Equipment Manufacture 原设备制造OBA out of box audit 开箱检查Occurrence 发生率Organization 组织organizational structure 组织结构Operation Instruction 作业指导书【P】PR Public relation 公共关系PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划PMC Production & Material Control 生产和物料控制PCC Product control center 生产管制中心PPC Production Plan Control 生产计划控制P&L Profit & Lose 利润与损失PV Performance Variance 性能差异PRS Pairs 双(对等)PO Purchasing Order 采购订单PD Product Department 生产部POC passage quality control 检人员P/N Part Number 番号PPM Percent Per Million 百万分之一PS Package Specification 包装规范PD Product Department 生产部PCBA Printed Circuit Board Assembly 电路板组装PVT Production Verification Test 生产验证测试PDCA Plan-Do-Check-Action 管理循环PQC process quality control 制程检查管制PQA Process Quality Assurance 制程品质保证PPAP Production Parts Approval Procedure 生产件批准程序PCL Per-control Central Limit 前置管制中心限PO Purchase Order 订单PUR Purchasing 采购President 总裁preventive action 预防措施Plato Diagram 柏拉图Parameter 参数Part 零件Pulse 脉冲Policy 方针Procedure 流程Process 过程Product 产品Production 生产Program 方案Projects 项目Progress 进步Passive 消极的,被动的Population 群体Power 力量,能源Practice 实务Precision 精密度preemptive 先占式多任务Pressure 压缩Prevention 预防Probability 机率Probability density function 机率密度函数Process capability analysis 制程能力分析图Process control and process capability 制程管制与制程能力Producer’s risk 生产者之风险【Q】QA Quality Assurance 品质保证QC Quality Control 品质控制QE Quality Engineering 品质工程QFD Quality Function Design 品质架构设计OQA output quality assurance 出货质量保证人员QRA Quality & Reliability Assurance 质量与可靠性保证QE Quality Engineer 质量工程师QRA Quality Reliability Assurance 品保部QCC Quality Control Circle 品管圈QP Quality Policy 目标方针QIT Quality Improvement Team 品质改善小组QI Quality Improvement 品质改善Q/R/S Quality/Reliability/Service 品质/可靠度/服务QTY Quantity 数量QVL Qualified Vendor List 合格厂商QFD quality function deployment 质量机能展开QS Quality System 品质系统QRA Quality Reliability Assurance 品质保证(处)QSA Quality System Audit 品质系统审核QT Quality Target 品质目标QCP Quality Control Procedures 品管程序quality objective 质量目标quality plan 质量计划qualification process 鉴定过程Quality manual 品质手册【R】RMA Return Material Audit 退料认可R&D Research & Design 设计开发部RMA Return Material Administration 材料回收管理RMA Returned Material Approval 退货验收ROP Re-Order Point 再订购点REE Reject 拒收RMA Return Material Authorization/Authority 退料认可RPN Risk Priority Number 风险系数Record 记录Reflow 回流Repair 返修Repeatability 可重复性Reproducibility 再现性Requirement 要求Residual 剩余的，残留的Response 响应Responsibilities 职责Review 评审Rework 返工Rolled yield 直通率Release 放行Range 全距Random experiment 随机试验Random numbers 随机数Range 全距Reject 拒收Response 响应Responsibility 职责Robustness 稳健性Rolled yield 直通率【S】SOP Standard Operation Procedure 标准作业书SPC Statistical Process Control 统计制程管制SQA Source(Supplier) Quality Assurance 供应商品质保证SIP Standard Inspection Procedure 制程检验标准程序SOP Standard Operation Procedure 制造作业规范SPC Statistical Process Control 统计过程管制SQC Statistical Quality Control 统计质量管理SSQA standardized supplier quality audit 合格供货商品质评估S/S Sample size 抽样检验样本大小SQA Strategy Quality Assurance 策略品质保证SSQA Sales and service Quality Assurance 销售及服务品质保证SPEC Specification 规格SWR Special Work Request 特殊工作需求SAP System Application Programming 体系运行计划S/W software 软件SFC Shop Floor Control 现场控制SO Sales Order 订单SIP Specification Inspection Process 制程检验规格SQM Supplier Quality Management 供应商品质管理SL Size Line 规格中心线Stratification 层别法System 体系(系统)Sales 销售Supplier 供方sample 抽样,样本Scrap 报废sample 抽样,样本Scatter diagram 散布图分析Screw 螺旋Severity 严重度Size 规格Slip 滑动Special cause 特殊原因Specification 规范Stage sampling 分段随机抽样statistical table 统计(数值)表Sum of squares 统计表systematic sampling 系统抽样Sample space 样本空间Simple random sampling 简单随机取样Stratified random sampling 分层随机抽样Sampling with replacement 放回抽样Sampling without replacement 不放回抽样【T】TQC Total Quality Control 全面品质控制TQM Total Quality Management 全面品质管理TPM Total Production Maintenance 全面生产保养T/P True Position 真位度T/C Temperature Cycle 温度循环T/O Turn Over Rate=Monthly 周转率TOC Theory of Constraints 限制理论TVR tool verification report 模具确认报告Taguchi-method 田口方法top management 最高管理者Test 试验traceability 可追溯性Technical committees 技术委员会Test piece 测试片Theory 原理Time stamp 时间戳印Time-lag 延迟Title 标题Torque 转矩Total 求和Traceability 追溯Training 培训Trouble 困扰Transaction processing and logging 交易处理【U】UCL Upper Control Limit 管制上限USL Upper Size Limit 规格上限UTS Units To Stock 存货单元UPCL Upper Per-control Limit 前置管制上限Up and down 上和下【V】VQM endor Quality Management 厂商质量管理VMI Visual Mechanical Inspection 外观机构检验VOC voice of Customer 客户需求VOE Voice of Engineer 工程需求Vice President 副总裁Verification 验证Validation 确认Variable 计量值Version 版本Vector 向量【W】WIP Work In Process 在制品WDR Weekly Delivery Requirement 周出货要求work environment 工作环境【Z】ZD Zero Defect 零缺点。
品质术语中英文对照
品质人员名称类：QC quality control品质管理人员F QC final quality control终点质量管理人员IP QC in process quality control制程中的质量管理人员O QC output quali y control最终出货质量管理人员IQC incoming quality control进料质量管理人员TQC total quality control全面质量管理POC passage quality control段检人员QA quality assurance质量保证人员OQ A output quality assurance出货质量保证人员Q Equality engineering品质工程人员二、品质保证类：FAI first article inspection新品首件检查FAA first article assurance首件确认TVR tool verification report模具确认报告3B3B模具正式投产前确认CP cap abi ity index能力指数CPK cap abi ity index of process模具制程能力参数SSQ A standardized supplier quality合格供货商品质评估OOB A out of box audit开箱检查QFD quality function deployment品质机能展开FMEA failure model effectiveness analysis失效模式分析8 disciplines 8项回复内容FA final audit最后一次稽核CAR corrective action request改正行动要求corrective action report改正行动报告三、F QC运作类AQL Acceptable Quality Level运作类允收品质水准S/S Sample size抽样检验样本大小ACC Accept允收REE Reject拒收CR Critical极严重的MAJ Major主要的MIN Minor轻微的A OQ Average Output Quality平均出厂品质A OQL Average Output Quality Level平均出厂品质Q/R/S Quality/Reliability/Service品质/可靠度服务MIL-STD Ml itary-Standard军用标准PPM Percent Per Milon百万分之一L/N Lot Number 生产批号四、制程统计品管专类：SPC Statistical Process Control统计制程管制SQC Statistical Quality Control统计质量管理R Range全距A RAver ary Range全距平均值UCL Upper Central Limit管制上限LCL Lower Central Limit管制下限MAX Maximum最大值MIN Minimum最小值GRR Gauge Reproducibility&Repeat abilty量具之再制性及重测性判断量可靠与否DIM Dimension尺寸DIA Diameter直径FREQ Frequency频率N Number样品数五、其它品质术语类：PDCA Plan Do Check Action计划执行检查总结QI Quali y Improvement品质改善QP Quality Policy目标方针SI-SIV Special