球阀—产品使用说明书

Ball valves

球阀使用说明书

Ball Valve Operating Manual

）

浙江石化阀门有限公司

Zhejiang Petrochemical Valve Co., Ltd.

二O一一年 Year 2011

、

一用途

Application

球阀是一种管线阀门产品，用于接通或截断管路中的介质。一般是处于全开或全关状态，在微开状态下可作流量的调节使用。广泛适用于工况条件下水、气、油品等介质

的各种管路中。

Ball valve is pipeline valve, used for connecting or cutting off medium in the pipelines. Normally it is at the state of opening or closing. And it could

function as regulating the flow when it is at the state of slightly open. It is

used on the pipeline such as water, gas, oil etc.

二性能规范 Performance Specification

压力等级： Class150； Class300； Class600；

Pressure: Class150； Class300； Class600；

公称尺寸：NPS 2 ～NPS24；

Nominal Size: NPS 2 ～NPS24

、

阀体材料： ASTM A216 WCB； ASTM A351 CF8；

Body Material:ASTM A216 WCB；ASTM A351 CF8；

产品的设计、制造按API6D的规定；检查试验按API6D的规定；法兰连接尺寸按 ASME 的

规定；结构长度按API6D的规定；

Designed and manufactured according to API6D; Inspected and tested according

to API6D;

Flange ends according to ASME ; Face to face according to API 6D

适用介质：水、蒸汽、油品等。

Suitable Medium: Water, Steam, Oil etc

●对WCB材料，适用操作温度：（0～150）℃

For WCB material: suitable temperature for operation: （0～150）℃

在适用操作温度范围中最大操作压力分别见表1 表1

Maximum operation pressure based on suitable temperature for operation: Form 1:

●对CF8材料，适用操作温度：（0～150）℃

For CF8 material: suitable temperature for operation: （0～150）℃

》

在适用操作温度范围中最大操作压力分别见表1 表1

Maximum operation pressure based on suitable temperature for operation: Form 1:

三作用原理及结构特点 Working Principal and Structural Features

1 作用原理：通过手柄或蜗轮带动阀杆和球体旋转90°，以达到密封副之间的开启和关

闭。

Working principal: Drive the shaft and ball rotate 90 degree through operating the lever, to reach the openness and closeness of the seats.

2 结构特点：Structural features

a 结构形式：螺栓连接阀体、阀盖，螺栓连接压盖的浮动球和固定球阀。

Structural feature: Bolted body, bolted bonnet, bolted gland floating ball valve and

trunnion ball valve.

b 操作方式：手轮和蜗轮操作。

Operation mode: handwheel and gear operation.

|

c 连接形式：凸面法兰连接。

Connection form: Raised Flange (RF)

d 密封面采用聚四氟乙烯（PTFE），耐磨，耐腐蚀、抗冲刷性好、密封可靠、使用寿命

长。

Sealing face adopts PTFE, anti-friction, anti-corrosion, anti-abrasion, good sealing, long service life.

e 采用聚四氟乙烯填料环，密封可靠，操作轻便灵活。

Adopt PTFE packing ring, good sealing and easy operation.

f 阀体、盖之间垫片采用聚四氟乙烯材料，密封可靠。

Gasket between valve body and bonnet is PTFE, good sealing.

g 阀门通道为全径直通式，故流体阻力小。

Valve cavity is Full port straight type, the fluid resistance is very small.

1

.

四结构图

Structure chart

球阀外形结构图

Ball Valve Configuration