l-SpecialⅣV特殊抽样水准等级P/N Part Number料号AOD Accept On Deviation特采UAI Use As It首件检查报告PPM Percent Per Million百万分之一QCC Quality Control Circle品质圈Plan Do Check Action计划执行检查总结ZD Zero Defect零缺点TQM Total Quality Management全面品质管理MRB Material Reject Bill退货单LQ L Limiting Quality Level最低品质水准RMA Return Material Audit退料认可Q AN Quality A me lion rate Notice品质改善活动ADM Absolute Dimension Measure mat全尺寸测量QT Quality Target品质目标7QC Tools 7 Quality Controll Tools品管七大手法六、QS-9000中的术语：APQP Advanced Product Quality Planning and Control Plan，产品质量先期策划和控制计划PPAP Production Part Approval Process，生产件批准程序FMEA Potential Failure Mode and Effects Analysi，潜在失效模式及后果分析MSA Measure System Analysis，测量系统分析SPC Statistical Process Control，统计过程控制六、QS-9000中的术语：APQP Advanced Product Quality Planning and Control Plan，产品质量先期策划和控制计划PPAP Production Part Approval Process，生产件批准程序FMEA Potential Failure Mode and Effects Analysis，潜在失效模式及后果分析MSA Measure System Analysis，测量系统分析SPC Statistical Process Control，统计过程控制Audit审核Audit 能力Capability 能力Capability Indices 能力指数Control Plans 控制计划Corrective Action 纠正措施文件Documentation 文件work instruction作业指导书Nonconformity 不符合项Nonconforming products不合格品Unqualified 不合格Defective Parts Per Milon，DPPM 每百万零件不合格数Preventive Action预防措施Procedures程序Process Flow Diagram过程流程图，Quality Manual质量手册Quality Plan质量计划Quality Planning质量策划Quality Records 质量记录Reaction Plan反应计划Repair返修返工Rework现场Site分承包方Subcontractors产品product质量quality质量要求quality requirement顾客满意customer satisfaction质量管理体系quality management system 质量方针quality policy质量目标qua ity objective质量管理quality management质量控制quality control质量保证quality assurance组织organization顾客customer供方supplier过程process服务service设计与开发design and development特性characteristic可追溯性traceability合格conformity缺陷defect纠正correction让步concession放行release报废scrap规范specification评审review测量measurement计数型数据Attributes Data普通原因CommonCause单值Individual均值Mean随机抽样Random Sampling 极差Range特殊原因Special Cause稳定性Stabi ity子组Subgroup计量型数据Variables Data 变差Variation固有变差Inherent Variation 总变差Total Variation偏倚Bias重复性Repeatability再现性Reproduc ibi ity稳定性Stability Linearity分辨率Resolution过程更改Process change过程更改Process change质量功能展开QFD过程特殊特性Special Process Characteristic产品特殊特性Special Product Characteristic外观项目Appearance Item初始过程能力Preliminary Process Capability材料清单Bill of Material设计确认Design Validation设计验证Design Verification顾客的呼声Voice of the Customer过程的呼声Voice of the Process七、常用缩略词语：ES工程规范Engineering SpecificationKCC关键控制特性(GM) Key Control CharacteristicKPC关键产品特性(GM) Key Product CharacteristicOEM整车厂Original Equipment ManufacturerSC重要(特殊) 特性Significant(Special) Characteristic ANOVA方差分析法Analysis of Variance CFT多方论证小组Cross function T eam DFMEA设计失效模式及后果分析Design Failure Mode and Effects Analysis DOE试验设计Design of Experiment DVP&R设计验证计划和报告Design verification Plan and ReportFTC试生产能力First Time CapabilityGR&R量具的重复性和再现性Gage Repeatability and ReproducibilityP FMEA过程失效模式及后果分析Process Failure Mode and Effect AnalysisSF ME A系统失效模式及后是分析System Failure Mode and Effect Analysis QSR 质量体系要求Quality System RequirementQFD质量功能展开Quality Function DeploymentTGR运行情况良好Things Gone RightTGW运行情况不良Things Gone WrongVE/VA价值工程/价值分析Value Engineering/Value AnalysisBOM物料清单Bill of MaterialCpk 稳定过程的能力指数Cap ablity for stable processLCL 下控制限Lower Control LimitUCL 上控制限Upper Control LimitLSL 工程规范下限Lower Specification LimitUS L 工程规范上限Upper Specification LimitPpk 性能指数The performance indexMRB 物料评审Material Review BoardPSW 零件提交保证书Part Submission WarrantX(-)--R图均值一极差图Average-Range ChartSR PC 供方要求产品更改Supplier Request for Product ChangeIAA临时批准授权Interim Approval AuthorizationAAR外观件批准报告Appearance Approval ReportPTR试生产(报告) Production Trial Run(Report)DCP尺寸控制计划(动态控制计划) Dimension Control Plan(Dynamic Control Plan) 防错(POKA-YOKE) Mistake ProofingECN：工程变更通知单BOM：物料清单SOP：作业指导书SIP：检验指导书AC：允收RE：拒收AQL：品质允收水准CR：致命缺陷9.MAX：严重缺陷MIN：轻微缺陷QA：品质保证IP QC：制程品质控制IQC：进料品质控制QE：品质工程F MEN：失效模式及后果分析SPC：统计过程控制CPK：工序能力指数SQC：统计品质管控QMS：质量管理体系ISO：国际标准化组织ISO 9000：质量管理体系ISO 14001：环境管理体系CAR：客户投诉不良改善报告CPAR：纠正/预防措施报告TQC：全面质量管理ROHS：电机电子产品之危害物质限用指令QCC：品管圈UCL：管制上限LCL：管制下限14.P DCA：计划、实施、检查、处置5M1E：人员、机器、物料、方法、测量、环境5W2H：何时、何地、何人、何事、为何、如何、几何(几多、多少) PCBA：印刷电路板SQM：供应商品质管理ECR：设计变更IQC：来料检验IP QC：制程检验F QC：最终检验(成品检验)O QC：出厂检验QA：品质保证QE：品质工程PQE：产品品质工程师PE：产品工程师PC：生产控制(生管)MC：物料控制ME：机械工程师FE：设备工程师SQC：统计品管TQC：全面品质管制QFD：质量机能展开we nku.con CW QC：日本模式TQC-全公司品管TQM：全面品质管理AQL：判定基准-不良率为%PPM：百万分之一不良率SOP：标准作业程序SIP：标准检验程序PDCA：戴明管理循环(Plan设计、Do制造，实施、Check检查、Action修正) BOM：物料清单ECO：工程变更指令MN：制造通知MPI：作业指导书TPI：测试指导书API：调试指导书Rev：版本WIP：在制品MAJ：主要缺点MIN：次要缺点CRI：严重缺点SAMPLE：样品。
英语大全-厂内作业
英语大全-厂内作业QT:Quality target品质目标QP:Quality policy目标方针QI:Quality improvement品质改善CRITICAL DEFECT:严重缺点（CR）MAJOR DEFECT:主要缺点（MA）MINOR DEFECT:次要缺点（MI）MAX:Maximum最大值MIN:Minimum最小值DIA iameter直径DIM imension尺寸LCL:Lower control limit管制下限UCL:Upper control limit管制上限EMI:电磁干扰ESD:静电防护EPA:静电保护区域ECN:工程变更ECO:Engineering change order工程改动要求（客户）ECR:工程变更需求单CPI:Continuous Process Improvement 连续工序改善Compatibility：兼容性Marking：标记DWG rawing图面Standardization：标准化Consensus：一致Code：代码ZD:Zero defect零缺点Tolerance：公差Subject matter：主要事项Auditor：审核员BOM:Bill of material物料清单Rework：重工ID：identification识别,鉴别,证明PILOT RUN: (试投产)FAI:首件检查FPIR：First Piece Inspection Report首件检查报告FAA:首件确认SPC：统计制程管制CP: capability index（准确度）CPK: capability index of process(制程能力)PMP:制程管理计划（生产管制计划）MPI:制程分析DAS efects Analysis System 缺陷分析系统PPB：十亿分之一Flux：助焊剂P/N:料号L/N：Lot Number批号Version：版本Quantity：数量Valid date：有效日期MIL-STD：Military-Standard军用标准ICT: In Circuit Test (线路测试)ATE：Automatic Test Equipment自动测试设备MO: Manafacture Order生产单T/U: Touch Up (锡面修补)I/N:手插件P/T:初测F/T: Function Test (功能测试-终测)AS 组立P/K:包装TQM:Total quality control全面品质管理MDA:manufacturing defect analysis制程不良分析(ICT) RUN-IN:老化实验HI-pot：高压测试FMI：Frequency Modulation Inspect高频测试DPPM: Defect Part Per Million(不良率的一种表达方式：百万分之一) 1000PPM即为0.1% Corrective Action: (CAR改善对策)ACC：允收REJ:拒收S/S：Sample size抽样检验样本大小SI-SIV：Special I-Special IV特殊抽样水平等级CON：Concession / Waive特采ISO:国际标准化组织ISA：Industry Standard Architecture工业标准体制结构OBA:开箱稽核FIFO:先进先出PDCA:管理循环Plan do check action计划，执行，检查，总结WIP:在制品（半成品）S/O: Sales Order (业务订单)P/O: Purchase Order (采购订单)P/R: Purchase Request (请购单)AQL:acceptable quality level允收品质水准LQL;Limiting quality level最低品质水准QVL:qualified vendor list合格供应商名册AVL ：认可的供货商清单(Approved Vendor List) QCD: Quality cost delivery（品质，交期，成本）MPM:Manufacturing project management制造专案管理KPI:Key performance indicate重要绩效指标MVT:Manufacturing Verification Test制造验证试产Q/R/S：Quality/Reliability/Service质量/可靠度/服务STL:ship to line（料到上线）NTF:No trouble found误判CIP:capacity improvement plan（产能改善计划）MRB:material review board（物料审核小组）MRB:Material reject bill退货单JIT:just in time（即时管理）5S:seiri seiton seiso seiketsu shitsuke（整理，整顿，清扫，清洁，修养）SOP:standard operation process（标准作业程序）SIP:Specification inspection process制程检验规格TOP: Test Operation Process (测试作业流程)WI: working instruction（作业指导书）SMD:surface mounting device（表面粘着原件）FAR:failure aualysis report故障分析报告CAR:Corrective action report改善报告BPR：企业流程再造 (Business Process Reengineering) ISAR ：首批样品认可(Initial Sample Approval Request)-JIT：实时管理 (Just In Time)QCC ：品管圈 (Quality Control Circle)Engineering Department (工程部)TQEM: Total Quality Environment Management(全面品质环境管理)PD: Production Department (制造)LOG: Logistics (后勤支持)Shipping: (进出口)AOQ：Average Output Quality平均出货质量AOQL：Average Output Quality Level平均出货质量水平FMEA：failure model effectiveness analysis失效模式分析CRB: Change Review Board (工程变更会议)CSA：Customer Simulate Analysis客户模拟分析SQMS：Supplier Quality Management System供应商品质管理系统QIT: Quality Improvement Team 品质改善小组QIP：Quality Improvement Plan品质改善计划CIP：Continual Improvement Plan持续改善计划M.Q.F.S: Material Quality Feedback Sheet (来料品质回馈单) SCAR: Supplier Corrective Action Report (供货商改善对策报告)8D Sheet: 8 Disciplines sheet ( 8D单)PDCA：PDCA (Plan-Do-Check-Action) (管理循环)MPQ: Material Packing Quantity (物料最小包装量)DSCN: Delivery Schedule Change Notice (交期变更通知) QAPS: Quality Assurance Process Sheet (品质工程表)DRP ：运销资源计划 (Distribution Resource Planning)DSS：决策支持系统 (Decision Support System)EC ：电子商务 (Electronic Commerce)EDI ：电子资料交换 (Electronic Data Interchange)EIS ：主管决策系统 (Excutive Information System)ＥＲＰ：企业资源规划 (Enterprise Resource Planning)FMS ：弹性制造系统 (Flexible Manufacture System)KM ：知识管理 (Knowledge Management)4L ：逐批订购法 (Lot-for-Lot)LTC ：最小总成本法 (Least Total Cost)LUC ：最小单位成本 (Least Unit Cost)MES ：制造执行系统 (Manufacturing Execution System)MPS ：主生产排程 (Master Production Schedule)MRP ：物料需求规划 (Material Requirement Planning)MRPⅡ：制造资源计划 (Manufacturing Resource Planning) OEM ：委托代工 (Original Equipment Manufacture)ODM ：委托设计与制造 (Original Design & Manufacture) OLAP：线上分析处理 (On-Line Analytical Processing) OLTP：线上交易处理 (On-Line Transaction Processing) OPT ：最佳生产技术 (Optimized Production Technology) PDCA：PDCA管理循环 (Plan-Do-Check-Action)PDM：产品数据管理系统 (Product Data Management)) RCCP：粗略产能规划 (Rough Cut Capacity Planning) SCM ：供应链管理 (Supply Chain Management)SFC ：现场控制 (Shop Floor Control)TOC：限制理论 (Theory of Constraints)TQC ：全面品质管制 (Total Quality Control)FYI/R:for your information/reference仅供参考ASAP:尽快S/T:Standard time标准时间TPM:total production maintenance：全面生产保养ESD Wrist strap：静电环IT:information technology信息技术，资讯科学CEO：Chief Executive Officer执行总裁COO：Chief Operaring Officer首席业务总裁SWOT：Strength,Weakness,Opportunity,Threat优势﹐弱点﹐机会﹐威胁Competence：专业能力Communication：有效沟通Cooperation：统御融合Vibration Testing：振动测试IDP：Individual Development Plan个人发展计划MRP：Material Requirement Planning物料需求计划MAT'S：Material材料LRR：Lot Rejeet Rate批退率ATIN：Attention知会3C：Computer ,Communication , Consumer electronic消费性电子5W1H：When , Where , Who , What , Why , Ho5M: Man , Machine , Material , Method , Measurement人,机器,材料,方法,测量4MIE: Man,Material,Machine,Method,Environment人力,物力,财务,技术,时间(资源)7M1I: Manpower , Machine , Material , Method, Market , Management , Money , Information人力，机器，材料，方法, 市场，管理，资金，资讯质量人员名称类QC quality control 品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认CP capability index 能力指数CPK capability process index 模具制程能力参数SSQA standardized supplier quality audit 合格供货商质量评估FMEA failure model effectiveness analysis 失效模式分析FQC运作类AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的Q/R/S Quality/Reliability/Service 质量/可靠度/服务P/N Part Number 料号L/N Lot Number 批号AOD Accept On Deviation 特采UAI Use As It 特采FPIR First Piece Inspection Report 首件检查报告PPM Percent Per Million 百万分之一制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理GRR Gauge Reproductiveness & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径N Number 样品数其它质量术语类QIT Quality Improvement Team 质量改善小组ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM Total Quality Management 全面质量管理RMA Return Material Audit 退料认可7QCTools 7 Quality Control Tools 品管七大手法通用之件类ECN Engineering Change Notice 工程变更通知(供货商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Standard Inspection Procedure 制程检验标准程序SOP Standard Operation Procedure 制造作业规范POP packing operation procedure 包装操作指导书PS Package Specification 包装规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单SPEC Specification 规格DWG Drawing 图面系统文件类ES Engineering Standard 工程标准IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 一般规格部门类PMC Production & Material Control 生产和物料控制PCC Product control center 生产管制中心PPC Production Plan Control 生产计划控制MC Material Control 物料控制DC Document Center 资料中心QE Quality Engineering 质量工程(部)QA Quality Assurance 质量保证(处)QC Quality Control 质量管理(课)PD Product Department 生产部LAB Laboratory 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部品质类qualified products, up-to-grade products良品defective products, not up-to-grade products不良品defective product box不良品箱poor processing 制程不良poor incoming part来件不良exposed metal/bare metal金属裸露excessive defect过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格cosmetic defect外观不良lack of painting烤漆不到位slipped screw head/slippery slipped thread滑丝missing part漏件wrong part错件oxidation氧化defective threading抽芽不良poor staking铆合不良deficient purchase来料不良deficient manufacturing procedure制程不良cosmetic inspection外观检查inner parts inspection内部检查blister 气泡angular offset 角度偏差dent 压痕scratch 刮伤deformation 变形filings 铁削defective label 不良标签abrasion 磨损Breaking. (be)broken,(be)cracked 断裂short射料不足nick缺口speck瑕疪shine亮班splay 银纹gas mark焦痕delaminating起鳞speckle斑点mildewed =moldy = mouldy发霉deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excessive gap间隙过大grease/oil stains油污inclusion杂质shrinking/shrinkage缩水mixed color杂色fold of packaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍impurity 杂质Mismatch 错位failure, trouble 故障deformation 变形rust 生锈peel 脱漆Shrink 缩水Contamination 脏污water spots 水渍Gap 间隙label error 标签错误Missing label 漏贴rejection criteria 拒收标准Suspected rejects 可疑庇abrasion 损伤、磨损Texture surface 印花纹表面Streak 条纹stains 污点Blotch 斑点discoloration 脱色Inclusion 杂质slug mark 压痕dirt grime 灰尘blush 毛边薄膜sink 下凹Hickey 漏漆labels and logos 贴纸与商标Configuration labels 组合贴纸corrugated container 瓦摆纸箱Delaminating 脱层splattering 散点Gouge 锉孔puckering 折痕品管七大手法层别法：stratification直方图：histogram柏拉图：plato diagram查检表：check sheet特性要因图：charateristic diagram散布图：scatter diagram管制图：control diagramOTHERS（其它）1 Accuracy 准确度2 Action 行动3 Activity 活动4 Analysis Covariance 协方差分析5 Analysis of Variance 方差分析6 Approved 承认7 Attribute 计数值8 Average 平均数9 Balance sheet 资产负债对照表10 Binomial 二项分配11 Brainstorming Techniques 脑力风暴法12 Cause and Effect Matrix 因果图(鱼骨图)13 CL:Center Line 中心线14 Check Sheets 检查表15 Complaint 投诉16 Conformity 合格（符合）17 Control 控制18 Control chart 控制(管制)图19 Correction 纠正20 Correlation Methods 相关分析法21 CPI: continuouse Process Improvement 连续工序改善22 Cross Tabulation Tables 交叉表23 CS: Customer Sevice 客（户）服（务）中心24 DSA: Defects Analysis System 缺陷分析系统25 Data 数据 Description:品名26 DCC: Document Control Center 文控中心27 Decision 决策、判定28 Defects per unit 单位缺点数29 Description 描述30 Device 装置31 Do 执行32 DOE: Design of Experiments 实验设计33 Element 元素34 Engineering recbnology 工程技35 Environmental 环境36 Equipment 设备37 Estimated accumulative frequency 计算估计累计数38 E Equipment Variation 设备变异39 External Failure 外部失效,外部缺陷40 FA: Failure Analysis 失效分析41 Fact control 事实管理42 Fatigue 疲劳43 FMEA: Failure Mode and Effect Analysis失效模式与效果分析44 FP First-Pass Yield （第一次通过）合格率45 FQA: Final Quality Assurance 最终品质保证46 FQC: Final Quality control 最终品质控制47 Gauge system 测量系统48 Grade 等级49 Histogram 直方图50 Improvement 改善51 Initial review 先期审查52 Inspection 检验53 Internal Failure 内部失效、内部缺陷54 IPQC: In Process Quality Control 制程品质控制55 IQC: Incomming Quality Control 来料品质控制56 IS International Organization for Standardization 国际标准化组织57 LCL: Lower Control limit 管制下限58 LQC: Line Quality Control 生产线品质控制59 LSL: Lower Size Limit 规格下限60 Machine 机械61 Manage 管理62 Materials 物料63 Measurement 测量64 Median 中位数65 MSA: Measurement System Analysis 测量系统分析66 Occurrence 发生率67 Operation Instruction 作业指导书68 Organization 组织69 Parto 柏拉图70 PPM arts per Million （百万分之）不良率71 Plan 计划72 Policy 方针73 Population 群体74 PQA: Process Quality Assurance 制程品质保证75 Practice 实务(践)76 Prevention 预防77 Probability 机率78 Probability density function 机率密度函数79 Procedure 流程80 Process 过程81 Process capability analysis 制程能力分析（图）82 Process control and Process capability制程管制与制程能力83 Product 产品84 Production 生产85 Projects 项目86 QA: Quality Assurance 品质保证87 QC: Quality Control 品质控制88 QE: Quality Engineering 品质工程89 QFD: Quality Function Desgin 品质机能展开(法)90 Quality 质量91 Quality manual 品质手册92 Quality policy 品质政策(质量方针)93 Random experiment 随机试验94 Random numbers 随机数95 R:Range 全距（极差）96 Reject 拒收97 Repair 返修98 Repeatusility 再现性99 Reproducibility 再生性100 Requirement 要求101 Responsibilities 职责102 Review 评审103 Reword 返工104 Rolled yield 直通率105 RPN: Risk Priority Number 风险系数106 Sample 抽样,样本107 Sample space 样本空间108 Sampling with replacement 放回抽样109 Sampling without replacement 不放回抽样110 Scatter diagram 散布图分析111 Scrap 报废112 Simple random sampling 简单随机取样113 Size 规格114 SL: Size Line 规格中心线115 Stratified random sampling 分层随机抽样116 SOP: Standard Operation Procedure 标准作业书117 SPC: Statistical Process Control 统计制程管制118 Specification 规范119 SQA: Source(Supplier) Quality Assurance 供货商品质保证120 Stage sampling 分段随机抽样121 Standard Deviation 标准差122 Sum of squares 平方和123 Taguchi-method 田口(试验)方法124 Theory 原理125 TQC: Total Quality Control 全面品质控制126 TQM: Total Quality Management 全面品质管理127 Traceablity 追溯128 Training 培训129 UCL: Upper Control Limit 管制（控制）上限130 USL: Upper Size Limit 规格上限131 Validation 确认132 Variable 计量值133 Verification 验证134 Version 版本135 VOC: Voice of Customer 客户需求136 VOE: Voice of Engineer 工程需求137 Inventory stock report:庫存清单报告138 Sales order report:出货报告塑胶八大缺点：缩水，未射满，焦化，毛边，刮伤，污点，水口，色差另外还有：水纹，沾杂色，披锋，水泡一般用料为：ABS（较硬），PVC(较软)塑料材料在制程过程中须考虑缩水比例状况。
压力容器常用词汇和缩写中英文对照
缩写/ 英文/中文AB Anchor Bolt 地脚螺栓Abs Absolute 绝对的Abs Abstract 文摘、摘要A/C Account 帐、帐目AC Alternating Current 交流电Add Addendum 补充、补遗、附录ADL Acceptable Defect Level 允许的缺陷标准Adpt Adapter 连接器、接头AE Absolute Error 绝对误差AET Acoustic Emission Examination 声发射检验AISC American Institute of Steel Construction 美国钢结构学会AISI American Iron and Steel Institute 美国钢铁学会AL Aluminium 铝Alk Alkaline 碱的、强碱的ALM Alarm 报警Alt Alternate 交流、改变Amb Ambient 周围的Amt Amount 数量、金额Anh Anhydrous 无水的ANSI American National Standard Institute 美国国家标准学会API American Petroleum Institute 美国石油学会App Apparatus 设备App Appendix 附录、补遗Appl Applied 应用的Appl Applicable 适当的、合适的Approx Approximate 大约、近似Appx Appendix 附录、附件Arrgt Arrangement 布置AS Alloy steel 合金钢Asb Asbestos 石棉ASL Above Sea Level 海拔高度ASM American Society for Metals 美国金属学会ASME American Society of Mechanical Engineers 美国机械工程师学会Assem Assembly 装配ASTM American Society for Testing and Materials 美国材料试验学会Atm Atmosphere 大气atm Atmosphere pressure 大气压Auto Automatic 自动Aux Auxiliary 辅助设备、辅助的Avail Available 有效的、可用的Avg Average 平均AW Arc welding 电弧焊AW Automatic Welding 自动焊A.W.G. American Wire Gauge 美国线规AWS(AWI) American Welding Society(Institute) 美国焊接学会BAB Babbitt Metal 巴氏合金Baf Baffle 折流板、缓冲板BB Ball Bearing 滚珠轴承BC Between Centers 中心距、轴间距BC Bolt circle 螺栓中心圆BD Blow down 放空、放料BEDD Basic engineering design data 基础工程设计数据Bet Between 在…之间Bev Bevel 斜角、坡口BF Back face 背面、反面BF Blind flange 法兰盖（盲法兰）BHN Brinell hardness number 布氏硬度值BL Battery Limit 界区BL Battery Line 界区线B/L Bill of Loading 载荷数据表Bld Blind 盲板Blk Black 黑色Blk Blank 空白BM Bench Mark 基准标志BM Bending Moment 弯矩B/M (BOM) Bill of Material 材料表Bot Bottom 底BP Back Pressure 背压BP Base plate 底板BR Basic Requirements 基本要求BRG Bearing 轴承BRKT Bracket 支架Brs Brass 黄铜BS Both Side 两边BS British Standard 英国标准BS Balance Sheet 平衡表Bskt Basket 筐BTU British Thermal Unit 英国热量单位BV Back View 后视图BV Butterfly Valve 碟阀BW Brine Vater 冷冻盐水BW Butt Welding 对焊BWG Birmingham Wire Gauge 伯明翰线规BWRA. British Welding Research Association 英国焊接研究协会C Centigrade(degree) 摄氏度数CA Chemical Analysis 化学分析CA Corrosion Allowance 腐蚀裕量Calc Calculate 计算Cap Capacity 能力、容量CAS Cast Alloy Steel 铸造合金钢Cat Catalyst 触媒、催化剂Catg Catalog 目录、样本C-C(C/C) Center to center 中心距cc carbon copy 复写（纸复制）本cc cubic centimeter 立方厘米CCW Counter clockwise 反时针方向CD Cold Drawn 冷拉的、冷拔的CE Covered Electrode 焊条Cent Centrifugal 离心的CF Centrifugal Force 离心力CFW Continuous Fillet Weld 连续角焊缝CG Center of Gravity 重心CH Case-Hardening 表面硬化Ch Chapter 章节Cham Chamfer 倒角、斜角、斜面Chan Channel 通道、沟槽、管箱、槽钢Chk Check 检查CI Cast Iron 铸铁CIF Cost，Insurance and Freight 到岸价格Circ Circumference 圆周、环向CL Class 等级、类别CL Center Line 中心线CL Clearance 间隙CLAS Cast Low Alloy Steel 低合金铸钢CM Center of Mass 质量中心Cnds Condensate 冷凝液CO Clean Out 清除Co Company 公司Coef Coefficient 系数Col Column 柱、塔Comb Combination 组合Comp Compare 比较Comp Compound 化合物、复合的Compn Composition 组分Conc Concrete 混凝土Conc Concentration 浓度Cond Conductor 导体Cond Condition 条件Conn Connection 联接、接口Const Constant 常数、恒定的Const Construction 结构Cont Control 控制Cont Contain 包含Cont Content 内容、含量Corp Corporation 公司Corr Corrosion 腐蚀CP Centipoise 厘泊CP Center of Pressure 压力中心Cpl Coupling 管箍Cplg Coupling 联轴节CR Chloroprene Rubber 氯丁橡胶CS Carbon Steel 碳钢CS Center Section 中心截面CSTG Casting 铸造、铸件Ctr Center 中心CW Cooling Water 冷却水CW Continuous Welding 连续焊Cy Cycle 循环Cyl Cylinder 气缸、圆筒D Density 密度Dbl Double 二倍、双DEDD Detail Engineering Design Data 详细工程设计数据Def Definition 定义Deg Degree 度、等级Dept Department 部门Des Design 设计Det Detail 详细Detn Determination 确定、决定Dev Deviation 偏差Dev Device 装置DF Design Formula 设计公式Df Deflection 偏斜Dia Diameter 直径Diag Diagram 图Dim Dimension 尺寸Dir Direction 方向Disch Discharge 排出、出口Distr Distribution 分布Div Division 部分、区分DL Dead load 静载荷、自重Doc Document 文件、资料DP Design Pressure 设计压力DP Differential Pressure 压差、分压Dr Drill 钻孔Dr Drive 驱动DW Dead weight 静重、自重DW Demineralized Water 脱盐水Dwg Drawing 图E East 东EC Elasticity Coefficient 弹性系数Ecc Eccentric 偏心EF Electric Furnace 电炉Eff Efficiency 效率eg exempli gratia 例如EHP Effective Horsepower 有效功率EJ Expansion joint 膨胀节EL Elevation 标高Elb Elbow 弯头Elec Electric 电的Elem Element 元素、元件Ellip Ellipsoidal 椭球的、椭圆的Emer、Emerg Emergency 事故、紧急Encl Enclosure 密封、封闭Engrg、Eng Engineering 工程、设计EP Explosion Proof 防爆Eq Equipment 设备Eq Equation 公式、方程式Eq Equivalent 当量ES Electrostatic 静电EST Estimate 估计ESW Electro-Slag Welding 电渣焊ET Eddy Current Examination 涡流检验etc et cetera (and so on) 等等Evap Evaporate 蒸发Ex Example 例如Ex Excess 过剩、超过Exam Examination 检验Exh Exhaust 废气、排气Exp Expansion 膨胀Exptl Experimental 实验的Ext External 外部Ext Extreme 极端的FAO Finish All Over 全部加工FAX Facsimile 传真FB Flat Bar 扁钢FCAW Flux Cored Arc Welding 熔剂芯弧焊（手工焊）Fdn Foundation 基础FDW Feed Water 给水FF Flat Face 平面F/F Field Fabricated 现场制造Fig Figure 图Fin Finish 加工、完成FL Full Load 满载Flex Flexible 挠性Flg Flange 法兰FOB Free On Board 离岸价格FOC Free Of Charge 免费Forg Forging 锻件FOS Factor Of Safety 安全系数FREQ Frequency 频率FST Forged Steel 锻钢Ft Feet 英尺Ftg Fitting 管件、装配F.V. Full Vacuum 全真空FW Fresh Water 新鲜水FW Field Weld 现场焊接FW Fillet Weld 角焊缝GA General Average 平均值Gal Gallon 加仑Gen General 一般、总的Genr Generator 发电机、发生器GF Groove Face 槽面Gl Glass 玻璃GL Ground Level 地面标高GMAW Gas Metal Arc Welding 气体保护金属极电弧焊Gnd Ground 接地、地面Govt Government 政府GP General Purpose 一般用途、通用Gr Grade 等级Gr Gravity 重力Grd Ground 地面Grp Group 分组、类Gr- wt Gross weight 总重、毛重HB Brinell Hardness 布氏硬度HC Hydrocarbon 烃类HC High Capacity 大容量HD Head 压头Hex Hexagon 六角HH Hand Hole 手孔Hor Horizontal 水平、卧式hp Horsepower 马力HP High Pressure 高压HR Rockwell Hardness 洛氏硬度HR(hr) Hour 小时HRC Rockwell C Hardness C级洛氏硬度HS High Pressure Steam 高压蒸汽HS Shore Scleroscope Hardness 肖氏硬度HSC High Pressure Condensate 高压蒸汽凝液HT High Temperature 高温HT Heat Treatment 热处理HT Hydrostatic Test 水压试验HV Vickers Hardness 维氏硬度Hvy Heavy 重的、重型的HW Hot Water 热水ICW Inter Cooling Water 中间冷却水ID Inside Diameter 内径IF Interface 交接面Illus Illustration 说明、图解IN Inlet 进口in Inch 英寸incl Including 包括Ind Indicate 指示Ins Insulation 保温INSP Inspection 检验Instl Installation 安装Int Internal 内部的Int Intermediate 中间的Intmt Intermittent 间歇的、间断的I/O Input/Output 输入/输出Jt Joint 连接、接头KG Kilogram 公斤KW(kw) Kilowatt 千瓦LAS Low Alloy Steel 低合金钢lb pound 磅LC Level Control 液位控制器Leng Length 长度LF Female Face 凹面Lg Long 长的LG Level Glass 液位计LH Left Hand 左手Lin Linear 线性的Liq Liquid 液体Lj Lap joint 搭接LJ Lapped Joint 松套LM Male Face 凸面LMTD Logarithmic Mean Temperature Difference 对数平均温差LN Liquid Nitrogen 液氮LN Level Normal 正常液位Lng Lining 衬里LNG Liquefied Natural Gas 液化天然气Lo Lubrication oil 润滑油Lo Low 低LOA Length Over-All 全长\总长LOC Location 位置Log Logarithm(to the base 10) 对数（以10为底）Long Longitudinal 纵向LP Low Pressure 低压LPG Liquefied Petroleum Gas 液化石油气LT Low Temperature 低温LT Leak Testing 气密试验Ltd Limited 有限Ltr Letter 字母、信Lub Lubricate 润滑LW Lap Welding 搭接焊LWN Long Welding Neck 对焊长颈LWS Longitudinal Welded Seam 纵向焊缝M(m) Meter 米、公尺Mach Machine 机器Maint Maintenance 维修Mat(Mat’l) Material 材料MAWP Maximum Allowable Working Pressure 最大允许工作压力Max Maximum 最大MDMT Min. Design Metallic Temperature 最低设计金属温度Mech Mechanical 机械的Mfd Manufactured 制造的Mfr Manufacturer 制造商MG(mg) Milligram 毫克MH Manhole 人孔MI Melt Index 熔融指数MIG Metal Inert Gas Arc Welding 熔化极惰性气体保护焊Min Minimum 最小MIN(min) Minute 分钟MJG Metallic Jacketed Gasket 金属包复垫片Mk Mark 标志ml Milliliter 毫升mm Millimeter 毫米MP Medium Pressure 中压MPC Maximum Permissible Concentration 最大许用浓度MS Medium Pressure Steam 中压蒸汽MS Medium Steel 中碳钢MSL Mean Sea Level 平均海平面MT Magnetic Particle Examination 磁粉检测MTD Mean Temperature Difference 平均温差Mtd Mounted 安装、装配MTR Material Testing Report 材料试验报告MU Measurement Unit 测量单位MV Mean Value 平均值MW Mineral Wool 矿渣棉N North 北NA Not Applicable 不适用的NAT Natural 天然的Natl National 国家的NC America National Coarse Thread 美制粗牙螺纹NDT Nondestructive Testing 无损检验Neg Negative 负NF American National Fine Thread 美国细牙螺纹Nip Nipple 螺纹管接头、短节Nom Nominal 名义Nor Normal 正常NOZ Nozzle 接管NPS American Standard Straight Pipe Thread 美国标准直管螺纹NPSHA Net Positive Suction Head Available 有效汽蚀裕量NPSHR Net Positive Suction Head Required 要求汽蚀裕量NPT American Standard T aper Pipe Thread 美国标准锥管螺纹NT Net Tonnage 净吨数NTP Normal Temperature and Pressure 标准温度和压力NTS Not To Scale 不按比例Num Number 数、编号、号码Obj Object 目标、对象OC Operating Characteristic 操作特性OD Outside Diameter 外径OH Open Hearth 平炉Oper Operating 操作Opp Opposite 对面、相反OR Outside Radius 外半径OR Outside Ring 外环Orien Orientation 方位Ovhd Overhead 高架的、顶部的Oxyg Oxygen 氧P Page 页P Pressure 压力Par Parallel 平行Para Paragraph 节、段Pc Piece 件PE Polyethylene 聚乙烯PFD Process Flow Diagram 工艺流程图Perform Performance 性能PF Power Factor 功率因素PID Piping & Instruments Diagram 管道和仪表流程图Pl Plate 板Pneum Pneumatic 气、气动PO Purchase Order 订货单Port Portable 便携式、轻便Posit Positive 正Posit Position 位置ppb Parts per billion 十亿分之几ppm Parts per million 百万分之几Prod Product 产品Proj Project 项目、工程PS Polystyrene 聚苯乙烯psf Pounds per square feet 磅/平方英尺psi Pounds per square inch 磅/平方英寸PT Liquid Penetrants Examination 液体渗透检测PTFE Polytetrafluoroethylene 聚四氟乙烯PVA Polyvinyl Acetate 聚醋酸乙烯PVAL Polyvinyl Alcohol 聚乙烯醇PVC Polyvinyl Chloride 聚氯乙烯PWHT Post Weld Heat Treatment 焊后热处理QA Quality Assurance 质量保证QC Quality Control 质量控制Qty Quantity 数量Qual Quality 质量R Radius 半径Rad Radial 径向RC Rockwell Hardness 洛氏硬度Recip Reciprocate 往复式Recirc Recirculate 再循环Recom Recommended 建议、推荐Ref Reference 参照、基准Refract Refractory 耐火材料Reg Regulator 调节器Regen Regenerator 再生器、再生塔Reinf Reinforce 加强Rel Relative 相对Rep Report 报告Rep Repeat 重复Reqd Required 要求、需要的REV Revision 修改、版次Rev Review 评论、检查Rev Revolution 旋转、转数RF Raise face 突台面RH Relative Humidity 相对湿度RH Right Hand 右手RMS Root Mean Square 均方根ROT Rotating 旋转rpm revolutions per minute 转/分rps revolutions per second 转/秒RT Radiographic Examination 射线照相检验S South 北SAW Submerged Arc Welding 埋弧焊Sc Scale 刻度、比例SC Standard Condition 标准状态（温度压力）SCH Schedule 表号、管厚号、进度Sec Second 秒Sec Section 剖面、节、段Seg Segment 节、段Sep Separator 分离器Seq Sequence 次序、顺序SG Specific Gravity 比重SHP Shaft Horsepower 轴马力SI Standard International 国际单位制Sig Signal 信号Sld Solid 固体SMAW Shield Metal Arc Welding 手工焊Smls Seamless 无缝的SO Slip on 平焊（法兰）Sol Solution 溶液SP Spare parts 备件Sp Special 特殊的、专门的SP Static pressure 静压力Spec Specification 说明、规定SpGr Specific Gravity 比重Sq Square 方形、平方SR Stress Relief 消除应力SS Stainless Steel 不锈钢Sta Station 站STD Standard 标准STDWT Standard Weight 标准重量STL Steel 钢STP Standard Temperature and Pressure 标准温度和压力Suc Suction 吸入Suppl Supplement 补充SW Shop Welding 车间焊接SW Spot Weld 点焊SW Socket Welding 承插焊（法兰）SWP Safety Working Pressure 安全工作压力SYM Symbol 符号、标志SYM Symmetry 对称SYS System 系统T Ton 吨TC Tungsten Carbide 碳化钨Tech Technique 技术TEMA Tubular Exchanger Manufacturers Association 管壳式换热器制造商协会（美国）Temp Temperature 温度Term Terminal 终端、接头Thk Thickness 厚度TIG Tungsten Inert Gas Arc Welding 钨极惰性气体保护焊TL Tangent line 切线Tol Tolerance 公差Tot Total 总Trans Transfer 输送器TW Total Weight 总重TW Tack Welding 定位焊Typ Typical 典型、标准UNC Unified National Coarse Thread 统一标准粗牙螺纹UNF Unified National Fine Thread 统一标准细牙螺纹US Undersize 尺寸过小UT Ultrasonic Examination 超声波探伤UTS Ultimate Tensile Strength 抗拉强度极限Vac Vacuum 真空Vap Vapor 蒸汽Var Variable 变化、变量Vel Velocity 速度Vert Vertical 垂直Vol Volume 体积VT Visual Testing 宏观（目测）检查W Watt 瓦WL Welding Line 焊缝线WL Water Line 水线WPS Welding Procedure Specification 焊接工艺规程WP Working Pressure 工作压力WRC Welding Research Committee 焊接研究委员会（美国）WS Water Supply 供水WT Weight 重量W/V Wind Velocity 风速XR X-Ray X射线Yd Yard 码YP Yield Point 屈服点Yr Year 年。
中英文APQP计表
Part Name Part Number BeStar Part No. Team Members Company/Title Design Type
New
Date: Review No.: Design level:
产 ห้องสมุดไป่ตู้ 设 计 和 开 发
Equipment & Tooling/Fixture Requirment
(生产设备,工装,夹具清单）(新设备.工装和试验设备检查清单)
Inspection Specification (检验规范 IQC,OQC,材料试验结果) Prototype Build（样件制造-试样记录表） Dimension Test（全尺寸检验30pcs样品） Capability Test （全性能检验30pcs样品） Environment Test （环境试验,每组5只样） Design Review Plan（设计验证） Send Prototype to Customer(样品给客户确认) The second stage review report( 第二阶段评审报告) The grade of supplier's parocuction ( 供应商零件生产件批 准等级) Manufacturing Process Flow ( 生产 流程图,生产线布置图,车间平面图) Process FMEA(过程失效模式及后果分析) Pre-Launch Production Control Plan (试生产控制计划) Operator Process Instructions( 试生产SOP) Dunnage & Packaging Signoff( 包装规范) Measurement Systems Evaluation Plan (测量系统分析研究计划MSA) Preliminary Process Capability Study Plan (初始过程能力研究计划PPK) The third stage review report( 第三阶段评审报告) Production Trial Run(试生产)
服装产品尺寸测量培训资料
前胸口袋各部位尺寸测量标准 Measurement standard for chest
pocket dimensions
Flag Anthem 口袋距肩缝高：依据工艺单尺寸表，自肩缝高点到袋口量， 尺寸
误差允许± 1/4”
RAILS 前胸口袋距肩 高点：
依据工艺单尺寸 表，自肩顶点到 袋口量， 尺寸误 差允许± 1/4”
尺寸误差允 许± 1/4”
袖克夫、袖叉各部位尺寸测量标准 Measurement standard of sleeve cuff
and sleeve placket
RAILS 袖克夫宽：
依据工艺单 尺寸表， 尺
寸误差允许 ± 1/8”
RAILS 袖克夫高：
依据工艺单 尺寸表， 尺
寸误差允许 ± 1/8”
许± 1/4”
RAILS 领宽：依据工艺单尺寸表，领宽自领缝到领缝量， 尺寸误差允许
± 1/4”
质量在心中 品质在手中
领围尺寸测量标准 Measurement standard of collar
circumference
Flag Anthem 上领边长：依据工艺单尺寸表， 尺寸误差允许± 1/4”
依据工艺单尺寸 表，领缝到领缝 平量领宽尺寸， 尺寸误差允许±
1/4”
Flag Anthem 领宽：
依据工艺单尺 寸表，领缝到 领缝量领宽尺 寸， 尺寸误 差允许± 1/4”
RAILS 领宽：依据工艺单尺寸表，领宽自领边到领边量， 尺寸误差
允许± 1/4”
RAILS 领宽：依据工艺单尺寸表，领宽自领边到领边量， 尺寸误差允
PISTOLA 前衣长：
依据工艺单尺寸 表上的过肩尺寸， 从肩高点至前中 门襟下摆边处斜 量前衣长尺寸， 尺寸误差允许±
dimension 翻译
dimension 翻译基本解释●dimension：维度，尺寸，方面●/dɪˈmenʃən/●n. 维度，尺寸，方面变化形式●n. 复数形式：dimensions具体用法●●名词:oo意思1: 维度，尺寸ooo同义词: size, magnitude, extent, measurement, scaleooo反义词: insignificance, triviality, unimportance, smallness, minutenessooo例句：●The dimension of the room was larger than I had anticipated,allowing for more furniture to be placed comfortably. (房间的尺寸比我预期的要大，可以舒适地放置更多的家具。
)●Engineers must consider the dimensions of the materials theyuse to ensure the structure's stability and safety. (工程师必须考虑他们使用的材料的尺寸，以确保结构的稳定性和安全性。
)●The artist played with the dimensions of the canvas to createa unique visual effect that captivated the audience. (艺术家利用画布的尺寸创造出独特的视觉效果，吸引了观众。
)●In mathematics, understanding the concept of dimensions iscrucial for solving complex problems involving space andvolume. (在数学中，理解维度的概念对于解决涉及空间和体积的复杂问题至关重要。
阀门术语
阀门术语BW Butt Welding 对焊BWG Birmingham Wire Gauge 伯明翰线规BWRA. British Welding Research Association 英国焊接研究协会C Centigrade(degree) 摄氏度数CA Chemical Analysis 化学分析CA Corrosion Allowance 腐蚀裕量Calc Calculate 计算Cap Capacity 能力、容量CAS Cast Alloy Steel 铸造合金钢Cat Catalyst 触媒、催化剂Catg Catalog 目录、样本C-C(C/C) Center to center 中心距cc carbon copy 复写（纸复制）本cc cubic centimeter 立方厘米CCW Counter clockwise 反时针方向CD Cold Drawn 冷拉的、冷拔的CE Covered Electrode 焊条Cent Centrifugal 离心的CF Centrifugal Force 离心力CFW Continuous Fillet Weld 连续角焊缝CG Center of Gravity 重心CH Case-Hardening 表面硬化Ch Chapter 章节Cham Chamfer 倒角、斜角、斜面Chan Channel 通道、沟槽、管箱、槽钢Chk Check 检查CI Cast Iron 铸铁CIF Cost， Insurance and Freight 到岸价格Circ Circumference 圆周、环向CL Class 等级、类别CL Center Line 中心线CL Clearance 间隙CLAS Cast Low Alloy Steel 低合金铸钢CM Center of Mass 质量中心Cnds Condensate 冷凝液CO Clean Out 清除Co Company 公司Coef Coefficient 系数Col Column 柱、塔Comb Combination 组合Comp Compare 比较Comp Compound 化合物、复合的Compn Composition 组分Conc Concrete 混凝土Conc Concentration 浓度Cond Conductor 导体Cond Condition 条件Conn Connection 联接、接口Const Constant 常数、恒定的Const Construction 结构Cont Control 控制Cont Contain 包含Cont Content 内容、含量Corp Corporation 公司Corr Corrosion 腐蚀CP Centipoise 厘泊CP Center of Pressure 压力中心Cpl Coupling 管箍Cplg Coupling 联轴节CR Chloroprene Rubber 氯丁橡胶CS Carbon Steel 碳钢CS Center Section 中心截面CSTG Casting 铸造、铸件Ctr Center 中心CW Cooling Water 冷却水CW Continuous Welding 连续焊Cy Cycle 循环Cyl Cylinder 气缸、圆筒D Density 密度Dbl Double 二倍、双DEDD Detail Engineering Design Data 详细工程设计数据Def Definition 定义Deg Degree 度、等级Dept Department 部门Des Design 设计Det Detail 详细Detn Determination 确定、决定Dev Deviation 偏差Dev Device 装置DF Design Formula 设计公式Df Deflection 偏斜Dia Diameter 直径Diag Diagram 图Dim Dimension 尺寸Dir Direction 方向Disch Discharge 排出、出口Distr Distribution 分布Div Division 部分、区分DL Dead load 静载荷、自重Doc Document 文件、资料DP Design Pressure 设计压力DP Differential Pressure 压差、分压Dr Drill 钻孔Dr Drive 驱动DW Dead weight 静重、自重DW Dead weight 静重、自重DW Demineralized Water 脱盐水Dwg Drawing 图E East 东EC Elasticity Coefficient 弹性系数Ecc Eccentric 偏心EF Electric Furnace 电炉Eff Efficiency 效率eg exempli gratia 例如EHP Effective Horsepower 有效功率EJ Expansion joint 膨胀节EL Elevation 标高Elb Elbow 弯头Elec Electric 电的Elem Element 元素、元件Ellip Ellipsoidal 椭球的、椭圆的Emer、Emerg Emergency 事故、紧急Encl Enclosure 密封、封闭Engrg、Eng Engineering 工程、设计EP Explosion Proof 防爆Eq Equipment 设备Eq Equation 公式、方程式Eq Equivalent 当量ES Electrostatic 静电EST Estimate 估计ESW Electro-Slag Welding 电渣焊ET Eddy Current Examination 涡流检验etc et cetera (and so on) 等等Evap Evaporate 蒸发Ex Example 例如Ex Excess 过剩、超过Exam Examination 检验Exh Exhaust 废气、排气Exp Expansion 膨胀Exptl Experimental 实验的Ext External 外部Ext Extreme 极端的FAO Finish All Over 全部加工FAX Facsimile 传真FB Flat Bar 扁钢FCAW Flux Cored Arc Welding 熔剂芯弧焊（手工焊）Fdn Foundation 基础FDW Feed Water 给水FF Flat Face 平面F/F Field Fabricated 现场制造Fig Figure 图Fin Finish 加工、完成FL Full Load 满载Flex Flexible 挠性F l g Flange 法兰FOB Free On Board 离岸价格FOC Free Of Charge 免费Forg Forging 锻件FOS Factor Of Safety 安全系数FREQ Frequency 频率FST Forged Steel 锻钢Ft Feet 英尺Ftg Fitting 管件、装配F.V. Full Vacuum 全真空FW Fresh Water 新鲜水FW Field Weld 现场焊接FW Fillet Weld 角焊缝GA General Average 平均值Gal Gallon 加仑Gen General 一般、总的Genr Generator 发电机、发生器GF Groove Face 槽面Gl Glass 玻璃GL Ground Level 地面标高GMAW Gas Metal Arc Welding 气体保护金属极电弧焊Gnd Ground 接地、地面Govt Government 政府GP General Purpose 一般用途、通用Gr Grade 等级Gr Gravity 重力Grd Ground 地面Grp Group 分组、类Gr- wt Gross weight 总重、毛重HB Brinell Hardness 布氏硬度HC Hydrocarbon 烃类HC High Capacity 大容量HD Head 压头Hex Hexagon 六角HH Hand Hole 手孔Hor Horizontal 水平、卧式hp Horsepower 马力HP High Pressure 高压HR Rockwell Hardness 洛氏硬度HR(hr) Hour 小时HRC Rockwell C Hardness C级洛氏硬度HS High Pressure Steam 高压蒸汽HS Shore Scleroscope Hardness 肖氏硬度HSC High Pressure Condensate 高压蒸汽凝液HT High Temperature 高温HT Heat Treatment 热处理HT Hydrostatic Test 水压试验HV Vickers Hardness 维氏硬度Hvy Heavy 重的、重型的HW Hot Water 热水ICW Inter Cooling Water 中间冷却水ID Inside Diameter 内径IF Interface 交接面Illus Illustration 说明、图解IN Inlet 进口in Inch 英寸incl Including 包括Ind Indicate 指示Ins Insulation 保温INSP Inspection 检验Instl Installation 安装Int Internal 内部的Int Intermediate 中间的Intmt Intermittent 间歇的、间断的I/O Input/Output 输入/输出Jt Joint 连接、接头KG Kilogram 公斤KW(kw) Kilowatt 千瓦LAS Low Alloy Steel 低合金钢lb pound 磅LC Level Control 液位控制器Leng Length 长度LF Female Face 凹面Lg Long 长的LG Level Glass 液位计LH Left Hand 左手Lin Linear 线性的Liq Liquid 液体Lubrication oil 润滑油Lo Low 低LOA Length Over-All 全长\总长LOC Location 位置Log Logarithm(to the base 10) 对数（以10为底）Long Longitudinal 纵向LP Low Pressure 低压LPG Liquefied Petroleum Gas 液化石油气LT Low Temperature 低温LT Leak Testing 气密试验Ltd Limited 有限Ltr Letter 字母、信Lub Lubricate 润滑LW Lap Welding 搭接焊LWN Long Welding Neck 对焊长颈LWS Longitudinal Welded Seam 纵向焊缝M(m) Meter 米、公尺Mach Machine 机器Maint Maintenance 维修Mat(Mat’l) Material 材料MAWP Maximum Allowable Working Pressure 最大允许工作压力Max Maximum 最大MDMT Min. Design Metallic Temperature 最低设计金属温度Mech Mechanical 机械的Mfd Manufactured 制造的Mfr Manufacturer 制造商MG(mg) Milligram 毫克MH Manhole 人孔MI Melt Index 熔融指数MIG Metal Inert Gas Arc Welding 熔化极惰性气体保护焊Min Minimum 最小MIN(min) Minute 分钟MJG Metallic Jacketed Gasket 金属包复垫片Mk Mark 标志ml Milliliter 毫升mm Millimeter 毫米MP Medium Pressure 中压MPC Maximum Permissible Concentration 最大许用浓度MS Medium Pressure Steam 中压蒸汽MS Medium Steel 中碳钢MSL Mean Sea Level 平均海平面MT Magnetic Particle Examination 磁粉检测MTD Mean Temperature Difference 平均温差Mtd Mounted 安装、装配MTR Material Testing Report 材料试验报告MU Measurement Unit 测量单位MV Mean Value 平均值MW Mineral Wool 矿渣棉N North 北NA Not Applicable 不适用的NAT Natural 天然的Natl National 国家的NC America National Coarse Thread 美制粗牙螺纹NDT Nondestructive Testing 无损检验Neg Negative 负NF American National Fine Thread 美国细牙螺纹Nip Nipple 螺纹管接头、短节Nom Nominal 名义Nor Normal 正常NOZ Nozzle 接管NPS American Standard Straight Pipe Thread 美国标准直管螺纹NPSHA Net Positive Suction Head Available 有效汽蚀裕量NPSHR Net Positive Suction Head Required 要求汽蚀裕量NPT American Standard Taper Pipe Thread 美国标准锥管螺纹NT Net Tonnage 净吨数NTP Normal Temperature and Pressure 标准温度和压力NTS Not To Scale 不按比例Num Number 数、编号、号码Obj Object 目标、对象OC Operating Characteristic 操作特性OD Outside Diameter 外径OH Open Hearth 平炉Oper Operating 操作Opp Opposite 对面、相反OR Outside Radius 外半径OR Outside Ring 外环Orien Orientation 方位Ovhd Overhead 高架的、顶部的Oxyg Oxygen 氧P Page 页P Pressure 压力Par Parallel 平行Para Paragraph 节、段Pc Piece 件PE Polyethylene 聚乙烯PFD Process Flow Diagram 工艺流程图Perform Performance 性能PF Power Factor 功率因素PID Piping & Instruments Diagram 管道和仪表流程图Pl Plate 板Pneum Pneumatic 气、气动PO Purchase Order 订货单Port Portable 便携式、轻便Posit Positive 正Posit Position 位置ppb Parts per billion 十亿分之几ppm Parts per million 百万分之几Prod Product 产品Proj Project 项目、工程PS Polystyrene 聚苯乙烯psf Pounds per square feet 磅/平方英尺psi Pounds per square inch 磅/平方英寸PT Liquid Penetrants Examination 液体渗透检测PTFE Polytetrafluoroethylene 聚四氟乙烯PVA Polyvinyl Acetate 聚醋酸乙烯PVAL Polyvinyl Alcohol 聚乙烯醇PVC Polyvinyl Chloride 聚氯乙烯PWHT Post Weld Heat Treatment 焊后热处理QA Quality Assurance 质量保证QC Quality Control 质量控制Qty Quantity 数量Qual Quality 质量R Radius 半径Rad Radial 径向RC Rockwell Hardness 洛氏硬度Recip Reciprocate 往复式Recirc Recirculate 再循环Recom Recommended 建议、推荐Ref Reference 参照、基准Refract Refractory 耐火材料Reg Regulator 调节器Regen Regenerator 再生器、再生塔Reinf Reinforce 加强Rel Relative 相对Rep Report 报告Rep Repeat 重复Reqd Required 要求、需要的REV Revision 修改、版次Rev Review 评论、检查Rev Revolution 旋转、转数RF Raise face 突台面RH Relative Humidity 相对湿度RH Right Hand 右手RMS Root Mean Square 均方根ROT Rotating 旋转rpm revolutions per minute 转/分rps revolutions per second 转/秒RT Radiographic Examination 射线照相检验S South 北SAW Submerged Arc Welding 埋弧焊Sc Scale 刻度、比例SC Standard Condition 标准状态（温度压力）SCH Schedule 表号、管厚号、进度Sec Second 秒Sec Section 剖面、节、段Seg Segment 节、段Sep Separator 分离器Seq Sequence 次序、顺序SG Specific Gravity 比重SHP Shaft Horsepower 轴马力SI Standard International 国际单位制Sig Signal 信号Sld Solid 固体SMAW Shield Metal Arc Welding 手工焊Smls Seamless 无缝的SO Slip on 平焊（法兰）Sol Solution 溶液SP Spare parts 备件Sp Special 特殊的、专门的SP Static pressure 静压力Spec Specification 说明、规定SpGr Specific Gravity 比重Sq Square 方形、平方SR Stress Relief 消除应力SS Stainless Steel 不锈钢Sta Station 站STD Standard 标准STDWT Standard Weight 标准重量STL Steel 钢STP Standard Temperature and Pressure 标准温度和压力Suc Suction 吸入Suppl Supplement 补充SW Shop Welding 车间焊接SW Spot Weld 点焊SW Socket Welding 承插焊（法兰）SWP Safety Working Pressure 安全工作压力SYM Symbol 符号、标志SYM Symmetry 对称SYS System 系统T Ton 吨TC Tungsten Carbide 碳化钨Tech Technique 技术TEMA Tubular Exchanger Manufacturers Association 管壳式换热器制造商协会（美国）Temp Temperature 温度Term Terminal 终端、接头Thk Thickness 厚度TIG Tungsten Inert Gas Arc Welding 钨极惰性气体保护焊TL Tangent line 切线Tol Tolerance 公差Tot Total 总Trans Transfer 输送器TW Total Weight 总重TW Tack Welding 定位焊Typ Typical 典型、标准UNC Unified National Coarse Thread 统一标准粗牙螺纹UNF Unified National Fine Thread 统一标准细牙螺纹US Undersize 尺寸过小UT Ultrasonic Examination 超声波探伤UTS Ultimate Tensile Strength 抗拉强度极限Vac Vacuum 真空Vap Vapor 蒸汽Var Variable 变化、变量Vel Velocity 速度Vert Vertical 垂直Vol Volume 体积VT Visual Testing 宏观（目测）检查W Watt 瓦WL Welding Line 焊缝线WL Water Line 水线WPS Welding Procedure Specification 焊接工艺规程WP Working Pressure 工作压力WRC Welding Research Committee 焊接研究委员会（美国）WS Water Supply 供水WT Weight 重量W/V Wind Velocity 风速XR X-Ray X射线Yd Yard 码YP Yield Point 屈服点Yr Year 年工艺管道这应该是工艺管线管子的描述,PIPE是指管子,SMLS是SEAMLESS指无缝,SAW是Submerged-Arc Welding指埋弧自动焊，ERW指电阻焊，EFW指电融焊，都是有缝管。
质量术语简介
质量术语一、品质人员名称类QC quality control 品质管理人员FQC final quality control 最终检查IPQC in process quality control 线上巡检OQC output quality control 出货检查IQC incoming quality control 进料检查TQC total quality control 全面质量管理PQC passage quality control 分段检查QA quality assurance 品保OQA output quality assurance 出货品保QE quality engineer 品质工程人员QM Quality management 品质管理二、品质保证类FAI first article inspection 首样检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SQA standardized supplier quality 合格供货商品质评估AVL approved render list 合格供应商名单OBA out of box audit 开箱检查QFD quality function deployment 品质机能展开FMEA failure model effectiveness analysis 失效模式分析8 disciplines 8 项回复内容FA final audit 最后一次稽核CAR corrective action request 改善要求corrective action report 改善报告三、FQC运作类AQL Acceptable Quality Level 允收品质水准S/S Sample size 抽样检验样本大小ACC Accept 允收REJ Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的Pending暂停AOQ Average Output Quality 平均出厂品质AOQL Average Output Quality Level 平均出厂品质Q/R/S Quality/Reliability/Service 品质/可靠度/服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水准等级P/N Part Number 料号L/N Lot Number 批号AOD Accept On Deviation 特采UAI Use As It 特采FPIR First Piece Inspection Report 首件检查报告PPM PercentPer Million 百万分之一DPPM 百万分之一的缺陷率四、制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR AverageRange 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限LCL Lower Control Limit 下控制限UCL Upper Control Limit 上控制限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具的再现性和重复性DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数五、其它品质术语类QCC Quality Control Circle 品质圈QIT QualityImprovementTeam品质改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 品质改善QP Quality Policy 品质方针QT QualityTarget 品质目标TQM Total Quality Management全面品质管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低品质水准RMA Return Material Audit 退料认可ADM Absolute Dimension Measurement 全尺寸测量7QCT 7 Quality Control Tools 品管七大手法六、常用缩略词语ES Engineering Specification 工程规范KCC Key Control Characteristic 关键控制特性KPC Key Product Characteristic 关键产品特性OEM Original Equipment Manufacturer 整车厂DOE Design of Experiment 试验设计DVP&R Design verification Plan and Report 设计验证计划和报告FTC First Time Capability 首次生产能力TGR Things Gone Right 运行情况良好TGW Things Gone Wrong 运行情况不良VE/VA ValueE ngineering/ValueAnalysis 价值工程/价值分析BOM Bill of Material 物料清单Cpk Capability for stable process 稳定过程的能力指数Ppk The performance index 性能指数LSL Lower Specification Limit 工程规范下限USL Upper Specification Limit 工程规范上限MRB Material Review Board 物料评审PSW Part Submission Warrant 零件提交保证书AAR Appearance Approval Report 外观件批准报告PTR ProductionTrial Run(Report) 试生产(报告)CDF Construction Data Form 结构数据表EB Engineering Build 工程试产MB Manufacture Build 工艺试产MP Mass Production 大货PP Production pilot 小批量试制NPD New Product Development 新产品开发ESB 试模BIQ built in quality 制造质量七、通用件类ECN Engineering Change Notes 工程变更通知(供货商) ECO Engineering Change Order 工程改动要求(客户) PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP standard inspection procedure 检验标准规范SOP StandardOperationProcedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面7 Tools of Quality鱼骨图：characteristic diagram层别法：stratfication柏拉图：paeto diagram查验表：check list散步图：scatter diagram直方图：histogram 管制图：control chart。
PCB 出货检验报告模板
/Finished CopperTickness(um)
表面处理类型
/SurfaceTreatment Type
厚度(um)
RoHS
满足RoHS
成品包装/Package
包装要求
周期/Date Code
备注:UAI时须由工程与品质主管共同签字确认后出货NO:CS-WI-QA-012-2/0
Routing
Punching
No.
Nominal
Dimension
USL
USL
S1
S2
S3
S4
S5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Disposition
Acc
Acc
Acc
Acc
Acc
3.0 V-CUT DIMENSION/V-CUT尺寸(Unit: mm)
Item
Requirement
S1
客户名称/Customer
客户型号/Part Number
本厂编号/Project
出货数/Shipped QTY
抽查数/InspectQTY
检验项目/Inspection Items
要求/Specification
结果/Results
接收/ACC
拒收/Rej
板材/CCL
型号/Type
板材商/Suppliers
1.2±0.13mm
Max.
Acc
Min.
Max.Warpage≤0.75%
Acc
2.0 OUTLINE DIMENSION/外形尺寸(mm)Please refer to the attached drawing for the measurement positions.